Skip to main content

DISEÑO DE RECIPIENTES DE ACERO DE ALTA Y MEDIA RESISTENCIA RESISTENTES A LA FRACTURA Y FATIGA PARA CONTENER HIDROGENO A PRESION

MAT2014-58738-C3-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE BURGOS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ceramic materials characterization using miniature mechanical tests: comparison between B3B and SPT tests

  • Quintana, C.
  • Rodríguez, C.
  • Belzunce, F.J.
  • Caballero Cuesta, Amador
  • Baudín de la Lastra, Carmen
Strength of ceramic components is determined by processing, therefore, test methods that allow analysing their actual mechanical behaviour are needed. The miniature mechanical tests ballon three balls (B3B) and small punch (SPT) are compared using commercial lead zirconate titanate (PZT) piezo-ceramic discs. The Weibull distributions of strength were obtained and the fracture surfaces were observed by scanning electron microscopy. The different approaches for the calculation of strength values are discussed. The adequacy of the small punch test for the determination of strength is demonstrated. Results for SPT and B3B tests are comparable considering the effective volumes calculated using the Weibull relationships. The Timoshenko equation for strength is proposed for the calculus of strength due to its simplicity and the fact that the calculated values for B3B and SPT geometries are not dependent on the radius of the uniform loading central area. © 2019 Elsevier Ltd, Projects MAT2014-58738-C3 and CSIC PIE 201660E097C. C. Quintana thanks the financial support from the Principado de Asturias Regional Government through the Severo Ochoa Scholarship Programme (contract BP17-27 QBC)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

  • Díaz Portugal, Andrés
  • Cuesta Segura, Isidoro Iván
  • Martínez Pañeda, Emilio
  • Alegre Calderón, Jesús Manuel
The electrochemical permeation test is one of the most used methods for characterising hydrogen diffusion in metals. The flux of hydrogen atoms registered in the oxidation cell might be fitted to obtain apparent diffusivities. The magnitude of this coefficient has a decisive influence on the kinetics of fracture or fatigue phenomena assisted by hydrogen and depends largely on hydrogen retention in microstructural traps. In order to improve the numerical fitting of diffusion coefficients, a permeation test has been reproduced using FEM simulations considering two approaches: a continuum 1D model in which the trap density, binding energy and the input lattice concentrations are critical variables and a polycrystalline model where trapping at grain boundaries is simulated explicitly including a segregation factor and a diffusion coefficient different from that of the interior of the grain. Results show that the continuum model captures trapping delay, but it should be modified to model the trapping influence on the steady state flux. Permeation behaviour might be classified according to different regimes depending on deviation from Fickian diffusion. Polycrystalline synthetic permeation shows a strong influence of segregation on output flux magnitude. This approach is able to simulate also the short-circuit diffusion phenomenon. The comparison between different grain sizes and grain boundary thicknesses by means of the fitted apparent diffusivity shows the relationships between the registered flux and the characteristic parameters of traps., The authors gratefully acknowledge financial support from the project MINECO Refs: MAT2014-58738-C3-2-R and RTI2018-096070-B-C33. E. Martínez-Pañeda acknowledges financial support from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7/2007-2013) under REA Grant Agreement No. 609405 (COFUNDPostdocDTU).