Skip to main content

CARACTERIZACION DE LA ESTABILIDAD ELECTROQUIMICA Y DEL TRANSPORTE DE CARGA EN LIQUIDOS IONICOS E IONOGELES HIBRIDOS

MAT2017-89239-C2-2-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Structure, dynamics and conductivities of ionic liquid-alcohol mixtures

  • Otero Mato, José Manuel
  • Montes-Campos, Hadrián
  • Gómez González, Víctor
  • Montoto, Martín
  • Cabeza Gras, Óscar
  • Kondrat, Svyatoslav
  • Varela Cabo, Luis Miguel
We study the microscopic structure and transport properties of ions in mixtures of 1-butyl-3-methylimidazolium and 1-butyl-3-ethylimidazolium iodide with ethanol using atomistic molecular dynamics simulations and conductivity measurements. Compared with the same ionic liquids in water, we reveal essential differences in ionic structure that are closely related to the differences in the solubility mechanisms of both types of solvents. In particular, unlike for aqueous solutions, we find a homogeneous distribution of solvent molecules in the system, i.e., we observe no cluster formation, which agrees with the nano-structured solvation paradigm. In addition, we calculate the conductivities of these systems in the whole concentration range and compare them with experimental data. Although the simulated values slightly underestimate the experimental ones, they reproduce the shape of the experimental conductivity dome reasonably well. We also show that the pseudo-lattice random-alloy model, which is based on microscopic ion jumping frequencies, describes the conductivity data accurately. We compute the average jumping frequencies directly from simulations and find that they agree well with those obtained by fitting the simulation conductivity data. These results show that the pseudo-lattice random-alloy model provides a valuable tool to describe the conductivities of ionic liquid–solvent mixtures and particularly their concentration dependence. It shall also apply to other systems, e.g., inorganic electrolytes and dispersed ionic conductors
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Density functional theory of alkali metals at the IL/graphene electrochemical interface

  • Montes-Campos, Hadrián
  • Rivera-Pousa, Alejandro
  • Méndez-Morales, Trinidad
The mechanism of charge transfer between metal ions and graphene in the presence of an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) is investigated by means of density functional theory calculations. For that purpose, two different comparisons are established: (i) the behavior of Li+ and K+ when adsorbed onto the basal plane of graphene and (ii) the differences between Li+ approaching the carbon surface from the basal plane and being intercalated through the edge plane of trilayer graphene. In the first case, it is found that the metal ions must overcome high energy barriers due to their interaction with the ionic liquid before reaching an equilibrium position close to the interface. In addition, no significant charge transfer between any of the metals and graphene takes place until very close energetically unfavorable distances. The second configuration shows that Li+ has no equilibrium position in the proximity of the interface but instead has an equilibrium position when it is inside the electrode for which it has to cross an energy barrier. In this case, the formation of a LiC12 complex is observed since the charge transfer at the equilibrium distance is achieved to a considerable extent. Thus, the interfacial charge transfer resistance on the electrode in energy devices based on ionic liquids clearly depends not only on the binding of the ionic liquid to the metal cations and their ability to form a dense solvation shell around them but also on the surface topography and its effect on the ion packing on the surface.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

On the physical properties of mixtures of nitrate salts and protic ionic liquids

  • Vallet Moreno, Pablo
  • Bouzón Capelo, Silvia Diana
  • Méndez Morales, Trinidad
  • Gómez González, Víctor
  • Arosa Lobato, Yago
  • Fuente Carballo, Raúl de la
  • López Lago, María Elena
  • Rodríguez González, Julio Ramón
  • Gallego del Hoyo, Luis Javier
  • Parajó Vieito, Juan José
  • Salgado Carballo, Josefa
  • Turmine, Mireille
  • Segade Zas, Luisa María
  • Cabeza Gras, Óscar
  • Varela Cabo, Luis Miguel
We report a systematic study of the effect of salt concentration and its cation valence on several equilibrium and transport properties of mixtures of the model protic ionic liquid ethylammonium nitrate with monovalent (LiNO3), divalent (Mg(NO3)2 and Ca(NO3)2), and trivalent (Al(NO3)3) salts. These properties, determined by appropriate experimental techniques, include density, sound velocity, refractive index, surface tension, conductivity and viscosity. Single-particle dynamics and radial distribution functions were also analyzed by means of molecular dynamics simulations. The temperature dependence of the conductivity was studied in the Vogel-Fulcher-Tammann framework, and we obtained effective activation energies, fragility indexes, and Vogel temperatures. In addition, we performed a high-temperature Arrhenius analysis and we calculated the activation energies of both conductivity and viscosity. Finally, the exponents of the fractional Walden rule for the different mixtures were obtained and the ionicities and fragilities of the systems were analyzed, proving that all the mixtures are subionic and fragile. The distortion of the network of hydrogen bonds characteristic of protic ionic liquids and the formation of long-lived anionic aggregates composed of the cations of the added salt and the nitrate anions in their first solvation shell were found to have a deep impact on the analyzed properties. The role of the surface charge density of the salt cations on the structure and transport properties of the solutions is detailedly analyzed and related to solvation of salt species in the polar nanoregions of the ionic liquid (nanostructured solvation)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Influence of Small Quantities of Water on the Physical Properties of Alkylammonium Nitrate Ionic Liquids

