Skip to main content

ENCAPSULACION DE PRINCIPIOS ACTIVOS EXTRAIDOS DE FUENTES NATURALES PARA ENVASADO DE ALIMENTOS

MAT2014-59242-C2-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and enzymatic degradation study of poly(epsilon-caprolactone)-based biocomposites from almond agricultural by-products

  • Valdés, Arantzazu
  • Beltrán, Ana
  • Fortunati, Elena
  • Kenny, Jose Mª
  • Garrigos, María Carmen
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Reinforced poly(e-caprolactone) (PCL)/almond skin (AS) biocomposites were prepared by extrusion and injection moulding at different AS contents (0, 10, 20, 30 wt%) in order to revalorize this agricultural residue. AS particles were characterized by field emission scanning electron microscopy (FESEM), attenuated total reflectance infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Hemicelluloses were the first compound thermally degraded (263 +/- 2 degrees C) followed by cellulose (330 +/- 5 degrees C) and lignin (401 +/- 3 degrees C) with a remaining residue of 20% which was associated to the fibre content present in AS. Mechanical, morphological, thermal, and water absorption properties; and enzymatic degradation using Pseudomonas lipase were evaluated for the obtained biocomposites. A significant improvement in Young's modulus with a gain of 73% at 30 wt% AS loading was obtained compared to neat PCL An increase in Shore D hardness and decrease in elongation at break and impact energy were also observed with increasing AS content caused by the reinforcement effect. Lower DSC thermal enthalpies and higher crystallinity were obtained for the biocomposites. Some decrease in thermal stability and higher water absorption values were also found with AS addition. Finally, the presence of AS retarded the enzymatic degradation of PCL, showing neat PCL higher weight loss after 25 days of study followed by PCL with 10 wt% AS. (C) 2016 Elsevier Ltd. All rights reserved., Authors would like to thank "Almendras Llopis S.A" for kindly providing the almond skin by-products as well as to Spanish Ministry of Economy and Competitiveness for financial support (MAT 2015-59242-C2-2-R). A. Valdes acknowledges Conselleria de Educacion (Spain) for ACIF/2010/172 Predoctoral Research Training Grant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Bio-based PLA_PHB plasticized blend films: Processing and structural characterization

  • Armentano, Ilaria
  • Fortunati, Elena
  • Burgos, Nuria
  • Dominici, Franco
  • Luzi, Francesca
  • Fiori, Stefano
  • Jiménez, Alfonso
  • Yoon, Kicheol
  • Ahn, Jisoo
  • Kang, Sangmi
  • Kenny, José María
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
Bio-based films formed by poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with an oligomer of the lactic acid (OLA) were used as supporting matrices for an antibacterial agent (carvacrol). This paper reports the main features of the processing and physico-chemical characterization of these innovative biodegradable material based films, which were extruded and further submitted to filmature process. The effect of the addition of carvacrol and OLA on their microstructure, chemical, thermal and mechanical properties was assessed. The presence of these additives did not affect the thermal stability of PLA_PHB films, but resulted in a decrease in their crystallinity and in the elastic modulus for the active formulations. The obtained results showed the effective presence of additives in the PLA or the PLA_PHB matrix after processing at high temperatures, making them able to be used in active and bio-based formulations with antioxidant/antimicrobial performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Characterization and disintegrability under composting conditions of PLA-based nanocomposite films with thymol and silver nanoparticles

  • Ramos, Marina
  • Fortunati, Elena
  • Peltzer, Mercedes Ana
  • Jiménez, Alfonso
  • Kenny, José María
  • Garrigós, María del Carmen
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
Active nanocomposite films based on poly(lactic acid) (PLA), thymol and silver nanoparticles (Ag-NPs) were prepared and characterized. PLA films containing 6 and 8 wt% thymol and 1 wt% Ag-NPs were processed by extrusion to obtain binary and ternary formulations. The addition of thymol and Ag-NPs modified the PLA thermal, optical and barrier properties; in particular water vapour permeability (WVP), maintaining oxygen transmission rate (OTR) values unchanged. Homogeneous surfaces in all films were obtained as proved by FESEM micrographs. The presence of the active additives enhanced the disintegration rate of PLA under composting conditions, which was completed in 14 days. Results suggest that these nanocomposite films could be considered promising degradable active packaging materials with low environmental impact.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Controlled Release of Thymol from Poly(Lactic Acid)-Based Silver Nanocomposite Films with Antibacterial and Antioxidant Activity

