Skip to main content

DESARROLLO DE MATERIALES ELASTOMERICOS AVANZADOS PARA BANDAS DE RODAMIENTO DE NEUMATICOS

MAT2014-52644-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Physical properties of biaxially oriented poly(ethyleneterephtalate) irradiated at different temperatures and doses with electron beam

  • Adema, E.
  • Rubio Hernández-Sampelayo, Alejandra
  • Báez-García, José Eduardo
  • Miranda, J.
  • Labrada-Delgado, G. J.
  • Marcos-Fernández, Ángel
The electron beam irradiation of a biaxially oriented PET film was carried out in air over a range of 50¿3000 kGy at different temperatures and a dose rate of 4.48 kGy min-1. The effects of the irradiation at temperatures above and below the glass transition temperature (Tg) on the thermal and mechanical properties were studied. Melting temperature decreased slightly and crystallization temperature and crystallinity increased significantly with the increase in dose, more at higher irradiation temperature, whereas Tg did not show any significant change with dose or temperature. Mechanical properties were adversely affected by irradiation. Stress and strain at break were strongly reduced, more at higher irradiation temperature, and Young's Modulus slightly increased with the increase in dose. The changes in properties were related to the chain scission produced by the electron beam irradiation leading to a decrease in molecular weight., We acknowledge the financial support of DGAPA-PAPIIT-UNAM Grant IN-103516 in México and Ministry of Science and Innovation Grant MAT2014-52644-R in Spain. We acknowledge the technical support provided by M. Vásquez and J. Galindo from IF-UNAM., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(-caprolactone) diols (HOPCLOH) and their poly(ester-urethane)s (PEUs): The effect of linear aliphatic diols [HO-(CH2)m-OH] as initiators

  • Báez-García, José Eduardo
  • Marcos-Fernández, Ángel
  • Martínez Richa, Antonio
  • Galindo-Iranzo, Plácido
α,ω-Hydroxy telechelic poly(ε-caprolactones) were prepared by ring-opening polymerization of the ε-caprolactone catalyzed by ammonium decamolybdate in the presence of different aliphatic diols [HO–(CH2)m–OH, where m ¼ 2, 4, 6, 8, 10, 12, 14, and 16] as initiators to obtain a family of α,ω- hydroxy telechelic poly(ε-caprolactone) [HO–PCL–O–(CH2)m–O–PCL–OH, m ¼ 2, 4, 6, 8, 10, 12, 14, and 16]. The content of the alkyl group (AG) (–(CH2)m–) had an important effect on the crystallinity (xi) of α,ω-hydroxy telechelic poly(ε-caprolactone), showing a proportional relationship. In poly (ester-urethanes) derived from α,ω-hydroxy telechelic poly(ε-caprolactones) and 1,6- hexamethylene diisocyanate, the AG also showed a similar effect on the xi and eventually on the mechanical properties, increasing the values of the modulus. Therefore, AG content was a factor to induce a plastic behavior in poly(ester-urethanes). The effect of AG on the water uptake of poly(ester-urethanes) after 1 week was negligible., José E. Báez thanks the “Programa para el Desarrollo Profesional Docente (PRODEP, Protocolo 166155)”, Dirección de Apoyo a la Investigación y al Posgrado (DAIP) at University of Guanajuato (UG), Consejo Nacional de Ciencia y Tecnología (CONACYT) and “Sistema Nacional de Investigadores (SNI)” in Mexico for financial support of the work. José E. Báez also thanks Ángel Marcos-Fernández for believing in these ideas and providing financial support for the reagents. José E. Báez also thanks the UG for the recent opportunity to work as an Assistant Professor. Marvin was used for drawing, displaying, and characterizing chemical structures, substructures, and reactions (Marvin Sketch 6.1.3, 2013, ChemAxon; http://www.chemaxon.com); a free software program with an academic license was provided by ChemAxon. Finally, José E. Báez thanks to MSc Paulina Lozano and Dr. Ricardo Navarro Mendoza for the acquisition of SEM micrographs in the “National Laboratory for the Characterization of Physicochemical Properties and Molecular Structure” at the University of Guanajuato. Ángel Marcos-Fernández would like to thank the Ministry of Economy and Competitiveness (MINECO) for the financial support of this work within the framework of the Plan Nacional de IþDþI through the research project MAT2014-52644-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and characterization of photo-crosslinkable linear segmented polyurethanes based on coumarin

