Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study of the impact of water properties on radon measurement by liquid scintillation counting using a factorial design

  • Trull-Hernandis, Cristina|||0000-0002-4182-6808
  • Martínez-Gómez, Mónica|||0000-0003-2401-9403
  • Sancho, M.|||0000-0002-9566-1949
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This study employs a factorial experimental design to assess the influence of water physicochemical parameters on radon concentration measurements by liquid scintillation counting (LSC). Four water quality parameters are selected for this purpose to evaluate their potential effects ¿ and their potential interactions ¿ on the two-phase direct LSC method of radon in water measurement. The factors considered are pH, electrical conductivity (EC), turbidity and total organic carbon (TOC). The results assess how variations in these parameters significantly affect radon measurements. Since the performed variations do not have a significant effect, measurements under the conditions of real aqueous scenarios directly represent actual radon concentrations in water; and no correction factor is required., This work has been funded by the following Universitat Politècnica de Valencia projects: two entitled Estudio de la Transferencia de Radón a Traves de Distintos Medios (Suelo, Agua y Aire). Aplicacion para la Protección de la Población y de Profesionales Expuestos , with references (PAID-11-23)-UPV and (PAID-11-24)-UPV, and a third project entitled Estudio de la transferencia de radon del agua al aire en diferentes condiciones fisicoquímicas para la prediccióde la concentración en aire en espacios cerrados , referenced as (PAID-01-21)-UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Techno-economic evaluation of hydrogen refuelling station with on-site electrolysis production powered by photovoltaic solar energy for the railway sector

  • Mahmood, Muhammad Atif
  • Pérez de la Calle, Patricia
  • Meneses Zuluaga, Juan Manuel
  • Massarotti, Nicola
  • Sánchez-Diaz, Carlos|||0000-0003-0913-725X
[EN] Employing hydrogen-fueled vehicles is a promising solution to decarbonize transport and power sectors by 2050. The study undertook a comprehensive techno-economic assessment of an on-site solar electricity-driven hydrogen refuelling station (HRS) providing a daily 160.68 kg of green hydrogen fuel to a Spanish railway tram. Different case scenarios of HRS facilities addressing the final hydrogen cost after producing, compressing, storing, and dispensing are examined and compared. Each case configuration differs in terms of operating strategy, mix of energy sources, financial structure, capacity sizing, and economic benefits. A complete station components sizing approach is introduced demonstrating installing a 2.8 MWp solar plant and 0.515 MW PEM electrolyzer. The economic results of base case configuration revealed that for producing 879,723 kgH2 during a project life of 15 years, a capital investment of 4.08 M€ along with total expenses of 6.59 M€ required allowing to achieve an H2 cost of 7.49 €/kg which can remarkably reduce to 2.27 €/kg by considering excess energy sale revenue. Ultimately, the present research offers an adequate designing and sizing approach for renewable energy-fed stations for advancing railway energy infrastructure by executing techno-economical investigations. These findings help achieve carbon-neutral transportation and guide industry stakeholders, researchers, and governments to develop cutting-edge HRS systems cost-effectively., This work has been funded by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-23)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The road to national competitiveness is paved with innovation and entrepreneurship: a qualitative comparative analysis

  • López-Rubio, Pedro
  • Mas-Tur, Alicia
  • Chaparro-Banegas, Nuria|||0000-0002-5907-5643
  • Roig-Tierno, Norat|||0000-0002-7980-3548
[EN] In the twenty-first century, competitiveness has become a pillar of sustainable development strategies around the world. Numerous international organizations and academics cite innovation and entrepreneurship as determinants of competitiveness. By incorporating innovation and entrepreneurship into the economy and society, countries have been able to implement policies to boost national competitiveness. However, not all countries have been equally successful because each country has its own unique characteristics that apply only within its national borders. An innovation system refers to the innovation institutions, actors, and infrastructures that shape innovation activities within national or regional boundaries. This article identifies the configurations of conditions that lead to high and low levels of national competitiveness. This paper presents the results of fuzzy-set qualitative comparative analysis (fsQCA) with six causal conditions. The results reveal six combinations of factors that increase national competitiveness. R&D, innovation, entrepreneurship support policies, and GDP per capita are crucial elements. In contrast, developed entrepreneurship does not guarantee competitiveness achievement if a country possesses poor R&D and institutional infrastructures. The implications of this study can help resource allocation by supporting the design and implementation of effective innovation and entrepreneurship policies., This work was supported by the Vice-rectorate for Research of the Universitat Politecnica de Valencia (PAID-11-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Laboratory-scale setup for radon transport monitoring in radionuclide-rich soils: Key points identification and protocols development