  • Ausín Neira, David
  • Parajó Vieito, Juan José
  • Trenzado, José Luis
  • Varela Cabo, Luis Miguel
  • Cabeza, Oscar
  • Segade, Luisa
This paper presents a comprehensive study of two alkylammonium nitrate ionic liquids. As part of this family of materials, mainly ethylammonium nitrate (EAN) and also propylammonium nitrate (PAN) have attracted a great deal of attention during the last decades due to their potential applications in many fields. Although there have been numerous publications focused on the measurement of their physical properties, a great dispersion can be observed in the results obtained for the same magnitude. One of the critical points to be taken into account in their physical characterization is their water content. Thus, the main objective of this work was to determine the degree of influence of the presence of small quantities of water in EAN and PAN on the measurement of density, viscosity, electrical conductivity, refractive index and surface tension. For this purpose, the first three properties were determined in samples of EAN and PAN with water contents below 30,000 ppm in a wide range of temperatures, between 5 and 95 °C, while the last two were obtained at 25 °C. As a result of this study, it has been concluded that the presence of water is critical in those physical properties that involve mass or charge transport processes, resulting in the finding that the absolute value of the average percentage change in both viscosity and electrical conductivity is above 40%. Meanwhile, refractive index (≤0.3%), density (≤0.5%) and surface tension (≤2%) present much less significant changes
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Structure, dynamics and ionic conductivities of ternary ionic liquid/lithium salt/DMSO mixtures

  • Martínez Crespo, Pablo
  • Otero Lema, Martín
  • Cabeza Gras, Óscar
  • Montes-Campos, Hadrián
  • Varela Cabo, Luis Miguel
In this paper we report classical Molecular Dynamics and ab initio Density Functional Theory simulations of the structure and single particle dynamics of ternary mixtures of a protic (ethylammonium nitrate, EAN) and an aprotic (1-Ethyl-3-methylimidazolium tetrafluoroborate, EMIMBF4) ionic liquid, lithium salts with common anion and a molecular cosolvent, dimethyl sulfoxide (DMSO). The coordination numbers and electrical conductivities of the different mixtures have been calculated throughout the whole concentration range, and the differences between mixtures with the protic and aprotic ionic liquids were analyzed. In both cases, the evolution of the electrical conductivity is seen to correlate well with the formation of mixed tetrahedral solvation complexes of lithium cations with ionic liquid anions and cosolvent molecules. The differences in the solvation and charge transport mechanisms in hydrogen bonded mixtures and those based in the aprotic ionic liquid are analyzed. Our conclusions indicate that the major feature behind the electrical conductivity of the ternary mixtures is the composition of the solvation shell of the metal cations in the mixtures and the rate at which anions in it are replaced by DMSO molecules
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Influence of metal salts addition on physical and electrochemical properties of ethyl and propylammonium nitrate

  • Ausín, David
  • Trenzado, José L.
  • Turmine, Mireille
  • Varela, Luis M.
  • Cabeza, Oscar
  • González Romero, Elisa
  • Segade Zas, MaríaLuisa
In this work, we deepen in the characterization of two protic ionic liquids (PILs), ethylammonium nitrate (EAN) and propylammonium nitrate (PAN). With this aim, we determined the influence of inorganic nitrate salts addition on their physical properties and their electrochemical potential window (EPW). Thus, experimental measurements of electrical conductivity, density, viscosity, refractive index and surface tension of mixtures of {EAN or PAN + LiNO3, Ca(NO3)2, Mg(NO3)2 or Al(NO3)3} at a temperature range between 5 and 95 °C are presented first, except for the last two properties which were measured at 25 °C. In the second part, the corresponding EPWs were determined at 25 °C by linear sweep voltammetry using three different electrochemical cells. Effect of the salt addition was associated mainly with the metal cation characteristics, so, generally, LiNO3 showed the lower influence, followed by Ca(NO3)2, Mg(NO3)2 or Al(NO3)3. The results obtained for the EAN + LiNO3 mixtures, along with those from a previous work, allowed us to develop novel predictive equations for most of the presented physical properties as functions of the lithium salt concentration, the temperature and the water content. Electrochemical results showed that a general order of EPW can be established for both PILs, although exceptions related to measurement conditions and the properties of the mixtures were found., Fundación Segundo Gil Dávila, Agencia Estatal de Investigación | Ref. MAT2017-89239-C2-1-P, Agencia Estatal de Investigación | Ref. MAT2017-89239-C2-2-P
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Ionogels Based on Protic Ionic Liquid - Lithium Salt Mixtures

