Skip to main content

ANALISIS MULTISECTORIAL DE LOS IMPACTOS DEL CAMBIO CLIMATICO Y DE USO DE SUELO SOBRE POLINIZADORES, BIODIVERSIDAD Y RENDIMIENTO DE LOS CULTIVOS

PCI2019-103621

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

A method for using monthly average temperatures in phenology models for grapevine (Vitis vinifera L.)

  • García-Tejera, Omar
  • Marcos-Matamoros, Raül
  • Basile, Boris
  • Mataffo, Alessandro
  • Scognamiglio, Pasquale
  • Prieto, Henar
  • Mancha, Luis
  • Cabral, Inés
  • Queiroz, Jorge
  • Valente, Joana
  • Alves, Fernando
  • Gonzalez-Reviriego, Nube
  • Hernandez-Barrera, Sara
  • Mata Sola, Mercè
  • Girona, Joan
In recent years, there have been increasing efforts to link phenology models with seasonal climate predictions in so-called Decision Support Systems (DSS) to tailor crop management strategies. However, temporal discrepancies between phenology models with temperature data gathered on a daily basis and seasonal forecasting systems providing predictability on monthly scales have limited their use. In this work, we present a novel methodology to use monthly average temperature data in phenology models. Briefly stated, we modelled the timing of the appearance of specific grapevine phenological phases using monthly average temperatures. To do so, we computed the cumulative thermal time (Sf) and the number of effective days per month (effd). The effd is the number of days in a month on which temperatures would be above the minimum value for development (Tb). The calculation of effd is obtained from a normal probability distribution function derived from historical weather records. We tested the methodology on four experimental plots located in different European countries with contrasting weather conditions and for four different grapevine cultivars. The root mean square deviation (RMSD) ranged from 4 to 7 days for all the phenological phases considered, at all the different sites, and for all the cultivars. Furthermore, the bias of observed vs predicted comparisons was not significantly different when using either monthly mean or daily temperature values to model phenology. This new methodology, therefore, provides an easy and robust way to incorporate monthly temperature data into grapevine phenology models., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-term almond yield response to deficit irrigation

  • Moldero, David
  • López-Bernal, Álvaro
  • Testi, Luca
  • Lorite, Ignacio J.
  • Fereres Castiel, Elías
  • Orgaz Rosua, Francisco
A substantial area of the new almond plantations in Spain is under irrigation but because of water scarcity, deficit irrigation (DI) strategies have to be adopted. This study assesses the long-term sustainability of different DI strategies over 6 years (2014–2019) on a mature almond [Prunus dulcis (Mill) D.A. Web] orchard in southern Spain. Four irrigation treatments were imposed: full irrigation (FI); two moderate DI, (SDIM) and (RDIM), where applied irrigation was 65% of FI but differed in the seasonal water distribution; and a severe DI, where applied irrigation was 35% of FI. The results emphasise the key role of soil water storage and the importance to consider crop evapotranspiration (ETC) as the principal driving variable of productivity instead of irrigation in many situations. Soil water partially buffered the irrigation reductions imposed, leading to no significant differences in yield performance between the two different moderate DI treatments. The water production functions (yield versus applied irrigation and yield versus ETC) did not show statistical differences when comparing the first (2014–2016) against that of the second triennia (2017–2019), suggesting the non-existence of exhaustion or adaptation phenomena that could jeopardize the longer term sustainability of DI strategies. Average annual ETC ranged from 580 mm in the RDIS treatment to a maximum value of 1300 mm, yielding between 1370 and 2750 kg ha−1 of nuts, and showed that water deficits caused yield losses ranging from 0.05 to 0.35 kg m−3 of irrigation water depending on the irrigation level., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities (MICINN), project AGL2015-66141-R, co-financed by the European Union FEDER Funds, project INNOVA-Clima (PR.AVA.AVA2019.051) funded by the European Regional Development Fund (FEDER) and project PCI2019-103621 by the MICINN. D.M. is a holder of a pre-doctoral fellowship funded by MICINN. ÁL-B was supported by a postdoctoral fellowship of the ‘Juan de la Cierva-Formación’ program (FJCI-2015-24109, Spanish Ministry of Economy and Competitiveness)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correction to: Long-term almond yield response to deficit irrigation