  • Trull-Hernandis, Cristina|||0000-0002-4182-6808
  • Moreno-Ramón, Héctor|||0000-0002-4080-0876
  • Sancho, M.|||0000-0002-9566-1949
  • Lidón, Antonio|||0000-0002-0455-4348
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
[EN] A laboratory-scale experimental setup has been developed to simulate radon transport from radionuclide-rich soils under dynamic conditions. The setup allows simultaneous monitoring of the mobility of radon gas by leaching and by exhaling into the air phase under varying soil moisture conditions. Given that radon is a radioactive gas classified as Group 1 human carcinogen and stands as the 2nd reason for lung cancer worldwide, understanding its release and transport mechanisms in any environment is essential for effective radiological risk assessment. This work highlights the key aspects that must be considered and controlled to ensure a reproducible and stable experimental design that emulates the configuration of scenarios such as phosphate waste ponds and zones where radioactive content is distributed throughout the terrain. The identification of critical operational parameters provides a robust framework on what to consider when addressing the radon transport characterization and, later, be able to investigate the influence that environmental and the soil conditions have over radon release mechanisms., This work has been funded by two Universitat Politècnica de València projects, both entitled Estudio de la Transferencia de Radón a Través de Distintos Medios (Suelo, Agua y Aire). Aplicación para la Protección de la Población y de Profesionales Expuestos , with references (PAID-11-23)-UPV and (PAID-11-24)-UPV, and a third project entitled Estudio de la transferencia de radón del agua al aire en diferentes condiciones fisicoquímicas para la predicción de la concentración en aire en espacios cerrados , referenced as (PAID-01-21)-UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Complexity management challenges in the industry 4.0 era: A systematic review in production systems

  • Herrera-Vidal, Germán
  • Coronado-Hernandez, Jairo R.
  • Maheut, Julien|||0000-0002-5796-9053
[EN] Operational complexity in production systems has grown significantly with the adoption of Industry 4.0 technologies. Managing it is a strategic challenge that conditions industrial efficiency, adaptability, and sustain-ability. This research aims to analyze how these technologies impact the management of complexity in manufacturing environments. Methodologically, a systematic literature review was conducted using the PRISMA protocol, filtering 61,360 publications to select 27 key studies. The findings indicate that IoT, AI and CPS optimize decision-making and personalization but also introduce new layers of technical, organizational, and human complexity. In particular, a critical lack of standardized metrics for measuring and managing complexity was identified. Furthermore, a weak connection to the emerging principles of Industry 5.0, centered on human-technology collaboration, is evident. Consequently, a classification of complexity factors (internal, external, static, and dynamic) is proposed, and future lines of research oriented towards the development of adaptive human-centered frameworks and sustainability are suggested., This research is not funded by any organization or institute. This work was supported by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia (PAID-11-23) , through the project entitled: Diversity management in personal skills in task assignment in highly competitive productive environments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ti3C2Tx Electromagnetic Shielding Performance: Investigating Environmental Influences and Structural Changes

  • Barjola-Ruiz, Arturo
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Herráiz, Roberto
  • Amaro, Andrea
  • Torres, Jose
  • Suárez, Adrian
[EN] MXenes, a promising family of 2D transition metal carbides/nitrides, are renowned for their exceptional electronic conductivity and mechanical stability, establishing them as highly desirable candidates for advanced electromagnetic interference (EMI) shielding material. Despite these advantages, challenges persist in optimizing MXene synthesis methods and improving their oxidation resistance. Surface defects on MXenes significantly impact their electronic properties, impeding charge transport and catalyzing the oxidation process. In this study, a novel synthesis protocol derived from the conventional, minimally invasive layer delamination (MILD) method, is presented. Two additional steps are introduced aiming at enhancing process yield, addressing a crucial issue as conventional methods often yield high-quality individual MXene flakes but struggle to generate sufficient quantities for bulk material production. This approach successfully yields Ti3C2Tx films with excellent conductivity (3973.72 +/- 121.31 Scm(-1)) and an average EMI shielding effectiveness (SE) of 56.09 +/- 1.60 dB within the 1.5 to 10 GHz frequency range at 35% relative humidity (RH). Furthermore, this investigation delves into the long-term oxidation stability of these films under varying RH conditions. These findings underscore the effectiveness of this innovative synthesis approach in elevating both the conductivity and EMI shielding capabilities of MXene materials. This advancement represents a significant step toward harnessing MXenes for practical applications requiring robust EMI shielding solutions. Additionally, insights into long-term stability offer critical considerations for implementing MXenes in real-world environments., This study forms part of the Advanced Materials Program and has been supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/060). The authors extend sincere appreciation to the Vice-rectorate for Research of the Universitat Politecnica de Valencia for their financial support under the grant (PAID-11-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Proyecto fin de carrera (BachelorThesis)

