Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Targeted Cargo Delivery in Senescent Cells Using Capped Mesoporous Silica Nanoparticles

  • Agostini, Alessandro
  • Mondragón Martínez, Laura
  • Soto Camino, Juan
  • Costero, Ana
  • Manguan-García, Cristina
  • Perona, Rosario
  • Moreno Torres, Marta
  • Aparicio Sanchis, Rafael
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Murguía, Jose R.|||0000-0001-9364-4603
We thank the Spanish Government (projects MAT2009-14564-C04 and FIS PI11-0949) the Generalitat Valencia (project PROMETEO/2009/016), and the Universidad Politecnica de Valencia (UPV PAID-05-09) for support. We thank Fundacion Ramon Areces for support. C. M.-G. is supported by CIBERER. L. M. thanks the Generalitat Valenciana for her VALI + D postdoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Self-similar focusing with generalized devil&apos, s lenses

  • Casanova, Cristina
  • Furlan, Walter D.
  • Remón Martín, Laura
  • Calatayud Calatayud, Arnau
  • Mendoza-Yero, Omel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We introduce the generalized devil's lenses (GDLs) as a new family of diffractive kinoform lenses whose structure is based on the generalized Cantor set. The focusing properties of different members of this family are analyzed. It is shown that under plane wave illumination the GDLs give a single main focus surrounded by many subsidiary foci. It is shown that the total number of subsidiary foci is higher than the number of foci corresponding to conventional devil's lenses; however, the self-similar behavior of the axial irradiance is preserved to some extent. (C) 2011 Optical Society of America, We acknowledge the financial support from the Ministerio de Ciencia e Innovacion, Spain, grants DPI2008-02953, TRA2009-0215, and FIS2010-15746. We also acknowledge the support from Generalitat Valenciana (PROMETEO2009-077 and ACOMP/2010/052), and from Universidad Politecnica de Valencia, Spain (PAID-05-09 and PAID-06-08). L. Remon acknowledges a fellowship of "Fundacion Cajamurcia," Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient orthogonal matrix polynomial based method for computing matrix exponential

  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ruíz Martínez, Pedro Antonio|||0000-0001-9215-5437
The matrix exponential plays a fundamental role in the solution of differential systems which appear in different science fields. This paper presents an efficient method for computing matrix exponentials based on Hermite matrix polynomial expansions. Hermite series truncation together with scaling and squaring and the application of floating point arithmetic bounds to the intermediate results provide excellent accuracy results compared with the best acknowledged computational methods. A backward-error analysis of the approximation in exact arithmetic is given. This analysis is used to provide a theoretical estimate for the optimal scaling of matrices. Two algorithms based on this method have been implemented as MATLAB functions. They have been compared with MATLAB functions funm and expm obtaining greater accuracy in the majority of tests. A careful cost comparison analysis with expm is provided showing that the proposed algorithms have lower maximum cost for some matrix norm intervals. Numerical tests show that the application of floating point arithmetic bounds to the intermediate results may reduce considerably computational costs, reaching in numerical tests relative higher average costs than expm of only 4.43% for the final Hermite selected order, and obtaining better accuracy results in the 77.36% of the test matrices. The MATLAB implementation of the best Hermite matrix polynomial based algorithm has been made available online. © 2011 Elsevier Inc. All rights reserved., This work has been supported by the Programa de Apoyo a la Investigacion y el Desarrollo of the Universidad Politecnica de Valencia PAID-05-09-4338, 2009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of SERPENT and SCALE methodology for LWRs transport calculations and additionally uncertainty analysis for cross-section perturbation with SAMPLER module

  • Olmo-Juan, Nicolás
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Labarile, A.|||0000-0003-1610-7606
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In nuclear safety research, the quality of the results of simulation codes is widely determined by the reactor design and safe operation, and the description of neutron transport in the reactor core is a feature of particular importance. Moreover, for the long effort that is made, there remain uncertainties in simulation results due to the neutronic data and input specification that need a huge effort to be eliminated. A realistic estimation of these uncertainties is required for finding out the reliability of the results. This explains the increasing demand in recent years for calculations in the nuclear fields with best-estimate codes that proved confidence bounds of simulation results. All this has lead to the Benchmark for Uncertainty Analysis in Modelling (UAM) for Design, Operation and Safety Analysis of LWRs of the NEA. The UAM-Benchmark coupling multi-physics and multi-scale analysis using as a basis complete sets of input specifications of boiling water reactors (BWR) and pressurized water reactors (PWR). In this study, the results of the transport calculations carried out using the SCALE-6.2 program (TRITON/NEWT and TRITON/KENO modules) as well as Monte Carlo SERPENT code, are presented. Additionally, they have been made uncertainties calculation for a PWR 15 15 and a BWR 7 7 fuel elements, in two different configurations (with and without control rod), and two different states, Hot Full Power (HFP) and Hot Zero Power (HZP), using the TSUNAMI module, which uses the Generalized Perturbation Theory (GPT), and SAMPLER, which uses stochastic sampling techniques for cross-sections perturbations. The results obtained and validated are compared with references results and similar studies presented in the exercise I-2 (Lattice Physics) of UAM-Benchmark., This work has been supported by the Generalitat Valenciana under GRISOLIA/2013/A/006 (037) subvention and partially under Project PROMETEOII/008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La rotación de puestos de trabajo como medio para la integración de trabajadores con discapacidad, Job rotation as a method for disabled workers integration