  • Seoane Rivero, Rubén
  • Navarro Crespo, Rodrigo
  • Bilbao, Pilar
  • Gondra, Koldo
  • Cuevas, José María
  • Marcos-Fernández, Ángel
Linear segmented polyurethanes with 10% weight of coumarin groups within the soft segment, the hard segment or equally distributed between both segments were successfully prepared. These polyurethanes, based on polycaprolactones, isophorone diisocyanate, butanediol and a dihydroxylated coumarin monomer, were completely amorphous and homogeneous with a single phase morphology. In non-irradiated polyurethanes Tg value varied linearly with hard segment content that in turn was the main factor influencing the mechanical properties. Photodimerization at 354 nm produced crosslinked materials with little change on the Tg and outstanding mechanical properties, as high as 54 MPa, better than that of any other coumarincontaining polymer described., The authors would like to thank the Ministry of Economy and Competitiveness – Spain (MINECO) for the financial support of this work within the framework of the Plan Nacional de I+D+I through the research projects MAT2013-48059-C2 and MAT2014-52644- R and the INNPACTO project IPT-2012-0324-420000. Also, this work has been supported by programme Technology Centres Foundation Iñaki Goenaga and the Regional Government of Madrid, Spain (S2013/MIT-2862)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The shape-memory effect in ionic elastomers: fixation through ionic interactions

  • González-Jiménez, Antonio
  • Alonso Malmierca, Marta
  • Bernal-Ortega, Pilar
  • Posadas, Pilar
  • Pérez-Aparicio, Roberto
  • Marcos-Fernández, Ángel
  • Mather, Patrick T.
  • Valentín, Juan L.
Shape-memory elastomers based on a commercial rubber cross-linked by both ionic and covalent bonds have been developed. The elastomeric matrix was a carboxylated nitrile rubber (XNBR) vulcanized with magnesium oxide (MgO) providing ionic interactions that form hierarchical structures. The so-named ionic transition is used as the unique thermal transition responsible for the shape-memory effect (SME) in these elastomers. These ionic interactions fix the temporary shape due to their behavior as dynamic cross-links with temperature changes. Covalent cross-links were incorporated with the addition of different proportions of dicumyl peroxide (DCP) to the ionic elastomer to establish and recover the permanent shape. In this article, the SME was modulated by modifying the degree of covalent cross-linking, while keeping the ionic contribution constant. In addition, different programming parameters, such as deformation temperature, heating/cooling rate, loading/unloading rate and percentage of tensile strain, were evaluated for their effects on shape-memory behavior., The authors thank CICYT (MAT2011-23476 and MAT2014-52644-R projects) and Consejo Superior de Investigaciones Cientifı´cas, CSIC (201660E088 project) for the financial support of this work. MAM would also like to express her gratitude to CSIC for her fellowships Jae-Pre-088. AGJ would also like to express his gratitude to CSIC and MECD (Spain) for his Jae-Pre-CP and FPU fellowships, respectively. JLV thanks Ministerio de Ciencia e Innovacio´n (Spain) for his Ramo´n y Cajal contract. PTM thanks Syracuse University and the Syracuse Biomaterials Institute for facilities provided for MAM’s extended visit, as well as support from the National Science Foundation, NSF CMMI-1334658., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Ionizing Radiation on the Chemical Structure and the Physical Properties of Polycaprolactones of Different Molecular Weight

  • Navarro Crespo, Rodrigo
  • Burillo, G.
  • Adem, E.
  • Marcos-Fernández, Ángel
Polymers used in the biomedical sector can be exposed to ionizing radiation (X-ray, gamma) in vivo as implants or ex vivo for sterilization purposes (gamma, electron beam). This ionizing radiation can, at certain levels, cause degradation of the polymer. Polycaprolactones (PCL) of different molecular weights were irradiated with electron beam and the changes in their chemical structure and physical properties with the dose were evaluated. Electron beam irradiation produced crosslinking and chain scission in the PCL chain without significant predominance of one mechanism over the other. Minimum dose for gelation decreased with the increase in PCL molecular weight whereas crosslinking efficiency was almost independent of PCL molecular weight. Carboxylic groups, hydroxyl groups and new saturated hydrocarbon species were detected by proton nuclear magnetic resonance (NMR). These species were consistent with a mechanism where chain scission could take place at any bond in the PCL chain with preference in the ¿COO¿CH2¿ bond. Crosslinking decreased significantly the crystallization temperature of PCL. Tensile properties decreased continuously with the increase in dose. Irradiation with gamma rays produced a faster decay in mechanical properties than electron beam., The authors acknowledge the financial support of DGAPA-PAPIIT-UNAM grant IN-103516 in México and Ministry of Economy and Competitiveness (MINECO) grants MAT2014-52644-R and MAT2017-87204-R in Spain. We also acknowledge the technical support provided by MargaritoVásquez and Jesùs Galindo from Instituto de Física-UNAM in the irradiation of the samples with electrons and by Francisco García Flores from Instituto de Ciencias Nucleares-UNAM in the irradiation of the samples with gamma radiation, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microscopic State of Polymer Network Chains upon Swelling and Deformation

