Skip to main content

TERAPIA GENICA BASADA EN HIPERTERMIA MAGNETICA LOCALIZADA PARA INMUNOMODULACION

PCIN-2017-127

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Altering model cell membranes by means of localized magnetic heating

  • Ruiz Rincón, Silvia
  • González-Orive, Alejandro
  • Grazú, Valeria
  • Fratila, Raluca M.
  • Fuente, Jesús M. de la
  • Cea, Pilar
Isolated iron oxide magnetic nanoparticles (MNPs), 12 nm in diameter, coated with oleic acid molecules as capping agents have been deposited by the Langmuir-Blodgett (LB) method onto a model cell membrane incorporating 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and Cholesterol (Chol) in the 1:1 ratio, which was also fabricated by the LB technique. Atomic Force Microscopy (AFM) experiments showed that the application of an alternating magnetic field results in the embedding of the MNPs through the phospholipidic layer. These experimental results reveal that the heating of individual MNPs may induce a local increase in the fluidity of the film with a large control of the spatial and temporal specificity., We are grateful for financial assistance from the European MagicCellGene Project (M-ERA.NET COFUND call 2016, funded by Ministerio de Ciencia e Innovación from Spain in the framework of projects PCIN-2017-127 and PCIN-2017-060) and Spanish MINECO (PGC2018-096016-B-I00 to R.M.F). R.M.F. also acknowledges financial support from European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 657215 and from Ministerio de Economía y Competitividad and FSE/Agencia Estatal de Investigación (Ramón y Cajal subprogram RYC-2015-17640). Authors also acknowledge support from DGA and Fondos Feder for funding Platon (E31_20R) and Bionanosurf (E15_17R) research groups., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom effect in atomic force microscopy nanomechanics

  • Chiodini, Stefano
  • Ruiz Rincón, Silvia
  • García, Pablo D.
  • Martín, Santiago
  • Kettelhoit, Katharina
  • Armenia, Ilaria
  • Werz, Daniel B.
  • Cea, Pilar
In this work, the influence of the rigid substrate on the determination of the sample Young's modulus, the so‐called bottom‐effect artifact, is demonstrated by an atomic force microscopy force‐spectroscopy experiment. The nanomechanical properties of a one‐component supported lipid membrane (SLM) exhibiting areas of two different thicknesses are studied: While a standard contact mechanics model (Sneddon) provides two different elastic moduli for these two morphologies, it is shown that Garcia's bottom‐effect artifact correction yields a unique value, as expected for an intrinsic material property. Remarkably, it is demonstrated that the ratio between the contact radius (and not only the indentation) and the sample thickness is the key parameter addressing the relevance of the bottom‐effect artifact. The experimental results are validated by finite element method simulations providing a solid support to Garcia's theory. The amphiphilic nature of the investigated material is representative of several kinds of lipids, suggesting that the results have far reaching implications for determining the correct Young's modulus of SLMs. The generality of Garcia's bottom‐effect artifact correction allows its application to every kind of supported soft film., S.R.‐R. and P.D.G. contributed equally to this work. S.C., S.M., and P.C. are grateful for financial assistance from the European MagicCellGene Project (M‐ERA.NET COFUND call 2016, Ministerio de Economía y Competitividad from Spain in the framework of project PCIN‐2017‐127). P.C. and S.M. also acknowledge support from DGA and Fondos FEDER for funding Platon research group (E31_17R). K.K. and D.B.W. are grateful to the German Science Foundation (SFB 803, project A05) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of molecular interactions between components in phospholipid-immunosuppressant-antioxidant mixed langmuir films

