Skip to main content

LA TECNICA DE FRICCION-AGITACION COMO HERRAMIENTA PARA SOLDAR ALEACIONES DE ALUMINIO Y MATERIALES COMPUESTOS DE INTERES INDUSTRIAL

MAT2017-83825-C4-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of the Combined Strengthening Effect of Solute Atoms and Precipitates on Creep of Aluminum Alloys

  • Fernández, Ricardo
  • Bokuchava, Gizo
  • Toda Caraballo, Isaac
  • Bruno, Giovanni
  • Turchenko, Vitalii
  • Gorshkova, Yulia
  • González-Doncel, Gaspar
The creep strengthening mechanisms in (age-hardenable) aluminum alloys are analyzed on the basis of a new microstructural study of powder samples, an analysis of a comprehensive revision of creep data from the literature, and a new modeling approach. A strategy based on the strength difference (SD) method to separate the contributions of solid solution atoms and precipitates to creep strengthening is proposed. The new methodology considers the combination of the two contributions avoiding the need of a threshold stress term in the creep equation. The contribution of both precipitates and solid solution is taken into account by means of the analysis of the lattice parameter variation with aging time. For this study, powders of two commercial AA2xxx alloys have been analyzed using diffraction methods. The experimental results are modeled using Lubarda¿s approach combined with the SD method., Ministerio de Economía, Industria y Competitividad, Gobierno de España (ES). Grant Number: MAT2017-83825-C4-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fractal analysis of strain induced microstructures in metals

  • Fernández, Ricardo
  • Garcés, Gerardo
  • González-Doncel, Gaspar
Fractal Analysis; Dr. Robert Koprowski, The deformation of materials is a key topic for different industrial sectors. The correlation between specific thermomechanical processes, like extrusion, rolling or additive manufacturing, and the resultant material’s microstructure, is particularly interesting. In these thermomechanical processes, the microstructure of the materials depends mainly on the applied stress, the magnitude of strain achieved in a given time period, and the temperature. In the case of metals and alloys, plastic deformation can be described microscopically based on the dynamics of a huge population of moving dislocations. Plasticity is characterized at the mesoscale by the avalanche-like collective behavior of dislocations, which is a typical case of self-organized systems. Dislocations are organized into cells named grains or subgrains that greatly influence the mechanical behavior of metals and alloys. The existence of these fractal structures of dislocations in metals is well established. However, it is very complex to conduct a fractal analysis of these microstructures. This is actually done by looking for a compromise between a detailed description of the complex fractal microstructure and the development of a practical procedure that avoids unaffordable extensive characterization in a different time and spatial scales. Several cases will be described considering different alloys and experimental conditions., This study was financially supported by Proyects MAT2017-83825-C4-1-R from MINECO and Y2018/NMT-4668 from CAM, Spain. The authors would like to thank Antonio Tomás, Dr. Judit Caballero, and Prof. Paloma Adeva from Electron Microscopy Lab of CENIM for their support and help with the microstructure characterization and Edurne Laurín for her help in TEM sample preparation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructure and Mechanical Properties of Friction Stir Welded AA6061/AA6061 + 40 vol% SiC Plates

  • Señorís-Puentes, Sara
  • Fernández, Ricardo
  • González-Doncel, Gaspar
  • Hattel, Jesper Henri
  • Mishin, Oleg V.
The feasibility of butt friction stir welding (FSW) of a metal matrix composite (MMC) with a very high SiC particle content to a monolithic aluminum alloy is tested in this work. It is demonstrated for the first time that sound FSW joints can be obtained between an AA6061 aluminum plate and a thick MMC plate consisting of AA6061 reinforced with 40 vol% SiC particles. The joints withstand tensile testing, with ductile failure taking place in a soft region of the heat-affected zone on the alloy side. Metallographic examination of the MMC side after FSW reveals curved bands, where both the frequency of SiC particles and hardness are significantly lower than those in any other region on the MMC side. It is suggested that these bands are produced by transporting the alloy material to the MMC side, where the alloy is mechanically mixed with the MMC., This research was funded by MINECO, Spain, under contract MAT2017-83825-C4-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Residual Stress Distribution after Quenching Treatment Obtained from Diffraction Experiments and Simulation by Finite Element Method

