Skip to main content

ELECTRODOS Y ELECTROLITOS PARA ALMACENAMIENTO Y PRODUCCION DE ENERGIA: BATERIAS Y PILAS DE COMBUSTIBLE

MAT2013-46452-C4-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Lead-Free Piezoceramics: Facing a Synthesis Challenge

  • Villafuerte-Castrejón, María-Elena
  • Morán, Emilio
  • Reyes-Montero, Armando
  • Vivar-Ocampo, Rodrigo
  • Peña-Jiménez, Jesús-Alejandro
  • Rea-López, Salvador-Oliver
  • Pardo, Lorena
The search for electroceramic materials with enhanced ferro-pyro-piezoelectric properties and revealing the perovskite type structure has been the objective of a significant number of manuscripts reported in the literature. This has been usually carried out by proposing the synthesis and processing of new compounds and solid solution series. In this work, several methods to obtain ferro-pyro-piezoelectric families of materials featuring the well-known ABO<sub>3</sub> perovskite structure (or related) such as BaTiO<sub>3</sub>, Ba<sub>1–<i>x</i></sub>Ca<i><sub>x</sub></i>Ti<sub>1–<i>y</i></sub>Zr<i><sub>y</sub></i>O<sub>3</sub>, (Bi<sub>0.5</sub>Na<sub>0.5</sub>)TiO<sub>3</sub>, (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> and their solid solutions with different cations either in the A or B positions, are presented. For this kind of materials, the challenge for obtaining a single phase compound with a specific grain size and morphology and, most importantly, with the adequate stoichiometry, will also be discussed. The results reviewed herein will be discussed in terms of the tendency of working with softer conditions, <i>i.e.</i>, lower temperature and shorter reaction times, also referred to as soft-chemistry., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., This research was carried out during the sabbatical year of María Elena Villafuerte-Castrejón at ICMM-CSIC (Madrid, Spain) with the support of PASPA-DGAPA, UNAM and CONACyT-México. MEVC also kindly acknowledge to DGAPA for the financial support of PAPIIT-UNAM under project IN116610-3. Lorena Pardo acknowledges the Spanish CSIC project #201060E069. Emilio Morán thanks Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013-46452-C4-4-R and S2013/MIT-2753, respectively. Armando Reyes-Montero, Rodrigo Vivar-Ocampo, Jesús-Alejandro Peña-Jiménez (PhD Scholarship) and Salvador-Oliver Rea-López (MS. Scholarship) thank to CONACyT-México.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Defect chemistry, electrical properties, and evaluation of new oxides Sr2CoNb1−xTixO6−δ (0≤x≤1) as cathode materials for solid oxide fuel cells

  • Azcondo, María Teresa
  • Yuste, Mercedes
  • Pérez-Flores, Juan Carlos
  • Muñoz-Gil, Daniel
  • García-Martín, Susana
  • Muñoz-Noval, Alvaro
  • Puente-Orench, Inés
  • García-Alvarado, Flaviano
  • Amador, Ulises
The perovskite series Sr2CoNb1−xTixO6−δ (0≤x≤1) was investigated in the full compositional range to assess its potential as cathode material for solid oxide fuel cell (SOFC). The variation of transport properties and thus, the area specific resistances (ASR) are explained by a detailed investigation of the defect chemistry. Increasing the titanium content from x=0–1 produces both oxidation of Co3+ to Co4+ (from 0 up to 40 %) and oxygen vacancies (from 6.0 to 5.7 oxygen atom/formula unit), although each charge compensation mechanism predominates in different compositional ranges. Neutron diffraction reveals that samples with high Ti‐contents lose a significant amount of oxygen upon heating above 600 K. Oxygen is partially recovered upon cooling as the oxygen release and uptake show noticeably different kinetics. The complex defect chemistry of these compounds, together with the compositional changes upon heating/cooling cycles and atmospheres, produce a complicated behavior of electrical conductivity. Cathodes containing Sr2CoTiO6−δ display low ASR values, 0,13 Ω cm2 at 973 K, comparable to those of the best compounds reported so far, being a very promising cathode material for SOFC., We thank Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013‐46452‐C4‐1‐R, MAT2013‐46452‐C4‐4‐R, and S2013/MIT‐2753, respectively. Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional are also acknowledged for financing the project MAT2016‐78362‐C4‐1‐R. We acknowledge CSIC, ILL and ESRF for financial support and facilitate the access to the BM25‐SpLine line at ESRF and D1B diffractometer at ILL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A-site order in rhombohedral perovskite-like oxides La2-xSrxCoTiO6 (0.6 <= x <= 1.0)