Control digital de la gestión de energía de un sistema hibrido pila de combustible-batería, Digital control of the energy management in a fuel cell-battery hybrid system, Control digital de la gestió de l&apos, energía d&apos, un sistema hibrid pila de combustible-batería

  • Cobelas Engel, Camilo Luca
[ES] Aproximadamente el 25% de las emisiones globales de CO2 son generadas por motores de combustión utilizados en el transporte de personas y mercancías. Dado que los combustibles fósiles tienen una disponibilidad limitada, es inevitable que surjan nuevas tecnologías para alimentar la movilidad. Sin embargo, los sistemas exclusivamente eléctricos enfrentan desafíos significativos, como la necesidad de baterías de gran tamaño y alto impacto ambiental. En este contexto, los sistemas híbridos, que combinan varias tecnologías, se perfilan como la solución más prometedora. Estos sistemas permiten maximizar las ventajas de cada tecnología individual, optimizando el rendimiento y la eficiencia. El campo de los sistemas híbridos está en constante desarrollo y tiene un futuro prometedor debido a su capacidad para integrar y mejorar diferentes fuentes de energía. Además, los drones están revolucionando diversos sectores, destacándose como un área de investigación en pleno auge. La implementación de sistemas de alimentación híbridos en drones esta llamada a impulsar estas tecnologías. El presente trabajo de fin de grado (TFG) está en el marco de un proyecto de investigación. Este proyecto está centrado en la implementación de un sistema híbrido compuesto por una batería electroquímica y una pila de combustible alimentada con hidrógeno. El sistema está pensado para otorgar la energía necesaria al sistema de propulsión de un dron, otorgándole mayor autonomía y capacidad de carga frente a otros sistemas convencionales. Al fusionar ambos sistemas de alimentación, surge la necesidad de diseñar un sistema de control digital que gobierne el funcionamiento del sistema híbrido. De un lado debe controlar el balance de planta de la pila de combustible y por otro debe actuar sobre la etapa de potencia que recarga la batería en vuelo. En el actual TFG se hace una contextualización del proyecto, se identifican las necesidades de hardware y software, se seleccionan los componentes que formaran el hardware y se diseña la arquitectura del software. Para realizar estos pasos, se modela el comportamiento del sistema con la definición de una máquina de estados finitos. La creación de un control digital como el propuesto por el equipo de investigación H2Drone conlleva la necesidad de desarrollar herramientas que permitan el análisis del comportamiento del sistema híbrido. Se ha desarrollado y validado un sistema de adquisición de señales que permite observar el comportamiento del sistema en tiempo real en un ordenador portátil., [EN] Approximately 25% of global CO2 emissions are generated by combustion engines used in the transportation of people and goods. Given that fossil fuels have limited availability, the emergence of new technologies to power mobility is inevitable. However, exclusively electric systems face significant challenges, such as the need for large batteries with high environmental impact. In this context, hybrid systems, which combine various technologies, appear to be the most promising solution. These systems allow for maximizing the advantages of each individual technology, optimizing performance and efficiency. The field of hybrid systems is constantly evolving and has a promising future due to its capacity to integrate and enhance different energy sources. Additionally, drones are revolutionizing various sectors, standing out as a booming area of research. The implementation of hybrid power systems in drones is expected to drive these technologies forward. This bachelor's thesis (TFG) is part of a research project focused on implementing a hybrid system composed of an electrochemical battery and a hydrogen-powered fuel cell. The system is designed to provide the necessary energy to a drone's propulsion system, granting it greater autonomy and load capacity compared to other conventional systems. By merging both power systems, there arises a need to design a digital control system that governs the operation of the hybrid system. On one hand, it must control the fuel cell's balance of plant, and on the other, it must manage the power stage that recharges the battery in flight. This TFG contextualizes the project, identifies the hardware and software needs, selects the components that will form the hardware, and designs the software architecture. To achieve these steps, the system's behavior is modeled with the definition of a finite state machine. The creation of a digital control system as proposed by the H2Drone research team requires the development of tools that allow for the analysis of the hybrid system's behavior. A signal acquisition system has been developed and validated, enabling real-time observation of the system's behavior on a laptop., [CA] Aproximadament el 25% de les emissions globals de CO2 són generades per motors de combustió utilitzats en el transport de persones i mercaderies. Atés que els combustibles fòssils tenen una disponibilitat limitada, és inevitable que sorgisquen noves tecnologies per a alimentar la mobilitat. No obstant això, els sistemes exclusivament elèctrics enfronten desafiaments significatius, com la necessitat de bateries de gran tamany i alt impacte ambiental. En aquest context, els sistemes híbrids, que combinen diverses tecnologies, es perfilen com la solució més prometedora. Aquests sistemes permeten maximitzar els avantatges de cada tecnologia individual, optimitzant el rendiment i l’eficiència. El camp dels sistemes híbrids està en constant desenvolupament i té un futur prometedor a causa de la seua capacitat per a integrar i millorar diferents fonts d’energia. A més, els drons estan revolucionant diversos sectors, destacant-se com una àrea d’investigació en ple auge. La implementació de sistemes d’alimentació híbrids en drons està cridada a impulsar aquestes tecnologies. El present treball de fi de grau (TFG) està en el marc d’un projecte d’investigació. Aquest projecte està centrat en la implementació d’un sistema híbrid compost per una bateria electroquímica i una pila de combustible alimentada amb hidrogen. El sistema està pensat per a atorgar l’energia necessària al sistema de propulsió d’un dron, atorgant-li major autonomia i capacitat de càrrega enfront d’altres sistemes convencionals. En fusionar ambdós sistemes d’alimentació, sorgix la necessitat de dissenyar un sistema de control digital que governe el funcionament del sistema híbrid. D’una banda ha de controlar el balanç de planta de la pila de combustible i d’altra banda ha d’actuar sobre l’etapa de potència que recarrega la bateria en vol. En l’actual TFG es fa una contextualització del projecte, s’identifiquen les necessitats de hardware i software, es seleccionen els components que formaran el hardware i es dissenya l’arquitectura del software. Per a realitzar aquests passos, es modela el comportament del sistema amb la definició d’una màquina d’estats finits. La creació d’un control digital com el proposat per l’equip d’investigació H2Drone comporta la necessitat de desenvolupar eines que permeten l’anàlisi del comportament del sistema híbrid. S’ha desenvolupat i validat un sistema d’adquisició de senyals que permet observar el comportament del sistema en temps real en un ordinador portàtil.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bridging the perception-reality gap in manufacturing complexity: A dual-perspective configurator for digital transformation