  • Ramos, Marina
  • Beltrán Sanahuja, Ana
  • Fortunati, Elena
  • Peltzer, Mercedes Ana
  • Cristofaro, Francesco
  • Visai, Livia
  • Valente, Artur J.M.
  • Jiménez, Alfonso
  • Kenny, José María
  • Garrigós, María del Carmen
  • Beltrán Sanahuja, Ana|||/items/e050de26-d5fa-4bc8-8092-760c0d8865d0
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
Thymol and silver nanoparticles (Ag-NPs) were used to develop poly(lactic acid) (PLA)-based films with antioxidant and antibacterial performance. Different amounts of thymol (6 and 8 wt%) and 1 wt% Ag-NPs were added to PLA to produce the active films. Ag-NPs and thymol were successfully identified in the nanocomposite structures using spectroscopic techniques. A kinetic study was performed to evaluate the release of thymol and Ag-NPs from the nanocomposites to an aqueous food simulant (ethanol 10%, v/v) at 40 °C. The diffusion of thymol from the polymer matrix was affected by the presence of non-migrating Ag-NPs, which showed non-Fickian release behavior. The ternary system including 1 wt% Ag-NPs and 8 wt% thymol showed clear antibacterial performance by reducing the cell viability of Escherichia coli and Staphylococcus aureus by around 40% after 3 and 24 h of storage at 4, 25, and 37 °C compared to neat PLA. Significant antioxidant behavior of all active films was also confirmed using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method. The obtained nanocomposite films based on PLA and the addition of Ag-NPs and thymol were proven to have combined antioxidant and antibacterial performance, with controlled release of thymol. These formulations have potential applications in the development of innovative and customized active packaging systems to increase the shelf-life of food products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Synthesis and Thermal Characterization of Polyurethanes Obtained from Cottonseed and Corn Oil-Based Polyols

  • Cruz-Aldaco, Karina
  • Flores-Loyola, Erika
  • Aguilar-González, Cristóbal Noé
  • Burgos, Nuria
  • Jiménez, Alfonso
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
The use of vegetable oils to replace fossil feedstock has become an area of opportunity and a priority for study in the field of polymer science. Vegetable oils are considered as renewable resources with high potential, low cost and full availability. The aim of this study is the synthesis of biobased polyols from cottonseed oil (Gossypium barbadanse) and corn oil (Zea mays) as feedstock. Their synthesis was successfully performed, as can be concluded from the determination of their hydroxyl index as well as the structural and thermal characterization carried out in this work. Polyurethanes from biobased polyols were synthesized with two different isocyanates (HDI and MDI) and variable polyol/isocyanate ratio and they were further characterized by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy, concluding that cottonseed and corn oils could be considered as valid alternatives for the synthesis of biobased polymeric materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Gelatin-Based Films and Coatings for Food Packaging Applications

  • Ramos, Marina
  • Valdés, Arantzazu
  • Beltrán Sanahuja, Ana
  • Garrigós, María del Carmen
  • Beltrán Sanahuja, Ana|||/items/e050de26-d5fa-4bc8-8092-760c0d8865d0
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
  • Valdés, Arantzazu|||/items/4014bcef-f512-4723-8000-650f5d9ad7e9
This review discusses the latest advances in the composition of gelatin-based edible films and coatings, including nanoparticle addition, and their properties are reviewed along their potential for application in the food packaging industry. Gelatin is an important biopolymer derived from collagen and is extensively used by various industries because of its technological and functional properties. Nowadays, a very wide range of components are available to be included as additives to improve its properties, as well as its applications and future potential. Antimicrobials, antioxidants and other agents are detailed due to the fact that an increasing awareness among consumers regarding healthy lifestyle has promoted research into novel techniques and additives to prolong the shelf life of food products. Thanks to its ability to improve global food quality, gelatin has been particularly considered in food preservation of meat and fish products, among others.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food Packaging

  • Burgos, Nuria
  • Armentano, Ilaria
  • Fortunati, Elena
  • Dominici, Franco
  • Luzi, Francesca
  • Fiori, Stefano
  • Cristofaro, Francesco
  • Visai, Livia
  • Jiménez, Alfonso
  • Kenny, José María
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
Fully bio-based and biodegradable active films based on poly(lactic acid) (PLA) blended with poly(3-hydroxybutyrate) (PHB) and incorporating lactic acid oligomers (OLA) as plasticizers and carvacrol as active agent were extruded and fully characterized in their functional properties for antimicrobial active packaging. PLA_PHB films showed good barrier to water vapor, while the resistance to oxygen diffusion decreased with the addition of OLA and carvacrol. Their overall migration in aqueous food simulant was determined and no significant changes were observed by the addition of carvacrol and OLA to the PLA_PHB formulations. However, the effect of both additives in fatty food simulant can be considered a positive feature for the potential protection of foodstuff with high fat content. Moreover, the antioxidant and antimicrobial activities of the proposed formulations increased by the presence of carvacrol, with enhanced activity against Staphylococcus aureus if compared to Escherichia coli at short and long incubation times. These results underlined the specific antimicrobial properties of these bio-films suggesting their applicability in active food packaging.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Characterization and enzymatic degradation study of poly(e-caprolactone)-based biocomposites from almond agricultural by-products

