Skip to main content

MATERIALES Y SISTEMAS DE REFRIGERACION MAGNETICA

MAT2013-44063-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of the magnetocaloric effect in Heusler alloys: study of Ni50CoMn36Sn13 by calorimetric techniques

  • Palacios, Elias
  • Bartolomé, Juan
  • Wang, GaoFeng
  • Burriel, Ramón
  • Skokov, Konstantin P.
  • Taskaev, Sergey
  • Khovaylo, Vladimir
This is an open access article distributed under the Creative Commons Attribution License., Direct determinations of the isothermal entropy increment, −ΔST, in the Heusler alloy Ni50CoMn36Sn13 on demagnetization gave positive values, corresponding to a normal magnetocaloric effect. These values contradict the results derived from heat-capacity measurements and also previous results obtained from magnetization measurements, which indicated an inverse magnetocaloric effect, but showing different values depending on the technique employed. The puzzle is solved, and the apparent incompatibilities are quantitatively explained considering the hysteresis, the width of the martensitic transition and the detailed protocol followed to obtain each datum. The results show that these factors should be analyzed in detail when dealing with Heusler alloys., Financial support from Projects MAT2011-23791, MAT2013-44063-R and MAT2014-53921-R from the Spanish MEC, DGA Consolidated Groups E100 and E34, RFBR 12-07-00676-a, RF President MD-770.2014.2, RSF 14-12-00570 and from the Ministry of Education and Science of the Russian Federation in the framework of the Increase Competitiveness Program of MISiS are acknowledged., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical investigation of broadband white-light emission in self-assembled organic-inorganic perovskite (C6H11NH3)2PbBr4

  • Garrot, D.
  • Castro, Miguel
  • Boukheddaden, K.
The performance of hybrid organic perovskite (HOP) for solar energy conversion is driving a renewed interest in their light emitting properties. The recent observation of broad visible emission in layered HOP highlights their potential as white-light emitters. Improvement of the efficiency of the material requires a better understanding of its photophysical properties. We present in-depth experimental investigations of white-light (WL) emission in thin films of the (C6H11NH3)2PbBr4. The broadband, strongly Stokes shifted emission presents a maximum at 90 K when excited at 3.815 eV, and below this temperature coexists with an excitonic edge emission. X-rays and calorimetry measurements exclude the existence of a phase transition as an origin of the thermal behavior of the WL luminescence. The free excitonic emission quenches at low temperature, despite a binding energy estimated to 280 meV. Time-resolved photoluminescence spectroscopy reveals the multicomponent nature of the broad emission. We analyzed the dependence of these components as a function of temperature and excitation energy. The results are consistent with the existence of self-trapped states. The quenching of the free exciton and the thermal evolution of the WL luminescence decay time are explained by the existence of an energy barrier against self-trapping, estimated to ∼10 meV., This work was supported by the PHC MAGHREB program no. 13MAG08&30255ZJ, the “Agence Nationale de la Recherche” (ANR project BISTA-MAT: ANR-12-BS07-0030-01), Spanish MINECO (through the grant MAT2013-44063-R), Université de Versailles Saint-Quentin-En-Yvelines, CNRS, and Université de Sfax, which we deeply acknowledge., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermophysical characterization of 1-ethylpyridinium triflate and comparison with similar ionic liquids

  • García-Andreu, María
  • Castro, Miguel
  • Gascón, Ignacio
  • Lafuente, Carlos
We present here a comprehensive thermophysical study of the piridynium-based ionic liquid: 1-ethylpyridinium triflate. Density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, kinematic viscosity and electrical conductivity have been determined in the temperature range (293.15–338.15 K) and at pressure of 0.1 MPa, density was also measured in the pressure range (0.1–40 MPa) at T = 303.15 K. From these values, some derived properties have been calculated. In addition the thermal behaviour around the melting point has been registered. All these properties have been discussed and compared with those of two similar ionic liquids, 1-ethylpyridinium bis(trifluoromethylsulfonyl)imide and 1-butylpyridinium triflate., Authors acknowledge financial support from Gobierno de Aragón and Fondo Social Europeo “Construyendo Europa desde Aragón” (E-54, E-100) and Ministerio de Economía y Competitividad (CTQ2013-44867-P, MAT2013-44063-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gadolinium-doped magnetite nanoparticles from a single-source precursor