  • Herrera-Vidal, Germán
  • Coronado-Hernandez, Jairo R.
  • Maheut, Julien|||0000-0002-5796-9053
[EN] Digital transformation amplifies manufacturing complexity, yet managers systematically misperceive its magnitude, a perception-reality gap that undermines strategic responsiveness. Existing diagnostic tools measure either subjective perception or objective structure, never both simultaneously, preventing organizations from identifying dangerous cognitive-operational misalignments during technology adoption. This study develops and validates a dual-perspective configurator integrating entropy-based objective metrics (static (Cs) and dynamic (Cd) entropic complexity across 40 managerial variables) with psychometric scales capturing cognitive load, using data from 18 manufacturing companies from six industrial sectors in Cartagena (Colombia) across discrete and process industries spanning small, medium, and large enterprise categories. Advanced statistical analyses, including hierarchical ANOVA, mixed-effects modeling, and psychometric validation, were conducted using Python. Results reveal a paradoxical size-dependent divergence. Large firms exhibit high objective complexity yet low perceived complexity, suggesting organizational routines and technological familiarity mask underlying systemic disorder. Conversely, medium-sized enterprises demonstrate strong perception-reality alignment, indicating transparent operational visibility, while small firms show moderate concordance with lower absolute complexity levels. Firm size and stage emerged as primary determinants with negligible sectoral effects. The configurator demonstrated excellent reliability, validating complexity as a systemically interdependent construct. The dual-entropy framework enables early detection of cognitive-operational mismatches invisible through conventional strategic planning, transforming abstract complexity discourse into actionable diagnostic intelligence for managing the perception-reality gap during Industry 4.0 transitions., This research is not funded by any organization or institute. This work was supported by the Vice-Rectorate for Research of the Universitat Polite cnica de Valencia (PAID-11-23) , through the project entitled: Diversity management in personal skills in task assignment in highly competitive productive environments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control synthesis of nonholonomic mobile robots under time-varying delays and input saturation: experimental validation.