  • Jurak, Małgorzata
  • Szafran, Klaudia
  • Cea, Pilar
  • Martín, Santiago
The study of Langmuir monolayers incorporating biomimetic and bioactive substances plays an important role today in assessing the properties and quality of the molecular films for potential biomedical applications. Here, miscibility of binary and ternary monolayers of phospholipid (dioleoyl phosphatidylcholine, DOPC), immunosuppressant (cyclosporine A, CsA), and antioxidant (lauryl gallate, LG) of varying molar fractions was analyzed by means of the Langmuir technique coupled with a surface potential (ΔV) module at the air–water interface. The surface pressure–area per molecule (π–A) isotherms provided information on the physical state of the films at a given surface pressure, the monolayer packing and ordering, and the type and strength of intermolecular interactions. Surface potential–area (ΔV–A) isotherms revealed the molecular orientation changes at the interface upon compression. In addition, the apparent dipole moment of the monolayer-forming molecules was determined from the surface potential isotherms. The obtained results indicated that the film compression provoked subsequent changes of CsA conformation and/or orientation, conferring better affinity for the hydrocarbon environment. The mutual interactions between the components were analyzed here in terms of the excess and total Gibbs energy of mixing, whose values depended on the stoichiometry of the mixed films. The strongest attraction, thus the highest thermodynamic stability, was found for a DOPC–CsA–LG mixture with a 1:1:2 molar ratio. Based on these results, a molecular model for the organization of the molecules within the Langmuir film was proposed. Through this model, we elucidated the significant role of LG in improving the miscibility of CsA in the model DOPC membrane and thus in increasing the stability of self-assembled monolayers by noncovalent interactions, such as H-bonds and Lifshitz–van der Waals forces. The above 1:1:2 combination of three components is revealed as the most promising film composition for the modification of implant device surfaces to improve their biocompatibility. Further insight into mechanisms concerning drug–membrane interactions at the molecular level is provided, which results in great importance for biocoating design and development as well as for drug release at target sites., This study was financially supported by the National Science Centre in Poland, under the research project “Comprehensive physicochemical studies of multicomponent films: phospholipid-immunosuppressant-antioxidant on liquid or solid support,” no. 2019/03/X/ST4/01470. P.C. and S.M. acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E31_20R) and financial assistance from the European MagicCellGene Project (M-ERA.NET COFUND call 2016, Ministerio de Economía y Competitividad from Spain in the framework of project PCIN-2017-127)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bottom Effect in Atomic Force Microscopy Nanomechanics

  • Chiodini, Stefano
  • Ruiz-Rincón, Silvia
  • Garcia, P.D.
  • Martin, Santiago
  • Kettelhoit, K.
  • Armenia, I.
  • Werz, D.B.
  • Cea, Pilar
In this work, the influence of the rigid substrate on the determination of the sample Young''s modulus, the so-called bottom-effect artifact, is demonstrated by an atomic force microscopy force-spectroscopy experiment. The nanomechanical properties of a one-component supported lipid membrane (SLM) exhibiting areas of two different thicknesses are studied: While a standard contact mechanics model (Sneddon) provides two different elastic moduli for these two morphologies, it is shown that Garcia''s bottom-effect artifact correction yields a unique value, as expected for an intrinsic material property. Remarkably, it is demonstrated that the ratio between the contact radius (and not only the indentation) and the sample thickness is the key parameter addressing the relevance of the bottom-effect artifact. The experimental results are validated by finite element method simulations providing a solid support to Garcia''s theory. The amphiphilic nature of the investigated material is representative of several kinds of lipids, suggesting that the results have far reaching implications for determining the correct Young''s modulus of SLMs. The generality of Garcia''s bottom-effect artifact correction allows its application to every kind of supported soft film.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of Molecular Interactions between Components in Phospholipid-Immunosuppressant-Antioxidant Mixed Langmuir Films

  • Jurak, M.
  • Szafran, K.
  • Cea, P.
  • Martín, S.
The study of Langmuir monolayers incorporating biomimetic and bioactive substances plays an important role today in assessing the properties and quality of the molecular films for potential biomedical applications. Here, miscibility of binary and ternary monolayers of phospholipid (dioleoyl phosphatidylcholine, DOPC), immunosuppressant (cyclosporine A, CsA), and antioxidant (lauryl gallate, LG) of varying molar fractions was analyzed by means of the Langmuir technique coupled with a surface potential (?V) module at the air-water interface. The surface pressure-area per molecule (?-A) isotherms provided information on the physical state of the films at a given surface pressure, the monolayer packing and ordering, and the type and strength of intermolecular interactions. Surface potential-area (?V-A) isotherms revealed the molecular orientation changes at the interface upon compression. In addition, the apparent dipole moment of the monolayer-forming molecules was determined from the surface potential isotherms. The obtained results indicated that the film compression provoked subsequent changes of CsA conformation and/or orientation, conferring better affinity for the hydrocarbon environment. The mutual interactions between the components were analyzed here in terms of the excess and total Gibbs energy of mixing, whose values depended on the stoichiometry of the mixed films. The strongest attraction, thus the highest thermodynamic stability, was found for a DOPC-CsA-LG mixture with a 1:1:2 molar ratio. Based on these results, a molecular model for the organization of the molecules within the Langmuir film was proposed. Through this model, we elucidated the significant role of LG in improving the miscibility of CsA in the model DOPC membrane and thus in increasing the stability of self-assembled monolayers by noncovalent interactions, such as H-bonds and Lifshitz-van der Waals forces. The above 1:1:2 combination of three components is revealed as the most promising film composition for the modification of implant device surfaces to improve their biocompatibility. Further insight into mechanisms concerning drug-membrane interactions at the molecular level is provided, which results in great importance for biocoating design and development as well as for drug release at target sites. © 2021 American Chemical Society. All rights reserved.