  • Gómez-Pérez, A.
  • Ritter, C.
  • Boulahya, K.
  • Muñoz-Noval, A.
  • García-Alvarado, F.
  • Amador, U.
The evolution of the room-temperature structure of the oxide series LaSrCoTiO (0.6 ≤ x ≤ 1.0) was studied as a function of the Sr content using different diffraction techniques and applying the symmetry-adapted modes formalism (AMPLIMODES). The title compounds adopt perovskite-like structures of rhombohedral symmetry with an octahedral tilting scheme (aaa) with either space group R3¯c or R32. The latter symmetry is observed in those cases (for x ≃ 0.6) where additional rock-salt-like ordering of La and Sr is produced in the perovskite A sites. Two composition-driven phase transitions are observed in the whole series LaSrCoTiO (0.0 ≤ x ≤ 1.0). Using the concept of internal pressure, the effect of doping with Sr on the structure can be properly discussed. Both phase transitions seem to be of first order since they can be associated with discontinuities either in the entropy or in the structure. The first transition (P2/n → Pnma) occurs as the B cations become totally disordered. Along the whole compositional range the modes responsible for the out-of-phase tilting of BO6 octahedra remain active, but those associated with the in-phase octahedral tilting vanish for x ≥ 0.6, this being associated with the second transition (Pnma → R3¯c). Finally, for x = 1.0 the three pseudo-cubic cell parameters become very similar, pointing to a transition to a cubic structure which could be obtained by applying pressure or raising the temperature., We thank Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013-46452-C4-1-R, MAT2013-46452-C4-4-R, PIB2010JP-00181 and S2013/MIT-2753, respectively. Financial support from Universidad San Pablo is also acknowledged. We acknowledge Consejo Superior de Investigaciones Científicas for financial support and for provision of synchrotron radiation facilities, and we would like to thank beamline staff for assistance in using the BM25-SpLine line.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Piezoelectric ceramics of the (1 - x)Bi0.50Na0.50TiO3-xBa0.90Ca0.10TiO3 lead-free solid solution: Chemical shift of the morphotropic phase boundary, a case study for x = 0.06

  • Vivar-Ocampo, Rodrigo
  • Pardo, Lorena
  • Ávila, David
  • Morán, Emilio
  • González, Amador M.
  • Bucio, Lauro
  • Villafuerte-Castrejón, María-Elena
Research and development of lead-free piezoelectric materials are still the hottest topics in the field of piezoelectricity. One of the most promising lead-free family of compounds to replace lead zirconate-titanate for actuators is that of BiNaTiO (BNT) based solid solutions. The pseudo-binary (1 - x)BiBiNaTiO-xBaCaTiO system has been proposed for high temperature capacitors and not yet fully explored as piezoelectric material. In this work, the solid solution with x = 0.06 and y = 0.10 was obtained by two different synthesis routes: solid state and Pechini, aiming at using reduced temperatures, both in synthesis (<800 °C) and sintering ( < 1150 °C), while maintaining appropriated piezoelectric performance. Crystal structure, ceramic grain size, and morphology depend on the synthesis route and were analyzed by X-ray diffraction, together with scanning and transmission electron microscopy. The effects of processing and ceramic microstructure on the structural, dielectric, ferroelectric, and piezoelectric properties were discussed in terms of a shift of the Morphotropic Phase Boundary, chemically induced by the synthesis route., R. Vivar-Ocampo would like to thank CONACyT-México for providing a PhD scholarship. M.E. Villafuerte-Castrejón also kindly acknowledges the financial support of PAPIIT-UNAM by DGAPA under project IN 102715. E. Morán and D. Ávila thank Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013-46452-C4-4-R and S2013/MIT-2753. A. M. González thanks to Ministerio de Economia y Competitividad for funding the project MAT2013-40722-R. Villafuerte-Castrejón and the Short Stay of R. Vivar-Ocampo at ICMM-CSIC (Madrid, Spain) with the support of PASPA-UNAM and CONACYT.