Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polynomial characteristic sets for DFA identification

  • García Gómez, Pedro
  • López Rodríguez, Damián|||0000-0003-3633-3862
  • Vázquez-de-Parga Andrade, Manuel
[EN] We study the order in Grammatical Inference algorithms, and its influence on the polynomial (with respect to the data) identification of languages. This work is motivated by recent results on the polynomial convergence of data-driven grammatical inference algorithms. In this paper, we prove a sufficient condition that assures the existence of a characteristic sample whose size is polynomial with respect to the minimum DFA of the target language. © 2012 Elsevier B.V. All rights reserved., Work partially supported by the Spanish Ministerio de Economia y Competitividad under research project TIN2011-28260-C03-01 and Universidad Politecnica de Valencia grant PAID-2019-06-2011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Regular languages and partial commutations

  • Cano Gómez, Antonio
  • Guaiana, Giovanna
  • Pin, Jean-Eric
[EN] The closure of a regular language under a [partial] commutation I has been extensively studied. We present new advances on two problems of this area: (1) When is the closure of a regular language under [partial] commutation still regular? (2) Are there any robust classes of languages closed under [partial] commutation? We show that the class Pol(G) of polynomials of group languages is closed under commutation, and under partial commutation when the complement of I in A2 is a transitive relation. We also give a su¿cient graph theoretic condition on I to ensure that the closure of a language of Pol(G) under I-commutation is regular. We exhibit a very robust class of languages W which is closed under commutation. This class contains Pol(G), is decidable and can be de¿ned as the largest positive variety of languages not containing (ab)¿. It is also closed under intersection, union, shu¿e, concatenation, quotients, length-decreasing morphisms and inverses of morphisms. If I is transitive, we show that the closure of a language of W under I-commutation is regular. The proofs are nontrivial and combine several advanced techniques, including combinatorial Ramsey type arguments, algebraic properties of the syntactic monoid, ¿niteness conditions on semigroups and properties of insertion systems. © 2013 Elsevier Inc. All rights reserved, [ES] El cierre de un lenguaje regular bajo una conmutación [parcial] $I$ se ha estudiado extensivamente. Presentamos nuevos avances sobre los dos problemas de esta zona: (1) cuando es el cierre de un lenguaje regular bajo ¿conmutación [parcial] todavía regular? (2) Hay alguna clase robusta ¿de idiomas cerraron bajo conmutación [parcial]? Demostramos que la clase $\PolG$ de polinomios de grupo idiomas está cerrada bajo conmutación y bajo conmutación parcial cuando el complemento de $ $I en $A ^ 2$ es una relación transitiva. También damos un gráfico suficiente condición teórica en $ $I para asegurarse de que el cierre de un lenguaje de \PolG$ $ bajo $lo$-conmutación es regular. Exhibimos un muy robusto clase de idiomas $\cW$ que es cerrado bajo conmutación. Esta clase contiene \PolG$ $, es decidible y puede definirse como el más grande positiva variedad de idiomas que no contengan $(ab) ^ * $. También es cerrado bajo intersección, Unión, shuffle, concatenación, cocientes, longitud decreciente morfismos e inversas de morfismos. Si $ $I es transitivo, demostramos que el cierre de un lenguaje de $\cW$ bajo $Lo$-conmutación es regular. Las pruebas son no triviales y se combinan varias técnicas avanzadas, incluyendo el tipo de Ramsey combinatoria argumentos, propiedades algebraicas de la monoid sintáctica, finito condiciones sobre semigrupos y propiedades de los sistemas de inserción., The first author was supported by the project Automatas en dispositivos moviles: interfaces de usuario y realidad aumentada (PAID 2019-06-11) supported by Universidad Politecnica de Valencia. The third author was supported by the project ANR 2010 BLAN 0202 02 FREC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Contribution to a Circular Economy Model: From LignocellulosicWastes from the Extraction of Vegetable Oils to the Development of a New Composite