  • Moldero, David
  • López-Bernal, Álvaro
  • Testi, Luca
  • Lorite, Ignacio J.
  • Fereres Castiel, Elías
  • Orgaz Rosua, Francisco
A substantial area of the new almond plantations in Spain is under irrigation but because of water scarcity, deficit irrigation (DI) strategies have to be adopted. This study assesses the long-term sustainability of different DI strategies over 6 years (2014–2019) on a mature almond [Prunus dulcis (Mill) D.A. Web] orchard in southern Spain. Four irrigation treatments were imposed: full irrigation (FI); two moderate DI, (SDIM) and (RDIM), where applied irrigation was 65% of FI but differed in the seasonal water distribution; and a severe DI, where applied irrigation was 35% of FI. The results emphasise the key role of soil water storage and the importance to consider crop evapotranspiration (ETC) as the principal driving variable of productivity instead of irrigation in many situations. Soil water partially buffered the irrigation reductions imposed, leading to no significant differences in yield performance between the two different moderate DI treatments. The water production functions (yield versus applied irrigation and yield versus ETC) did not show statistical differences when comparing the first (2014–2016) against that of the second triennia (2017–2019), suggesting the non-existence of exhaustion or adaptation phenomena that could jeopardize the longer term sustainability of DI strategies. Average annual ETC ranged from 580 mm in the RDIS treatment to a maximum value of 1300 mm, yielding between 1370 and 2750 kg ha−1 of nuts, and showed that water deficits caused yield losses ranging from 0.05 to 0.35 kg m−3 of irrigation water depending on the irrigation level., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities (MICINN), project AGL2015-66141-R, co-financed by the European Union FEDER Funds, project INNOVA-Clima (PR.AVA.AVA2019.051) funded by the European Regional Development Fund (FEDER) and project PCI2019-103621 by the MICINN. D.M. is a holder of a pre-doctoral fellowship funded by MICINN. ÁL-B was supported by a postdoctoral fellowship of the ‘Juan de la Cierva-Formación’ program (FJCI-2015-24109, Spanish Ministry of Economy and Competitiveness)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ClimaSG: A weather generator for crop modelling and water requirements studies

  • Mairech, Hanene
  • López-Bernal, Álvaro
  • Testi, Luca
  • Villalobos, Francisco J.
A new stochastic weather generator, ClimaSG, is presented and evaluated under a wide range of climates. The model requires monthly means data as inputs to generate daily weather data. Validation tests revealed that ClimaSG performed well in capturing monthly rainfall variability but showed some limitations for generating extreme temperatures. Solar radiation, air humidity, and wind speed were reproduced acceptably. The weather generator was particularly accurate in predicting mean and extreme values of ET0, which indicates that ClimaSG may be used as the basis for calculating crop water requirements and for irrigation design and planning purposes. The suitability of synthetic weather series generated with ClimaSG for crop modelling applications was further assessed by running the model OliveCan for low density rainfed (LD) and super high density irrigated (SHD) olive orchards for several locations in Spain. Yield distributions simulated with synthetic weather rarely differed significantly from those obtained with actual weather data, although the coefficient of variation (CV) was usually underestimated. Considering its low input requirements and satisfactory performance, ClimaSG represents a promising source of weather data for different practical applications., This work was supported by Ministerio de Ciencia, Innovación y Universidades, Spain, through two projects [grant numbers PID2019–110575RB-I00 and PCI2019–103621], one of which into the framework of the MAPPY project (JPI-Climate ERA-NET, AXIS call), and the “María de Maeztu” program for centers and units of excellence in research and development [grant number CEX2019–000968-M]. In addition, part of the work was conducted under ERA-NET FACCE SURPLUS project OLIVE-MIRACLE [grant number 652615], co-funded by INIA, Spain. Álvaro López-Bernal was supported by a postdoctoral fellowship [grant number POSTDOC-21–00381] from Junta de Andalucía (Conserjería de Transformación Económica, Industria, Conocimiento y Universidades)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019–000968-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling the impacts of cover crop management strategies on the water use, carbon exchange and yield of olive orchards