  • Carro-Sevillano, Gabriel
  • Fernández, Ricardo
  • Bokuchava, Gizo
  • Millán García, Laura
  • González-Doncel, Gaspar
Abstract: A model found by finite element method was developed in COMSOL Multiphysics to describe the evolution of residual stress after quenching of cylindrical samples of aluminium alloys AA2014 and AA5083. The treatment consisted of annealing followed by quenching in fresh water. The thermal and mechanical properties of both alloys at the annealing and room temperatures were taken into account. A different sample size was considered for each alloy. The simulations show that the residual stress strongly depends on the yield stress and sample size. The results obtained by the finite element method were compared with the experimental residual stress profiles calculated from neutron and X-ray diffraction data., This work was supported by the Madrid’s Community (project Y2018/NMT-4668 Micro-Stress-MAP-CM) and the Ministry of Science and Innovation of Spain (project MAT2017-83825-C4-1-R). Neutron and synchrotron diffraction data were obtained in collaboration with the Frank Laboratory of Neutron Physics (Dubna, Russia) and the BESSY II synchrotron at the Helmholtz Zentrum. COMSOL software was provided by the Spanish National Research Council, C.S.I.C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of Microscopic Residual Stresses in an Extruded Aluminium Alloy Sample after Thermal Treatment

  • Millán García, Laura
  • Bokuchava, Gizo
  • Hidalgo, J.I.
  • Fernández, Ricardo
  • Kronberger, Gabriel
  • Halodova, Patrice
  • Sáez, A.
  • Papushkin, I.
  • Garnica, Oscar
  • Lanchares, Juan
  • González-Doncel, Gaspar
Abstract: A method is proposed to calculate the microscopic residual stresses in extruded cylindrical samples of non-ageing aluminium alloy 5083 (Al–Mg), arising from quenching in fresh water from 530°C. We start from the premise that the alloy is single-phase and non-isotropic on a microscopic scale; it consists of many grains that exhibit different mechanical response depending on their crystallographic orientation and neighboring grains. Microscopic residual stresses depend on the applied heat treatment, microstructure and mechanical strength of the individual grains. The stresses were calculated from neutron diffraction data. Genetic programming algorithms were used to calculate microscopic residual stresses, considering that each diffraction peak describes the stress distribution of a group of grains having a certain orientation, size and environment. The algorithm assigns a stress value to each grain according to the distribution of the diffraction peaks and the microstructural parameters of these grains., This work was supported by the Madrid Regional Government-FEDER grant Y2018/NMT-4668 (Micro-Stress-MAP-CM) and the project MAT2017-83825-C4-1-R. We would also like to express our gratitude to FLNR-JINP for the beam time allocated on the FSD instrument, and to the HeuristicLab Software developers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction

  • Serrano-Muñoz, Itziar
  • Fernández, Ricardo
  • Saliwan-Neumann, R.
  • González-Doncel, Gaspar
  • Bruno, Giovanni
In the present work, electron backscatter diffraction was used to determine the microscopic dislocation structures generated during creep (with tests interrupted at the steady state) in pure 99.8% aluminium. This material was investigated at two different stress levels, corresponding to the power-law and power-law breakdown regimes. The results show that the formation of subgrain cellular structures occurs independently of the crystallographic orientation. However, the density of these cellular structures strongly depends on the grain crystallographic orientation with respect to the tensile axis direction, with 111 grains exhibiting the highest densities at both stress levels. It is proposed that this behaviour is due to the influence of intergranular stresses, which is different in 111 and 001 grains., This project was partially financed by the Spanish MINECO program, corresponding to Project MAT2017-83825-C4-1-R, and by the project Y2018/NMT-4668 Micro-Stress-MAP-C from Comunidad Autónoma de Madrid, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Texture and microstructural changes after thermal cycling of 6061Al-20vol%SiCw metal matrix composite: The role of microscopic internal stresses

