Skip to main content

NUEVOS MATERIALES PARA PERMEACION EN FASE GASEOSA

MAT2016-76413-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermally rearranged polybenzoxazoles made from poly(orthohydroxyamide)s. Characterization and evaluation as gas separation membranes

  • Díez, Blanca
  • Cuadrado, Purificación
  • Marcos-Fernández, Ángel
  • González de la Campa, José
  • Tena, Alberto
  • Prádanos, Pedro
  • Palacio, Laura
  • Moo Lee, Young
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Hernández, Antonio
Two series of aromatic poly(ortho-hydroxyamide)s (poly(o-hydroxyamide)s, HPAs) were prepared by reaction of two diamines, 2,2-bis(3-amino-4-hydroxyphenyl) propane (APA) and 2,2-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (APAF), with four aromatic diacid chlorides; terephthaloyl dichloride (TPC), isophthaloyl dichloride (IPC), 2,2-bis[4-chlorocarbonylphenyl)hexafluoropropane (6FC) and 4,4¿-sulfonyldibenzoyl dichloride (DBSC). Amorphous HPAs with high molecular weights (inherent viscosities higher than 0.5 dL/g) and relatively high glass transition temperatures (220¿280 °C) were obtained. Dense membranes of HPAs were able to undergo a thermal rearrangement (TR) process to polybenzoxazoles (ß-TR-PBOs) heating at moderate temperatures (between 250 and 375 °C), and their complete conversion was reached at a temperature below 375 °C, depending on the o-hydroxy diamine moiety, APA and APAF. The ß-TR-PBOs films derived from APAF showed a higher thermal stability and higher Tg than those from APA. Gas separation properties of TR-PBOs membranes were superior to those of their poly(o-hydroxyamide) precursors, particularly for the following gas pairs: O2/N2, CO2/CH4, He/CH4 and He/CO2., The financial support provided, by the Spain's MINECO (MAT2013- 45071-R and MAT2016-76413-C2-1-R and MAT2016-76413-C2-2-R AEI/FEDER, UE and CTQ 2012-31076) is greatly acknowledged. This research was also supported by the Korea Carbon Capture & Sequestration R&D Center (KCRC) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT, and Future Planning (NRF-2014M1A8A1049305). We are also indebted to the Spanish Junta de Castilla y León for its funding help (project VA248U13). Authors kindly acknowledge Sara Rodriguez for carrying out the gas separation tests and Judit González Jarillo for performing polymer characterization, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Aromatic polyimides and copolyimides containing bulky t-butyltriphenylmethane units

  • Castro-Blanco, R. A.
  • Rojas-Rodríguez, M.
  • Hernández, Antonio
  • Lozano López, Ángel Emilio
  • Alexandrova, L.
  • Aguilar-Lugo, Carla
Triphenylmethane-based polyimides and copolyimides containing bulky t-butyl group (tBu) were obtained by one-step high temperature polycondensation of 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride with diamines of triphenylmethane (TPM) family. The polymers were obtained in quantitative yields with inherent viscosities of 0.45–0.80 dL/g. They exhibited high thermal stability with 5% weight loss above 500 °C and were cast in films with good mechanical properties capable of testing as gas separation membranes. All polyimides were readily soluble in polar aprotic solvents, and the solubility enhanced with the increase in tBu-group content. The amorphous, free-standing membranes were prepared from these polymers, and their permeabilities and selectivities to several gases were measured and discussed with respect to the structural differences in the polymers. It was shown that the presence of bulky tBu-units made the chain packing less efficient; free volume and d-spacing in the polyimides grew accordingly. As a consequence, the membranes with higher content of tBu-groups demonstrated improved permeabilities, showing 1.5–3.0 times higher permeability coefficients depending on the gas tested. The membranes’ separation performance was improved for CO/CH gas pair in comparison with that of structurally similar polyimides, while it did not change for O/N pair. Additionally, the mechanism of formation of triphenylmethane diamines in the reaction between aniline and benzaldehydes was investigated in order to optimize the monomer synthesis and to minimize possible side reactions. It was established that the secondary diamines, so-called aminals, were inevitable side products, particularly important in the condensation between aniline and tBu-benzaldehyde., This work was supported by grants from DGAPA # IN107117 and by Spain’s MINECO (Projects MAT2016-76413-C2-R2, and MAT2016-76413-C2-R1). The authors thank G. Cedillo Valverde, M.A. Canseco Martinez, E. Hernandez Mecinas, E. R-Morales and A. Tejeda Cruz (all from IIM-UNAM) for different kinds of analyses and also would like to acknowledge Sara Rodriguez for the gas separation measurements. R.A.C.B. is grateful to CONACyT for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas separation properties of aromatic polyimides with bulky groups. Comparison of experimental and simulated results