  • López-Bernal, Álvaro
  • García-Tejera, Omar
  • Testi, Luca
  • Villalobos, Francisco J.
Cover crops have long been proposed as an alternative soil management for minimizing erosion rates in olive stands while providing additional ecosystem services. However, the trade-off between these benefits and the competition for water with the trees makes the definition of optimal management practices a challenging task in semiarid climates. This work presents an improved version of OliveCan, a process-based simulation model of olive orchards that now can simulate the main impacts of cover crops on the water and carbon balances of olive orchards. Albeit simple in its formulation, the new model components were developed to deal with different cover crop management strategies. Examples are presented for simulation runs of a traditional olive orchard in the conditions of southern Spain, evaluating the effects of different widths for the strip occupied by the cover crop (Fcc) and two contrasting mowing dates. Results revealed that high Fcc resulted in lower olive yields, but only when mowing was applied at the end of spring. In this regard, late mowing and high Fcc was associated with lower soil water content from spring to summer, coinciding with olive flowering and the earlier stages of fruit growth. Fcc was also negatively correlated with surface runoff irrespective of the mowing date. On the other hand, net ecosystem productivity (NEP) was substantially affected by both Fcc and mowing date. Further simulations under future climate scenarios comparing the same management alternatives are also presented, showing substantial yield reductions by the end of the century and minor or negligible changes in NEP and seasonal runoff., Project funding: This work was supported by “Consejería de Transformación Económica, Industria, Conocimiento y Universidades” (“Junta de Andalucía”, Spain) through a project cofunded by ERDF [grant number 27425]. In addition, part of the work was conducted under two projects funded by “Ministerio de Ciencia, Innovación y Universidades”, Spain, [grant numbers PID2019-110575RB-I00 and PCI2019-103621], one of which into the framework of the MAPPY project (JPI-Climate ERA-NET, AXIS call). The authors also acknowledge financial support from “Ministerio de Ciencia, Innovación y Universidades”, through the Severo Ochoa and María de Maeztu Program for Centers and Units of Excellence in R&D [grant number CEX2019-000968-M]. Postdoctoral fellowships were granted to the first and second authors by “Consejería de Transformación Económica, Industria, Conocimiento y Universidades” (“Junta de Andalucía”, Spain) [grant number POSTDOC-21-00381] and “Ministerio de Universidades (‘María Zambrano’ scholarship) [grant number 2021/86493], respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000968-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A method for using monthly average temperatures in phenology models for grapevine (Vitis vinifera L.)

  • García-Tejera, Omar
  • Marcos-Matamoros, Raül
  • Basile, Boris
  • Mataffo, Alessandro
  • Scognamiglio, Pasquale
  • Prieto, Henar
  • Mancha, Luis
  • Cabral, Inês
  • Queiroz, Jorge
  • Valente, Joana
  • Alves, Fernando
  • González-Reviriego, Nube
  • Hernández-Barrera, Sara
  • Mata, Mercè
  • Girona, Joan
In recent years, there have been increasing efforts to link phenology models with seasonal climate predictions in so-called Decision Support Systems (DSS) to tailor crop management strategies. However, temporal discrepancies between phenology models with temperature data gathered on a daily basis and seasonal forecasting systems providing predictability on monthly scales have limited their use. In this work, we present a novel methodology to use monthly average temperature data in phenology models. Briefly stated, we modelled the timing of the appearance of specific grapevine phenological phases using monthly average temperatures. To do so, we computed the cumulative thermal time (Sf) and the number of effective days per month (effd ). The effd is the number of days in a month on which temperatures would be above the minimum value for development (Tb ). The calculation of effd is obtained from a normal probability distribution function derived from historical weather records. We tested the methodology on four experimental plots located in different European countries with contrasting weather conditions and for four different grapevine cultivars. The root mean square deviation (RMSD) ranged from 4 to 7 days for all the phenological phases considered, at all the different sites, and for all the cultivars. Furthermore, the bias of observed vs predicted comparisons was not significantly different when using either monthly mean or daily temperature values to model phenology. This new methodology, therefore, provides an easy and robust way to incorporate monthly temperature data into grapevine phenology models., This work was supported by project RTA2015-00089-C02-02 of the Spanish Government’s Ministry of Economy and Competitiveness and by the European Union’s Horizon 2020 research and innovation programme [No 730253] and the project PCI2019-103621, financed by "Agencia Estatal de Investigación - Ministerio de Ciencia, Innovación y Universidades”, in the framework of the MAPPY project (JPI-Climate ERA-NET, AXIS call). The authors would like to thank the “Juan de la Cierva formación”, which is funded by the Ministerio de Economía y Competitividad [grant number FJCI-2017-34086] for funding Dr Omar Garcia-Tejera. The research conducted in this paper by Nube González-Reviriego and Raül Marcos-Mamoros received funding from the EU H2020 [grant agreements 730253 and 776467], Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Using machine learning for crop yield prediction in the past or the future