  • Douglas, F. J.
  • MacLaren, D. A.
  • Andreu, Irene
  • Berry, Catherine Cecilia
  • Castro, Miguel
  • Murrie, Mark
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.-- et al., An iron and gadolinium-containing bimetallic polynuclear complex was used as a single source precursor in the synthesis of gadolinium-doped magnetite nanoparticles (Gd:FeO). The synthesis produces well defined octahedral particles (12.6 ± 2.6 nm diameter) with a gadolinium content in the region of 2 mol%. The nanoparticles showed a value of the specific absorption rate of 3.7 ± 0.6 W g under low-amplitude radiofrequency magnetic field excitation, and moderate biocompatibility, suggesting that these particles are viable candidates for magnetic hyperthermia applications., FJD gratefully acknowledges a scholarship from the University of Glasgow and DAM a fellowship from the UK Engineering and Physical Sciences Research Council (grant ref. EP/I00419X/1). IA was supported by a JAE-Predoc 2010 (CSIC program “Junta para la ampliación de estudios”), co-funded by the European Social Fund. We also acknowledge financial support by the Spanish MEC (MAT2011-24284) and MINECO (Project MAT2013-44063-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Gd polarization on the large magnetocaloric effect of GdCrO4 in a broad temperature range

  • Palacios, Elias
  • Tomasi, Corrado
  • Sáez-Puche, R.
  • Dos Santos-García, Antonio J.
  • Fernández-Martínez, F.
  • Burriel, Ramón
The ferromagnetic zircon-type phase of GdCrO4 presents high values for the magnetocaloric (MC) parameters. This compound has large isothermal entropy changes ΔST under the magnetic field action in a wide temperature range, from 5 to 35 K, reaching a maximum |ΔST|=29.0±0.1J/kgK at 22 K, for a field increment ΔB=9 T. It orders ferromagnetically at TC=21.3K via the Cr-Cr exchange interaction and shows a second transition at 4.8 K due to the ordering of the Gd sublattice. The large MC effect is enhanced by the polarization of the Gd3+ ions by the Cr5+ ones via a weaker Gd-Cr interaction. This effect is an interesting feature to be considered in the search for new compounds with a high MC effect in the range of liquid hydrogen or natural gas, regarding the liquefaction of gases by magnetization-demagnetization cycles. This paper contains experimental measurements of magnetization, heat capacity, and direct determinations of the MC effect. The magnetic contribution to the heat capacity Cm has been obtained after subtracting the lattice component. Approximate values for the exchange constants J1 (Cr-Cr) and J3 (Gd-Cr) have been deduced from Cm., This work has been funded by the Spanish MINECO through Projects No. MAT2013-44063-R and No. MAT2013-44964-R, DGA Consolidated Group E100, and Comunidad de Madrid Project No. S2009/PPQ-1626., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comprehensive study of a versatile magnetic refrigeration demonstrator, Une étude exhaustive d'un démonstrateur de froid magnétique modulable

  • Velázquez, David
  • Estepa, L. C.
  • Palacios, Elias
  • Burriel, Ramón
A versatile room temperature reciprocating magnetic refrigeration demonstrator has been designed, built and tested in order to evaluate the influence of different running parameters and to check suitable magnetocaloric materials for cooling at room temperature. A comprehensive study has been done with Gd spheres of 0.2-0.4 mm diameter arranged as a double regenerator with 15 g each. A Halbach Nd2e14B permanent magnet with a slot of 10 mm width has been used to generate the magnetic field with a maximum value of 1.4 T. The heat transfer fluid is a mixture of water and ethylene glycol in a 75-25 percentage. The demonstrator achieves a maximum no-load temperature span close to 20 K, with a regeneration ratio of ξ = 4.1, and a maximum cooling power Qc = 6 W at zero temperature span. COP values have been shown and different thermodynamic AMR cycles have been studied looking for the best parameters., We are grateful to BSH Electrodomesticos España S.A. (Contract 2013/0011), MEC (project MAT2013-44063-R) and DGA (consolidated group E100) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of simulations to thermodynamic properties of materials for magnetic refrigeration

