Skip to main content

RECUBRIMIENTOS MULTIFUNCIONALES MODIFICADOS CON AGENTES DE RETROALIMENTACION ACTIVA PARA LA PROTECCION DE MATERIALES Y COLECCIONES DEL PATRIMONIO CULTURAL

MAT2015-65445-C2-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical fingerprint of archaeological lead silicate glasses from the voltammetry of microparticles approach

  • Doménech Carbó, Antonio
  • Villegas Broncano, María Ángeles
  • Martínez Ramírez, Sagrario
  • Martínez Pla, Betlem
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a solid-state electrochemical technique, voltammetry of microparticles (VMP), for studying archeological lead glass is described. Upon attachment to graphite electrodes immersed into aqueous acetate buffer, characteristic voltammetric profiles were obtained for submicrosamples of archeological glasses dated between the 9th and 19th centuries. Bivariate and multivariate chemometric analyses of the VMP data allowed us to characterize individual workshops/provenances which enabled a clear discrimination between soda-rich and potash-rich glasses. An analysis of the VMP data, combined by XRF, FESEM, AFM and ATR-FTIR and Micro-Raman spectroscopies, denoted the presence of Pb(IV) centers accompanying network-former and network-modifier Pb(II)., Financial support from the MINECO Projects CTQ2014-53736-C3-1-P, CTQ2014-53736-C3-2-P and MAT2015-65445-C2-2-R, which are supported with ERDF funds is gratefully acknowledged. Likewise financial support of the Comunidad de Madrid and structural funds of the EU through Programa Geomateriales 2 ref. S2013/MIT-2914 is acknowledged. The authors thank the Seccion de Investigacion Arqueologica Municipal de Valencia for kindly authorizing sampling to carry out this research. The authors also thank Dr. Jose Luis Moya Lopez and Mr. Manuel Planes Insausti (Microscopy Service of the Universitat Politecnica de Valencia) for their technical support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical fingerprint of archeological lead silicate glasses using the voltammetry of microparticles approach

  • Doménech-Carbó, A.
  • Villegas Broncano, María Ángeles
  • Agua Martínez, Fernando
  • Martínez-Ramírez, S.
  • Doménech-Carbó, M.T.
  • Martínez, B.
  • Lloyd, I.
9 págs.; 14 figs.; 1 tab., The application of a solid-state electrochemical technique, voltammetry of microparticles (VMP), for studying archeological lead glass is described. Upon attachment to graphite electrodes immersed into aqueous acetate buffer, characteristic voltammetric profiles were obtained for submicrosamples of archeological glasses dated between the 9th and 19th centuries. Bivariate and multivariate chemometric analyses of the VMP data allowed us to characterize individual workshops/provenances which enabled a clear discrimination between soda-rich and potash-rich glasses. An analysis of the VMP data, combined by XRF, FESEM, AFM and ATR-FTIR and Micro-Raman spectroscopies, denoted the presence of Pb(IV) centers accompanying network-former and network-modifier Pb(II). © 2016 The American Ceramic Society, Financial support from the MINECO Projects CTQ2014-53736-C3-1-P,CTQ2014-53736-C3-2-P and MAT2015-65445-C2-2-R, which are supportedwith ERDF funds is gratefully acknowledged. Likewise financial support ofthe Comunidad de Madrid and structural funds of the EU through ProgramaGeomateriales 2 ref. S2013/MIT-2914 is acknowledged. The authors thank the Sección de Investigación Arqueológica Municipal de Valencia for kindly authorizing sampling to carry out this research. The authors also thank Dr.Jose Luis Moya Lopez and Mr. Manuel Planes Insausti (Microscopy Serviceof the Universitat Politécnica de Valencia) for their technical support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design of didactic units on Heritage conservation. What kind of teaching Heritage conservation topics require?, Diseño de una unidad didáctica sobre la conservación del Patrimonio. ¿Qué tipo de enseñanza requieren los temas sobre conservación del Patrimonio?