  • Morales, Alejandro
  • Villalobos, Francisco J.
The use of ML in agronomy has been increasing exponentially since the start of the century, including data-driven predictions of crop yields from farm-level information on soil, climate and management. However, little is known about the effect of data partitioning schemes on the actual performance of the models, in special when they are built for yield forecast. In this study, we explore the effect of the choice of predictive algorithm, amount of data, and data partitioning strategies on predictive performance, using synthetic datasets from biophysical crop models. We simulated sunflower and wheat data using OilcropSun and Ceres-Wheat from DSSAT for the period 2001-2020 in 5 areas of Spain. Simulations were performed in farms differing in soil depth and management. The data set of farm simulated yields was analyzed with different algorithms (regularized linear models, random forest, artificial neural networks) as a function of seasonal weather, management, and soil. The analysis was performed with Keras for neural networks and R packages for all other algorithms. Data partitioning for training and testing was performed with ordered data (i.e., older data for training, newest data for testing) in order to compare the different algorithms in their ability to predict yields in the future by extrapolating from past data. The Random Forest algorithm had a better performance (Root Mean Square Error 35-38%) than artificial neural networks (37-141%) and regularized linear models (64-65%) and was easier to execute. However, even the best models showed a limited advantage over the predictions of a sensible baseline (average yield of the farm in the training set) which showed RMSE of 42%. Errors in seasonal weather forecasting were not taken into account, so real-world performance is expected to be even closer to the baseline. Application of AI algorithms for yield prediction should always include a comparison with the best guess to evaluate if the additional cost of data required for the model compensates for the increase in predictive power. Random partitioning of data for training and validation should be avoided in models for yield forecasting. Crop models validated for the region and cultivars of interest may be used before actual data collection to establish the potential advantage as illustrated in this study., This work was funded by Ministerio de Ciencia e Innovación, Spain, through grant PCI2019–103621, associated to the MAPPY project (JPI-Climate ERA-NET, AXIS call), and the “María de Maeztu” program for centers and units of excellence in research and development [grant number CEX2019–000968-M]. Publication costs were funded by Grupo PAIDI AGR-119 Junta de Andalucia., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019–000968-M)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A method for using monthly average temperatures in phenology models for grapevine (Vitis vinifera L.)

  • García-Tejera, Omar
  • Marcos-Matamoros, Raül
  • Basile, Boris
  • Mataffo, Alessandro
  • Scognamiglio, Pasquale
  • Prieto, Henar
  • Mancha, Luis
  • Cabral, Inés
  • Queiroz, Jorge
  • Valente, Joana
  • Alves, Fernando
  • Gonzalez-Reviriego, Nube
  • Hernandez-Barrera, Sara
  • Mata Sola, Mercè
  • Girona, Joan
In recent years, there have been increasing efforts to link phenology models with seasonal climate predictions in so-called Decision Support Systems (DSS) to tailor crop management strategies. However, temporal discrepancies between phenology models with temperature data gathered on a daily basis and seasonal forecasting systems providing predictability on monthly scales have limited their use. In this work, we present a novel methodology to use monthly average temperature data in phenology models. Briefly stated, we modelled the timing of the appearance of specific grapevine phenological phases using monthly average temperatures. To do so, we computed the cumulative thermal time (Sf) and the number of effective days per month (effd). The effd is the number of days in a month on which temperatures would be above the minimum value for development (Tb). The calculation of effd is obtained from a normal probability distribution function derived from historical weather records. We tested the methodology on four experimental plots located in different European countries with contrasting weather conditions and for four different grapevine cultivars. The root mean square deviation (RMSD) ranged from 4 to 7 days for all the phenological phases considered, at all the different sites, and for all the cultivars. Furthermore, the bias of observed vs predicted comparisons was not significantly different when using either monthly mean or daily temperature values to model phenology. This new methodology, therefore, provides an easy and robust way to incorporate monthly temperature data into grapevine phenology models., info:eu-repo/semantics/publishedVersion