  • Parajó, Juan José
  • Vallet Moreno, Pablo
  • Villanueva López, María
  • Cabeza, Óscar
  • Fernández Carretero, Francisco José
  • García-Luis, Alberto
  • Di Pietro, Maria Enrica
  • Mele, Andrea
  • Castiglione, Franca
  • Salgado, Josefa
  • Varela, Luis M.
[Abstract] The effect of the addition of lithium nitrate on the liquid range and electrical conductivity of mixtures of a protic ionic liquid, ethylammonium nitrate (EAN) with LiNO3 is reported in this work. Moreover, changes in these properties upon confinement in silica-based matrices are also analysed and related to variations on the microstructure of the mixtures. Our results show that gelation of the mixtures induces amorphous behaviour in all the samples, but no significant changes in the thermal stability are detected. However, important differences on the electrical conductivity of the liquid and gel states of the mixtures were observed. While this magnitude decreases with the addition of salt in the liquid samples for all the temperatures it increases at low concentrations of LiNO3 up to a maximum in the gelled samples with the lowest concentration of added salt (0.1 mol of salt by kg of EAN). High resolution magic angle spinning (HRMAS) NMR shows that the addition of lithium nitrate increases the mobility (both rotational and translational motion) of the cation EA+ within the ionogel and the diffusion of the cation provides evidence of the presence of two different populations of the same molecules experiencing two distinct apparent diffusion coefficients (bi-exponential decay of magnetization in diffusion NMR experiments), while it is mono-exponential in the pure ionic liquid. The Li+ cation is shown to display a higher mobility (both rotational and translational motion) in the ionogel than in the neat ionic liquid. The frustration of the formation of solvation complexes due to the confinement is suspected to be behind this behaviour., Authors acknowledge M. Gómez (RIAIDT-USC) for the technical support in DSC measurements. This work was supported by Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P and the SISE Network RED2018-102679-T as well as by Xunta de Galicia through GRC ED431C 2020/10 project and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06. P. Vallet and J. J. Parajó thank funding support of FPI Program from Spanish Ministry of Science, Education and Universities and I2C postdoctoral Program of Xunta de Galicia, respectively, Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED431D 2017/06
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Preliminary Study of New Electrolytes Based on [MPPyr][TFSI] for Lithium Ion Batteries

  • García-Garabal, Sandra
  • Domínguez-Pérez, Montserrat
  • Portela, Dafne
  • Varela, Luis M.
  • Cabeza, Óscar
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The application of ionic liquids in lithium ion batteries has increased in recent years in order to find new electrolytes that improve both performance and safety. The gathering of experimental data in order to understand the behaviour of these systems will help us design electrolytes that can be optimized for a specific objective. Data on electrolytes made up of a ternary mixture with an ionic liquid are missing in the literature. In this work, we provide new data on physical properties and refractive indexes for the ternary mixtures 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([MPPyr][TFSI]) + acetonitrile (AN) or γ butyrolactone (GBL) or dimethyl sulfoxide (DMSO) + lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) with different concentrations of salt, specifically, 10%, 15%, 20%, 30%, 35%. The measured properties were density (ρ), viscosity (η) and ionic conductivity (κ) in the temperature range of 278.15 to 358.15 K except for the mixtures with acetonitrile whose temperature range was 278.15 K to 328.15 K and the refractive indexes (nD) that were measured at a single temperature of 298.15 K. In general, the addition of salt in the binary mixtures provokes an increase of density and viscosity and therefore a decrease of ionic conductivity. It is worth mentioning that some of the studied systems showed values of ionic conductivity even better than those obtained for electrolyte systems based on carbonate., This work was supported by Ministerio de Economia y Competitividad (MINECO) and FEDER Program through the projects MAT2017–89239-C2–1-P, MAT2017–89239-C2–2-P and D2018–102679-T; Xunta de Galicia. Funding for open access charge: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Experimental Device to Measure the Ionic Conductivity Anisotropy in Liquid Crystal Hydrogel Based In [EMIM] Alkyl Sulfate Ionic Liquids

  • Portela, Dafne
  • Segade, Luisa
  • Arosa, Yago
  • López Lago, Elena
  • Varela, Luis M.
  • Tojo, Emilia
  • Cabeza, Óscar
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] We have built an experimental device with the aim to measure the expected electrical conductivity anisotropy in a liquid crystal, obtained from the gelation of the ionic liquid 1-ethyl-3-methyl imidazolium decyl sulfate, [EMIM][DSO4]. This ionic liquid has the particularity that it transits to a semi-solid gel state at room temperature when it contains water, naturally adsorbed from the environment until a balance is reached between the concentration of water in the IL and the atmospheric humidity grade. The quantity of water adsorbed to form the hydrogel at room temperature varies from about 5 to 30 wt%, each composition giving place to different smectic phases. In the gel state, the ionic liquid ions and the water molecules self-organize into micro-sized mesophases that resemble the structures of a liquid crystal. Our device is a closed 2D sample holder (with sides 150 times longer than its thickness), with a single narrow window open to the atmosphere, and four copper contacts on the sides. The dried ionic liquid is tempered at 40 °C to increase its fluidity when injected into the cavity, and then, it can only adsorb water through the narrow opening. Thus, water adsorption is unidirectional and slow, so the transition of the IL to the gel phase happens progressively. A metastable giant mesophase appears as an orientated macrodomain in the form of a striped pattern. In this state, we measure the electrical conductivity of the confined film in directions parallel and perpendicular to the observed strips, finding a difference of up to 26% between both values of the conductivity. If the sample freezes (below 10 °C) or it liquefies (above 50 °C) the meso structure is broken and the observed anisotropy destroyed. We can return the sample to gel state by varying the temperature, but the ordered macroscopic state is no longer recovered. This research must give clues to solve the charge transport mechanism quiz in ionic liquids and semi-solid coductors., This work was supported by Ministerio de Economia y Competitividad (MINECO) and FEDER Program through the projects MAT2017–89239-C2–1-P, MAT2017–89239-C2–2-P and RED2018–102679-T; Xunta de Galicia and FEDER (GRC 508 ED431C 2020/10). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; GRC 508 ED431C 2020/10
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Strange Behaviour of Transport Properties in Novel Metal Thiocyanate Based Ionic Liquids