  • Valdés, Arantzazu
  • Fenollar, Octavio
  • Beltrán Sanahuja, Ana
  • Balart, Rafael
  • Fortunati, Elena
  • Kenny, José María
  • Garrigós, María del Carmen
  • Beltrán Sanahuja, Ana|||/items/e050de26-d5fa-4bc8-8092-760c0d8865d0
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Valdés, Arantzazu|||/items/4014bcef-f512-4723-8000-650f5d9ad7e9
Reinforced poly(ε-caprolactone) (PCL)/almond skin (AS) biocomposites were prepared by extrusion and injection moulding at different AS contents (0, 10, 20, 30 wt%) in order to revalorize this agricultural residue. AS particles were characterized by field emission scanning electron microscopy (FESEM), attenuated total reflectance infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Hemicelluloses were the first compound thermally degraded (263 ± 2 ºC) followed by cellulose (330 ± 5 ºC) and lignin (401 ± 3 ºC) with a remaining residue of 20 % which was associated to the fibre content present in AS. Mechanical, morphological, thermal, and water absorption properties; and enzymatic degradation using Pseudomonas lipase were evaluated for the obtained biocomposites. A significant improvement in Young´s modulus with a gain of 73 % at 30 wt% AS loading was obtained compared to neat PCL. An increase in Shore D hardness and decrease in elongation at break and impact energy were also observed with increasing AS content caused by the reinforcement effect. Lower DSC thermal enthalpies and higher crystallinity were obtained for the biocomposites. Some decrease in thermal stability and higher water absorption values were also found with AS addition. Finally, the presence of AS retarded the enzymatic degradation of PCL, showing neat PCL higher weight loss after 25 days of study followed by PCL with 10 wt% AS.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

State of the Art of Antimicrobial Edible Coatings for Food Packaging Applications

  • Valdés, Arantzazu
  • Ramos, Marina
  • Beltrán Sanahuja, Ana
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Beltrán Sanahuja, Ana|||/items/e050de26-d5fa-4bc8-8092-760c0d8865d0
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
  • Valdés, Arantzazu|||/items/4014bcef-f512-4723-8000-650f5d9ad7e9
The interest for the development of new active packaging materials has rapidly increased in the last few years. Antimicrobial active packaging is a potential alternative to protect perishable products during their preparation, storage and distribution to increase their shelf-life by reducing bacterial and fungal growth. This review underlines the most recent trends in the use of new edible coatings enriched with antimicrobial agents to reduce the growth of different microorganisms, such as Gram-negative and Gram-positive bacteria, molds and yeasts. The application of edible biopolymers directly extracted from biomass (proteins, lipids and polysaccharides) or their combinations, by themselves or enriched with natural extracts, essential oils, bacteriocins, metals or enzyme systems, such as lactoperoxidase, have shown interesting properties to reduce the contamination and decomposition of perishable food products, mainly fish, meat, fruits and vegetables. These formulations can be also applied to food products to control gas exchange, moisture permeation and oxidation processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Recent Trends in Microencapsulation for Smart and Active Innovative Textile Products

  • Valdés, Arantzazu
  • Ramos, Marina
  • Beltrán Sanahuja, Ana
  • Garrigós, María del Carmen
  • Beltrán Sanahuja, Ana|||/items/e050de26-d5fa-4bc8-8092-760c0d8865d0
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
  • Valdés, Arantzazu|||/items/4014bcef-f512-4723-8000-650f5d9ad7e9
The industrial interest for microencapsulation techniques to produce innovative materials has increased in the last years. Microencapsulation shows several advantages for textile industries since active compounds, such as vitamins, essential oils, antimicrobials and/or antibiotics can be isolated to protect them from environment factors (oxygen, light, moisture and temperature). Microcapsules are also used for the controlled release of fragrances or even heat, to mask undesired properties of the active components and to convert liquid substances into solids with increased compatibility. In this review, the application of microencapsulation techniques to obtain innovative materials for the textile sector has been highlighted. The main known techniques have been briefly described, including interfacial, suspension and in situ polymerizations as well as spray drying, complex coacervation, centrifugal extrusion processes, fluidized-bed-coating and sol-gel techniques. Different mechanisms have been also described based on the different properties offered by permeable or non-permeable capsules. Finally, the development and application of microencapsulation in smart (phase change materials, photochromic, thermochromic and flame retardant microcapsules) and active textiles, including antimicrobials and the use of different additives with pharmaceutical and/or medical properties, insect-repellent systems and fragrant solid carrier materials have been briefly discussed.