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Carbonell-Lázaro, Rafael|||0000-0002-2573-5041
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
[EN] This paper presents a new control synthesis methodology for nonholonomic mobile robots subjected to time-varying delays and input saturation constraints. The proposed control method is based on smooth static nonlinear functions, leading to a simpler structure than other available control strategies for this class of systems. In addition, the convergence to a certain target position with guaranteed exponential decay rate can be proved for any orientation error. To this end, a nonlinear Lyapunov-Krasovskii functional has specifically been designed to deal with the inherent discontinuity of the kinematics model as well as the presence of time-varying delays. Thus, the control design can efficiently be addressed by means of Linear Matrix Inequalities (LMIs). Finally, the effectiveness of the proposed control design algorithm is validated through simulation and experimentally using a two-wheeled mobile robot., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grant PID2020-116585GB-I00 and Grant PRE2019-088467, in part by ESF Investing in Your Future, and in part by Vicerrectorado de Investigación de la Universitat Politècnica de València under Grant PAID-11-23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ionic conductivity of vanadium-doped tin disulfide for photovoltaic applications

  • Ullah, Shafi
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Marí, B.|||0000-0003-0001-419X
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Ullah, Hanif
  • Andrio, Andreu
[EN] Tin disulfide (SnS2) is an environmentally friendly and widely available material with a band gap ranging from approximately 2.20 to 2.45 eV, making it a strong candidate for use as a buffer layer in photovoltaic technologies. In this study, SnS2 was synthesized using the hydrothermal method. To enhance its interaction with visible light, vanadium (V) atoms-also earth-abundant and characterized by a low band gap-were incorporated into the SnS2 matrix. The atomic percentage of vanadium was varied from 0% to 10% in increments of 2%. A previous study conducted on similar mixed Sn1-xVxS2 samples, though with different vanadium concentrations, suggested that V-doped SnS2 thin films could be suitable as buffer layers for solar cell fabrication. However, the electrical conductivity of these samples had not been quantified, and therefore, such a conclusion cannot be definitively confirmed. In this work, electrochemical impedance spectroscopy was used to determine the conductivity and diffusivity of vanadium-doped samples as a function of temperature. Our results revealed a percolation threshold at approximately 6% vanadium content, with notable changes in conductivity observed around 120 degrees C. The sample doped with 6% vanadium exhibited a significantly enhanced photocurrent response (3.0 x 10-6 A cm-2) compared to the undoped SnS2 thin films (4.0 x 10-7 A cm-2). These findings indicate that vanadium incorporation significantly alters the crystallinity of SnS2, leading to changes in the melting temperature of the mixed Sn1-xVxS2 samples. Such changes may induce structural relaxation, lattice dilation, or enhanced atomic interactions. Together with previous studies, these results highlight that V-doped SnS2 is a promising candidate for optoelectronic applications, including photoelectrochemical catalysis, photodetectors, and photovoltaic devices., This work was funded by Generalitat Valenciana through program PROMETEUS, grant CIPROM/2022/03. AG-B thanks the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia, Spain for the financing of the Project (PAID-11-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Natural language processing of social network data for the evaluation of agricultural and rural policies

  • Gutiérrez Domínguez, Alba
  • Roig-Tierno, Norat|||0000-0002-7980-3548
  • Chaparro-Banegas, Nuria|||0000-0002-5907-5643
  • García Alvarez-Coque, José María|||0000-0002-4334-7843
[EN] Global sustainable development challenges affect the agricultural sector, and many innovations aimed at addressing these challenges have been introduced in the agri-food sector. In this complex context, new agricultural policies are being implemented in Europe. Their success depends on their potential to adapt to new realities, responding to the opinions and demands of the European population. Given the rapid rise of social media as an important part of people's daily lives, public administrations have introduced digitalization and communication strategies through social media sites. Social media can provide policymakers with large amounts of data on user opinions. Given the value of social media as a rich source of data on public views and opinions, the aim of this paper is twofold: (i) to use natural language processing (NLP) to identify the events that have led to negative or positive opinion about European Common Agricultural Policy (CAP) reform and (ii) to evaluate the ability of NLP to study users' opinions on Twitter/X. The findings show that issues such as Brexit, the European Green Deal, the role of CAP in the environment, livestock farming, food safety, and illegal practices and corruption in the distribution of CAP funds have crucial implications for the design and application of the new CAP. Moreover, the study also suggests that NLP techniques can provide opportunities to integrate agricultural policies and instruments in the agri-food sector by assessing society's opinions. Sentiment analysis, even considering its limitations, could support sound and inclusive policymaking approaches anticipating public opinion in cases of risk of social unrest., This work was supported by the Vice-rectorate for Research of the Universitat Politecnica de Valencia (PAID-11-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Beyond Paterson-Stockmeyer: Advancing Matrix Polynomial Computation

