Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural and electrical properties of indium oxide thin films grown by pulsed laser deposition in oxygen ambient

  • Stankiewicz, Jolanta
  • Torrelles, Xavier
  • García Muñoz, Josep Lluís
  • Blasco, Javier
We report results of structural, optical and electrical transport studies of indium oxide (IO) thin films grown by Pulsed Laser Deposition (PLD) under various oxygen gas pressures and using different substrates at 350° C. We find that the morphology and electrical resistivity of these films which are highly transparent changes drastically as Opressure increases into mbar range, irrespective of substrate. A systematic increase in resistivity, coming mainly from a drop in the electron concentration, is observed as oxygen pressure varies from 0.0004 to 1 mbar. This could permit modulation of IO thin–films’ electrical parameters by more than three orders of magnitude suggesting that PLD grown films could be an attractive material for optoelectronic applications., We acknowledge support from grants MAT2012-38213-C02-01 and MAT2012-38213-C02-02, and MAT2015-686760-02-1-P and MAT2015-686760-02-2-P from the Ministerio de Economía y Competividad of Spain. These grants are co-funded by ERDF of European Union. Additional support from Diputación General de Aragón (DGA-CAMRADS) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Double-cell superstructure and vacancy ordering in tensile-strained metallic thin films of Pr0.50Ca0.50CoO3 on LaAlO3

  • Padilla-Pantoja, Jessica
  • Torrelles, Xavier
  • Gázquez, Jaume
  • Rubio-Zuazo, J.
  • Blasco, Javier
  • Herrero Martín, Javier
  • García Muñoz, Josep Lluís
The Pr-based cobaltate Pr0.5Ca0.5CoO3 (PCCO) presents in bulk form a singular simultaneous valence and spin-state transition that turns the metallic state into insulator, and displays a large and ultrafast photoresponse in the insulating phase. Epitaxial thin films of PCCO have been grown by deposition on LaAlO3(001) (LAO) substrate, chosen to minimize the mismatch with the film. The films grow epitaxially with two times the substrate periodicity (2a0×2a0×2a0) and the long perovskite axis perpendicular to the surface. We report a reduction of the structural symmetry from Pnma (bulk) to P212121 (film). The P212121 symmetry revealed by synchrotron x ray remains at low temperatures. These PCCO films are metallic, and ferromagnetic below TC=170K, confirming the stabilization of excited Co3+ spin states and the suppression of the concurrent Co spin-state, valence, and metal-insulator transitions. Z-contrast imaging and electron-energy-loss spectroscopy elemental maps reveal long-range ordered oxygen vacancy planes unexpectedly stacking parallel to the interface, in spite of the tensile character of the PCCO/LAO heterostructure. In contrast to the general tendency reported for strained La0.5Sr0.5CoO3−δ (LSCO) films, we show that a nominal tensile strain can be also compatible with the presence of alternating O vacancy planes parallel to the interface, instead of perpendicular to it. That occurs thanks to the double cell of the film and the formation of the (1/2, 1/2, 1/2) superstructure studied in this work. These results expand the possibilities of controlling interfacial physical properties via engineering of ordered oxygen-defect structures in strongly correlated oxides., We acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), through Projects No. MAT2015-686760-02-2-P, No. RTI2018-098537-B-C21, and No. RTI2018-098537-BC22, and “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496). The former are cofunded by ERDF of European Union, as Project No. EFA194/16 TNSI (POCTEFA/UE-FEDER). We thank also the Spanish MICINN and the Consejo Superior de Investigaciones Científicas for financial support and for provision of synchrotron radiation facilities (Grant No. CRG-BM25B, ESRF). J.G. acknowledges the Ramon y Cajal program (Grant No. RYC-2012-11709). Research at ORNL (STEM-EELS) was supported by the US Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division (SJP and MV)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water-Induced Reversal of the TiO2(011)-(2 × 1) Surface Reconstruction: Observed with in Situ Surface X‑ray Diffraction

  • Hussain, Hadeel
  • Ahmed, Mahmoud H. M.
  • Torrelles, Xavier
  • Grinter, David C.
  • Cabailh, Gregory
  • Bikondoa, Oier
  • Nicklin, C.
  • Aschauer, Ulrich
  • Robert Lindsay, Robert
  • Thornton, Geoff
The (011) termination of rutile TiO2 is reported to be particularly effective for photocatalysis. Here, the structure of the interface formed between this substrate and water is revealed using surface X-ray diffraction. While the TiO2(011) surface exhibits a (2 × 1) reconstruction in ultra-high vacuum (UHV), this is lifted in the presence of a multilayer of water at room temperature. This change is driven by the formation of Ti–OH at the interface, which has a bond distance of 1.93 ± 0.02 Å. The experimental solution is in good agreement with density functional theory and first-principles molecular dynamics calculations. These results point to the important differences that can arise between the structure of oxide surfaces in UHV and technical environments and will ultimately lead to an atomistic understanding of the photocatalytic process of water splitting on TiO2 surfaces., Peer reviewed