Skip to main content

MODELIZACION, ANALISIS Y SIMULACION NUMERICA DE PROBLEMAS TERMOMECANICOS ACOPLADOS Y SU APLICACION A INCENDIOS DE ESTRUCTURAS Y DETECCION DE DAÑOS

MTM2011-23976

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Mathematical modelling and numerical simulation of the heat transfer in a trough of a blast furnace

  • Vázquez Fernández, Sara
  • García-Lengomín, Alejandro
  • Lausín-González, Cristina
  • Quintela Estévez, Peregrina
In this article, we address the numerical simulation of the cross section of a blast furnace (BF) trough to ensure its durability based on the location of the critical isotherms, so the objective is to know the heat transfer from the trough walls in contact with the hot liquids flowing inside (hot metal and slag) to the lining of the trough, which is in contact with air. With this aim, we propose a 2D heat transfer mathematical model which is solved using a finite element method (FEM). The proposed model is based on energy balance equation, and Fourier's law to relate the heat flux and the temperature gradients are assumed. The convective and radiative heat transfers as well as Dirichlet temperatures are included as boundary conditions, and the radiation view factor concept is considered, introducing an additional nonlinearity in the model. This factor plays a key role in the radiation heat transfer between the slag surface and the wall inside the trough in contact with air, which receives the radiation of the slag. The proposed 2D heat transfer model is applied in two sections: at the middle of the trough and downstream. The numerical simulations are performed using a FEM, and their numerical results are compared with the experimental data from a measurements campaign in a BF. The results demonstrate that the model can reproduce quite accurately the temperature distribution in BF troughs.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A new methodology for element partition and integration procedures for XFEM

  • Cao Rial, María Teresa
  • Moreno Gonzalez, Carlos Antonio
  • Quintela-Estévez, Peregrina
This is an ACCEPTED VERSION of the following published document: Cao-Rial, M.T., Moreno, C., & Quintela, P. (2016). A new methodology for element partition and integration procedures for XFEM. Finite Elements in Analysis and Design, 113, 1–13 https://doi.org/10.1016/j.finel.2015.12.012 © 2016 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, [Abstract] An overview of the particularities of the extended finite element method implementation in contrast with the classical FEM is presented. The most relevant difficulty lies in the integration over elements containing jumps or singularities, since a classical quadrature rule cannot be applied. We present an algorithm which, avoiding a casuistic analysis, automatically partitions an enriched element and constructs a new quadrature formula for those elements that preserves the integration order from the original one., This work was co-financed with FEDER and Xunta de Galicia funds under the GRC2013-014 grant as well as Plan Nacional de IþDþi (MTM2008-05682/MTM, MTM2011-23976), and Xunta de Galicia (project INCITE09PXIB207093PR)., Xunta de Galicia; GRC2013-014, Xunta de Galicia; INCITE09PXIB207093PR