  • Cabeza, Óscar
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Rilo, Esther
  • Ausín, David
  • Seijas, Julio A.
  • Vázquez-Tato, M. Pilar
  • Matveev, Vladimir V.
  • Ievlev, A.V.
  • Salgado, Josefa
  • Varela, Luis M.
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, The following are the Supplementary data to this article: https://ars.els-cdn.com/content/image/1-s2.0-S0167732221018882-mmc1.docx, [Abstract] In a previous paper some of us presented the structure and some properties of a new family of ionic liquids, ILs, with a common cation, 1-butyl-3-methyl imidazolium (the popular [C4C1Im]⁺ or [BMIM]⁺) and a variety of anions based in thiocyanate (SCN)¯: one reference sample and ten with anionic metal complexes of different valences: Al¹¹¹, Mn¹¹, Fe¹¹, Cr¹¹¹, Ni¹¹, Hg¹¹, Zn¹¹, Co¹¹ and Cu¹, resulting, respectively, [BMIM](SCN), [BMIM]₃ Al(SCN)₆, [BMIM]₄ Mn(SCN)₆, [BMIM]₃ Fe(SCN)₆, [BMIM]₃ Cr(SCN)₆, [BMIM]₄ Ni(SCN)₆, [BMIM]₂ Hg(SCN)₄, [BMIM]₂ Zn(SCN)₄, [BMIM]₂ Co(SCN)₄ and [BMIM]₃ Cu(SCN)₄. In this paper we show experimental measurements of electrical conductivity of these ILs in a broad temperature range (about 90 K). Viscosity has been measured for six compounds in a wide temperature range. In addition, the diffusion coefficient for both ions forming the IL has been measured for some of the samples using NMR-Dosy technique. In spite of being very similar compounds from a chemical point of view, they present very different transport property values. Thus, viscosity varies more than two orders of magnitude among those metal thiocyanate ILs, being the highest for the compound with Al and the lowest for that with Hg. Moreover, differences between ionic conductivity and diffusion coefficient values extend more than one order of magnitude among the thiocyanate ILs. These three properties will be related in pairs, thus through Walden’s rule we compare molar conductivity and fluidity, while using Kohlrausch’s law and Nerst-Einstein equation molar conductivity and diffusion coefficient are related. Also, diffusion coefficient and fluidity (the inverse of viscosity) are compared by means of Stokes-Einstein relationship. In addition, we calculate the Laity interionic friction coefficients for both anions of the IL with Hg. Finally, a theoretical model is suggested to explain all the experimental evidences reported., We acknowledge the financial support of Ministerio de Economía y Competitividad MINECO) (MAT2017-86109-P and MAT2017-89239-C2-(1.2)-P); and Xunta de Galicia (AGRU 015/11. GRC ED431C 2016/001 and ED431D 2017/06). All these research projects were partially supported by FEDER. Also, D.A. acknowledges Gil Dávila Foundation for his postgraduate grant. Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06, https://ars.els-cdn.com/content/image/1-s2.0-S0167732221018882-mmc1.docx
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Synthesis, Microstructure and Volumetry of Novel Metal Thiocyanate Ionic Liquids With [BMIM] Cation

  • Cabeza, Óscar
  • Varela, Luis M.
  • Rilo, Esther
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Ausín, David
  • Pedro, Manuel de
  • Rodríguez Fernández, Jesús
  • González, Jesús Antonio
  • Vázquez-Tato, M. Pilar
  • Arosa, Yago
  • López Lago, Elena
  • Fuente, Raúl de la
  • Parajó, Juan José
  • Salgado, Josefa
  • Villanueva López, María
  • Matveev, Vladimir V.
  • Ievlev, A.V.
  • Seijas, Julio A.
This is an accepted version of the published document., [Abstract] We present a new family of ionic liquids (ILs) with a common cation, 1-butyl-3-methyl imidazolium, the popular [BMIM]+ (also written C4C1Im+) and a variety of anionic complexes (also called adducts) based in thiocyanate (SCN)−: one blank compound, BMIM(SCN), and ten doped with metals having different oxidation states: Al+3, Mn+2, Fe+3, Cr+3, Ni+2, Hg+2, Zn+2, Co+2, Cd+2 and Cu+, forming, respectively, [BMIM]3[Al(SCN)6], [BMIM]4 Mn(SCN)6, [BMIM]3 Fe(SCN)6, [BMIM]3 Cr(SCN)6, [BMIM]4 Ni(SCN)6, [BMIM]2 Hg(SCN)4, [BMIM]2 Zn(SCN)4, [BMIM]2 Co(SCN)4, [BMIM]2 Cd(SCN)4 and [BMIM]3 Cu(SCN)4. All of them were synthesized by us, except the blank IL and the Co thiocyanate, which are commercial. Obtained products have been characterized by NMR, and also by electrospray ionization, MS-ES, which allows the determination of the new ILs purities. Then, compounds have been analyzed using FT-IR and Raman spectroscopy. In addition, magnetic susceptibility and refractive index measurements were performed in some of the compounds studied, as well as thermal characterization using DSC and TGA. Finally, experimental measurements of density on all those ILs have been performed, and for some of the samples in a broad temperature range (about 100 K). In spite of being very similar compounds from the chemical point of view, they present quite different physical properties, including optical, thermal and magnetic ones… Also, they show different oxidation states (one with +1, six with +2 and other three with +3). We guess that this family of ILs will have interesting applications, mainly for photonic devices., We acknowledge fruitful comments with our colleague Dr. A. Macías from USC. We also acknowledge the financial support of Ministerio de Economía y Competitividad (MINECO) (MAT2014-57943-C3-(1-3)-P and MAT2017-89239-C2-(1,2)-P); Xunta de Galicia (AGRU 2015/11, GRC ED431C 2016/001 and ED431D 2017/06, ED431E 2018/08). All these last research projects were partially supported by FEDER, Xunta de Galicia; AGRU 2015/11, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Structure, Dynamics and Conductivities of Ionic Liquid-Alcohol Mixtures

