DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication
Artículo científico (JournalArticle)
High Light Utilization and Color Rendering in Vacuum-Deposited Semitransparent Perovskite Solar Cells
In press, Formamidinium lead iodide perovskite compositions have a low open circuit voltage deficit and thus a higher power conversion efficiency (PCE) potential. However, their low bandgap makes it difficult to achieve a semitransparent perovskite solar cell (ST-PSC) with a high average visible transmittance (AVT) and thus, a high light utilization efficiency (LUE). Attaining a high AVT in such low bandgap perovskite‑based semitransparent solar cells requires the perovskite layer to be very thin (thickness < ≈100 nm) and the rear electrode to be made of a transparent conductive oxide. Moreover, both the front and rear electrodes should exhibit minimal reflectance losses. In this work, meeting these requirements, fully vacuum-deposited, low bandgap (≈1.55 eV, ≈100 nm thick) semitransparent perovskite solar cells are fabricated that demonstrate a high LUE value of 4.2 (PCE: 9.26% and AVT: 45.3%). Additionally, a high color rendering index of 82.4 along with a high AVT of ≈48.5% is achieved in a ST-PSC via modulation of the device reflectance by tuning both the perovskite layer thickness and the rear electrode stack. The ST‑PSCs retained > 90% of their efficiency for >1000 h when thermally stressed at 85 °C in N2 atmosphere., Funded by the European Union. Views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. VALHALLA project has received funding from Horizon Europe Research and Innovation Action program under Grant Agreement n° 101082176. Authors acknowledge also support by the Ministry of Science and Innovation (MCIN), and the Spanish State Research Agency (AEI): projects TED2021-129679B-C21 and C22, grant IJC2020-045130-I, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR; project PCI2023-145969-2 funded by MICIU/AEI/10.13039/501100011033 and co-funded by the European Union; grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033 and by “The ESF invests in your future” Also, authors are grateful for funding received from “ERDF A way of making Europe”, and the Advanced Materials programme supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/022)., Peer reviewed
Project:
EC / HE 101082176
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 TED2021-129679B-C21
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 TED2021-129679B-C22
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 IJC2020-045130-I
,
AEI PCI2023-145969-2
,
AEI RYC2019-027187-I
DOI: http://hdl.handle.net/10261/403433, https://api.elsevier.com/content/abstract/scopus_id/105015561665
HANDLE: http://hdl.handle.net/10261/403433, https://api.elsevier.com/content/abstract/scopus_id/105015561665