  • Peña Poza, Javier
  • Gil Puente, Cristina
  • Gómez Mayo, Patricia
  • Conde Moreno, Juan Félix
  • Agua Martínez, Fernando
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
[EN] The subject of teaching Historic and Cultural Heritage in primary and secondary schools has been widely covered in the last few years. However, the specific topic on Heritage conservation has been barely developed despite its transcendence from the point of view of future preservation of Heritage items. This paper presents the theoretical and practical background in which the design of a didactic unit on Heritage conservation has been based. Among the main objectives which are intended to be covered by such a didactic unit are the significance of the Cultural Heritage, the importance of its conservation, the recognition of Heritage locales, when is important to conserve them, differences between conservation and restoration, the influence of environmental conditions and so on. Possible evaluation activities and suitable schools in which the unit could be put into practice are also some of the subjects dealt with in this contribution., [ES] La enseñanza del Patrimonio Histórico y Cultural en los colegios de primaria y secundaria se ha cubierto ampliamente en los últimos años. Sin embargo, el tema específico de la conservación del Patrimonio apenas se ha desarrollado a pesar de su trascendencia desde el punto de vista de la preservación futura de los distintos elementos que conforman el Patrimonio. En este trabajo se presentan los aspectos teóricos y prácticos en los que se ha basado el diseño de una unidad didáctica sobre conservación del Patrimonio. Entre los principales objetivos que pretende cubrir esta unidad destacan el significado del Patrimonio Cultural, la importancia de su conservación, la posibilidad de reconocer lugares con Patrimonio, cuándo es importante conservarlos, las diferencias entre conservación y restauración, la influencia de las condiciones ambientales, etc. Las posibles actividades de evaluación y los colegios más adecuados en los que poner en práctica la unidad didáctica son también alguno de los temas tratados en este trabajo., This work is being carried out under the projects Geomateriales 2 (Ref. S2013/MIT-2914, Regional Government of Madrid and EU structural funds) and MINECO/FEDER MAT2015-65445-C2-2-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lanthanum-Silica Sol-Gel Coatings for Protecting Metallic Materials in Museums: Approaches to Copper, Bronze, Lead and Steel

  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • Gil, Cristina
  • Villegas Broncano, María Ángeles
  • García Heras, Manuel
Museum objects made from metals face the challenge of delaying corrosion in exhibition rooms, showcases and holdings. This study examined some innovative solutions used to protect such items based on sol-gel coatings doped with lanthanum. These coatings were prepared from sols based on TEOS as a precursor. Lanthanum acetate/nitrate was added as a doping agent and corrosion inhibitor. The coatings were deposited upon slabs of copper, bronze, lead and steel, since they are among the most common metals present in museums items. The coatings application was accomplished by immersion-extraction, and the remaining sols were gelled and characterized by Fourier transformed infrared spectroscopy and differential thermal analysis and thermogravimetry. To evaluate the behaviour and resistance of the coatings, tests of accelerated aging were carried out in climatic and Kesternich chambers, as well as under an atmosphere saturated with organic acids and under UV irradiation. The simulated conditions tested were undertaken to approach real conditions inside a conventional museum showcase. The microstructure of the coatings before and after accelerated aging tests was observed through optical and field emission scanning electron microscopies. The results indicated that these coatings can be a useful preventive, conservation avenue to protect copper, bronze and lead items exhibited in museums., J. Rubio, Ceramic and Glass Institute (CSIC) for thermal analysis and infrared spectra. Project MINEICO/FEDER MAT2015-65445-C2-2-R and program Geomateriales 2 ref. S2013/MIT-2914 (CAM-EU) for financial support. TechnoHeritage Network on Science and Technology for the Conservation of Cultural Heritage for professional support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diseño y ejecución de un proyecto didáctico sobre la conservación del Patrimonio Cultural para EI, EP y ESO, Design and implementation of a didactic project about conservation of cultural heritage for pre‐university

