Skip to main content

NUEVAS NANOESTRUCTURAS BASADAS EN SB PARA APLICACIONES FOTOVOLTAICAS DE ALTA EFICIENCIA

MAT2016-77491-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Quantitative analysis of the interplay between InAs quantum dots and wetting layer during the GaAs capping process

  • González Robledo, David
  • Braza Blanco, María Verónica
  • Utrilla, A. D.
  • Gonzalo, A.
  • Fernández de los Reyes, Daniel
  • Ben Fernández, Teresa
  • Guzman, A.
  • Hierro, A.
  • Ulloa, J. M.
A procedure to quantitatively analyse the relationship between the wetting layer (WL) and the quantum dots (QDs) as a whole in a statistical way is proposed. As we will show in the manuscript, it allows determining, not only the proportion of deposited InAs held in the WL, but also the average In content inside the QDs. First, the amount of InAs deposited is measured for calibration in three different WL structures without QDs by two methodologies: strain mappings in high-resolution transmission electron microscopy images and compositional mappings with ChemiSTEM x-ray energy spectrometry. The area under the average profiles obtained by both methodologies emerges as the best parameter to quantify the amount of InAs in the WL, in agreement with high-resolution x-ray diffraction results. Second, the effect of three different GaAs capping layer (CL) growth rates on the decomposition of the QDs is evaluated. The CL growth rate has a strong influence on the QD volume as well as the WL characteristics. Slower CL growth rates produce an In enrichment of the WL if compared to faster ones, together with a diminution of the QD height. In addition, assuming that the QD density does not change with the different CL growth rates, an estimation of the average In content inside the QDs is given. The high Ga/In intermixing during the decomposition of buried QDs does not only trigger a reduction of the QD height, but above all, a higher impoverishment of the In content inside the QDs, therefore modifying the two most important parameters that determine the optical properties of these structures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topology Driven g-Factor Tuning in Type-II Quantum Dots

  • Llorens Montolio, José Manuel
  • Lopes-Oliveira, V.
  • López-Richard, V.
  • Cardozo de Oliveira, E. R.
  • Wewior, Lukasz Jakub
  • Ulloa, José M.
  • Teodoro, M. D.
  • Marques, G. E.
  • García-Cristobal, Alberto
  • Quiang-Hai, G.
  • Alén, Benito
We investigate how the voltage control of the exciton lateral dipole moment induces a transition from singly to doubly connected topology in type-II InAs/GaAsxSb1−x quantum dots. The latter causes visible Aharonov-Bohm oscillations and a change of the exciton g factor, which are modulated by the applied bias. The results are explained in the frame of realistic →k⋅→p and effective Hamiltonian models and could open a venue for new spin quantum memories beyond the InAs/GaAs realm., The authors gratefully acknowledge financial support from EURAMET through EMPIR program 17FUN06-SIQUST, from Spanish MINEICO through Grants No. TEC2015-64189-C3-2-R, No. MAT2016-77491-C2-1-R, No. EUIN2017-88844, and No. RYC-2017-21995, from Comunidad de Madrid through Grant No. P2018/EMT-4308, and from CSIC through Grants No. I-COOP-2017-COOPB20320 and No. PTI-001. Support from Brazilian agencies is also acknowledged through FAPESP Grant No. 2014/02112-3 and CNPq Grant No. 306414/2015-5., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain-balanced type-II superlattices for efficient multi-junction solar cells

  • Gonzalo Martín, Alicia
  • Utrilla, Antonio D.
  • Reyes, Daniel F.
  • Braza, Verónica
  • Llorens Montolio, José Manuel
  • Fuertes Marrón, D.
  • Alén, Benito
  • Ben, Teresa
  • González, David
  • Guzmán, Álvaro
  • Hierro, Adrián
  • Ulloa, José M.
Multi-junction solar cells made by assembling semiconductor materials with different bandgap energies have hold the record conversion efficiencies for many years and are currently approaching 50%. Theoretical efficiency limits make use of optimum designs with the right lattice constant-bandgap energy combination, which requires a 1.0–1.15 eV material lattice-matched to GaAs/Ge. Nevertheless, the lack of suitable semiconductor materials is hindering the achievement of the predicted efficiencies, since the only candidates were up to now complex quaternary and quinary alloys with inherent epitaxial growth problems that degrade carrier dynamics. Here we show how the use of strain-balanced GaAsSb/GaAsN superlattices might solve this problem. We demonstrate that the spatial separation of Sb and N atoms avoids the ubiquitous growth problems and improves crystal quality. Moreover, these new structures allow for additional control of the effective bandgap through the period thickness and provide a type-II band alignment with long carrier lifetimes. All this leads to a strong enhancement of the external quantum efficiency under photovoltaic conditions with respect to bulk layers of equivalent thickness. Our results show that GaAsSb/GaAsN superlattices with short periods are the ideal (pseudo)material to be integrated in new GaAs/Ge-based multi-junction solar cells that could approach the theoretical efficiency limit., We acknowledge funding from the Spanish MINECO through projects MAT2013-47102-C2-2-R and MAT2016-77491-C2-1-R, TEC2015-64189-C3-2-R and Grant AIC-B_2011-0806, and from CSIC through project 2015-50-I021. DFM acknowledges financial support of Comunidad de Madrid (S2013/MAE-2780)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Type-II GaAsSb/GaAsN superlattice solar cells