  • Eddahbi, Mohamed
  • Fernández, Ricardo
  • Llorente, Irene
  • González-Doncel, Gaspar
The dramatic texture and microstructural changes observed in 6061Al-20vol%SiC metal matrix composite undergoing severe thermal cycles, under the absence and the simultaneous action of an external tensile stress, are studied. Under only thermal cycles (100–450 °C) homogenization and disorientation of the SiC whisker reinforcement and crystallographic texture randomization occurs. However, when a simultaneous tensile stress is applied, the whiskers rotate so that their long direction aligns with the tensile axes. Furthermore, a strong texture and large deformations (superplasticity), higher than 1000%, are achieved. These results are explained on the basis of the microscopic stress fields generated at the different microstructural scales (stresses of type II and type III) and well-known observation of dislocation generation at the SiC-metal interface during the cooling period of the cycles. We propose that moving dislocations (responsible of type III stresses) operate differently under the absence or the presence of the external stress. Under no stress, dislocation motion (occurring mainly during the heating period) is driven only by the type II internal stress. However, dislocation motion is improved when an external stress is applied, leading to texture changes and large elongations. Despite that a low external stress is applied, it overcomes the effect of the internal stresses for dislocation motion., Projects Micro-Stress-MAP Y2018/NMT-4668 from Comunidad Autónoma de Madrid, and MAT2017-83825-C4-1-R and TECNOFUSIÓN(III)-CM S2018/EMT-4437, from MINECO, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for the paper: Fernández, Ricardo; Papanikolaou, Stefanos; Bruno, Giovanni; González-Doncel, Gaspar; Alava, Mikko. 2023. Creep in polycrystalline metals as a phase transition: experiments and a minimal random-field Ising model

  • Fernández, Ricardo
  • Papanikolaou, Stefanos
  • Bruno, Giovanni
  • González-Doncel, Gaspar
  • Alava, Mikko
Experimental tests have been carried out by applying a constant stress to the materials under study (Al-99.8% as well as AA6061alloy) and increasing the temperature from room temperature to 800K. The heating rate used was 2K/min. We implemented the three-dimensional random-field Ising model, both as function of stress and as a function of temperature for cubic supercells of 16×16×16 sites. We also investigated the behavior of the secondary creep strain rate ε ˙_SS as a function of temperature at different disorder strength ∆ = 0, 0.5, 1, 1.5, 2, i.e. different applied stress., This work was funded by Ministerio de Asuntos Económicos y Transformación Digital (TED2021-129580B-100 (ECOAUTO) and MAT2017-83825-C4-1-R ()., ThermalZeroField_T-M-DataSet_RFvariance_000000_1.ascii ThermalZeroField_T-M-DataSet_RFvariance_000000_5.ascii ThermalZeroField_T-M-DataSet_RFvariance_000001_0.ascii ThermalZeroField_T-M-DataSet_RFvariance_000001_5.ascii ThermalZeroField_T-M-DataSet_RFvariance_000002_0.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_1.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_5.ascii AthermalField_sigma-M-DataSet_RFvariance_000001_0.ascii AthermalField_sigma-M-DataSet_RFvariance_000001_5.ascii AthermalField_sigma-M-DataSet_RFvariance_000000_1.ascii strain_rate-vs-temp-pureAl-11MPa.ascii strain_rate-vs-temp-pureAl-17MPa.ascii strain_rate-vs-temp-pureAl-32MPa.ascii strain_rate-vs-temp-AA6061-17MPa.ascii strain_rate-vs-temp-AA6061-32MPa.ascii strain_rate-vs-temp-AA6061-38MPa.ascii strain_rate-vs-temp-AA6061-45MPa.ascii, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dislocation structures after creep in an Al-3.85 %Mg alloy studied using EBSD-KAM technique

  • Serrano-Muñoz, Itziar
  • Fernández, Ricardo
  • Saliwan-Neumann, R.
  • González-Doncel, Gaspar
  • Bruno, Giovanni
The electron backscatter diffraction (EBSD) technique is used to investigate the dislocation structures formed after steady-state creep deformation of an Al-3.85%Mg alloy. This material is crept at two different stress levels, corresponding to the so-called power-law and power-law breakdown regimes. The results show that, regardless of the creep stress level, the strain tends to localize, leading to the formation of intragranular bands. The thickness of such bands is larger when the material is tested at loads corresponding to the power-law breakdown. This suggests enhanced diffusion by dislocation pipes., Spanish MINECO program, project MAT2017-83825-C4-1-R. Comunidad Autónoma de Madrid, Spain, project Y2018/NMT-4668, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Material Behavior around the FSW/FSP Tool Described by Molecular Dynamics