  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Juan-y-Seva, Marta
  • Campa, José G. de la
A series of new diamine monomers, with systematic variations in their chemical structure, by introducing various substituents onto the polymer backbone, have been made to react with two commercial dianhydrides: a very rigid one, pyromellitic dianhydride, (PMDA) and a more flexible one, 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA), to obtain a series of polyimide membranes with high fractional free volume (FFV), and their gas separation properties have been studied. In order to gain insight into the relationship between structure and gas separation properties of the polymers, a computer simulation of the polymers has been carried out, by a combination of molecular mechanics and molecular dynamics, to study the effect of the polymeric structure on the permeability and selectivity of the membranes. Moreover, the effect of the probe size on the accessible free volume, which cannot be experimentally determined, has been simulated and related with experimental gas separation parameters as permeability and selectivity. The use of FFV (that corresponds to a probe of zero-radius) cannot predict the behavior of several polymers, which have similar FFV values but different values of permeability and selectivity. However, simulation has permitted to correlate accurately permeability and selectivity with the accessible free volume to probes of different radii., This research was financially supported by the Agencia Estatal de Investigacion of Spain (AEI). Project MAT2016-76413-C2-R2 (AEI/ FEDER, UE
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of co2/ch4 permselectivity via thermal rearrangement of mixed matrix membranes made from an o-hydroxy polyamide with an optimal load of a porous polymer network

  • Soto, Cenit
  • Aguilar-Lugo, Carla
  • Rodríguez, S.
  • Palacio, Laura
  • Lozano López, Ángel Emilio
  • Prádanos, Pedro
  • Hernández, Antonio
Mixed matrix membranes, MMMs, consisting of variable loads of a porous polymer network, PPN, within an o-hydroxipolyamide, HPA (6FCl-APAF, made from the reaction between 2,2-bis[4-chlorocarbonylphenyl)hexafluoropropane, 6FCl, and 2,2- bis(3-amino-4-hydroxyphenyl)hexafluoropropane, APAF), have been thermally treated to induce the rearrangement of HPA to a polybenzoxazole ($\beta$-TR-PBO). HPA is 6FCl- APAF was loaded with a PPN synthetized, by us, by combining triptycene (TRP) and trifluoroacetophenone (TFAP). Mechanical, thermal and morphological properties of the membranes have been determined. CO2/CH4 selectivity of MMMs decreased slightly both when the PPN load was augmented and when thermal rearrangement took place. The changes in selectivity can be attributed mostly to solubility effects for $\beta$-TR-MMMs and to diffusive effects for the MMM from neat HPA. CO2 and CH4 permeabilities increased to the 2008 Robeson ¿s upper bond for an optimal 30 {\%} PPN load both before and after thermal rearrangement. These relatively good permselectivities are explained in terms of compaction, rigidity, fractional free volumes and filling-matrix interactions, This work was supported by the Spanish Government (AEI) throughprojects MAT2016-76413-C2-1-R and MAT2016-76413-C2-2-R and bythe Regional Government of Castilla y León and the EU-FEDER program(CLU2017-09, UIC082, VA088G19 and PhD grant of Cenit Soto). We aregrateful to Salvador Azpeleta (LTI, University of Valladolid) for per-forming the WAXS measurements