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
[ES] La Rotación de Puestos de Trabajo permite la variación de las tareas llevadas a cabo por los trabajadores y el tiempo empleado en cada una de ellas, facilitando la alternancia de los grupos musculares utilizados y la incorporación progresiva de trabajadores con problemas músculo-esqueléticos. Con la rotación es posible asignar a los trabajadores limitados a puestos compatibles con sus capacidades y restringir el tiempo que se exponen a factores de riesgo a los que son especialmente sensibles.Este trabajo presenta la aplicación del algoritmo DPI-ASEPEYO al diseño de agendas de RPT para prevenir los trastornos músculo-esqueléticos e integrar a trabajadores con limitaciones físicas, psíquicas o de comunicación en entornos de trabajo caracterizados por una elevada repetitividad de movimientos, como ocurre, por ejemplo, en las líneas de ensamblaje., [EN] Job rotation allows workers to vary their tasks and the time employed in each one of them, facilitating the change of the muscular groups used and the progressive incorporation of workers with musculoskeletal disorders. With the job rotation is possible to assign workers to workstations compatible with their limited capacities and to restrict the time that they are exposed to risk factors to which they are especially sensible. This paper presents the application of DPI-ASEPEYO algorithm, to the design of Job Rotation schedules to prevent musculoskeletal disorders and to integrate workers with physical, psychic or communication limitations in environs characterized by high repetitive movements as it happens, for example, in assembly lines., Agradecemos a la Universidad Politécnica de Valencia su apoyo a esta investigación a través de su Programa de Apoyo a la Investigación y Desarrollo 2009 y su financiación a través de los proyectos PAID-06-09/2902 y PAID-05-09/4215.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrasonic evaluation of the hydration degree of the orange peel

  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Redondo, Javier|||0000-0002-5507-7799
  • Roig, Bernardino|||0000-0002-9599-572X
The elastic parameters of fruit and vegetables are normally monitored in quality control processes as there is a good correlation to the degrees of firmness, turgidity and humidity. These parameters have been traditionally measured by means of penetration tests, which are destructive. This has resulted in the increased attention recently given to ultrasonic techniques applied to the quality evaluation of horticultural commodities. Nevertheless, since most of the fruit and vegetables display a viscoelastic behavior, the penetration test should be considered to be quasi-static, especially when compared with the speeds associated with the ultrasonic tests. Both methods should provide different values for the elastic parameters. The aim of this work is to study this discrepancy in the values of the elastic parameters and interpret the elastodynamic behavior of the vegetable tissue under an ultrasound test. Thus, the paper presents an ultrasonic nondestructive method to evaluate the elastic parameters of the sweet orange peel at 40. kHz. The complete dehydration process of two sets of oranges (Navelina and Ortanique) was monitored for 2. months. A linear elastic solid model with viscous losses was numerically solved using a simulation scheme based on a 3D-Spherical FDTD method (Finite-Difference Time-Domain) in order to interpret the results, which proved that the elastic parameters obtained by penetration and ultrasonic tests differ. The method provides an empirical relation between the hydration state and the elastic parameters of the orange peel. Therefore, the proposed ultrasonic test reported in this work is capable of determining the hydration state of the orange simply by measuring the propagation speed of the Rayleigh waves on the orange peel, and hence, can be used as a fruit quality index during postharvest processes. © 2012 Elsevier B.V., This study was supported by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-09-002-618), (PAID-06-10-002-295) of Universidad Politecnica de Valencia. The authors would like to thank K. Y. Foo, from the University of Birmingham and P. Malischewsky from the University Friedrich-Schiller at Jena, for the fruitful discussions regarding surface acoustic waves.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Caracterización del campo acústico generado por transductores focalizados

  • Adrián Martínez, Silvia
  • Makov, Yu N.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] The study of the acoustic field characteristics generated by focusing sources, both in linear and nonlinear regime, is an active field of research as they are relevant in most of the ultrasonic applications in medicine and industry. In this work we evaluate, experimentally and numerically the linear shift phenomenon (the distance between the geometrical focus of the focused source and the on-axis maximum pressure position in linear regime, real focus) and the nonlinear shift phenomenon (the movement of the pressure maximum position along the axis of focused acoustic beams under increasing driving voltages) of an ultrasonic beam with medium Fresnel number (NF=6), it is important to cover this region of focusing as some of the medical devices are there, as well as we demonstrate that the nonlinear shift is able to move the on axis maximum pressure location beyond the geometrical focus., [ES] El estudio de las características del campo acústico generado por fuentes ultrasónicas focalizadas es un activo campo de investigación dada la relevancia que éstas poseen tanto en aplicaciones médicas como industriales. En este trabajo se evalúa, experimental y numéricamente, el desplazamiento de foco lineal (distancia entre el foco geométrico de la fuente y la posición del máximo de presión en el eje: foco real) y el desplazamiento de foco no lineal (desplazamiento del máximo de presión en el eje al aumentar la tensión aplicada al transductor) en un haz ultrasónico generado por un transductor de focalización media (NF=6). Se comprueba que los máximos de presión y rarefacción se desplazan en sentido opuesto al aumentar la potencia suministrada al transductor, y que el máximo de presión en el eje llega a superar la posición del foco geométrico del transductor., La autora principal de este trabajo quiere expresar su agradecimiento a la Sociedad Española de Acústica por la oportunidad concedida a través del premio “Andrés Lara” para continuar con su investigación. Este trabajo ha sido financiado por el Ministerio de Ciencia y Tecnología dentro del proyecto FIS2008-06024-C03- 03 y por el Programa de Apoyo a la Investigación y Desarrollo de la Universidad Politécnica de Valencia (PAID-05-09) (002-618).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enfoques para la Resolución del Problema ELSP

  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
[ES] En este trabajo se pretende realizar una recopilación de los enfoques planteados en la literatura para la resolución del problema de Programación del Lote Económico, esto es, ELSP. Estos métodos son: Solución Independiente, Ciclo Común, Periodo Básico, Periodo Básico Extendido y Variación del Tamaño de Lote. Para cada una de las aproximaciones de solución se plantea a quien son atribuidas, el correspondiente modelo, así como una serie de referencias que lo han empleado., Este trabajo ha sido realizado gracias a la financiación de la Universidad Politécnica de Valencia, a través del proyecto PAID-05-09-4335 "Coordinación de flujos de materiales e información en sistemas distribuidos de producción".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Updating the Lambda modes of a nuclear power reactor