  • Medina, Bentejui
  • Fernández, Ricardo
Friction stir welding and processing (FSW/FSP) involves severe plastic deformation of metals or polymers at high temperature around a rotating tool. The material¿s flow is usually modelled by FEM using a complex combination of thermomechanical and friction models. However, the description of the behavior of the first atomic layers in contact with the tool cannot be undertaken by continuum mechanics modelling such as FEM. Among the available simulation techniques, molecular dynamics (MD) where friction and heat are generated by material layers¿ relative movement, allows the simulation of the behavior of the first atomic layers of the work piece in contact with the tool. In this work, in aluminum, the effect of temperature and advancing and rotating speeds on FSW/FSP material¿s flow and crystallography in the vicinity of the tool are discussed. The data analyzed demonstrate that a normalization of the weld-pitch parameter by the pin radius allows obtaining reliable heat input, momentum, and temperatures typical of this critical region in the FSW/FSP processes by MD. The results show that MD provide reliable data as an input for the FEM in a multiscale FSW/FSP modelling., This research was funded by (R.F.) MINECO, Spain, and CAM, Madrid’s Community, for the financial support of Projects MAT2017-83825-C4-1-R and Y2018/NMT-4668 Micro-Stress-MAP-CM, respectively and (B.M.) the Basque government under the project Elkartek 2020 and from Spain (the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program and the RETOS projects RTI2018-095463-B-C21 and RTI2018-095463-B-C22 Surfnanocut)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the dependence of creep-induced dislocation configurations on crystallographic orientation in pure Al and Al Mg

  • Fernández, Ricardo
  • Bokuchava, Gizo
  • Bruno, Giovanni
  • Serrano-Muñoz, Itziar
  • González-Doncel, Gaspar
The peak broadening in neutron diffraction experiments on tensile specimens of pure Al (99.8%) and an Al Mg alloy pre-deformed at different creep strains is analysed. These results are combined with the kernel angular misorientation of electron backscatter diffraction data from the creep-deformed microstructures. It is found that differently oriented grains possess different microstrains. These microstrains vary with creep strain in pure Al, but not in the Al Mg alloy. It is proposed that this behaviour can explain the power-law breakdown in pure Al and the large creep strain observed in Al Mg. The present findings further corroborate a description of the creep-induced dislocation structure as a fractal, predicated on previous work., The following funding is acknowledged: Ministerio de Economía y Competitividad, Agencia Estatal de Investigación (contract No. MAT2017-83825-C4-1-R and project No. TED2021-129580B-100); Comunidad de Madrid (contract No. Y2018/NMT-4668 Micro-Stress-MAP-CM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Prediction of microscopic residual stresses using genetic programming

  • Millán García, Laura
  • Kronberger, Gabriel
  • Fernández, Ricardo
  • Bokuchava, Gizo
  • Halodova, Patrice
  • Sáez-Maderuelo, Alberto
  • González-Doncel, Gaspar
  • Ignacio Hidalgo, J.
Metallurgical manufacturing processes commonly used in the industry (rolling, extrusion, shaping, machining, etc.) usually cause residual stress development which can remain after thermal heat treatments. These stresses can be detrimental for the in-service performance of structural components, which makes their study and understanding important. Residual stress variations are usually determined at a macroscopic scale (commonly, using diffraction methods). However, stress variations at the microscopic scale of the individual crystallites (grains), are also relevant. Contrary to the macroscopic residual stresses, microscopic residual stresses are difficult to quantify using conventional procedures. We propose to use machine learning to find equations that describe microscopic residual stresses. Concretely, we show that we are able to learn equations to reproduce the diffraction profiles from microstructural characteristics using genetic programming. We evaluate the learned equations using real neutron diffraction peaks as a reference, obtaining accurate results for the most frequent grain orientations with runtimes of a few minutes., The authors acknowledge to Consejería de Educación e Investigación, from Comunidad Autónoma de Madrid, CAM, Madrid, Spain, for the project Micro-Stress-MAP, of ref. Y2018/NMT- 4668, and also to the Spanish Ministerio de Economía Competitividad, MINECO, for the project of ref. MAT2017-R83825-C4-1-R, to which this work is linked. The FLNP of the JINR (Dubna, Russia), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Using genetic programming and the stress equilibrium method to obtain the un-stressed lattice parameter for calculating residual stresses

