Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Weather-Resistant Thermoresponsive UV-Curable Smart Window Composites Based on Paraffin Particles

  • Villabona, Marc|||0000-0001-9106-5405
  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
  • Hernando, Jordi|||0000-0002-1126-4138
Thermoresponsive composites made from phase change material particles embedded in polymer matrices show great promise for regulating sunlight transmittance in smart windows. However, their current performance is hindered by critical limitations. Composites obtained from water-soluble matrices present excellent optical performance, but they exhibit intrinsic poor weathering resistance, as they swell and dissolve upon water exposure (e.g., during rainfall or cleaning with aqueous solutions). In contrast, those prepared from water-resistant curable polymers typically require expensive or custom-made phase change materials, and very often show undesired optical properties (e.g., opaque states at room temperature or below). To address this challenge, in this work we developed novel thermoresponsive composite films comprising readily available paraffin particles dispersed within a cross-linked, water-insoluble acrylate matrix. The resulting materials exhibit excellent resistance to water while preserving the characteristic smart window behavior of paraffin-polymer composites; i.e., they remain transparent at low temperatures due to refractive index matching between the matrix and the solid paraffin particles, and become opaque once this condition is lost upon thermally induced paraffin melting, enabling efficient modulation of solar heating gain. In addition, because paraffin-acrylate films are produced via photopolymerization, they are obtained in a fast, straightforward and scalable manner. These features, combined with their low cost, mechanical flexibility, and multistimuli-responsive behavior, make paraffin-acrylate composites a robust and scalable platform for next-generation smart window technologies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days., This work was supported by MINECO/FEDER (RTI2018-098027-B-C21, PID2019-106171RB-100 and PDC2022-133368-I00 projects) and Generalitat de Catalunya (2017 SGR00465 and 2021 PROD 00190 projects). J. R. O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship. ICN2 acknowledges support from the Severo Ochoa program (MINECO, SEV-2017-0706) and the CERCA program (Generalitat de Catalunya)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data associated to the article "Multistimuli-responsive smart windows based on paraffin-polymer composites"

  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
Description of methods used for collection-generation of data: Refractive index measurements: data was obtained using an Abbe refractometer NAR-1T. The temperature was controled with a recirculating thermobath system. 1-bromonaphtalene was used as inmersion oil for PVA film. Transmittance measurements: data was obtained using a Jasco U-770 or an Agilent Cary 60 spectrophotometers. The temperature of the samples was controlled with a Peltier thermostated cell holder, with an external air heating gun (output air temperature of 55 °C), or with a custom-made holder (Sapphire 360) in which the sample of interest was kept between two sapphire windows attached to two cupper sheets, which were connected to a temperature controller. Differential scanning calorimetry measurements: data was obtained using a TA-instruments Q20. A temperature ramp rate of 10 °C min-1 was used for all the samples. Sample irradiation: Irradiation was performed with: (a) a cw laser (irradiation wavelength 830 nm), whose power was modulated using different neutral density filtersand measured with a potentiometer; (b) a solar simulator (100 mW cm-2) placed at 23 cm from the tested material, whose irradiation power was measured with a potenciometer; or (c) sunlight. Temperature measurements on samples: Temperatures were measured with: (a) a thermocouple; or (b)a thermal IR probe. Voltage application to samples: The voltage was applied by means of a power supplier and both the voltage and the current were displaid in the power supplier screen. Electron microscopy data: TEM images were acquired with a TEM JEM-1400 (120 kV) microscope. SEM images were acquired with a FEI Quanta 650 ESEM microscope applying a 5 kV voltage. Size histograms were obtained from the microscopy images using ImageJ software. Stress-strain curves: The tensile test of the films was conducted by means of an Instron 3366 instrument at a speed of 25 mm min-1 and the specimens used had a thickness of 0.2 mm and a width of 15 mm., The dataset shows the experimental data provided in the main text and supporting information of the article "Multistimuli-responsive smart windows based on paraffin-polymer composites": thermal variation of refractive index, thermal and time variation of transmission spectra, electron microscopy images, differential scanning calorymetry thermograms, variation of transmission spectra with light irradiation and voltage application, temperature variation into house models upon sunlight irradiation., Funding sources: Funding agency: MINECO/FEDER. Project number: (RTI2018-098027-B-C21, PID2019-106171RB-I00 and PDC2022-133368-I00). Funding agency: Generalitat de Catalunya. Project number: 2017 SGR00465 and 2021 PROD 00190, Fig 2 Folder, Fig 3 folder, Fig 5 folder, Fig 6 folder, Fig 7 folder, Supporting information folder, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light phase modulation with transparent paraffin-based phase change materials