  • Gonzalo Martín, Alicia
  • Utrilla, Antonio D.
  • Aeberhard, Urs
  • Llorens Montolio, José Manuel
  • Alén, Benito
  • Fuertes Marrón, D.
  • Guzmán, Álvaro
  • Hierro, Adrián
  • Ulloa, José M.
Trabajo presentado en el SPIE Octo: Physics, Simulation, and Photonic Engineering of Photovoltaic Devices VII, celebrado en San Francisco (California, Estado Unidos), del 27 de enero al 1 de febrero de 2018, Dilute nitride GaAsSbN is an ideal candidate to form the 1-1.15 eV lattice-matched sub-cell that would significantly enhance the performance of 3- and 4-junction solar cells. However, growth problems inherent to this quaternary alloy lead typically to a poor crystal quality that limits its applicability. Better compositional control and crystal quality have been recently reported by growing the material as a GaAsSb/GaAsN superlattice, because of the spatial separation of Sb and N that avoid miscibility problems. Moreover, these structures provide bandgap tunability trough period thickness. Here we study the performance of lattice-matched 1.15 eV GaAsSb/GaAsN type-II superlattice p-i-n junction solar cells with different period thickness and compare them with the bulk and GaAsSbN/GaAs type-I superlattice counterparts. We demonstrate carrier lifetime tunability through the period thickness in the type-II structures. However, the long carrier lifetimes achievable with periods thicker than 12 nm are incompatible with a high carrier extraction efficiency under short-circuit conditions. Only superlattices with thinner periods and short carrier lifetimes show good solar cell performance. Quantum kinetic calculations based on the non-equilibrium Green’s function (NEGF) formalism predict a change in transport regime from direct tunneling extraction to sequential tunneling with sizable thermionic emission components when passing from 6 nm to 12 nm period length, which for low carrier lifetime results in a decrease of extraction efficiency by more than 30%., J. M. Ulloa acknowledges funding from the Spanish MINECO through project MAT2016-77491-C2-1-R and D. Fuertes Marrón from Comunidad de Madrid (S2013/MAE-2780). U. Aeberhard, D. Fuertes Marrón and J.M. Ulloa acknowledge EU COST Action MP1406 “Multiscale in modelling and validation for solarphotovoltaics (MultiscaleSolar)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diluted nitride type-II superlattices: Overcoming the difficulties of bulk GaAsSbN in solar cells

  • Gonzalo Martín, Alicia
  • Utrilla, Antonio D.
  • Aeberhard, Urs
  • Braza, Verónica
  • Reyes, Daniel F.
  • Fuertes Marrón, D.
  • Llorens Montolio, José Manuel
  • Alén, Benito
  • Ben, Teresa
  • González, David
  • Guzmán, Álvaro
  • Hierro, Adrián
  • Ulloa, José M.
We demonstrate type-II GaAsSb/GaAsN superlattices (SL) as a suitable structure to form the lattice-matched 1.0–1.15 eV subcell that would allow the implementation of the optimum monolithic multi-junction solar cell design. The separation of Sb and N atoms during growth leads to an improved composition homogeneity and a lower defect density than in the bulk GaAsSbN counterparts. The type-II band alignment SLs provide long radiative lifetimes that facilitate carrier collection as compared to equivalent type-I SLs. Moreover, the radiative lifetime can be controllably tuned through the period thickness, which is not possible in type-I SLs. A reduced period thickness results in enhanced absorption due to increased wavefunction overlap, as well as in a change in the transport regime from diffusive to quasiballistic, providing improved carrier extraction efficiency. As a result, the short period SL single-junction solar cells show an enhanced power conversion efficiency of 134% over the equivalent bulk devices., We acknowledge funding from the Spanish MINECO through project MAT2016-77491-C2-1-R and from CSIC through project EUIN2017- 88844 and RYC-2017-21995. DFM acknowledges financial support of Comunidad de Madrid (P2018/EMT- 4308). We also acknowledge support from EU COST Action MP1406. We would like to thank Dr. Manuel Abuín (ISOM-UPM) for micro-bonding of some of the devices and Prof. Carlos del Canizo ~ for help with AM1.5G measurements.