  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Defez Candel, Emilio|||0000-0002-3303-6371
[EN] Since 1973, the Paterson¿Stockmeyer method has been considered the most efficient approach for evaluating general matrix polynomials. In this paper, we challenge this long-standing belief by demonstrating that newly developed methods surpass its efficiency. We summarize the state of the art and present new results. Additionally, for decades, rational approximations have been deemed superior to polynomial approximations in terms of computational efficiency. However, we reveal that polynomial approximations can achieve a higher order of accuracy than state-of-the-art rational methods at the same computational cost. Through theoretical insights and practical examples, we illustrate the implications of these findings for advanced matrix computations, with potential applications in scientific computing, numerical analysis, and artificial intelligence., This work was supported by the Generalitat Valenciana Grant CIAICO/2023/275 and the Vicerrectorado de Investigación de la Universitat Politècnica de València Grant PAID-11-23
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Economic efficiency of drip and flood irrigation. Comparative analysis at farm scale using DEA

  • García Molla, Marta|||0000-0002-3360-5669
  • Puertas, Rosa|||0000-0003-4937-4575
  • Vega Carrero, Virginia
  • Sanchis Ibor, Carles|||0000-0002-8795-2922
[EN] In recent decades, there has been a massive replacement of flood irrigation with drip irrigation throughout the world. Numerous studies have been published on the efficiency of these techniques in terms of water savings, but few works have paid attention to their economic efficiency at farm scale. In this research, a two-stage methodology has been used for this purpose, developed in three irrigated areas of the region of Valencia (Eastern Spain). In the first stage, interviews were conducted with experts from irrigation communities and cooperatives, and in the second stage, an efficiency analysis was carried out using Data Envelopment Analysis (DEA). It is concluded that, although the cultivation costs of drip irrigation are lower and the technology gap (TGRK) is smaller than flood irrigation, there is much room for improvement. Policies to promote the installation of localised irrigation should include complementary measures to ensure the viability of modernised farms., This work has been carried out in the framework of the IrriGo project funded by the Spanish State Research Agency PID2023-148676OB-C21 and by the PAID-11-23 of the Vice-Rectorate for Research of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Flexible piezoelectric nanogenerator based on Ti3C2Tx-coated electrospun PVDF-TrFE nanofibers

  • Barjola-Ruiz, Arturo
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] This study presents the development of a flexible piezoelectric nanogenerator based on electrospun PVDF-TrFE nanofibers coated with Ti3C2Tx MXene. The device is designed to harvest ambient mechanical energy for self-sustaining systems, addressing the limitations of conventional piezoelectric materials. We report the synthesis of Ti3C2Tx MXene, a novel 2D nanomaterial known for its high electrical conductivity and abundant surface terminations, which facilitate hydrogen bonding interactions with the dipoles of PVDF-TrFE molecular chains. The Ti3C2Tx MXene nanosheets were synthesized and deposited as a thin layer onto PVDF-TrFE nanofiber mats via a vacuum-assisted filtration method. This coating enhances the net dipole moment around the MXene surface, predominantly aligning it along the z-axis. The electrospinning process was optimized to produce uniform PVDF-TrFE nanofibers with a high beta-phase content, which is crucial for enhanced piezoelectric performance. The MXene coating significantly improved the electrical properties of the nanofibers, resulting in a nanogenerator with an output voltage 20 times higher than that to pure PVDF-TrFE. This innovative composite demonstrates great potential for applications in self-powered wearable and portable devices., We gratefully acknowledge to the Vice-rectorate for Research of the Universitat Politecnica de Valencia for their financial support under the grant (PAID-11-23).