  • Gil Puente, Cristina
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
[EN] This study presents a sequence of teaching‐learning focused on the conservation of cultural heritage and adapted to different educational levels. It is carried out with groups of students of Early Children’s Education, second interlevel of Elementary Education and first cycle of Secondary Education of the Regional Community of Madrid. With the set of activities included in the proposal, it is intended that students acquire competences and contents from different areas of knowledge based on the curriculum. For this purpose it has being worked through active methodologies. In this work, in addition to describing the didactic sequence used, the results obtained through different assessment instruments are analyzed and several conclusions are raised, which can be used for their future implementation by teachers., [ES] En este estudio se presenta una secuencia de enseñanza‐aprendizaje enfocada a la conservación de Patrimonio Cultural y adaptada a diferentes niveles educativos. Se lleva a cabo con grupos de estudiantes de Educación Infantil, segundo internivel de Educación Primaria y primer ciclo de Educación Secundaria de la Comunidad de Madrid. Con el conjunto de actividades incluidas en la propuesta se pretende que el alumnado adquiera competencias y contenidos de diferentes áreas de conocimiento en base al currículo, para ello se ha trabajado mediante metodologías activas. En este trabajo, además de describir la secuencia didáctica utilizada, se analizan los resultados obtenidos mediante diferentes instrumentos de evaluación, y se plantean varias conclusiones que pueden servir para su implementación futura por parte del profesorado., Los autores agradecen la inestimable colaboración de los docentes y equipos de dirección del CEIP García Lorca (Alcalá de Henares), Colegio Lagomar (Valdemoro) y CEIPSO Eugenio Muro (Cadalso de los Vidrios). Asimismo, al Programa Geomateriales 2 (S2013/MIT‐2914) financiado por la Comunidad de Madrid y Fondos Estructurales (FSE y FEDER), al proyecto MAT2015‐65445‐C2‐2‐R (MINEICO/FEDER) y al apoyo profesional de TechnoHeritage, Red de Ciencia y Tecnología para la Conservación del Patrimonio Cultural., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Corrosion protection of metallic substrates of historical interest by lanthanum-silica sol-gel coatings

  • García Galván, Federico
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • Villegas Broncano, María Ángeles
  • Galván Sierra, Juan Carlos
  • García Heras, Manuel
The European Corrosion Congress – EUROCORR. Applied Science with constant Awareness, September, 9-13 2018, ICE Krakow, Poland., Lanthanum compounds as doping agents in silica based sol-gel coatings can play as environmentally friendly corrosion inhibitors of metallic surfaces of interest in automotive and/or aeronautical industries. In the framework of an interdisciplinary research project the application of lanthanum-silica sol-gel coatings to metallic surfaces of historical interest is being explored for the first time. This contribution presents such application as far as four different metallic substrates are concerned: copper, bronze, lead, and steel. Coatings were prepared from tetraethoxysilane (TEOS) as precursor, distilled water for hydrolysis, absolute ethanol as solvent and HNO3 as catalyst of the hydrolysis. Two types of coatings were formulated: one of them using lanthanum nitrate as doping agent, and another one using lanthanum tri-acetate. Both coatings were deposited upon either common glass slides or metallic plates from 1.0 to 1.5 mm in thickness of copper, bronze, lead, and steel by dip coating at a constant drawing speed (2.0 mm s-1), under controlled temperature (25°C) and relative humidity (35%). Partial thermal densification was accomplished in a forced air stove at 60°C for 72 h. Low quality plates of these four metals and alloys were selected since they are among the most common substrates of metallic items of historical and Heritage interest. Once coatings were made the remaining sols were gelled at 35°C for 48 h. After that, sol-gel monoliths were powdered for characterization by Fourier transformed infrared spectroscopy (FTIR), differential thermal analysis (DTA) and thermogravimetry (TG). A set of sol-gel coating/metal systems was coated with transparent polyvinylbutyral films to simulate commercial top-coatings. Coatings thickness was evaluated by the interference fringe method. The corrosion resistance of both types of lanthanum-silica sol-gel coatings was studied through cathodic delamination tests and electrochemical impedance spectroscopy (EIS) measurements carried out during immersion of coated samples into a 0.6 M NaCl aqueous solution. In addition, chemical and optical quality was also evaluated by weathering and resistance tests. Microstructure was studied by field emission scanning electron microscopy (FESEM). The results indicate that a concentration of 1 mol % of La2O3 respect to the sol-gel coating formulation is adequate for La3+-ions to remain entrapped in the pores and interstitial sites of the silica matrix and thus behave as active corrosion inhibitors that are released when the metal/coating system is set in contact with the aqueous solution. Moreover, the precipitation of insoluble lanthanum products provides a self-healing mechanism which later plays as a protective barrier for the delay of early corrosion. The electrochemical study by joined cathodic delamination tests and EIS has proved to be very effective in evaluating not only the inhibitor effect of lanthanum compounds but also their self-healing properties., Projects ref. MAT2015-65445-C2-1-R and MAT2015-65445-C2-2-R. Program Geomateriales 2 (S2013/MIT 2914 CAM EU) (Dr. J. Peña-Poza contract).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative study of the optical behavior of a porphyrin encapsulated in sol-gel silica coatings and in solution as a function of pH