  • Otero-Mato, José M.
  • Montes-Campos, Hadrián
  • Gómez-González, Víctor
  • Montoto, Martín
  • Cabeza, Óscar
  • Kondrat, Svyatoslav
  • Varela, Luis M.
[Abstract] We study the microscopic structure and transport properties of ions in mixtures of 1-butyl-3-methylimidazolium and 1-butyl-3-ethylimidazolium iodide with ethanol using atomistic molecular dynamics simulations and conductivity measurements. Compared with the same ionic liquids in water, we reveal essential differences in ionic structure that are closely related to the differences in the solubility mechanisms of both types of solvents. In particular, unlike for aqueous solutions, we find a homogeneous distribution of solvent molecules in the system, i.e., we observe no cluster formation, which agrees with the nano-structured solvation paradigm. In addition, we calculate the conductivities of these systems in the whole concentration range and compare them with experimental data. Although the simulated values slightly underestimate the experimental ones, they reproduce the shape of the experimental conductivity dome reasonably well. We also show that the pseudo-lattice random-alloy model, which is based on microscopic ion jumping frequencies, describes the conductivity data accurately. We compute the average jumping frequencies directly from simulations and find that they agree well with those obtained by fitting the simulation conductivity data. These results show that the pseudo-lattice random-alloy model provides a valuable tool to describe the conductivities of ionic liquid–solvent mixtures and particularly their concentration dependence. It shall also apply to other systems, e.g., inorganic electrolytes and dispersed ionic conductors., The financial support of the Spanish Ministry of Economy and Competitiveness (Projects MAT2017-89239-C2-1-P and MAT2017-89239- C2-2-P) is gratefully acknowledged. Moreover, this work was funded by the Xunta de Galicia (ED431D 2017/06, ED431E 2018/08, GRC ED431C 2016/001 and GRC ED431C 2020/10). All these research projects were partially supported by FEDER. The help of the technician M. C. V. from UDC for some of the measurements presented is also acknowledged. H. M-C. and J. M. O-M. thank the Spanish Ministry of Education for their FPU grant, and H. M-C. thanks the USC for his “Convocatoria de Recualificación do Sistema Universitario Español-Margarita Salas” postdoc grant under the “Plan de Recuperación Transformación” program funded by the Spanish Ministry of Universities with European Union’s NextGenerationEU funds, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431C 2020/10
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Effect of Gold Nanoparticles on Transport Properties of the Protic Ionic Liquid Propylammonium Nitrate

  • García-Garabal, Sandra
  • Domínguez-Pérez, Montserrat
  • Cabeza, Óscar
  • Arosa, Yago
  • Varela, Luis M.
  • Fernández-López, Cristina
  • Pérez-Juste, Jorge
  • Pastoriza-Santos, Isabel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.jced.1c00135, [Abstract] Here, we analyze the effect of gold-nanoparticle (AuNPs)-doping of the protic ionic liquid (IL) propyl ammonium nitrate (PAN) on some physical properties, such as density, viscosity, and ionic conductivity, in a broad temperature range. This IL was lightly doped with four different AuNPs (concentration of gold lower than 0.2 mM): Au nanospheres of about 15, 60, and 80 nm diameter and Au nanorods of about 40 nm length and 12 nm width. AuNPs were synthesized following a seed growth approach and further functionalized with O-[2-(3-mercapto propionylamino)ethyl] O′-methyl-poly(ethylene glycol) (m-PEG-SH) in order to provide stability to the IL medium. The stability of the AuNPs in PAN was characterized by UV–vis spectroscopy. The results obtained here indicate that their presence produces a strong influence on the measured transport properties of PAN, decreasing viscosity up to 25% and increasing ionic conductivity up to 10% for the smallest AuNPs. Moreover, as temperature increases, the influence of AuNPs produces a decrease in the percentage deviations for viscosity and ionic conductivity. In the case of density, the AuNP-doping produces a mainly unexpected increase only for the sample with the smallest AuNPs, that is practically constant with temperature. When we equalize the AuNP concentration for all sizes and shapes, it is observed that the smallest AuNPs give higher variations in the studied properties than the bigger ones; also, the shape of the rod has an influence on the measured results. In addition, we have applied Walden’s rule to relate the three measured magnitudes, observing that AuNP addition decreases ionicity with respect to the reference sample, which is even more when we added smaller AuNPs. Finally, we explain all data assuming cation solvation of the AuNPs, which creates a local breaking of the pseudolattice structure of the PAN. Comparison with other published data is difficult because the behavior of a nanoparticle solution strongly depends on its particular composition and no data are available, in our knowledge, of any similar mixture to those studied here., The financial support of Ministerio de Economía y Competitividad (MINECO) (MAT2016-77809-R and MAT2017-89239-C2-(1,2)-P); Xunta de Galicia (GRC ED431C 2016/001 and ED431D 2017/06) is also acknowledged. All these research projects were partially supported by FEDER, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06, https://pubs.acs.org/doi/suppl/10.1021/acs.jced.1c00135/suppl_file/je1c00135_si_001.pdf
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Influence of Metal Salts Addition on Physical and Electrochemical Properties of Ethyl and Propylammonium Nitrate