  • Naumova, A.
  • Agudelo, D. C.
  • Villar, Marcelo A.
  • Vega, Daniel A.
  • Valentín, Juan L.
  • Saalwächter, Kay
We use low-resolution proton NMR to probe the chain deformation in swollen and nonlinearly deformed vulcanized rubber and end-linked PDMS networks on a microscopic level, extending earlier work focusing on uniaxial stretching and isotropic dilation upon swelling toward biaxial deformation and deformation of swollen samples. Previous studies have revealed that chain deformation in bulk samples is best described by tube models, and that chains in swollen samples deform affinely after an initial desinterspersion stage, upon which entanglement-related packing effects are relieved. We test whether a subsequent deformation may also be closer to affine, and find that this is not the case. Unexpectedly, nonisotropic deformation of swollen samples also follows tube-model predictions, which is explained by a dominance of structural inhomogeneities and significant reorganization of the topological constraints active in the swollen and possibly even the bulk state., Partial funding was provided by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) in the framework of the projects SA982/6-1, SA982/9-1, and SA982/ 11-1. A.N. thanks the team at Bahıá Blanca for the generous support provided during her research stay. J.L.V. acknowledges the support provided by the MAT2014-52644-R, MAT2017- 87204-R, and 201860E045 projects., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

NEW INSIGHTS IN THE CNT-RUBBER STRUCTURE FOR A RATIONAL DEVELOPMENT OF ADVANCED MATERIALS

  • Valentín, Juan L.
  • Bernal-Ortega, Pilar
  • Bernal, M. Mar
  • González-Jiménez, Antonio
  • Navarro Crespo, Rodrigo
In this work, a systematic characterization of CNT rubber structure has been performed by using a combination of exper i- mental techniques (including advanced 1 H time domain NMR methods) and the last developed analysis procedures (including stress an d strain amplification factors) in order to improve the understanding about the mechanical and viscoelastic properties of these nano composites. According the obtained results, these promising materials could have some li m itations to be applied in high per formance tire tread compounds (mainly related to the rolling resistance and fuel consumption) because of the difficulty of dispersion of CNT in ru b- ber matrices (high filler networking), the strong influence of CNT in the vulcanization process (low cross li nk density and high network defects) and the nature of filler rubber interactions (high energy dissipation associated to the rupture of filler rubber interactions at high strain amplitudes). To overcome th ese issue s , the CNT have been surface modified with oxygen bearing groups and sulfur., The authors thank the financial support provided by the Ministerio de Ciencia e Innovación (MCINN) through the Project MAT2014 52644 R, MAT2017 87204 and an FPI grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New insight into structure-property relationships of natural rubber and styrene-butadiene rubber nanocomposites filled with MWCNT

  • Bernal-Ortega, Pilar
  • Bernal, M. Mar
  • González-Jiménez, Antonio
  • Posadas, P.
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
The outstanding properties of carbon nanotubes (CNT) have generated a lot of interest at a scientist and industrial level. CNT have attracted great attention due to their exceptional mechanical, electrical and thermal properties and also for their large aspect ratio, that is, small size and higher surface area. On this regard, CNT-rubber composites have been prepared, using natural rubber (NR) and styrene butadiene rubber (SBR) as matrices, and varying the amount of filler from 0 to 20 phr. In order to understand and optimize the properties of these materials, a fundamental and systematic study has been done with the aim of quantifying the relative contribution of the different factors that determine the reinforcing effect of these nanoparticles. The results obtained from the different characterizations of the composites (study of the electrical and mechanical properties, Payne effect, dynamical mechanical analysis, low field NMR and swelling experiments) reveal a good filler-rubber interaction, a high reinforcement effect, and an increase on the electrical conductivity of the compounds. However, all these improvements are limited by the detrimental effect of the CNT on the vulcanization process., The authors thank Spanish Ministerio de Economia y Competitividad by the financial support of this work (project references MAT2014- 52644-R and MAT2017-87204-R). Pilar Bernal-Ortega thanks the Ministerio de Ciencia e Innovación (Spain) for his FPI contract (ref. BES- 2015-071516). Authors JLV, PP and RN are members of the SusPlast platform from the Spanish National Research Council.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shape-Memory Composites Based on Ionic Elastomers

  • González-Jiménez, Antonio
  • Bernal-Ortega, Pilar
  • Martín Salamanca, Fernando
  • Valentín, Juan L.
Shape-memory polymers tend to present rigid behavior at ambient temperature, being unable to deform in this state. To obtain soft shape-memory elastomers, composites based on a commercial rubber crosslinked by both ionic and covalent bonds were developed, as these materials do not lose their elastomeric behavior below their transition (or activation) temperature (using ionic transition for such a purpose). The introduction of fillers, such as carbon black and multiwalled carbon nanotubes (MWCNTs), was studied and compared with the unfilled matrix. By adding contents above 10 phr of MWCNT, shape-memory properties were enhanced by 10%, achieving fixing and recovery ratios above 90% and a faster response. Moreover, by adding these fillers, the conductivity of the materials increased from ~10<sup>−11</sup> to ~10<sup>−4</sup> S·cm<sup>−1</sup>, allowing the possibility to activate the shape-memory effect with an electric current, based on the heating of the material by the Joule effect, achieving a fast and clean stimulus requiring only a current source of 50 V., This research was funded by Ministerio de Ciencia e Innovación (MAT2011-23476, PID2020-119047RB-I00 y PLEC2021-007793), Ministerio de Economía y Competitividad (MAT2014-52644-R), and CSIC (201860E045)., Peer reviewed