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Starting from a steady state configuration of a nuclear power reactor some situations arise in which the reactor configuration is perturbed. The Lambda modes are eigenfunctions associated with a given configuration of the reactor, which have successfully been used to describe unstable events in BWRs. To compute several eigenvalues and its corresponding eigenfunctions for a nuclear reactor is quite expensive from the computational point of view. Krylov subspace methods are efficient methods to compute the dominant Lambda modes associated with a given configuration of the reactor, but if the Lambda modes have to be computed for different perturbed configurations of the reactor more efficient methods can be used. In this paper, different methods for the updating Lambda modes problem will be proposed and compared by computing the dominant Lambda modes of different configurations associated with a Boron injection transient in a typical BWR reactor. (C) 2010 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tridimensional block multiword LDPC decoding on GPUs

  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Vidal Maciá, Antonio Manuel
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] In this paper, we describe a parallel algorithm for LDPC (Low Density Parity Check codes) decoding on a GPU (Graphics Processing Unit) using CUDA (Compute Unified Device Architecture). The strategy of the kernel grid and block design is shown and the multiword decoding operation is described using tridimensional blocks. The performance (speedup) of the proposed parallel algorithm is slightly better than the performance found in the literature when this is relatively good, and shows a great improvement in those cases with previously reported moderate or bad performance. © 2011 Springer Science+Business Media, LLC., This work was financially supported by the Spanish Ministerio de Ciencia e Innovación (Projects TIN2008-06570-C04-02, TEC2009-13741 and TEC2008-06787), Universidad Politécnica de Valencia through “Programa de Apoyo a la Investigación y Desarrollo (PAID-05-09)” and Generalitat Valenciana through project PROMETEO/2009/013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

All silicon waveguide spherical microcavity coupler device

  • Xifre Perez, Elisabet
  • Doménech Gómez, José David
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • P. Muñoz|||0000-0001-6026-1649
  • Capmany Francoy, José|||0000-0002-6460-4167
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
A coupler based on silicon spherical microcavities coupled to silicon waveguides for telecom wavelengths is presented. The light scattered by the microcavity is detected and analyzed as a function of the wavelength. The transmittance signal through the waveguide is strongly attenuated (up to 25 dB) at wavelengths corresponding to the Mie resonances of the microcavity. The coupling between the microcavity and the waveguide is experimentally demonstrated and theoretically modeled with the help of FDTD calculations. © 2011 Optical Society of America., The authors wish to acknowledge financial support from projects FIS2009-07812; Consolider Nanolight.es 2007/0046 and Nº 1841; the Spanish Education and Science Ministry, TEC2008- 06145; the Generalitat Valenciana, project PROMETEO/2008/092 and PROMETEO/2010/043; and project Apoyo a la investigación 2009 from Universidad Politecnica de Valencia, nº reg. 4325. E. Xifré-Pérez acknowledges the financial support from the program Juan de la Cierva (Spanish Ministerio de Educación y Ciencia). J. D. Doménech acknowledges the FPI research grant BES-2009-018381. Finally we thank Prof. J. Garcia de Abajo for providing us with the MESME theoretical program we have used in the calculation of electric field intensity distribution of the Mie modes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

  • Badia, J.D.
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percentage of crystalline fraction remained nearly constant. A deeper analysis of the melting behaviour, the segmental dynamics around the glass-rubber relaxation, and the macroscopic mechanical performance, showed the role of each fraction leading to a loss of thermal, viscoelastic and mechanical features, particularly remarkable after the first processing cycle. © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a pre-doctoral research position to J.D. Badía by means of the FPU program conceded by the Spanish Ministry for Education. Catalana de Polimers, S.A. and AIMPLAS are acknowledged for providing and processing the material, respectively. Mr. Peter Kaali is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh for helping with SEM analysis. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189 and the Gerónimo Forteza grant to J.D. Badía. Universitat Politècnica de València (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal Institute of Technology (KTH, Sweden) is thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-time massive convolution for audio applications on GPU

  • Belloch Rodríguez, José Antonio
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Vidal Maciá, Antonio Manuel
[EN] Massive convolution is the basic operation in multichannel acoustic signal processing. This field has experienced a major development in recent years. One reason for this has been the increase in the number of sound sources used in playback applications available to users. Another reason is the growing need to incorporate new effects and to improve the hearing experience. Massive convolution requires high computing capacity. GPUs offer the possibility of parallelizing these operations. This allows us to obtain the processing result in much shorter time and to free up CPU resources. One important aspect lies in the possibility of overlapping the transfer of data from CPU to GPU and vice versa with the computation, in order to carry out real-time applications. Thus, a synthesis of 3D sound scenes could be achieved with only a peer-to-peer music streaming environment using a simple GPU in your computer, while the CPU in the computer is being used for other tasks. Nowadays, these effects are obtained in theaters or funfairs at a very high cost, requiring a large quantity of resources. Thus, our work focuses on two mains points: to describe an efficient massive convolution implementation and to incorporate this task to real-time multichannel-sound applications. © 2011 Springer Science+Business Media, LLC., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion (Projects TIN2008-06570-C04-02 and TEC2009-13741), Universidad Politecnica de Valencia through PAID-05-09 and Generalitat Valenciana through project PROMETEO/2009/2013
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Targeted cargo delivery in senescent cells using capped mesoporous silica nanoparticles