  • Beltrán-López, J. F.
  • Sazatornil, M.
  • Palacios, Elias
  • Burriel, Ramón
A magnetic refrigeration system is a complex system that involves the magnetocaloric effect (MCE) and the heat transfer problems working in a coupled manner. For this purpose, characterization of materials showing MCE is needed. Calorimetric characterization allows the obtention of thermodynamic variables needed for a precise quantification of this effect. More specifically, in systems with continuous magnetic field variation, in order to calculate the heat generation due to MCE, the knowledge of their magnetocaloric parameters—adiabatic temperature change ΔST and isothermal entropy change ΔTS—and the heat capacity C, for every temperature and magnetic field present is needed. In this work, La(Fe1-x-yCoxSiy)13 family materials have been either characterized or interpolated and used in numerical simulations in COMSOL Multiphysics™ software. The characterization was carried out with measurements of ΔTS, ΔST and C and the calculation of other derived parameters, at different temperatures and magnetic fields., The authors acknowledge BSH Electrodomésticos España contract 2013/0011, the Spanish MINECO Project MAT2013-44063R and DGA Consolidated Group E100., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A magnetocaloric composite based on molecular coolers and carbon nanotubes with enhanced thermal conductivity

  • Roubeau, Olivier
  • Natividad, Eva
  • Evangelisti, Marco
  • Evangelisti, Marco
  • Palacios, Elias
In this work we study the assisted translocation of a polymer across a membrane nanopore, inside which a molecular motor exerts a force fuelled by the hydrolysis of ATP molecules. In our model the motor switches to its active state for a fixed amount of time, while it waits for an ATP molecule which triggers the motor, during an exponentially distributed time lapse. The polymer is modelled as a beads-springs chain with both excluded volume and bending contributions, and moves in a stochastic three dimensional environment modelled with a Langevin dynamics at a fixed temperature. The resulting dynamics shows a Michaelis-Menten translocation velocity that depends on the chain flexibility. The scaling behavior of the mean translocation time with the polymer length for different bending values is also investigated., The authors acknowledge funding from the Spanish MINECO and EU FEDER through projects MAT2013-44063-R (E. P.), MAT2014-53961-R (O. R., E. N., G. L.), MAT2015-70868-ERC (O. R.) and MAT2015-68204-R (M. E., G. L.), as well as for a postdoctoral contract (to G. L.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

[MIII2 MII3] n+ trigonal bipyramidal cages based on diamagnetic and paramagnetic metalloligands

  • Sanz, Sergio
  • O'Connor, H. M.
  • Martí-Centelles, V.
  • Comar, P.
  • Pitak, M. B.
  • Coles, Simon J.
  • Lorusso, Giulia
  • Palacios, Elias
  • Evangelisti, Marco
  • Baldansuren, A.
  • Chilton, N. F.
  • Weihe, Høgni
  • McInnes, Eric J. L.
  • Lusby, P. J.
  • Piligkos, Stergios
  • Brechin, Euan K.
A family of five [MIII2MII3]n+ trigonal bipyramidal cages (MIII = Fe, Cr and Al; MII = Co, Zn and Pd; n = 0 for 1–3 and n = 6 for 4–5) of formulae [Fe2Co3L6Cl6] (1), [Fe2Zn3L6Br6] (2), [Cr2Zn3L6Br6] (3), [Cr2Pd3L6(dppp)3](OTf)6 (4) and [Al2Pd3L6(dppp)3](OTf)6 (5) (where HL is 1-(4-pyridyl)butane-1,3-dione and dppp is 1,3-bis(diphenylphosphino)propane) are reported. Neutral cages 1–3 were synthesised using the tritopic [MIIIL3] metalloligand in combination with the salts CoIICl2 and ZnIIBr2, which both act as tetrahedral linkers. The assembly of the cis-protected [PdII(dppp)(OTf)2] with [MIIIL3] afforded the anionic cages 4–5 of general formula [MIII2PdII3](OTf)6. The metallic skeleton of all cages describes a trigonal bipyramid with the MIII ions occupying the two axial sites and the MII ions sitting in the three equatorial positions. Direct current (DC) magnetic susceptibility, magnetisation and heat capacity measurements on 1 reveal weak antiferromagnetic exchange between the FeIII and CoII ions. EPR spectroscopy demonstrates that the distortion imposed on the {MO6} coordination sphere of [MIIIL3] by complexation in the {MIII2MII3} supramolecules results in a small, but measurable, increase of the zero field splitting at MIII. Complete active space self-consistent field (CASSCF) calculations on the three unique CoII sites of 1 suggest DCo ≈ −14 cm−1 and E/D ≈ 0.1, consistent with the magnetothermal and spectroscopic data., EKB thanks the EPSRC for funding, and the Velux Foundations for a Villum Visiting Professor Programme Grant. PJL thanks the Leverhulme Trust (RPG-2015-232). GL, EP and ME thank the Spanish Ministry of Economy, Industry and Competitiveness (MAT2013-44063-R and MAT2015-68204-R). We thank the EPSRC for funding the UK National Crystallography service and the UK National EPR Facility. NFC thanks the Ramsay Memorial Trust for a Research Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Design of a compact rotating magnetic refrigerator