  • Ausín, David
  • Trenzado Diepa, José Luis
  • Turmine, Mireille
  • Varela, Luis M.
  • Cabeza, Óscar
  • González-Romero, Elisa
  • Segade, Luisa
[Abstract] In this work, we deepen in the characterization of two protic ionic liquids (PILs), ethylammonium nitrate (EAN) and propylammonium nitrate (PAN). With this aim, we determined the influence of inorganic nitrate salts addition on their physical properties and their electrochemical potential window (EPW). Thus, experimental measurements of electrical conductivity, density, viscosity, refractive index and surface tension of mixtures of {EAN or PAN + LiNO3, Ca(NO3)2, Mg(NO3)2 or Al(NO3)3} at a temperature range between 5 and 95 °C are presented first, except for the last two properties which were measured at 25 °C. In the second part, the corresponding EPWs were determined at 25 °C by linear sweep voltammetry using three different electrochemical cells. Effect of the salt addition was associated mainly with the metal cation characteristics, so, generally, LiNO3 showed the lower influence, followed by Ca(NO3)2, Mg(NO3)2 or Al(NO3)3. The results obtained for the EAN + LiNO3 mixtures, along with those from a previous work, allowed us to develop novel predictive equations for most of the presented physical properties as functions of the lithium salt concentration, the temperature and the water content. Electrochemical results showed that a general order of EPW can be established for both PILs, although exceptions related to measurement conditions and the properties of the mixtures were found., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness, grant numbers MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P. D. Ausín thanks the funding support of Fundación Segundo Gil Dávila
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

On the Physical Properties of Mixtures of Nitrate Salts and Protic Ionic Liquids

  • Vallet Moreno, Pablo
  • Bouzón-Capelo, Silvia
  • Méndez-Morales, Trinidad
  • Gómez-González, Víctor
  • Arosa, Yago
  • de la Fuente, Raúl
  • López Lago, Elena
  • Rodríguez, Julio R.
  • Gallego, Luis J.
  • Parajó, Juan José
  • Salgado, Josefa
  • Turmine, Mireille
  • Segade, Luisa
  • Cabeza, Óscar
  • Varela, Luis M.
[Abstract] We report a systematic study of the effect of salt concentration and its cation valence on several equilibrium and transport properties of mixtures of the model protic ionic liquid ethylammonium nitrate with monovalent (LiNO3), divalent (Mg(NO3)2 and Ca(NO3)2), and trivalent (Al(NO3)3) salts. These properties, determined by appropriate experimental techniques, include density, sound velocity, refractive index, surface tension, conductivity and viscosity. Single-particle dynamics and radial distribution functions were also analyzed by means of molecular dynamics simulations. The temperature dependence of the conductivity was studied in the Vogel-Fulcher-Tammann framework, and we obtained effective activation energies, fragility indexes, and Vogel temperatures. In addition, we performed a high-temperature Arrhenius analysis and we calculated the activation energies of both conductivity and viscosity. Finally, the exponents of the fractional Walden rule for the different mixtures were obtained and the ionicities and fragilities of the systems were analyzed, proving that all the mixtures are subionic and fragile. The distortion of the network of hydrogen bonds characteristic of protic ionic liquids and the formation of long-lived anionic aggregates composed of the cations of the added salt and the nitrate anions in their first solvation shell were found to have a deep impact on the analyzed properties. The role of the surface charge density of the salt cations on the structure and transport properties of the solutions is detailedly analyzed and related to solvation of salt species in the polar nanoregions of the ionic liquid (nanostructured solvation)., The financial support of the Spanish Ministry of Economy and Competitiveness (Projects MAT2017-89239-C2-1-P and MAT2017-89239- C2-2-P) is gratefully acknowledged. Moreover, this work was funded by the Xunta de Galicia (ED431D 2017/06, ED431E 2018/08, GRC ED431C 2016/001 and GRC ED431C 2020/10). All these research projects were partially supported by FEDER. P. V. thanks the Spanish Ministry of Science, Innovation and Universities for his FPI grant (PRE2018-084212). T.M.-M. thanks the Spanish Ministry of Science, Innovation and Universities for her Juan de la Cierva grant (IJC2018-036774-I).J. J. Parajó thanks the funding support of I2C postdoctoral program of Xunta de Galicia. Y. A. thanks the funding support from postdoctoral Program of Xunta de Galicia (ED481B-2021-027). Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED481B-2021-027
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Structure, Dynamics and Ionic Conductivities of Ternary Ionic Liquid/Lithium Salt/DMSO Mixtures

