Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of microstructural size on the thermal shock behavior of Al2O3-Er3Al5O12 directionally solidified eutectics

  • Nie, Y.
  • Oliete, P.B.
  • Merino, R.I.
We analyze the thermal shock resistance of directionally solidified eutectics. When quenching in water, the resistance starts to deteriorate with temperature differences in the range 260 to 300 K, almost independent of the microstructure size (or initial flexural strength). Unlike other strong, dense ceramics, the loss of strength is gradual upon quenching in boiling water. The onset of crack propagation seems to be controlled by the mismatch of the thermal and elastic properties of the component phases, while the length of the propagated cracks is limited by their quantity, which is estimated to scale approximately with the interface density.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Directionally solidified Ni doped MgO-MgSZ eutectic composites for thermophotovoltaic devices

  • Sola, D.
  • Oliete, P.B.
  • Peña, J. I.
  • Merino, R.I.
Ni-doped MgO-MgSZ eutectic composites were investigated as selective emitters for thermophotovoltaic devices. MgO-MgSZ:Ni eutectic rods were directionally solidified at 25 and 500 mm/h using the laser floating zone technique. Microstructure was strongly dependent on the growth rate, the size of the eutectic phases decreased as the growth rate increased. A hardness of ~11 GPa and a fracture toughness of ~1.6 MPa were obtained from indentation techniques, not showing dependence on the growth rate. Flexure strength increased from ~400 MPa in samples grown at 25 mm/h up to ~1 GPa for those solidified at 500 mm/h, which was attributed to the decrease of the phase size. Thermal emission of eutectic composites was studied up to 1400 °C. An intense broad emission band centred in 1.5 µm matching with the sensitive region of the GaSb photoconverter was found. The selective emission was ascribed to the de-excitation of the thermally excited Ni2+ ions.