  • Beltrán-López, J. F.
  • Velázquez, David
  • Palacios, Elias
  • Burriel, Ramón
Trabajo presentado al Danish Days on Caloric Materials and Devices, celebrado en Roskilde (Dinamarca) del 2 al 3 de octubre de 2017., The design of a magnetocaloric effect (MCE) refrigerator is a challenging problem. The task turns out a lot more demanding if the target includes a wide temperature span, a compact design and including a modular graded active magnetic regenerator (AMR) that allows using different magnetocaloric material (MCM) combinations. A modular, graded AMR has been designed to allow the use of shorter AMR stacks, lowering in thisway the pressure loss. The AMR consists of eight beds covering 45º each, with alternative activation in groups of four. The magnet is rotated by means of a slewing ring gear and the core, the AMR and, therefore, the fluid distribution system arestatic; no fluid rotaryvalvesare needed. Fluid flow is controlled by means of high speed solenoid valves, which allow the control of the fluid flow sequence by means of software. These valves have a response time of about 20 ms and allow flows of 0.2 l/s at a pressure of 8 bar. The working cycle includes four steps: magnetization with blow, static heat balancing, demagnetization with opposite blow, and static heat balancing. The fluid flow is unidirectional, with no dead volumes. The global flow is constant, but the alternative use of half of the beds, allows the static heat balancing steps. The eight AMR beds work in parallel pairs connected in series with another pair, with the cold spot in between. The cold spot consists of a block of four soldered copper circuits that allow good thermal contact but no fluid mix. Most of the fluid circuit’s elements remain on the hot side to further reduce thermal losses in the cold side. The magnet design follows the general configuration described in. It has been optimized in angular width and direction of each NdFeB sector’s magnetization, resulting in Bmax=1.86 T, Bmin=0.003 T and, for each 45º sector of the AMR, <Bmax>=1.71 T and <Bmin>=0.015 T. Small spheres of MCM with first and second order transitions are used and they have been modelled to carry out simulations using a modified version of the procedure described in., The authors acknowledge BSH Electrodomésticos España contract 2013/0011, the Spanish MINECO project MAT2013-44063R and DGA Consolidated Group E100., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the S(T) diagram of magnetocaloric materials with first-order transition: Kinetic and cyclic effects of Heusler alloys

  • Gottschall, Tino
  • Skokov, Konstantin P.
  • Burriel, Ramón
  • Gutfleisch, Oliver
For magnetocaloric materials the total entropy diagram S(T) in different magnetic fields is of central importance. From such a plot the isothermal entropy change ΔST and the adiabatic temperature change ΔTad can be well-defined. Aim of this work is to investigate the reversible magnetocaloric effect of Heusler alloys under cycling in terms of the S(T) diagram. For this purpose we selected three different Heusler alloys of Ni–Mn–In with transition temperatures between 200 k and room temperature. The S(T) diagrams of the three materials cover all conceivable shapes and are therefore representative for inverse magnetocaloric Heusler alloys. First we comprehensively analyzed the magnetocaloric properties of this model system using calorimetry, magnetometry and direct measurements of the adiabatic temperature change ΔTad and subsequently combined those results into the S(T) diagram. It turns out that under certain measurement conditions significant discrepancies can appear. With the help of in-situ optical microscopy, this effect could be attributed to kinetic relaxation effects in the pure martensite phase before the actual ΔTad experiment. Furthermore we found that the S(T) diagram obtained under continuous heating and cooling fails to describe the reversible magnetocaloric properties of minor loops under cycling. Utilizing cyclic measurements of the adiabatic temperature change together with calorimetric data it is however possible to determine the reversible magnetic field induced entropy change ΔST in fast operation comparable to real device conditions which can be applied to every magnetocaloric material with a first-order transition., This work was supported by DFG (Grant No. SPP 1599), European Community 7th Framework Program (Grant No. 310748 DRREAM), Spanish MINECO (Project MAT2013-44063-R) and DGA (Consolidated Group E100)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of Gd polarization on the large magnetocaloric effect of GdCrO4 in a broad temperature range

  • Palacios, E.
  • Tomasi, C.
  • Sáez-Puche, R.
  • Dos Santos-García, A.J.
  • Fernández-Martínez, F.
  • Burriel, R.
The ferromagnetic zircon-type phase of GdCrO4 presents high values for the magnetocaloric (MC) parameters. This compound has large isothermal entropy changes ¿ST under the magnetic field action in a wide temperature range, from 5 to 35 K, reaching a maximum |¿ST|=29.0±0.1J/kgK at 22 K, for a field increment ¿B=9 T. It orders ferromagnetically at TC=21.3K via the Cr-Cr exchange interaction and shows a second transition at 4.8 K due to the ordering of the Gd sublattice. The large MC effect is enhanced by the polarization of the Gd3+ ions by the Cr5+ ones via a weaker Gd-Cr interaction. This effect is an interesting feature to be considered in the search for new compounds with a high MC effect in the range of liquid hydrogen or natural gas, regarding the liquefaction of gases by magnetization-demagnetization cycles. This paper contains experimental measurements of magnetization, heat capacity, and direct determinations of the MC effect. The magnetic contribution to the heat capacity Cm has been obtained after subtracting the lattice component. Approximate values for the exchange constants J1 (Cr-Cr) and J3 (Gd-Cr) have been deduced from Cm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Application of simulations to thermodynamic properties of materials for magnetic refrigeration: A calorimetric approach to material’s magnetocaloric parameters

  • Beltran-Lopez, J.
  • Sazatornil, M.
  • Palacios, E.
  • Burriel, R.
A magnetic refrigeration system is a complex system that involves the magnetocaloric effect (MCE) and the heat transfer problems working in a coupled manner. For this purpose, characterization of materials showing MCE is needed. Calorimetric characterization allows the obtention of thermodynamic variables needed for a precise quantification of this effect. More specifically, in systems with continuous magnetic field variation, in order to calculate the heat generation due to MCE, the knowledge of their magnetocaloric parameters—adiabatic temperature change (Formula presented.) and isothermal entropy change (Formula presented.)—and the heat capacity (Formula presented.), for every temperature and magnetic field present is needed. In this work, (Formula presented.) family materials have been either characterized or interpolated and used in numerical simulations in COMSOL Multiphysics™ software. The characterization was carried out with measurements of (Formula presented.), (Formula presented.) and (Formula presented.) and the calculation of other derived parameters, at different temperatures and magnetic fields.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of the magnetocaloric effect in Heusler alloys: Study of Ni50CoMn36Sn13 by calorimetric techniques

  • Palacios, Elias
  • Bartolome, Juan
  • Wang, Gaofeng
  • Burriel, Ramon
  • Skokov, Konstantin
  • Taskaev, Sergey
  • Khovaylo, Vladimir
Direct determinations of the isothermal entropy increment, -¿ST , in the Heusler alloy Ni50CoMn36Sn13 on demagnetization gave positive values, corresponding to a normal magnetocaloric effect. These values contradict the results derived from heat-capacity measurements and also previous results obtained from magnetization measurements, which indicated an inverse magnetocaloric effect, but showing different values depending on the technique employed. The puzzle is solved, and the apparent incompatibilities are quantitatively explained considering the hysteresis, the width of the martensitic transition and the detailed protocol followed to obtain each datum. The results show that these factors should be analyzed in detail when dealing with Heusler alloys.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comprehensive study of a versatile magnetic refrigeration demonstrator

  • Velázquez, D.
  • Estepa, C.
  • Palacios, E.
  • Burriel, R.
A versatile room temperature reciprocating magnetic refrigeration demonstrator has been designed, built and tested in order to evaluate the influence of different running parameters and to check suitable magnetocaloric materials for cooling at room temperature. A comprehensive study has been done with Gd spheres of 0.2-0.4 mm diameter arranged as a double regenerator with 15 g each. A Halbach Nd2e14B permanent magnet with a slot of 10 mm width has been used to generate the magnetic field with a maximum value of 1.4 T. The heat transfer fluid is a mixture of water and ethylene glycol in a 75-25 percentage. The demonstrator achieves a maximum no-load temperature span close to 20 K, with a regeneration ratio of ¿ = 4.1, and a maximum cooling power Qc=6 W at zero temperature span. COP values have been shown and different thermodynamic AMR cycles have been studied looking for the best parameters.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

[MIII2MII3]n+ trigonal bipyramidal cages based on diamagnetic and paramagnetic metalloligands

  • Sanz, Sergio
  • O'Connor, Helen M.
  • Martí-Centelles, Vicente
  • Comar, Priyanka
  • Pitak, Mateusz B.
  • Coles, Simon J.
  • Lorusso, Giulia
  • Palacios, Elías
  • Evangelisti, Marco
  • Baldansuren, Amga
  • Chilton, Nicholas F.
  • Weihe, Høgni
  • McInnes, Eric J.L.
  • PLusby, Paul J.
  • Piligkos Stergios
  • Brechin, Euan K.
A family of five [MIII2MII3]n+ trigonal bipyramidal cages (MIII = Fe, Cr and Al; MII = Co, Zn and Pd; n = 0 for 1–3 and n = 6 for 4–5) of formulae [Fe2Co3L6Cl6] (1), [Fe2Zn3L6Br6] (2), [Cr2Zn3L6Br6] (3), [Cr2Pd3L6(dppp)3](OTf)6 (4) and [Al2Pd3L6(dppp)3](OTf)6 (5) (where HL is 1-(4-pyridyl)butane-1,3-dione and dppp is 1,3-bis(diphenylphosphino)propane) are reported. Neutral cages 1–3 were synthesised using the tritopic [MIIIL3] metalloligand in combination with the salts CoIICl2 and ZnIIBr2, which both act as tetrahedral linkers. The assembly of the cis-protected [PdII(dppp)(OTf)2] with [MIIIL3] afforded the anionic cages 4–5 of general formula [MIII2PdII3](OTf)6. The metallic skeleton of all cages describes a trigonal bipyramid with the MIII ions occupying the two axial sites and the MII ions sitting in the three equatorial positions. Direct current (DC) magnetic susceptibility, magnetisation and heat capacity measurements on 1 reveal weak antiferromagnetic exchange between the FeIII and CoII ions. EPR spectroscopy demonstrates that the distortion imposed on the {MO6} coordination sphere of [MIIIL3] by complexation in the {MIII2MII3} supramolecules results in a small, but measurable, increase of the zero field splitting at MIII. Complete active space self-consistent field (CASSCF) calculations on the three unique CoII sites of 1 suggest DCo ˜ -14 cm-1 and E/D ˜ 0.1, consistent with the magnetothermal and spectroscopic data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quantum signatures of a molecular nanomagnet in direct magnetocaloric measurements

  • Sharples, Joseph W.
  • Collison, David
  • McInnes, Eric J. L.
  • Schnack, Juergen
  • Palacios, Elias
  • Evangelisti, Marco
Geometric spin frustration in low-dimensional materials, such as the two-dimensional kagome or triangular antiferromagnetic nets, can significantly enhance the change of the magnetic entropy and adiabatic temperature following a change in the applied magnetic field, that is, the magnetocaloric effect. In principle, an equivalent outcome should also be observable in certain high-symmetry zero-dimensional, that is, molecular, structures with frustrated topologies. Here we report experimental realization of this in a heptametallic gadolinium molecule. Adiabatic demagnetization experiments reach B200 mK, the first sub-Kelvin cooling with any molecular nanomagnet, and reveal isentropes (the constant entropy paths followed in the temperature-field plane) with a rich structure. The latter is shown to be a direct manifestation of the trigonal antiferromagnetic net structure, allowing study of frustration-enhanced magnetocaloric effects in a finite system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optical investigation of broadband white-light emission in self-assembled organic-inorganic Perovskite (c6h11nh3)2pbbr4

  • Yangui, A.
  • Garrot, D.
  • Lauret, J. S.
  • Lusson, A.
  • Bouchez, G.
  • Deleporte, E.
  • Pillet, S.
  • Bendeif, E. E.
  • Castro, M.
  • Triki, S.
  • Abid, Y.
  • Boukheddaden, K.
The performance of hybrid organic perovskite (HOP) for solar energy conversion is driving a renewed interest in their light emitting properties. The recent observation of broad visible emission in layered HOP highlights their potential as white-light emitters. Improvement of the efficiency of the material requires a better understanding of its photophysical properties. We present in-depth experimental investigations of white-light (WL) emission in thin films of the (C6H11NH3)2PbBr4. The broadband, strongly Stokes shifted emission presents a maximum at 90 K when excited at 3.815 eV, and below this temperature coexists with an excitonic edge emission. X-rays and calorimetry measurements exclude the existence of a phase transition as an origin of the thermal behavior of the WL luminescence. The free excitonic emission quenches at low temperature, despite a binding energy estimated to 280 meV. Time-resolved photoluminescence spectroscopy reveals the multicomponent nature of the broad emission. We analyzed the dependence of these components as a function of temperature and excitation energy. The results are consistent with the existence of self-trapped states. The quenching of the free exciton and the thermal evolution of the WL luminescence decay time are explained by the existence of an energy barrier against self-trapping, estimated to -10 meV.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A magnetocaloric composite based on molecular coolers and carbon nanotubes with enhanced thermal conductivity

  • Roubeau, Olivier
  • Natividad, Eva
  • Evangelisti, Marco
  • Lorusso, Giulia
  • Palacios, Elías
In spite of a remarkably large magnetocaloric effect at temperatures below ca. 10 K, molecular coolers are yet to become excellent magnetic refrigerants. Their main limitation is the heat transport across molecules, which is expected to decrease too drastically at cryogenic temperatures. Here, this prediction is corroborated for the [Gd2(OAc)6(H2O)4]4H2O molecular cooler by thermal conductivity experiments and direct measurements of the magnetocaloric effect, together with numerical simulations. As a way out, a hybrid composite material is formed by attaching carboxylate-bridged Gd(III) molecules onto oxidized multi-walled carbon nanotubes. Notably, the molecular component of this composite maintains a large magnetocaloric effect, while the thermal conductivity of oriented composite buckypapers surpasses that of bulk [Gd2(OAc)6(H2O)4]4H2O by a factor of 2–3 below 20 K. Eventually, direct measurements of the magnetocaloric effect on the composite evidence the benefits arising from its higher thermal conductivity, in the form of relatively lower temperatures reached in magnetic refrigeration experiments, for example 1.2 K vs. 1.5 K, respectively, for the oriented composite buckypapers and bulk molecular cooler, starting from 1.96 K and 1 T applied field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetic structure and magnetocalorics of GdPO4

  • Palacios, E.
  • Rodriguez-Velamazan, J.A.
  • Evangelisti, M.
  • McIntyre, G.J.
  • Lorusso, G.
  • Visser, D.
  • de Jongh, L.J.
  • Boatner, L.A.
The magnetic ordering structure of GdPO4 is determined at T=60 mK by the diffraction of hot neutrons with wavelength ¿=0.4696 Å. It corresponds to a noncollinear antiferromagnetic arrangement of the Gd moments with propagation vector k=(1/2,0,1/2). This arrangement is found to minimize the dipole-dipole interaction and the crystal-field anisotropy energy, the magnetic superexchange being much smaller. The intensity of the magnetic reflections decreases with increasing temperature and vanishes at T˜0.8 K, in agreement with the magnetic ordering temperature TN=0.77 K, as reported in previous works based on heat capacity and magnetic susceptibility measurements. The magnetocaloric parameters have been determined from heat capacity data at constant applied fields up to 7 T, as well as from isothermal magnetization data. The magnetocaloric effect, for a field change ¿B=0-7T, reaches -¿ST=375.8mJ/cm3K-1 at T=2.1 K, largely exceeding the maximum values reported to date for Gd-based magnetic refrigerants.