  • Martínez-Crespo, Pablo
  • Otero-Lema, Martín
  • Cabeza, Óscar
  • Montes-Campos, Hadrián
  • Varela, Luis M.
[Abstract] In this paper we report classical Molecular Dynamics and ab initio Density Functional Theory simulations of the structure and single particle dynamics of ternary mixtures of a protic (ethylammonium nitrate, EAN) and an aprotic (1-Ethyl-3-methylimidazolium tetrafluoroborate, EMIMBF4) ionic liquid, lithium salts with common anion and a molecular cosolvent, dimethyl sulfoxide (DMSO). The coordination numbers and electrical conductivities of the different mixtures have been calculated throughout the whole concentration range, and the differences between mixtures with the protic and aprotic ionic liquids were analyzed. In both cases, the evolution of the electrical conductivity is seen to correlate well with the formation of mixed tetrahedral solvation complexes of lithium cations with ionic liquid anions and cosolvent molecules. The differences in the solvation and charge transport mechanisms in hydrogen bonded mixtures and those based in the aprotic ionic liquid are analyzed. Our conclusions indicate that the major feature behind the electrical conductivity of the ternary mixtures is the composition of the solvation shell of the metal cations in the mixtures and the rate at which anions in it are replaced by DMSO molecules., The financial support of the Spanish Ministry of Economy and Competitiveness (Projects MAT2017-89239-C2-1-P, MAT2017-89239-C2-2-P) is gratefully acknowledged. Moreover, this work was funded by the Xunta de Galicia (ED431E 2018/08 and GRC 369 ED431C 2020/10). All these research projects were partially supported by FEDER. H. M-C. thanks the USC for his “Convocatoria de Recualificación del Sistema Universitario Español-Margarita Salas” postdoc grant under the “Plan de Recuperación, Transformación y Resiliencia” program funded by the Spanish Ministry of Universities with European Union’s NextGenerationEU funds, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; GRC 369 ED431C 2020/10
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Random-Alloy Model for the Conductivity of Ionic Liquid–Solvent Mixtures

  • Montes-Campos, Hadrián
  • Kondrat, Svyatoslav
  • Rilo, Esther
  • Cabeza, Óscar
  • Varela, Luis M.
This document is the Accepted Manuscript version of a Published Work that appeared in final form in The Journal of Physical Chemistry C, copyright © 2020 American Chemical Society after peer review and technical editing by the publisher., [Abstract] Charge transport in ionic systems is of paramount importance in many areas, but the existing theories provide reliable description only at low electrolyte concentrations. A promising theory is the pseudo-lattice or cell theory of fluids, which describes an ionic solution as a mixture of solvent-rich and ion-rich cells, characterized by different ion mobilities, with ion transport taking place by means of a hopping mechanism. The conventional approach considers ion hops between statistically independent cells and leads to a quadratic dependence of the conductivity on ion concentration. Herein, we derive a new equation for the concentration-dependent conductivity by adopting the random-alloy approximation, which takes into account cell–cell correlations. The derived equation describes remarkably well the conductivities of ionic liquid–solvent mixtures and inorganic electrolytes in the whole range of concentration and brings new insights into their temperature and size dependence., Financial support from the Spanish Ministry of Economy and Competitiveness is gratefully acknowledged (grant numbers MAT2017-89239-C2-1-P and MAT 2017-89239-C2-2-P). This work received funding from Xunta de Galicia (AGRUP2015/11, ED431D 2017/06, ED431E 2018/08, and GRC ED431C 2016/001) and was partially supported by FEDER. H.M.-C. thanks the Spanish Ministry of Education for the FPU grant. We thank Galician Supercomputing Centre (CESGA) for providing computational facilities. Funding from the European Union COST Actions CM1206 and MP1303 is also acknowledged. S.K. and L.M.V. acknowledge CONIN project of the European Union’s Horizon 2020 Research and Innovation Programme (Marie Skłodowska-Curie grant agreement 409734276) and personally thank Alina Ciach (IPC, Warsaw) for the invitation to the CONIN Workshop in Warsaw where this work was initiated, Xunta de Galicia; AGRUP2015/11, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; ED431C 2016/001
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Influence of Small Quantities of Water on the Physical Properties of Alkylammonium Nitrate Ionic Liquids

  • Ausín, David
  • Parajó, Juan José
  • Trenzado, José L.
  • Varela, Luis M.
  • Cabeza, Óscar
  • Segade, Luisa
[Abstract] This paper presents a comprehensive study of two alkylammonium nitrate ionic liquids. As part of this family of materials, mainly ethylammonium nitrate (EAN) and also propylammonium nitrate (PAN) have attracted a great deal of attention during the last decades due to their potential applications in many fields. Although there have been numerous publications focused on the measurement of their physical properties, a great dispersion can be observed in the results obtained for the same magnitude. One of the critical points to be taken into account in their physical characterization is their water content. Thus, the main objective of this work was to determine the degree of influence of the presence of small quantities of water in EAN and PAN on the measurement of density, viscosity, electrical conductivity, refractive index and surface tension. For this purpose, the first three properties were determined in samples of EAN and PAN with water contents below 30,000 ppm in a wide range of temperatures, between 5 and 95 °C, while the last two were obtained at 25 °C. As a result of this study, it has been concluded that the presence of water is critical in those physical properties that involve mass or charge transport processes, resulting in the finding that the absolute value of the average percentage change in both viscosity and electrical conductivity is above 40%. Meanwhile, refractive index (≤0.3%), density (≤0.5%) and surface tension (≤2%) present much less significant changes., This research was funded by the Spanish MINISTRY OF ECONOMY AND COMPETITIVENESS, grant numbers MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P. D. Ausín thanks the funding support of Fundación Segundo Gil Dávila. J.J. Parajó thanks the funding support of I2C postdoctoral program of Xunta de Galicia
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Liquid Range of Ionic Liquid – Metal Salt Mixtures for Electrochemical Applications