  • Carmona, N.
  • Villegas Broncano, María Ángeles
  • Montero, E.F.
  • García, M.A.
  • Llopis, J.
We report a comparative optical spectral study as a function of pH on a porphyrin encapsulated in a sol-gel matrix and in methanol solution. Its response has been discussed in terms of pH-sensitivity as a function of the coatings thickness. Comparison with the behavior of such porphyrin in methanol solution is also included., Optical properties of the porphyrin doped coatings show a quasi linear behavior throughout the pH range studied. Luminescent emission of doped coatings has its maximum peak at a slightly lower wavelength compared with the response in liquid medium (methanol solution), while in the excitation spectra no clear tendency was observed for different pH. Coatings doped with 1 wt% porphyrin fulfill Lambert-Beer law, although the molar absorptivity of the encapsulated porphyrin in the coatings is slightly lower than in methanol solution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electrochemical and microstructural study of La-based protective coatings on metal substrates

  • Doménech-Carbó, A.
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
This is an Accepted Manuscript of a book chapter published by CRC Press in Science and Digital Technology for Cultural Heritage: Interdisciplinary Approach to Diagnosis, Vulnerability, Risk Assessment and Graphic Information Models on 2019, available online: http://www.routledge.com/9780367363680., Proceedings of the 4th International Congress Science and Technology for the Conservation of Cultural Heritage (TechnoHeritage 2019), March 26-30, 2019, Sevilla, Spain., The conservation of metallic items in museums and other Cultural Heritage sites need direct protection, e.g. by means of coatings able to delay the advance of corrosion. This work describes the electrochemical study ( voltammetry of immobilized particles) of a set of metal slabs of copper, brobze, lead and steel protected with La(No3)3 or La (AcO3)3 silica based sol-gel coatings subjected to different induced corrosion tests aimed at detecting changes in the metal probes. Microestructural features of coated and uncoated areas after the ageing treatments were studied by field emisison scanning electron microscopy, The results pointed out the doped coatings ability to behave as an effective protective strategy in the ease of copper, bronze and lead substrates, acting as a barried effect and/or by means of a self-healing mechanism- However, steel samples need thicker coatings since small pits were detected on the coated surface., Financial support of MINECO/FEDER MAT2015-65445-C2-2-R and TOP Heritage re. P2018/NMT-4372 (CAM-EU). Professional support of TechnoHeritage Network on Science and Technology for the Conservation of Cultural Heritage, Peer reviewed