  • Agostini, Alessandro
  • Mondragón Martínez, Laura
  • Soto Camino, Juan
  • Costero, Ana
  • Manguan-García, Cristina
  • Perona, Rosario
  • Moreno-Torres, Marta
  • APARICIO-SANCHIS, RAFAEL
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Murguía, Jose R.|||0000-0001-9364-4603
[EN] Learning to let go with age: Intracellular controlled release of molecules within senescent cells was achieved using mesoporous silica nanoparticles (MSNs) capped with a galacto-oligosaccharide (GOS) to contain the cargo molecules (magenta spheres; see scheme). The GOS is a substrate of the senescent biomarker, senescence-associated ß-galactosidase (SA-ß-gal), and releases the cargo upon entry into SA-ß-gal expressing cells., We thank the Spanish Government (projects MAT2009-14564-C04 and FIS PI11-0949) the Generalitat Valencia (project PROMETEO/2009/016), and the Universidad Politecnica de Valencia (UPV PAID-05-09) for support. We thank Fundacion Ramon Areces for support. C. M.-G. is supported by CIBERER. L. M. thanks the Generalitat Valenciana for her VALI + D postdoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modified Block Newton method for the lambda modes problem

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] To study the behaviour of nuclear power reactors it is necessary to solve the time dependent neutron diffusion equation using either a rectangular mesh for PWR and BWR reactors or a hexagonal mesh for VVER reactors. This problem can be solved by means of a modal method, which uses a set of dominant modes to expand the neutron flux. For the transient calculations using the modal method with a moderate number of modes, these modes must be updated each time step to maintain the accuracy of the solution. The updating modes process is also interesting to study perturbed configurations of a reactor. A Modified Block Newton method is studied to update the modes. The performance of the Newton method has been tested for a steady state perturbation analysis of two 2D hexagonal reactors, a perturbed configuration of the IAEA PWR 3D reactor and two configurations associated with a boron dilution transient in a BWR reactor., This work has been partially supported by the Spanish Ministerio de Educación y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politécnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using proper generalized decomposition to compute the dominant mode of a nuclear reactor

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Proper generalized decomposition is a recently developed technique that solves some multidimensional problems using auxiliar models in a lower dimensional space. A method based on this technique together with the Newton method for the computation of eigenvalues is proposed to obtain the dominant eigenvalue of a nuclear power reactor core and its corresponding eigenvector. The method is tested using the bidimensional reactor Biblis., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The use of electrical impedance spectroscopy for monitoring the hydration products of Portland cement mortars with high percentage of pozzolans

  • Cruz González, José Mª|||0000-0002-1672-6354
  • Fita Fernández, Inmaculada Concepción|||0000-0002-0927-3668
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
In this paper, mortars and pastes containing large replacement of pozzolan were studied by mechanical strength, thermogravimetric analysis (TGA), scanning electronic microscopy (SEM), mercury intrusion porosimetry (MIP) and electrical impedance spectroscopy (EIS). The effect of metakaolin (35%) and fly ash (60%) was evaluated and compared with an inert mineral addition (andalusite). The portlandite content was measured, finding that the pozzolanic reaction produced cementing systems with all portlandite fixed. The EIS measurements were analyzed by the equivalent electrical circuit (EEC) method. An EEC with three branches in parallel was applied. The dc resistance was related to the degree of hydration and allowed us to characterize plain and blended mortars. A constant phase element (CPE) quantified the electrical properties of the hydration products located in the solid¿solution interface and was useful to distinguish the role of inert and pozzolanic admixtures present in the cement matrix., The authors thank the Universitat Politecnica de Valencia (UPV, Vicerrectorado de Investigacion) for its support (project PAID-05-09 ref 4302) and Debra Westall (UPV) for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

REA 3D-dynamic analysis in Almaraz NPP with RELAP5/PARCS v2.7 and SIMTAB cross-sections tables

  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Garcia-Fenoll, Marina
  • Ánchel Añó, Francisco Constantino
  • Pereira, C.
  • da Silva, C
  • Ortego, A.
  • Martínez-Murillo, J.C
[EN] The Rod Ejection Accident (REA) belongs to the Reactivity-Initiated Accidents (RIA) category of accidents and it is part of the licensing basis accident analyses required for pressurized water reactors (PWR). The REA at Hot Zero Power (HZP) is characterized by a single rod ejection from a core position with a very low power level. The evolution consists basically of a continuous reactivity insertion. The main feature limiting the consequences of the accident in a PWR is the Doppler Effect. To check the performance of the coupled code RELAP5/PARCS v2.7 a REA in Almaraz NPP is simulated. These analyses will allow knowing more accurately the PWR real plant phenomenology in the RIA most limiting conditions., This work has been partially supported by the Spanish Ministerio de Educación y Ciencia under project PHB2007-0067-PC and by the Brazilian Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) under project CAPES/DGU 159/08. This work has also been partially supported by the Spanish Ministerio de Educación y Ciencia under project ENE2008-02669, the Generalitat Valenciana under project ACOMP/2009/058, and the Universitat Politècnica de València under project PAID-05-09-4285. The authors wish to acknowledge the technical and financial support of the Almaraz-Trillo AIE for this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Label-free antibody detection using band edge fringes in SOI planar photonic crystal waveguides in the slow-light regime

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Griol Barres, Amadeu
  • Maquieira, Angel|||0000-0003-4641-4957
  • Toccafondo, Veronica
  • Garcia Castello, Javier
  • Peransi-Llopis, Sergio
[EN] We report experimental results of label-free anti-bovine serum albumin (anti-BSA) antibody detection using a SOI planar photonic crystal waveguide previously bio-functionalized with complementary BSA antigen probes. Sharp fringes appearing in the slow-light regime near the edge of the guided band are used to perform the sensing. We have modeled the presence of these band edge fringes and demonstrated the possibility of using them for sensing purposes by performing refractive index variations detection, achieving a sensitivity of 174.8 nm/RIU. Then, label-free anti-BSA biosensing experiments have been carried out, estimating a surface mass density detection limit below 2.1 pg/mm(2) and a total mass detection limit below 0.2 fg., This work was funded by the European Commission, carried out within the FP7-ICT-223932- INTOPSENS project, and by Spanish MICINN under contracts TEC2008-06333 and CTQ2007-64735/BQU. Support from the Universidad Politécnica de Valencia through programs PAID-05-09 and PAID-06-09 and the Conselleria d Educació through program GV2010-031 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modal processing of the Local Power Range Monitors signals in BWR NPP

  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Barrachina, Teresa|||0000-0001-8794-4204
In a boiling water reactor (BWR), the power distribution can be varied both axially and radially by control rod manipulation and by void content variations in the moderator. As an example of accidental situations in nuclear power plants (NPP), we consider the power oscillations that can occur in a BWR NPP under certain circumstances. An interesting problem is to study and characterize these instabilities analyzing the neutronic power signals obtained from the Local Power Range Monitors (LPRMs) installed in the reactor core. Several techniques exist to detect and classify the possible oscillations in a BWR. The power modal decomposition method and the signal component analysis methodologies are reviewed. The performance of these techniques is compared analyzing Records 9 and 10 of cycle 14 of the OECD Ringhals 1 Stability Benchmark. © 2011 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uncertainty and sensitivity of neutron kinetic parameters in the dynamic response of a PWR rod ejection accident coupled simulation

  • Mesado Melia, Carles
  • Soler Martínez, María Desamparados
  • García-Díaz, J. Carlos
  • Macián-Juan, R
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
In nuclear safety analysis, it is very important to be able to simulate the different transients that can occur in a nuclear power plant with a very high accuracy. Although the best estimate codes can simulate the transients and provide realistic system responses, the use of nonexactmodels, together with assumptions and estimations, is a source of uncertainties whichmust be properly evaluated. This paper describes a Rod Ejection Accident (REA) simulated using the coupled code RELAP5/PARCSv2.7 with a perturbation on the cross-sectional sets in order to determine the uncertainties in the macroscopic neutronic information. The procedure to performthe uncertainty and sensitivity (U&S) analysis is a sampling-based method which is easy to implement and allows different procedures for the sensitivity analyses despite its high computational time. DAKOTA-Jaguar software package is the selected toolkit for the U&S analysis presented in this paper. The size of the sampling is determined by applying the Wilks¿ formula for double tolerance limits with a 95% of uncertainty and with 95% of statistical confidence for the output variables. Each sample has a corresponding set of perturbations that will modify the cross-sectional sets used by PARCS. Finally, the intervals of tolerance of the output variables will be obtained by the use of nonparametric statistical methods., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under Project ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universitat Politecnica de Valencia under Project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the computation of output bounds on parallel inputs pharmacokinetic models with parametric uncertainty

  • de Pereda Sebastián, Diego
  • Romero Vivó, Sergio|||0000-0001-6689-4324
  • Bondía Company, Jorge|||0000-0001-7286-3719
Pharmacokinetic models are of utmost importance in drug and medical research. The class of parallel inputs models consists of two or more linear chains connected together in parallel. It has been used to represent pharmacokinetic processes in which the input shows effects on the output with different delays in time. Due to physiological variability, the exact values of the model parameters are uncertain, but they can be bounded by intervals. In this case, the computation of output bounds can be posed as the solution of an initial value problem (IVP) for ordinary differential equations (ODEs) with uncertain initial conditions. However, current methods may produce a significant overestimation. In this paper, a new method to minimise overestimation when using the parallel inputs model is proposed and applied to two cases: subcutaneous insulin absorption for artificial pancreas research, and the study of the double-peak phenomenon observed for certain drugs. Our proposal consists in performing a model reduction in conjunction with analytical solutions of the input chains and a monotonicity analysis of model states and parameters. This method allows obtaining tighter output bounds with low computational cost compared to the latest techniques., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion through Grant DPI-2010-20764-C02, and by the Universitat Politecnica de Valencia through Grant PAID-05-09-4334.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of microstructural properties of 3Y-TZP materials by conventional and non-conventional sintering techniques

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • E. Rayón|||0000-0002-0653-2046
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
3 mol% Y2O3-stabilized zirconia nanopowders were fabricated using various sintering techniques; conventional sintering (CS) and non-conventional sintering such as microwave (MW) and pulsed electric current-assisted-sintering (PECS) at 1300 °C and 1400 °C. A considerable difference in the densification behaviour between conventional and non-conventional sintered specimens was observed. The MW materials attain a bulk density 99.4% theoretical density (t.d.) at 1300 °C, while the CS materials attain only 92.5% t.d. and PECS 98.7% t.d. Detailed microstructural evaluation indicated that a low temperature densification leading to finer grain sizes (135 nm) could be achieved by PECS followed by MW with an average sintered grain size of 188 nm and CS 225 nm. It is believed that the high heating rate and effective particle packing are responsible for the improvements in these properties. © 2011 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved., This work has been carried out with programme to support research and development of the Polytechnic University of Valencia (U.P.V) under multidisciplinary projects PAID-05-09 and PAID-05-10. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her FPI Ph.D. grant and the people from Institute Technological of Materials (ITM) of the U.P.V for helping us with the microwave experiments during a stay in 2010-2011. Felipe L. Pefiaranda-Foix wants to thank the Generalitat Valenciana for the grant obtained in the frame of the Program BEST/2010, because some results of this paper have been possible with this help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the prediction of glucose concentration under intra-patient variability in type 1 diabetes: A monotone systems approach

  • de Pereda Sebastián, Diego
  • Romero Vivó, Sergio|||0000-0001-6689-4324
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • Bondía Company, Jorge|||0000-0001-7286-3719
Insulin therapy in type 1 diabetes aims to mimic the pattern of endogenous insulin secretion found in healthy subjects. Glucose-insulin models are widely used in the development of new predictive control strategies in order to maintain the plasma glucose concentration within a narrow range, avoiding the risks of high or low levels of glucose in the blood. However, due to the high variability of this biological process, the exact values of the model parameters are unknown, but they can be bounded by intervals. In this work, the computation of tight glucose concentration bounds under parametric uncertainty for the development of robust prediction tools is addressed. A monotonicity analysis of the model states and parameters is performed. An analysis of critical points, state transformations and application of differential inequalities are proposed to deal with non-monotone parameters. In contrast to current methods, the guaranteed simulations for the glucose-insulin model are carried out by considering uncertainty in all the parameters and initial conditions. Furthermore, no time-discretisation is required, which helps to reduce the computational time significantly. As a result, we are able to compute a tight glucose envelope that bounds all the possible patient's glycemic responses with low computational effort. (C) 2012 Elsevier Ireland Ltd. All rights reserved., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion through Grant DPI-2010-20764-C02, by the Universitat Politecnica de Valencia through Grant PAID-05-09-4334, and by the Generalitat Valenciana through Grant GV/2012/085.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of Laguerre matrix polynomials to the numerical inversion of Laplace transforms of matrix functions

  • Sastre, Jorge|||0000-0002-8612-6717
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Jódar Sánchez, Lucas Antonio|||0000-0002-9672-6249
This paper presents an application of Laguerre matrix polynomial series to the numerical inversion of Laplace transforms of matrix functions. © 2011 Elsevier Ltd. All rights reserved., This work has been supported by the Programa de Apoyo a la Investigacion y el Desarrollo of the Universitat Politecnica de Valencia grant PAID-05-09-4338 and the Spanish Ministerio de Educacion grant MTM2009-08587.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance

  • Badía Valiente, José David
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper reports the effects of multiple mechanical recycling on the structure and properties of amorphous polylactide (PLA). The influence of the thermo-mechanical degradation induced by means of five successive injection cycles was initially addressed in terms of macroscopic mechanical properties and surface modification. A deeper inspection on the structure and morphology of PLA was associated to the thermal properties and viscoelastic behaviour. Although FT-IR analysis did not show significant changes in functional groups, a remarkable reduction in molar mass was found by viscometry. PLA remained amorphous throughout the reprocessing cycles, but the occurrence of a cold-crystallization during DSC and DMTA measurements, which enthalpy increased with each reprocessing step, suggested chain scission due to thermo-mechanical degradation. The effect of chain shortening on the glass-rubber relaxation studied by DMTA showed an increase in free volume affecting the segmental dynamics of PLA, particularly after the application of the second reprocessing step, in connection to the overall loss of performance showed by the remaining properties. © 2012 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a predoctoral research position to J.D. Badia by means of the FPU program conceded by the Spanish Ministry for Education. The authors acknowledge the financial support of the Generalitat Valenciana through the ACOMP/2011/189. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal institute of Technology (KTH, Sweden) is thanked for additional. Mr. Enrique Benavent at AIMPLAS is acknowledged for taking care of processing the material. Mr. Peter Kaali at KTH is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh at KTH for helping with SEM analysis. Mrs. L. Santonja-Blasco at UPV is thanked for endless and enjoyable discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biocleaning of nitrate alterations on wall paintings by Pseudomonas stutzeri

  • Bosch-Roig, Pilar|||0000-0003-2019-399X
  • Regidor Ros, Jose Luis|||0000-0002-1361-5050
  • Montes-Estellés, Rosa M|||0000-0002-4599-6644
Microorganisms have been considered as causative agents of biodeterioration in multiple artworks. In this paper, we argue that microorganisms can be positively used for the cleaning of salt crusts otherwise difficult to remove by traditional restoration methods. We use Pseudomonas stutzeri to efficiently clean wall paintings. The bacteria allow for adequate and homogenous removal of insoluble salt efflorescence without damaging the painted layer. We also make use of a new application support consisting of agar. This new technology has been successfully applied in the biocleaning of eighteen-century murals located in a lunette of the Santos Juanes church in Valencia, Spain., This work has appreciated partial financial support from the Universitat Politecnica de Valencia (PAID-05-09: Biotecnologia microbiana aplicada a la limpieza y restauracion de superficies de obras de arte), coordination by Rosa Maria Montes Estelles, and support from the Spanish Ministerio de Ciencia e Innovacion, with a Ph.D. scholarship for Pilar Bosch Roig (BES-2006-12110). The authors wish to thank to the priest of the Santos Juanes Church of Valencia; the 'Direccion General de Patrimonio'; Professor Pilar Roig Picazo; Gianluigi Colalucci, Donatella Zari and Carlo Giantomassi restorers of the Campo Santo di Pisa; Jose Juan Baldo and Irene Carpio, restorers of the Santos Juanes church of Valencia; to Mathieu Viau-Courville; the Instituto Universitario de Restauracion del Patrimonio; and Restaura BioTech S.L.; and particularly to Giancarlo Ranalli due to his invaluable help for the development of this manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accurate matrix exponential computation to solve coupled differential models in engineering

  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ruíz Martínez, Pedro Antonio|||0000-0001-9215-5437
The matrix exponential plays a fundamental role in linear systems arising in engineering, mechanics and control theory. This work presents a new scaling-squaring algorithm for matrix exponential computation. It uses forward and backward error analysis with improved bounds for normal and nonnormal matrices. Applied to the Taylor method, it has presented a lower or similar cost compared to the state-of-the-art Padé algorithms with better accuracy results in the majority of test matrices, avoiding Padé's denominator condition problems. © 2011 Elsevier Ltd., This work has been supported by Universidad Politecnica de Valencia grants PAID-05-09-4338, PAID-06-08-3307 and Spanish Ministerio de Educacion grant MTM2009-08587.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave Sintering of zirconia materials: Mechanical and microstructural properties

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
Commercially, 3mol% Y2O3-stabilized tetragonal zirconia (7090nm) compacts were fabricated using a conventional and a nonconventional sintering technique; microwave heating in a resonant mono-mode cavity at 2.45GHz, at temperatures in the 11001400 degrees C range. A considerable difference in the densification behavior between conventional (CS) and microwave (MW) sintered materials was observed. The MW materials attain a full density of 99.9% of the theoretical density (t.d.) at 1400 degrees C/10min, whereas the CS reach only 98.0% t.d. at the same temperature and 1h of dwelling time. Therefore, the MW materials exhibit superior Vickers hardness values (16.0GPa) when compared with CS (13.4GPa)., This work has been carried out under program to support research and development of the Polytechnic University of Valencia (U.P.V) under multidisciplinary projects, PAID-05-09 and PAID-05-10. A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her FPI Ph.D. grant and the people from Institute Technological of Materials (ITM) of the U.P.V for helping us with the microwave experiments during a stay in 2010-2011. Felipe L. Penaranda-Foix thanks the Generalitat Valenciana for the grant in the frame of the Program BEST/2010 because some results of this paper have been possible with this help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

  • Martinez-Felipe, Alfonso
  • Badia, J.D.
  • Santonja Blasco, Laura
  • Imrie, C.T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A multi-rate non-isothermal kinetic analysis of the isotropic-melt to liquid crystalline phase transition of novel liquid crystalline ionogenic copolymers, LCIs, the 10-(4-methoxyazobenzene-4'-oxy)decyl methacrylate]-co-2-(acrylamido-2-methyl-1-propanesulfonic acid)s, 10-MeOAzB/AMPS, copolymers, has been performed by means of calorimetric experiments. An analytical methodology which includes the study of the phase transition rate parameter, the determination of the activation energies by using Kissinger and Flynn-Wall-Ozawa models, and the study of the phase transition kinetics by the use of the Avrami theory, has been applied. The formation of the mesophases from the isotropic state occurred close to thermodynamic equilibrium. The results evidence the presence of several individual processes in the formation of liquid crystalline phases from the melt and a strong dependence of phase transition rates and activation energies with acid contents. A decrease in the phase transition rate, related to a decrease in the overall change of the transition entropy, has been observed. The final inhibition of the liquid crystal (LC) behaviour is ascribed to an exponential increase in the activation energy of the phase transition, promoted by strong acid aggregation. An optimum composition of the 10-MeOAzB/AMPS copolymers to achieve the dual characteristics of LCIs (ionogenic and liquid crystalline behaviour) requires acid concentrations capable of promoting structure-forming effects on the LC phases and the evolution of phase separated morphologies., The authors would like to acknowledge the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074 and three FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. The Vice-rectorate for Research of UPV is also thanked for additional support through the PAID 05-09-4331, PAID-05-11/2806, and PAID 06-11-2037 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Applying generalised feedforward neural networks to classifying industrial jobs in terms of risk of low back disorders

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Diego-Mas, Jose Antonio|||0000-0002-3698-3411
  • Alcaide-Marzal, Jorge|||0000-0001-7116-9784
[EN] This paper describes a new approach for the development of artificial neural networks applied to classifying the risk of low back disorders (LBDs) presented by certain lifting jobs. The development process of neural networks for classification problems and the influence of network architecture on its prediction and generalisation capabilities are analysed. The phenomenon of overfitting and its relationship to the number of network connections, and the size of the training data set are discussed. The new approach uses complex architecture networks and early stopping of training procedures to avoid overfitting. It is thus compared with previous studies and its results and advantages over them are assessed. Such comparison shows that this approach allows for the development of neural networks for the classification of industrial jobs according to their risk of causing LBDs in a way faster than previous procedures. The neural network obtained is able to correctly classify 81.6% of highly repetitive lifting industrial jobs as posing low or high-risk for LBDs, from five independent variables representing biomechanical risk factors. The neural network obtained has been implemented in a software application which focuses on risk analysis and prevention of the injuries caused by tasks involving manual lifting in the industrial environment. Relevance to industry The approach described in this paper allows neural networks to be developed for the prediction of musculoskeletal disorders in a way that is faster and easier than with previous procedures. It can also be applied to risk prediction in other areas of ergonomics. The neural network obtained can be used by the ergonomist as a diagnostic system, enabling jobs to be classified into two categories (low-risk and high-risk) according to the associated likelihood of causing low back disorders. This system provides a higher proportion of correct classifications than other previous models., We would like to thank the Universidad Politécnica de Valencia for its assistance to carry out this research through its Support Programme for Research and Development and its Funding Projects PAID-06-09/2902 and PAID-05-09/4215.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of a nodal collocation approximation for the multidimensional P-L equations to the 3D Takeda benchmark problems

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
PL equations are classical approximations to the neutron transport equations, which are obtained expanding the angular neutron flux in terms of spherical harmonics. These approximations are useful to study the behavior of reactor cores with complex fuel assemblies, for the homogenization of nuclear cross-sections, etc., and most of these applications are in three-dimensional (3D) geometries. In this work, we review the multi-dimensional PL equations and describe a nodal collocation method for the spatial discretization of these equations for arbitrary odd order L, which is based on the expansion of the spatial dependence of the fields in terms of orthonormal Legendre polynomials. The performance of the nodal collocation method is studied by means of obtaining the keff and the stationary power distribution of several 3D benchmark problems. The solutions are obtained are compared with a finite element method and a Monte Carlo method., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under Project ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universidad Politecnica de Valencia under Project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hygrothermal ageing of reprocessed polylactide

  • Badia, J.D.
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of an accelerated hygrothermal ageing simulation test on a commercial PLA and its three subsequent mechanically-reprocessed materials was studied. The analysis was focused on the water diffusion kinetics and the physico-chemical changes induced by the hygrothermal degradation. Water diffusion proceeded faster than chain relaxation processes, as defined by a Case II absorption model. It was proved that the water diffusion rate decreased with subsequent reprocessing cycles and increased with higher hygrothermal ageing temperatures. Hydrolytic chain scission provoked significant molar mass decays and consequent general losses of thermal and mechanical performance. The rearrangement into crystalline fractions of shorter chains provoked by hygrothermal ageing was qualitatively and quantitatively followed by both Fourier-Transform Infrared Spectroscopy and Differential Scanning Calorimetry. The microstructural changes were monitored by the cold-crystallization temperature, the crystallinity degree XC and the absorbance intensity ratio I921/I955. A Weibull model showed that the crystallites were formed faster at higher reprocessing cycles and at lower hygrothermal ageing temperatures. All these effects were particularly significant for PLA reprocessed more than one time., B.Sc. Oscar Gil-Castell is acknowledged for his dedication in the lab and his outstanding attitude towards learning. The authors thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2011-28735-C02-01 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of the FPI pre-doctoral grant to L. Santonja-Blasco and FPU pre-doctoral grants to A. Martinez-Felipe and J.D. Badía. The financial support of the Generalitat Valenciana, through the Grisolia (A. Martinez-Felipe) and Forteza (J.D. Badia) programs and the ACOMP/2011/189. UPV is thanked for additional support through the PAID 05-09-4331 program and the PAID 04-11 for the allowance conceded to attend to the III International Conference on Biodegradable and Biobased Polymers (BIOPOL2011) in Strasbourg.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Variable Selection for Multifactorial Genomic Data

  • Tarazona, Sonia|||0000-0001-5346-1407
  • Ferrer, Alberto|||0000-0001-7244-5947
  • PRADO-LÓPEZ, Sonia
  • Dopazo, Joaquín
  • CONESA, A.
[EN] Dimension reduction techniques are used to explore genomic data. Due to the large number of variables (genes) included in this kind of studies, variable selection methods are needed to identify the most responsive genes in order to get a better interpretation of the results or to conduct more specific experiments. These methods should be consistent with the amount of signal in the data. For this purpose, we introduce a novel selection strategy called minAS and also adapt other existing strategies, such us Gamma approximation, resampling techniques, etc. All of them are based on studying the distribution of statistics measuring the importance of the variables in the model. These strategies have been applied to the ASCA-genes analysis framework and more generally to dimension reduction techniques as PCA. The performance of the different strategies was evaluated using simulated data. The best performing methods were then applied on an experimental dataset containing the transcriptomic profiles of human embryonic stem cells cultured under different oxygen concentrations. The ability of the methods to extract relevant biological information from the data is discussed, This work was partially funded by Spanish Ministry of Science and Innovation [grants BIO2008-05266-E and DPI2008-06880-C03-03/DPI] and by Universidad Politecnica de Valencia [UPV-PAID 05-09]. The English revision of this paper was funded by the Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Structure Formation in Side-Chain Liquid Crystal Copolymers by Variable Temperature Fourier Transform Infrared Spectroscopy

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The formation of smectic phases in side-chain liquid crystal copolymers, SCLCPs, containing sulfonic acid-based nonmesogenic units, has been investigated using variable temperature FT-IR microscopy. Two copolymers have been characterized, namely, the poly[10-(4-methoxy-4′-oxy-azobenzene) decyl methacrylate]−copoly[2-acrylamido-2-methyl-1- propanesulfonic acid]s, the X-MeOAzB/AMPS copolymers, containing X = 0.71 and 0.56 mol fraction of mesogenic sidechains, respectively. For comparative purposes the corresponding side chain liquid crystal homopolymer, poly[10-(4-methoxy-4′- oxy-azobenzene) decyl methacrylate], MeOAzB, has also been characterized. The 0.56-MeOAzB/AMPS copolymer exhibits a bilayer smectic A phase, in which the mesogenic side chains constitute one layer with a SmA1 packing arrangement and the sulfonic acid groups another; whereas in the smectic A phase shown by the 0.71-MeOAzB/AMPS copolymer, the acid groups are located within the smectic layers giving a partially interdigated SmAd phase and reducing side chain packing efficiency. Smectic stabilization is attributed to a combination of stronger interactions involving the ester groups, as reflected in changes to the C O stretching band at ν ∼ 1730 cm−1 , and hydrogen bonding between the amide groups within the acid-based layers, as inferred by changes to the NH stretching band at ν ∼ 3320 cm−1 . The temperature response observed for groups with different chemical environments permits the mapping of the short-range interactions between the various structural components in SCLCPs with a view to controlling the functionality of the materials., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors also thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia (GRISOLIAP/2010/057, GRISOLIAP/2012/056, GRISOLIAP/2013/A/036) and Forteza programs and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uncertainty and Sensitive Analysis of Environmental Model for Risk Assessments: An Industrial Case Study

  • García-Díaz, J. Carlos|||0000-0002-5559-7110
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
The objectives of this paper are the application of uncertainty and sensitivity analysis methods in atmospheric dispersion modeling to study the prediction of the dispersion of pollutants in the atmosphere. The Gaussian Plume Model is used to study the impact of meteorology on the dispersion of the emissions from an industrial source complex. The determination of ground-level concentration and maximum ground-level concentration is useful for the prediction of violations of air quality regulations. The Industrial Source Complex Short-Term (ISCST-3) air pollution model was adopted to predict the ground-level concentration of sulfur dioxide (SO2) emitted by a power plant located in an industrial region site in Spain. Quantitative uncertainty analysis has become a common component of risk assessments. Uncertainties were defined a priori for each of the following variables: wind speed, wind direction, and pollutant emission rate. In order to obtain information about the uncertainty of computer code results, a number of code runs was performed using the nonparametric tolerance limits method. The Monte Carlo method was used to propagate uncertainty across codes. The Spearman rank correlation coefficient was used as a sensitivity measure., The authors gratefully acknowledge the financial support of Universidad Politecnica de Valencia (PAID-05-09-4275).