  • Salgado, Josefa
  • Parajó, Juan José
  • Villanueva López, María
  • Rodríguez, Julio R.
  • Cabeza, Óscar
  • Varela, Luis M.
This is an accepted version of the published document., [Abstract] The effect of the nitrate salt addition on the liquid range of the protic ionic liquid ethylammonium nitrate (EAN) was studied in this work. The salts used were monovalent, LiNO3; divalent, Mg(NO3)2 and Ca(NO3)2, and trivalent, Al(NO3)3; inorganic salts containing metals relevant for electrochemical applications. Solid-liquid transitions, which define the lower limit of the liquid range of the fluids, were determined using differential scanning calorimetry (DSC), whereas the upper limit, which is given by degradation or boiling temperatures, was determined by means of thermogravimetric analysis (TGA). Our results show that salt addition induces melting-point depressions, but no significant boiling point elevations were detected. The so-called nanostructured solvation mechanism is used in order to rationalize the thermodynamics of the mixtures in terms of the occurrence of highly incompressible, low mobility solvation complexes [M(NO3)n]z+−n in the polar cavities of the IL giving rise to pseudo-lattice nanocrystals that are stable in the liquid phase., Authors acknowledge M. Gómez (RIAIDT-USC) for the technical support in DSC measurements. This work was supported by Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P as well as by Xunta de Galicia through GRC ED431C 2016/001 and ED431E 2018/08 projects and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; ED431D 2017/06
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Borophene vs. graphene interfaces: Tuning the electric double layer in ionic liquids

  • Gómez-González, Víctor
  • Otero-Mato, J. Manuel
  • Montes-Campos, Hadrián
  • García-Andrade, Xabier
  • García-Fuente, Amador
  • Vega, Andrés
  • Carrete, Jesús
  • Cabeza, Oscar
  • Gallego, Luis J.
  • Varela, Luis M.
In this work we perform molecular dynamics simulations of mixtures of a prototypical protic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), with lithium tetrafluoroborate (LiBF4), confined between two borophene walls of three different surface charges, −1, 0 and +1 e/nm2, where e is the elementary charge. The properties of the system are analyzed by means of ionic density profiles, angular orientations of [BMIM]+ cations close to the wall and vibrational densities of states for the salt cations close to the walls. The lateral structure of the first layer close to the surface is also studied on one hand, calculating Minkowski parameters and the Shannon entropy of the patterns of the 2D density maps of the anions placed there and, on the other hand, computing the 2D-Fourier transform of the positions of these anions. Our results are compared with those obtained previously for the same mixtures confined between two graphene walls. Although similarities exist between both cases, interesting differences are observed in the lateral structure that the ionic liquid adopts near borophene interfaces due to their strong anisotropy. In particular, we have observed that borophene induces more markedly ordered 2D patterns in the innermost layer of the ionic liquid electric double layer, specially when they are charged. It is this feature that makes borophene a potential candidate for battery electrode applications with possibilities beyond those of graphene., The financial support of the Spanish Ministry of Economy and Competitiveness (Projects MAT2017-89239-C2-1-P, MAT2017-89239-C2-2-P, CTQ2015-65816-R and PGC2018-093745-B-I00) is gratefully acknowledged. Moreover, this work was funded by the Xunta de Galicia (ED431D 2017/06, ED431E 2018/08 and GRC ED431C 2016/001) and the Junta de Castilla y León (Project VA124G18). All these research projects were partially supported by FEDER. H. M-C. and J. M. O-M. thank the Spanish Ministry of Education for their FPU grant. Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged, as well as funding from the European Union (COST Actions CM1206 and MP1303)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ionic liquids nanoconfined in zeolite-templated carbon: A computational study

  • Montes-Campos, Hadrián
  • Méndez-Morales, T.
  • Otero-Mato, J. Manuel
  • Cabeza, Oscar
  • Gallego, Luis J.
  • Lomba, Enrique
  • Varela, Luis M.
12 pags., 17 figs., 1 tab., Molecular dynamics simulations are reported for a protic (ethylammonium nitrate) and an aprotic (1-ethyl-3-methylimidazolium tetrafluoroborate) ionic liquid nanoconfined inside a faujasite-templated carbon. The structure and dynamics of ionic species inside nanotubes of relevant sizes are studied in order to understand the behavior of the dense ionic solvents in the zeolite-templated carbon. The structure (density, coordination numbers) of the confined fluid reflects a mixed dimensionality inside the zeolite-templated carbon, while the single-particle dynamics shows fundamental changes relative to that of ionic liquids confined in carbon nanotubes. Finally, no significant differences are found between the protic and the aprotic ionic liquids, which seems to suggest that the influence of hydrogen bonding is heavily suppressed inside the zeolite-templated carbon., The financial support of the Spanish Ministry of Economy and Competitiveness (Projects MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P) is gratefully acknowledged. Moreover, this work was fundedby the Xunta de Galicia (ED431D 2017/06, ED431E 2018/08 and GRCED431C 2016/001). All these research projects were partially supportedby FEDER. H.M.-C. and J.M.O.-M. thank the Spanish Ministry of Education for their FPU grant. T. M.-M. thanks the Spanish Ministry of Science,Innovation and Universities for her Juan de la Cierva grant (IJC2018-036774-I). E.L acknowledges the support from the Agencia Estatal deInvestigación and Fondo Europeo de Desarrollo Regional (FEDER) undergrant No. FIS2017-89361-C3-2-P. Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged.