Skip to main content

SCALABLE SUSTAINABLE ANODES FOR LI-ION BATTERIES BY STRUCTURAL DESIGN

PCI2022-132993

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprogram Subprograma Estatal de Internacionalización
Call Proyectos Programación Conjunta Internacional
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance-optimized diatom-SiOx anodes for Li-ion batteries by preserving the nanostructured SiO2 shells of diatom microalgae and tailoring oxygen content

  • Thangaian, Kesavan
  • Ericson, Tove
  • Vullum, Per Erik
  • Alonso-Sánchez, Pedro
  • Svarverud, Annlinn Chen
  • Svensson, Ann Mari
  • Vullum-Bruer, Fride
  • Hahlin, Maria
  • Blanco, Maria Valeria
Nanostructured silicon oxides (SiO𝑥) are close-to-market anode materials for increasing the energy density of next-generation lithium-ion batteries (LIBs), offering a balance between high capacity and enhanced cycling stability. However, achieving precise control over SiO𝑥 composition while maintaining structural integrity remains a challenge. In this study, we pioneer the use of nanostructured diatom-SiO2 frustules from industrially cultured Nitzschia sp. microalgae as a sustainable and tunable precursor for high-performance SiO𝑥 anodes via scalable magnesiothermic reduction reaction (MgTR). By optimizing the Mg-to-diatom-SiO2 molar ratio, we demonstrate controlled partial reduction of SiO2, yielding Si nanocrystals embedded within an SiO2 matrix. Notably, we reveal that the preservation of diatom-SiO𝑥 nanoporosity is highly sensitive to reaction exothermic conditions and is effectively stabilized by introducing NaCl as a heat scavenger. Tailoring the reactant composition (SiO2:Mg:NaCl = 1:1:2.5) resulted in anodes with superior electrochemical performance, delivering high capacity retention over 200 cycles. Through a comprehensive suite of characterization techniques, we establish the structure–property-performance relationships governing SiO𝑥 anode behavior. These findings mark a major advancement in sustainable SiO𝑥 anode design, providing a scalable strategy for integrating biologically templated nanostructures into high-performance LIBs., The authors acknowledge the SUSTBATT (M-ERA.NET), Research Council of Norway, for the financial assistance (Project No. 337463). The authors thank Simon Nilsson for diatoms-SiO2 from the Swedish Algae Factory, Sweden. This work was supported by the Grant No PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and by European Union “NextGenerationEU”/PRTR. Support by the Research Council of Norway to NORTEM (197405) and SMART-H (296197) is acknowledged. The authors acknowledge Grants No. PCI2022-132993 funded by MCIN/AEI/ 10.13039/501100011033 and DGA/M4 from Diputación General de Aragón ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward the controlled synthesis of nanostructured Si and SiOx anodes for Li-Ion batteries via SiO2 magnesiothermic reduction reaction

  • Alonso-Sánchez, Pedro
  • Thangaian, Kesavan
  • Øie, Ole Andreas
  • Gaarud, Anders
  • Rodríguez Gómez, Miguel
  • Diadkin, Vadim
  • Campo, Javier
  • Cova, Federico H.
  • Blanco, Maria Valeria
Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiO x due to HF's reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiO x nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiO x advanced materials., The authors acknowledge the SUSTBATT (M-ERA.NET), Research Council of Norway, for the financial assistance (Project No. 337463 and 315947). This work was supported by the Grant No PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and by European Union”NextGenerationEU”/PRTR. Beam time allocation at BM01 of ESRF trough the A01-2-1307 experiment is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mitigating silicon amorphization in Si–Gr anodes: A pathway to stable, high-energy density anodes for Li-Ion batteries