  • Millán-García, G.
  • Bokuchava, Gizo
  • Halodova, Patrice
  • Sáez-Maderuelo, Alberto
  • González-Doncel, Gaspar
  • Hidalgo, J.I.
  • Velasco, J.M.
  • Fernández, Ricardo
While it is known that the crucial requirement for investigating residual stresses using diffraction is the use of a reliable unstressed lattice parameter, the robustness of genetic programming to accomplish this task will be shown here. The parameter obtained from genetic programming in the context of the stress equilibrium method is compared with values resulting from other approaches of this method. This gives support and strength to the use of genetic programming to investigate microscopic residual stresses from real, experimental information. This is, so far, absent in theoretical models recently proposed. Whereas residual stress fields determination by diffraction methods at a macroscopic scale (scale of the sample size) offers no serious difficulties, the stress determination at the microscopic scale (i.e., stresses varying among neighboring grains) is still a pending task. Understanding these microscopic stresses is, however, of a great technological importance, as they may be the cause of fatigue damage and/or stress corrosion cracking in many structural components. Despite that theoretical but solid alternatives, for example those based on phase field models, are being used to unveil the stresses developed at the grain scale after known thermo-mechanical treatments, the results obtained still need to be assessed by experimental results linked to real microstructures. On the contrary, recent works propose the use of genetic programming approaches to investigate these microscopic stresses on the basis of data recorded from real stressed samples; specifically, from neutron diffraction and detailed knowledge of the microstructure and its characteristics; e.g., the texture gradient developed., The authors thank Consejería de Educación e Investigación from Comunidad Autónoma de Madrid, CAM, Madrid, Spain, for the grant of Micro-Stress-Map project, ref Y2018/NMT4668, and the Spanish Ministerio de Economía y Competitividad, MINECO, for the project of ref. MAT2017- R83825-C4–1-R, to which this work is linked. The FLNP of the JINR (Dubna, Russia) is acknowledged for the beam- time allocation for the experiments on FSD instrument. Special mention also deserves the technical body of the National Center for Metallurgical Research, CENIM, for the preparation of the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Contribution of the Fe-rich phase particles to the high temperature mechanical behaviour of an Al-Cu-Fe alloy

  • Zhao, Y.
  • He, W.
  • Medina, Judit
  • Song. D.
  • Sun, Zhenzhong
  • Xue, Y.
  • González-Doncel, Gaspar
  • Fernández, Ricardo
The high temperature strengthening mechanisms in Al-Cu-Fe aluminium alloy was analysed basis on a comprehensive microstructural study of the as-cast alloy and mechanical testing results. An approach which extracts the specific contribution of solid solution atoms, precipitates, and Fe-rich particles to the creep strengthening was utilized. Additionally, the Shear Lag model, was employed to account for the contribution to strengthening of the Fe-rich intermetallic particles through a load transfer mechanism. For this study, an as-cast Al-Cu alloy, which does not contain Fe impurities, has been also used for comparative purposes. The findings suggest that the large and 3D interconnected Fe-rich phase particles (Al(MnFe) and α-Fe) generate the main strengthening effect at high temperature through a load transfer mechanism, whereas the contribution of the nanometric AlCuMg precipitates were very limited., This work was supported by the Natural Science Foundation of China (52104373). We would also would like to thank the WL13HB beamline in the Shanghai Synchrotron Radiation Facility (SSRF), China, for provision of synchrotron radiation beamtime. The authors thanks to access TEM facility in the Spanish National Centre for Electron Microscopy (ICTS) at Complutense University of Madrid, Spain. Y. Zhao thanks China Scholarship Council for providing financial support during the visiting in CENIM-CSIC, Spain. The authors thanks D.C. Dunand at Northwest University for providing comparison experimental data in this study. Two of the authors, RF and GG-D, from CENIM, also acknowledge support from Madrid Regional Government-FEDER grant Y2018/NMT-4668 (Micro-Stress-MAP-CM) and project MAT2017–83825-C4–1-R., Peer reviewed