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Lerma-Cantó, Alejandro
[EN] The present works focuses on the development of a novel fully bio-based composite using a bio-based high-density polyethylene (Bio-HDPE) obtained from sugar cane as matrix and a by-product of extraction of chia seed oil (CO) as filler, with the objective of achieving a circular economy model. The research aims to revalorize an ever-increasing waste stream produced by the growing interest in vegetable oils. From the technical point of view, the chia seed flour (CSF) was chemically modified using a silane treatment. This treatment provides a better interfacial adhesion as was evidenced by the mechanical and thermal properties as well as field emission scanning electron microscopy (FESEM). The effect of silane treatment on water uptake and disintegration rate was also studied. On the other hand, in a second stage, an optimization of the percentage of treated CSF used as filler was carried out by a complete series of mechanical, thermal, morphological, colour, water absorption and disintegration tests with the aim to evaluate the new composite developed using chia by-products. It is noteworthy as the disintegration rate increased with the addition of CSF filler, which leads to obtain a partially biodegradable wood plastic composite (WPC) and therefore, becoming more environmentally friendly., I. D-C wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and Properties of Binary Blend from Bacterial Polyester Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(caprolactone) with Improved Toughness

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Verdu, Isabel
[EN] Polyhydroxyalkanoates (PHAs) represent a promising group of bacterial polyesters for new applications. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) is a very promising bacterial polyester with potential uses in the packaging industry; nevertheless, as with many (almost all) bacterial polyesters, PHBH undergoes secondary crystallization (aging) which leads to an embrittlement. To overcome or minimize this, in the present work a flexible petroleum-derived polyester, namely poly(e-caprolactone), was used to obtain PHBH/PCL blends with different compositions (from 0 to 40 PCL wt %) using extrusion followed by injection moulding. The thermal analysis of the binary blends was studied by means of differential scanning calorimetry (DSC) and thermogravimetry (TGA). Both TGA and DSC revealed immiscibility between PHBH and PCL. Mechanical dynamic thermal analysis (DMTA) allowed a precise determination of the glass transition temperatures (Tg) as a function of the blend composition. By means of field emission scanning electron microscopy (FESEM), an internal structure formed by two phases was observed, with a PHBH-rich matrix phase and a finely dispersed PCL-rich phase. These results confirmed the immiscibility between these two biopolymers. However, the mechanical properties obtained through tensile and Charpy tests, indicated that the addition of PCL to PHBH considerably improved toughness. PHBH/PCL blends containing 40 PCL wt % offered an impact resistance double that of neat PHBH. PCL addition also contributed to a decrease in brittleness and an improvement in toughness and some other ductile properties. As expected, an increase in ductile properties resulted in a decrease in some mechanical resistant properties, e.g., the modulus and the strength (in tensile and flexural conditions) decreased with increasing wt % PCL in PHBH/PCL blends., This research work was funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU), project numbers MAT2017-84909-C2-2-R. This work was supported by the POLISABIO program, grant number (2019-A02). Juan Ivorra-Martinez is the recipient of an FPI grant from Universitat Politècnica de València (PAID-2019-SP20190011). Luis Quiles-Carrillo wants to thank GVA for his FPI grant (ACIF/2016/182) and MECD for his FPU grant (FPU15/03812). Microscopy services at UPV are acknowledged for their help in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of the Properties of Plasticized Polylactic Acid with Maleinized Hemp Seed Oil and a Novel Maleinized Brazil Nut Seed Oil

  • Perez-Nakai, Aina
  • Lerma-Cantó, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] In this study, for the first time, Brazil nut seed oil was chemically modified with maleic anhydride to obtain maleinized Brazil nut seed oil (MBNO). The same process was developed to obtain maleinized hemp seed oil (MHO). The use of MBNO and MHO was studied as bio-based plasticizers by incorporating them with different contents ranging from 0 to 10 phr in a polylactic acid (PLA) matrix. By means of mechanical, thermal and thermomechanical characterization techniques, the properties of the different formulations were studied to evaluate the plasticizing effect of the MBNO and MHO. With the addition of both plasticizers, a significant increase in ductile properties was observed, reaching an increase in elongation at break of 643% with 7.5 phr MBNO and 771% with 10 phr MHO compared to neat PLA. In addition, it has been observed that the mechanical resistant properties do not decrease, since the oils enhance the crystallization of PLA by increasing the free volume between its chains and counteracting the effect. Finally, a disintegration test was carried out under thermophilic conditions at 58 degrees C for 27 days, demonstrating that the incorporation of MHO and MBNO does not significantly affect the biodegradability of neat PLA., I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233). J.M.F. thanks the postdoc contract (APOSTD/2019/122) Generalitat Valenciana (2019-2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual Plasticizer/Thermal Stabilizer Effect of Epoxidized Chia Seed Oil (Salvia hispanica L.) to Improve Ductility and Thermal Properties of Poly(Lactic Acid)

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The use of a new bio-based plasticizer derived from epoxidized chia seed oil (ECO) was applied in a poly(lactic acid) (PLA) matrix. ECO was used due to its high epoxy content (6.7%), which led to an improved chemical interaction with PLA. Melt extrusion was used to plasticize PLA with different ECO content in the 0-10 wt.% range. Mechanical, morphological, and thermal characterization was carried out to evaluate the effect of ECO percentage. Besides, disintegration and migration tests were studied to assess the future application in packaging industry. Ductile properties improve by 700% in elongation at break with 10 wt.% ECO content. Field emission scanning electron microscopy (FESEM) showed a phase separation with ECO content equal or higher than 7.5 wt.%. Thermal stabilization was improved 14 degrees C as ECO content increased. All plasticized PLA was disintegrated under composting conditions, not observing a delay up to 5 wt.% ECO. Migration tests pointed out a very low migration, less than 0.11 wt.%, which is to interest to the packaging industry., I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233). J.M.F. thanks the postdoc contract (APOSTD/2019/122) Generalitat Valenciana (2019-2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of Poly(lactide) Ductile Properties by Plasticization with Biobased Tartaric Acid Ester

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Moreno, Virginia
[EN] Diethyl l-tartrate (DET) is used as a biobased plasticizer for poly(lactide) (PLA) formulations with improved ductile properties without compromising biodegradation. Different weight percentages (wt.%) of DET in the 0¿50 wt.% range are added to PLA by melt compounding and subsequently processed by injection molding. The effect of wt.% DET on mechanical, thermal, thermo-mechanical, morphology, biodegradation, and crystallinity is studied. Addition of 20 wt.% DET leads to a noticeable increase in elongation at break up to values of 567%, which is quite an interesting result considering the extreme brittleness of PLA. These results are verified by field emission scanning electron microscopy (FESEM) images, where filament-like structures are observed, indicative of an effective plasticization. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) show that the glass transition temperature of PLA is drastically decreased down to values of 23 °C for the sample with the highest amount of DET (50 wt.%), thus increasing its ductility and processability. Fourier-transformed infrared spectroscopy (FTIR) spectra show that there exists chemical interactions between PLA and DET. Finally, the biodegradability analysis proves that the developed blends are fully biodegradable, achieving complete disintegration after 49 days. It is observed that DET enhanced the disintegration rate of PLA., This research was a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. The authors also thank Generalitat Valenciana-GVA, grant number AICO/2021/025 and CIGE/2021/094 for supporting this work. J.G.-C. wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J.I.-M. wants to thank FPU19/01759 grant funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. V.M. wants to thank Generalitat Valenciana - GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future, grant number CIAPOS/2021/67. Microscopy Services at UPV are also acknowledged by their help in collecting and analyzing images. Funding for open access charge: Universitat Politecnica de Valencia.