  • Alonso-Sánchez, Pedro
  • Hua, Weicheng
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Karlsen, Jon Tobias Aga
  • Svensson, Ann Mari
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Cova, Federico H.
  • Blanco, Maria Valeria
Silicon–Graphite (SiGr) blended anodes represent a promising approach for enhancing the energy density of commercial Li-ion batteries (LIBs). However, the ≈300% volume change of the silicon component during lithiation and delithiation induces significant mechanical stress, leading to particle cracking and pulverization that compromise electrode stability. This study presents the first evidence of controlled Si lithiation in Si-rich blended anodes, where a crystalline silicon (c-Si) core remains unreacted while the outer shell undergoes complete amorphization. Operando synchrotron X-ray diffraction analysis of SiGr anodes over five consecutive cycles reveals a reversible lithiation of c-Si, which was not previously reported. Complementary transmission electron microscopy (TEM) analysis of focused ion beam (FIB)-prepared lamellae from cycled electrodes confirms the formation of an amorphous shell and preservation of the c-Si core. These findings validate the feasibility of a partial lithiation strategy for SiGr anodes and provide unprecedented insights for the design of mechanically stable electrodes. Additionally, the interpretation of lithiation/delithiation differential capacity plots is discussed in light of the observed structural evolution, offering both fundamental and practical advancements for the development of robust SiGr anodes for high-energy-density LIBs., The authors acknowledge the SUSTBATT (M-ERA.NET), Research Council of Norway, for the financial assistance (Project No. 337463). This work was supported by the Grant No. PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and by European Union “NextGenerationEU”/PRTR. Support by the Research Council of Norway to NORTEM (197405) and NorFab (295864) is acknowledged. The authors acknowledge the research project DGA/M4 granted by the Diputación General de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unlocking the electrochemical activation of diatomaceous earth SiO2 anodes for next-generation Li-Ion batteries

  • Hua, Weicheng
  • Vullum, Per Erik
  • Nilsen-Nygaard Hjelseng, Kristianne
  • Hamonnet, Johan
  • Alonso-Sánchez, Pedro
  • Zhu, Jiefang
  • Hegedüs, Zoltan
  • Rubio Zuazo, Juan
  • Cova, Federico H.
  • Svensson, Ann Mari
  • Blanco, Maria Valeria
Silica (SiO2) anodes are promising candidates for enhancing the energy density of next-generation Li-ion batteries, offering a compelling combination of high storage capacity, stable cycling performance, low cost, and sustainability. This performance stems from SiO2 unique lithiation mechanism, which involves its conversion to electroactive silicon (Si) and electrochemically inactive species. However, widespread adoption of SiO2 anodes is hindered by their slow initial lithiation. To address this, research has focused on developing electrochemical “activation protocols” that involve prolonged low-potential holding steps to promote SiO2 conversion. Despite these efforts, the complex and multi-pathway nature of SiO2 lithiation process remains poorly understood, impeding the rational design of effective activation strategies. By introducing a multi-probe characterization approach, this study reveals that, contrary to the previously proposed reaction mechanism of SiO2 anodes, the lithiation process initiates at low potentials with the direct formation of Li4SiO4 and LixSi. Electrochemical activation potential was found to significantly influence the degree of conversion, with 10 mV identified as the optimal cut-off potential for maximizing SiO2 utilization. These findings provide key enablers to unlock the full potential of SiO2 anodes for battery technology., This work was supported by the Norwegian Research Council project number 315947. The authors would also like to acknowledge support from the Research Council of Norway through the Norwegian Center for Transmission Electron Microscopy, NORTEM (197405/F50) and The Norwegian Infrastructure for Micro- and Nanofabrication, NorFab (245963/F50). The authors acknowledge Grants No. PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and DGA/M4 from Diputación General de Aragón. The authors also acknowledge the Spanish Ministerio de Ciencia, Innovacion y Universidades and Consejo Superior de Investigaciones Cientificas for financial support and for provision of synchrotron radiation facilities at BM25-SpLine (PIE 2010 6 0E 013 and PIE 2021 60 E 030). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at beamline P21.2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deciphering the impact of current, composition, and potential on the lithiation behavior of Si‐rich silicon‐graphite anodes

  • Schweigart, Philipp
  • Hua, Weicheng
  • Alonso-Sánchez, Pedro
  • Lian, Camilla
  • Nylund, Inger-Emma
  • Wragg, David
  • Lai, Samson Yuxiu
  • Cova, Federico H.
  • Svensson, Ann Mari
  • Blanco, Maria Valeria
Adding silicon (Si) to graphite (Gr) anodes is an effective approach for boosting the energy density of lithium-ion batteries, but it also triggers mechanical instability due to Si volume changes upon (de)lithiation reactions. In this work, component-specific (de)lithiation dynamics on Si-rich (30 and 70 wt.% Si) SiGr anodes at various charge/discharge C-rates are unveiled and compared to a graphite-only electrode (100Gr) via operando synchrotron X-ray diffraction coupled with differential capacity plots analysis. Results show preferential lithiation of amorphous Si above ≈200 mV and competing lithiation of Gr, amorphous Si, and crystalline Si below ≈200 mV. Discharge proceeds via sequential delithiation of Gr and amorphous lithium silicide. Si shifts the interconversion potentials of graphite intercalation compounds, lowering the Gr state of charge compared to 100Gr. In the 30% Si electrode, crystalline Si amorphization at potentials <110 mV is found to be kinetically hindered at C-rates higher than C/5, which can be key for enhancing the cycling stability of SiGr anodes. The 70% Si electrode exhibits restricted lithium diffusion in Gr, full Si amorphization, and Li15Si4 formation. These findings related to the potential- and current-dependent dynamic changes on SiGr blends are crucial for designing stable high energy density SiGr anodes., Dr. Vadim Dyadkin (BM01 SNBL) is kindly acknowledged for local support at the beamline during conduction of the experiments, raw data acquisition and treatment. P.S. gratefully acknowledges financial support of this work by the Research Council of Norway (contract number 306400) within the project “Norwegian Giga Battery Factories (NorGiBatF)”. M.V.B and W.H. acknowledge the Norwegian Research Council (contract number 315947). P.A.S. acknowledges Grants No. PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and DGA/M4 from Diputación General de Aragón. Dr. Hamid Khanmohammadi is gratefully acknowledged for performing cross-sectional micrographs and EDS of SiGr electrodes at the NTNU-PFIB lab, which is part of the SMART-H Infrastructure, supported by the Research Council of Norway (project 296197) and NTNU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strategies toward the production of nanoporous SiOx/C anodes from the sustainable diatom-SiO2 for Li-Ion batteries: A comparative study of different carbon amounts

  • Gaarud, Anders
  • Thangaian, Kesavan
  • Alonso-Sánchez, Pedro
  • Blanco, Maria Valeria
The data that support the findings of this study are available in the supplementary material of this article., Nanostructured SiOx/C composites are promising candidates for high energy density anodes with extended lifespan in next-generation Li-ion batteries (LIBs). However, integrating sustainable precursors for the synthesis of high performance SiOx/C negative electrodesremains a key challenge. In this study, nanoporous SiO2 derived from the shells of industrially cultured diatom microalgae is successfully used as a template for synthesizing SiOx via the magnesiothermic reduction reaction (MgTR), while the effectiveness of different carbon coating (CC) strategies to produce diatom-SiOx/C from glucose as carbon precursor is thoroughly analyzed. Notably, the original nanostructure of the diatom-SiO2 frustule is preserved throughout the synthesis process, and it is demonstrated that increasing the heating ramp during MgTR enhances the Si yield, leading to a significant increase in specific capacity of the anodes from 1064 mAh.g−1 (2 °C/min−1) to 1846 mAh.g−1 (20 °C/min−1). A comparative analysis of three synthesis pathways for producing diatom-SiOx/C composites: 1) MgTR of diatom-SiO2 followed by CC, 2) CC of diatom-SiO2 followed by MgTR, and 3) simultaneous reduction of diatom-SiO2 and glucose precursor, revealed that pathway (1) is most effective for producing highcapacity diatom-SiOx/C anodes. These findings provide key enablers for developing sustainable SiOx/C anodes of superior electrochemical performance., The authors acknowledge the SUSTBATT (M-ERA.NET), Research Council of Norway, for the financial assistance (Project No. 337463). The authors thank Simon Nilsson for providing diatom-SiO2 from the Swedish Algae Factory, Sweden. The Research Council of Norway is acknowledged for the support to the Norwegian Micro- and Nano-Fabrication Facility, NorFab. The authors acknowledge Grants No. PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033 and DGA/M4 from Diputacion General de Aragon., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling the temperature-dependent reaction dynamics of Li3BO3: Formation and carbonation mechanisms via in situ synchrotron XRD

  • Orozco, María José
  • Grasso, María Laura
  • Alonso-Sánchez, Pedro
  • Cova, Federico H.
  • Rodriguez, María Laura
  • Blanco, Maria Valeria
  • Gennari, Fabiana C.
Tri-lithium borate (Li3BO3) has emerged as a promising CO2 sorbent for intermediate-high temperature applications, particularly in post-combustion carbon capture processes. Its high CO2 uptake capacity, along with improved kinetic performance when modified with additives, makes it a compelling alternative to conventional lithium-based sorbents. Upon carbonation, Li3BO3 reacts to form lithium carbonate (Li2CO3) and lithium borates, such as Li6B4O9 and LiBO2, with reaction kinetics strongly dependent on CO2 partial pressure and temperature. However, the fundamental high-temperature reaction dynamics governing Li3BO3 formation and carbonation remain largely unexplored. This study employs time-resolved in situ synchrotron X-ray diffraction (XRD) to unveil the phase transformations and reaction pathway occurring during Li3BO3 synthesis and its reaction with CO2. Structural evolution during the heating of a mechanically milled H3BO3-Li2CO3 mixture from room temperature to 600 °C reveals a successful transformation to Li3BO3 via a multi-step mechanism. In situ high-temperature synchrotron XRD measurements coupled with Rietveld refinement demonstrate that the carbonation mechanism of Li3BO3 is significantly influenced by CO2 partial pressure. Under 10% of CO2, Li6B4O9 and Li2CO3 are identified from 400 °C, followed by the formation of Li(2+x)C(1−x)BxO3 solid solution between 530 °C and 580 °C. In contrast, under pure CO2, Li6B4O9 forms at 350 °C, with LiBO2 appearing at higher temperatures. Notably, the temperature range of Li(2+x)C(1−x)BxO3 stabilization shifts toward higher temperatures under pure CO2 conditions. Understanding these transformations is essential for optimizing the performance and stability of Li3BO3 in CO2 capture applications and serves as a basis for future additive optimization, contributing to the broader development of high-temperature sorbent materials., This work was supported by the Grant No PCI2022-132993 funded by MCIN/AEI/10.13039/501100011033, DGA/M4 from Diputación General de Aragón, and European Union “NextGeneration EU”/PRTR, by financial support of CNEA (the National Commission of Atomic Energy), ANPCyT - PICT 2021-1270 and the High Impact Federal Networks Project (CapCO2). Beamtime allocation at BM01 of ESRF trough the A01-2-1316 experiment and support from C. Fuller is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-resolved analysis of extensive silicon amorphization in SiGr anodes for Li-Ion batteries via operando synchrotron X-ray diffraction

  • Alonso-Sánchez, Pedro
  • Hua, Weicheng
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Chernyshov, Dmitry
  • Fuller, Chloe A.
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Blanco, Maria Valeria
  • Cova, Federico H.
Silicon–graphite (SiGr) blended negative electrodes have reached the Li-ion battery (LIB) market and outperform pure graphite in specific capacity. However, commercial implementations still rely on low Si contents, whereas industry targets ≈30 wt% Si and higher, where accelerated degradation and complex Si–Gr coupling limit the usable Si fraction and hinder the transition to Si-rich electrodes. This study resolves the dynamic interplay between Si and Gr (de)lithiation reactions in a 30:70 Si:Gr blended electrode over the first five cycles by combining operando synchrotron X-ray diffraction with TEM observations. Crystalline silicon (c-Si) undergoes ≈95% amorphization in the first cycle, leaving minor crystalline remnants in core–shell domains. A broad first-cycle reduction feature in the voltage–capacity profile at 0.35–0.70 V vs Li/Li+ accompanies this structural transition and the substantial irreversible capacity loss. From the second cycle onward, Gr lithiation degree (x in LixC6) declines from 0.84 to 0.33, evidencing a shifting in Si–Gr utilization balance. A benchmark under identical conditions against a partially amorphized Si-rich electrode retaining ≈25 % c-Si after cycling and exhibiting a more stable Gr lithiation degree demonstrates that the extent of early Si amorphization governs both the Si–Gr balance and overall electrode behavior. By quantitatively tracking amorphization with high temporal resolution and comparing extensive versus partial transformation pathways, this work establishes a time-resolved structural framework for Si-rich blended anodes, underscoring early-cycle amorphization control as a practical design lever., The authors acknowledge the SUSTBATT M-ERA.NET Project (Project No. 9288) and the Research Council of Norway (Project No. 337463) for the financial assistance. This work was supported by the Grant No. PCI2022-132993 funded by MCIN/AEI/ 10.13039/501100011033 and by European Union “NextGenerationEU”/PRTR. Support by the Research Council of Norway to NORTEM (197405) and NorFab (295864) is acknowledged. The authors acknowledge the research project DGA/ M4 granted by the Diputación General de Aragón . The BM01 beamline of the SNBL (ESRF) is acknowledged for beamtime allocation through proposal A01-2-1292 and support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-temperature synthesis of silicon anodes from biosilica via AlCl3-assisted magnesiothermic reduction

  • Alonso-Sánchez, Pedro
  • Hvidsten Swensen, Emilie
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Diadkin, Vadim
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Svensson, Ann Mari
  • Cova, Federico H.
  • Blanco, Maria Valeria
Silicon is a high-capacity anode material, yet its scalable production from sustainable precursors requires low-temperature and controllable synthesis routes. Diatom-derived SiO2 provides an abundant biogenic feedstock, but its conversion to silicon by magnesiothermic reduction (MgTR), typically conducted at 600–900 °C, is limited by the highly exothermic nature of the reaction, which induces local overheating, promotes side-phase formation, and often results in incomplete SiO2 reduction. Here, we elucidate the reaction pathway of AlCl3-assisted MgTR as a strategy to decrease synthesis temperature and improve reduction efficiency. By correlating the heating ramp rate, isothermal hold time, and salt-to-silica ratio with phase evolution and the crystalline silicon fraction, we identify the parameters governing oxygen abstraction and Si formation. Time-resolved in situ synchrotron X-ray diffraction provides direct insight into the reaction mechanism, revealing the early formation of metallic Al, the transient formation of MgAl2Cl8 as an intermediate, and the subsequent crystallization of Si concurrent with the consumption of metallic Al, thereby suggesting that Al acts as an effective reducing agent. Silicon formation proceeds within a chloride-rich molten phase and is achieved at temperatures as low as 250–300 °C. The crystalline silicon fraction is primarily dictated by heating conditions and AlCl3 content, with optimized parameters maximizing the Si fraction while suppressing inactive byproducts. Electrochemical evaluation of the graphite-SiOx electrode blends demonstrates enhanced reversible capacity relative to graphite together with moderate cycling stability, confirming the electrochemical activity of the synthesized material. Overall, this work unveils the mechanistic framework of AlCl3-assisted MgTR and provides synthesis guidelines for the low-temperature conversion of diatom biosilica into silicon-based anode materials., The authors acknowledge financial support from the SUSTBATT project (M-ERA.NET, Project No. 337463), funded by the Research Council of Norway (Project No. 315947). This work was also supported by Grant No. PCI2022-132993, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. Support from the Research Council of Norway to NORTEM (Project No. 197405) is also gratefully acknowledged. Beamtime at BM01 (SNBL), ESRF, through experiment MA-6477, is acknowledged. The authors thank the Swedish Algae Factory for providing the diatom SiO2 material., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Deciphering the Impact of Current, Composition, and Potential on the Lithiation Behavior of Si-Rich Silicon-Graphite Anodes

  • Schweigart, Philipp
  • Hua, Weicheng
  • Alonso Sánchez, Pedro
  • Lian, Camilla
  • Nylund, Inger-Emma
  • Wragg, David
  • Lai, Samson Yuxiu
  • Cova, Federico
  • Svensson, Ann Mari
  • Blanco, Maria Valeria
Adding silicon (Si) to graphite (Gr) anodes is an effective approach for boosting the energy density of lithium‐ion batteries, but it also triggers mechanical instability due to Si volume changes upon (de)lithiation reactions. In this work, component‐specific (de)lithiation dynamics on Si‐rich (30 and 70 wt.% Si) SiGr anodes at various charge/discharge C‐rates are unveiled and compared to a graphite‐only electrode (100Gr) via operando synchrotron X‐ray diffraction coupled with differential capacity plots analysis. Results show preferential lithiation of amorphous Si above ≈200 mV and competing lithiation of Gr, amorphous Si, and crystalline Si below ≈200 mV. Discharge proceeds via sequential delithiation of Gr and amorphous lithium silicide. Si shifts the interconversion potentials of graphite intercalation compounds, lowering the Gr state of charge compared to 100Gr. In the 30% Si electrode, crystalline Si amorphization at potentials <110 mV is found to be kinetically hindered at C‐rates higher than C/5, which can be key for enhancing the cycling stability of SiGr anodes. The 70% Si electrode exhibits restricted lithium diffusion in Gr, full Si amorphization, and Li15Si4 formation. These findings related to the potential‐ and current‐dependent dynamic changes on SiGr blends are crucial for designing stable high energy density SiGr anodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Toward the Controlled Synthesis of Nanostructured Si and SiOx Anodes for Li-Ion Batteries via SiO2 Magnesiothermic Reduction Reaction

  • Alonso Sánchez, Pedro
  • Thangaian, Kesavan
  • Øie, Ole Andreas
  • Gaarud, Anders
  • Rodríguez Gómez, Miguel
  • Diadkin, Vadim
  • Campo, Javier
  • Cova, Federico Héctor
  • Blanco, María Valeria
Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiOx due to HF’s reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiOx nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiOx advanced materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Performance-optimized diatom- [fórmula] anodes for Li-ion batteries by preserving the nanostructured SiO2 shells of diatom microalgae and tailoring oxygen content

  • Thangaian, Kesavan
  • Ericson, Tove
  • Vullum, Per Erik
  • Alonso-Sánchez, Pedro
  • Svarverud, Annlinn Chen
  • Svensson, Ann Mari
  • Vullum-Bruer, Fride
  • Hahlin, Maria
  • Blanco, Maria Valeria
Nanostructured silicon oxides (SiOx) are close-to-market anode materials for increasing the energy density of next-generation lithium-ion batteries (LIBs), offering a balance between high capacity and enhanced cycling stability. However, achieving precise control over SiOx composition while maintaining structural integrity remains a challenge. In this study, we pioneer the use of nanostructured diatom-SiO2 frustules from industrially cultured Nitzschia sp. microalgae as a sustainable and tunable precursor for high-performance SiOx anodes via scalable magnesiothermic reduction reaction (MgTR). By optimizing the Mg-to-diatom-SiO2 molar ratio, we demonstrate controlled partial reduction of SiO2, yielding Si nanocrystals embedded within an SiO2 matrix. Notably, we reveal that the preservation of diatom-SiOx nanoporosity is highly sensitive to reaction exothermic conditions and is effectively stabilized by introducing NaCl as a heat scavenger. Tailoring the reactant composition (SiO2:Mg:NaCl = 1:1:2.5) resulted in anodes with superior electrochemical performance, delivering high capacity retention over 200 cycles. Through a comprehensive suite of characterization techniques, we establish the structure–property-performance relationships governing SiOx anode behavior. These findings mark a major advancement in sustainable SiOx anode design, providing a scalable strategy for integrating biologically templated nanostructures into high-performance LIBs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unlocking the Electrochemical Activation of Diatomaceous Earth <scp>SiO<sub>2</sub></scp> Anodes for Next‐Generation Li‐Ion Batteries

  • Hua, Weicheng
  • Vullum, Per Erik
  • Hjelseng, Kristianne Nilsen-Nygaard
  • Hamonnet, Johan
  • Alonso-Sánchez, Pedro
  • Zhu, Jiefang
  • Hegedüs, Zoltan
  • Zuazo, Juan Rubio
  • Cova, Federico
  • Svensson, Ann Mari
  • Blanco, Maria Valeria
Silica (SiO2) anodes are promising candidates for enhancing the energy density of next‐generation Li‐ion batteries, offering a compelling combination of high storage capacity, stable cycling performance, low cost, and sustainability. This performance stems from SiO2 unique lithiation mechanism, which involves its conversion to electroactive silicon (Si) and electrochemically inactive species. However, widespread adoption of SiO2 anodes is hindered by their slow initial lithiation. To address this, research has focused on developing electrochemical “activation protocols” that involve prolonged low‐potential holding steps to promote SiO2 conversion. Despite these efforts, the complex and multi‐pathway nature of SiO2 lithiation process remains poorly understood, impeding the rational design of effective activation strategies. By introducing a multi‐probe characterization approach, this study reveals that, contrary to the previously proposed reaction mechanism of SiO2 anodes, the lithiation process initiates at low potentials with the direct formation of Li4SiO4 and LixSi. Electrochemical activation potential was found to significantly influence the degree of conversion, with 10 mV identified as the optimal cut‐off potential for maximizing SiO2 utilization. These findings provide key enablers to unlock the full potential of SiO2 anodes for battery technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mitigating Silicon Amorphization in Si–Gr Anodes: A Pathway to Stable, High‐Energy Density Anodes for Li‐Ion Batteries

  • Alonso-Sánchez, Pedro
  • Hua, Weicheng
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Karlsen, Jon Tobias Aga
  • Svensson, Ann Mari
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Cova, Federico
  • Blanco, Maria Valeria
Silicon–Graphite (SiGr) blended anodes represent a promising approach for enhancing the energy density of commercial Li‐ion batteries (LIBs). However, the ≈300% volume change of the silicon component during lithiation and delithiation induces significant mechanical stress, leading to particle cracking and pulverization that compromise electrode stability. This study presents the first evidence of controlled Si lithiation in Si‐rich blended anodes, where a crystalline silicon (c‐Si) core remains unreacted while the outer shell undergoes complete amorphization. Operando synchrotron X‐ray diffraction analysis of SiGr anodes over five consecutive cycles reveals a reversible lithiation of c‐Si, which was not previously reported. Complementary transmission electron microscopy (TEM) analysis of focused ion beam (FIB)‐prepared lamellae from cycled electrodes confirms the formation of an amorphous shell and preservation of the c‐Si core. These findings validate the feasibility of a partial lithiation strategy for SiGr anodes and provide unprecedented insights for the design of mechanically stable electrodes. Additionally, the interpretation of lithiation/delithiation differential capacity plots is discussed in light of the observed structural evolution, offering both fundamental and practical advancements for the development of robust SiGr anodes for high‐energy‐density LIBs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unveiling the temperature-dependent reaction dynamics of Li3BO3: Formation and carbonation mechanisms via in situ synchrotron XRD

  • Orozco, María José
  • Grasso, María Laura
  • Alonso-Sánchez, Pedro
  • Cova, Federico
  • Rodriguez, María Laura
  • Blanco, María Valeria
  • Gennari, Fabiana C.
Tri-lithium borate (Li3BO3) has emerged as a promising CO2 sorbent for intermediate-high temperature applications, particularly in post-combustion carbon capture processes. Its high CO2 uptake capacity, along with improved kinetic performance when modified with additives, makes it a compelling alternative to conventional lithium-based sorbents. Upon carbonation, Li3BO3 reacts to form lithium carbonate (Li2CO3) and lithium borates, such as Li6B4O9 and LiBO2, with reaction kinetics strongly dependent on CO2 partial pressure and temperature. However, the fundamental high-temperature reaction dynamics governing Li3BO3 formation and carbonation remain largely unexplored. This study employs time-resolved in situ synchrotron X-ray diffraction (XRD) to unveil the phase transformations and reaction pathway occurring during Li3BO3 synthesis and its reaction with CO2. Structural evolution during the heating of a mechanically milled H3BO3-Li2CO3 mixture from room temperature to 600 ◦C reveals a successful transformation to Li3BO3 via a multi-step mechanism. In situ hightemperature synchrotron XRD measurements coupled with Rietveld refinement demonstrate that the carbonation mechanism of Li3BO3 is significantly influenced by CO2 partial pressure. Under 10% of CO2, Li6B4O9 and Li2CO3 are identified from 400 ◦C, followed by the formation of Li(2+x)C(1− x)BxO3 solid solution between 530 ◦C and 580 ◦C. In contrast, under pure CO2, Li6B4O9 forms at 350 ◦C, with LiBO2 appearing at higher temperatures. Notably, the temperature range of Li(2+x)C(1− x)BxO3 stabilization shifts toward higher temperatures under pure CO2 conditions. Understanding these transformations is essential for optimizing the performance and stability of Li3BO3 in CO2 capture applications and serves as a basis for future additive optimization, contributing to the broader development of high-temperature sorbent materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Time-resolved analysis of extensive silicon amorphization in SiGr anodes for Li-Ion batteries via operando synchrotron X-ray diffraction

  • Alonso-Sánchez, Pedro
  • Hua, Weicheng
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Chernyshov, Dmitry
  • Fuller, Chloe A.
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Blanco, Maria Valeria
  • Cova, Federico
Silicon–graphite (SiGr) blended negative electrodes have reached the Li-ion battery (LIB) market and outperform pure graphite in specific capacity. However, commercial implementations still rely on low Si contents, whereas industry targets ≈30 wt% Si and higher, where accelerated degradation and complex Si–Gr coupling limit the usable Si fraction and hinder the transition to Si-rich electrodes. This study resolves the dynamic interplay between Si and Gr (de)lithiation reactions in a 30:70 Si:Gr blended electrode over the first five cycles by combining operando synchrotron X-ray diffraction with TEM observations. Crystalline silicon (c-Si) undergoes ≈95% amorphization in the first cycle, leaving minor crystalline remnants in core–shell domains. A broad first-cycle reduction feature in the voltage–capacity profile at 0.35–0.70 V vs Li/Li+ accompanies this structural transition and the substantial irreversible capacity loss. From the second cycle onward, Gr lithiation degree (x in LixC6) declines from 0.84 to 0.33, evidencing a shifting in Si–Gr utilization balance. A benchmark under identical conditions against a partially amorphized Si-rich electrode retaining ≈25 % c-Si after cycling and exhibiting a more stable Gr lithiation degree demonstrates that the extent of early Si amorphization governs both the Si–Gr balance and overall electrode behavior. By quantitatively tracking amorphization with high temporal resolution and comparing extensive versus partial transformation pathways, this work establishes a time-resolved structural framework for Si-rich blended anodes, underscoring early-cycle amorphization control as a practical design lever.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low-temperature synthesis of silicon anodes from biosilica via AlCl3-assisted magnesiothermic reduction

  • Alonso-Sánchez, Pedro
  • Hvidsten Swensen, Emilie
  • Thangaian, Kesavan
  • Vullum, Per Erik
  • Diadkin, Vadim
  • Vullum-Bruer, Fride
  • Campo, Javier
  • Svensson, Ann Mari
  • Cova, Federico
  • Blanco, Maria Valeria
Silicon is a high-capacity anode material, yet its scalable production from sustainable precursors requires low-temperature and controllable synthesis routes. Diatom-derived SiO2 provides an abundant biogenic feedstock, but its conversion to silicon by magnesiothermic reduction (MgTR), typically conducted at 600–900 °C, is limited by the highly exothermic nature of the reaction, which induces local overheating, promotes side-phase formation, and often results in incomplete SiO2 reduction. Here, we elucidate the reaction pathway of AlCl3-assisted MgTR as a strategy to decrease synthesis temperature and improve reduction efficiency. By correlating the heating ramp rate, isothermal hold time, and salt-to-silica ratio with phase evolution and the crystalline silicon fraction, we identify the parameters governing oxygen abstraction and Si formation. Time-resolved in situ synchrotron X-ray diffraction provides direct insight into the reaction mechanism, revealing the early formation of metallic Al, the transient formation of MgAl2Cl8 as an intermediate, and the subsequent crystallization of Si concurrent with the consumption of metallic Al, thereby suggesting that Al acts as an effective reducing agent. Silicon formation proceeds within a chloride-rich molten phase and is achieved at temperatures as low as 250–300 °C. The crystalline silicon fraction is primarily dictated by heating conditions and AlCl3 content, with optimized parameters maximizing the Si fraction while suppressing inactive byproducts. Electrochemical evaluation of the graphite-SiOx electrode blends demonstrates enhanced reversible capacity relative to graphite together with moderate cycling stability, confirming the electrochemical activity of the synthesized material. Overall, this work unveils the mechanistic framework of AlCl3-assisted MgTR and provides synthesis guidelines for the low-temperature conversion of diatom biosilica into silicon-based anode materials.