  • Otaegui, Jaume R.
  • Bertschy, Yannick
  • Vallan, Lorenzo
  • Schmidt, Falko
  • Vasista, Adarsh
  • Garcia-Guirado, Jose
  • Roscini, Claudio
  • Quidant, Romain
  • Hernando, Jordi
Phase change materials (PCM) have greatly contributed to optics with applications ranging from rewritable memories to smart windows. This is possible thanks to the variation in optical properties that PCMs undergo upon thermally-induced phase change. However, this behavior is accompanied by a loss of optical transparency in one (or more) of their phases, posing a major limitation for transmission-based functionalities. Here this challenge is addressed by producing PCM-based composites that remain transparent in the visible spectrum during their phase transition. The cornerstone of this innovative material is the use of 30 nm-in-size nanoparticles of paraffin as PCMs, which minimizes the scattering within the polymer host matrix regardless of the paraffin's phase. To demonstrate the potential of this approach, it is shown that thin composite layers can modulate the phase of the incident visible light using temperature, achieving uniform phase profiles with maximum phase shifts up to π radians. Notably, the composites studied exhibit up to threefold larger phase changes for the same input power over reference thermo-optical materials like polydimethylsiloxane. These findings position paraffin-based composites as promising materials for various thermo-optical applications, including wavefront shaping and aberration correction, with the potential to significantly impact a variety of optical technologies., The authors acknowledge the funding from MCIU/AEI/10.13039/501100011033 and ERDF – “A way of making Europe” through grants PID2021-127983OB-C21 and PDC2022-133368-I00, from Generalitat de Catalunya (AGAUR) through projects 2021 PROD 00190 and 2021 SGR 00064), and from the Swiss National Science Foundation (SNSF) through grant PROFIT (205936). The ICN2 is supported by the Severo Ochoa Centers of Excellence program, Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033. J.R.O. thanks the Generalitat de Catalunya (AGAUR) for his predoctoral FI fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cost-Effective Paraffin Particles-Based Thermochromic Composites for Smart Windows and Greenhouses

  • Vallan, Lorenzo
  • Otaegui, Jaume R.
  • Ruiz Molina, Daniel
  • Hernando, Jordi
  • Roscini, Claudio
This study presents low-cost, high-performing, and long-lasting scattering-based thermochromic composites for light transmittance and thermal management, which are based on poly(vinyl alcohol) films embedding paraffin micro/nanoparticles. The thermoresponsive behavior relies on matching (transparent state)/mismatching (opaque state) of the refractive index of the polymer matrix with that of the micro/nanoparticles in their solid/liquid state. The fine control of the paraffin particle composition and size, of the crystalline phase at the micro/nanoscale, and of the preparation process, permits accomplishing coatings manifesting high luminous transmittance in the nonactivated state (%T<inf>lum</inf> = 77.3%), strong light modulation (ΔT<inf>solar</inf> = 58.6%, ΔT<inf>NIR</inf> = 45.0%), and thermal self-regulation capabilities. These features, combined with their excellent photostability and water resistance, position the composites among the best performing dye-free thermotropic coatings reported so far. Besides, the introduction of graphene oxide as a photothermal agent in the polymer turns it photoresponsive. Noticeably, these coatings are prepared through a straightforward, low-energy, sustainable, and scalable blade technique, allowing precise control over the material properties onto various substrates, including flexible and adhesive poly(ethylene terephthalate), and glass. This allows obtaining different prototypes demonstrating their adaptability and potential for real-world applications, such as energy-saving smart windows, greenhouses, and adhesive films, applied to real train windows., This work was supported by PID2021-127983OB-C21, TED2021-131709B-I00, and PDC2022-133368-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF—“A way of making Europe.” L.V. thanks the Generalitat de Catalunya (AGAUR) for the Producte 2021 PROD 00190 project. ICN2 acknowledges support from the Severo Ochoa Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033 and the CERCA program (Generalitat de Catalunya). U.A.B. thanks the support from the Generalitat de Catalunya (AGAUR) through project 2021 SGR 00064. ICN2 and U.A.B. acknowledge “Ferrocarrils de la Generalitat de Catalunya” and the “Vagó de la Ciència” project for the opportunity to install adhesive films on train wagons. ICN2 Instrumentation Unit is acknowledged for the modifications applied on the greenhouse. J.H. is a Serra Húnter fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Weather-Resistant Thermoresponsive UV-Curable Smart Window Composites Based on Paraffin Particles

  • Villabona, Marc
  • Vallan, Lorenzo
  • Ruiz Molina, Daniel
  • Roscini, Claudio
  • Hernando, Jordi
Thermoresponsive composites made from phase change material particles embedded in polymer matrices show great promise for regulating sunlight transmittance in smart windows. However, their current performance is hindered by critical limitations. Composites obtained from water-soluble matrices present excellent optical performance, but they exhibit intrinsic poor weathering resistance, as they swell and dissolve upon water exposure (e.g., during rainfall or cleaning with aqueous solutions). In contrast, those prepared from water-resistant curable polymers typically require expensive or custom-made phase change materials, and very often show undesired optical properties (e.g., opaque states at room temperature or below). To address this challenge, in this work we developed novel thermoresponsive composite films comprising readily available paraffin particles dispersed within a cross-linked, water-insoluble acrylate matrix. The resulting materials exhibit excellent resistance to water while preserving the characteristic smart window behavior of paraffin-polymer composites; i.e., they remain transparent at low temperatures due to refractive index matching between the matrix and the solid paraffin particles, and become opaque once this condition is lost upon thermally induced paraffin melting, enabling efficient modulation of solar heating gain. In addition, because paraffin-acrylate films are produced via photopolymerization, they are obtained in a fast, straightforward and scalable manner. These features, combined with their low cost, mechanical flexibility, and multistimuli-responsive behavior, make paraffin-acrylate composites a robust and scalable platform for next-generation smart window technologies., This work was supported by PDC2022-133368-I00 and TED2021-131709B–I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF─“A way of making Europe.” L.V. thanks the Generalitat de Catalunya (AGAUR) for the Producte 2021 PROD 00190 project and the Beatriu de Pinós grant 2022 BP 00070. ICN2 acknowledges support from the Severo Ochoa Grant CEX2021-001214-S, funded by MICIU/AEI/10.13039.501100011033 and the CERCA program (Generalitat de Catalunya). UAB thanks the support from the Generalitat de Catalunya (AGAUR) through project 2021 SGR 00064. J.H. is a Serra Húnter fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multistimuli-responsive smart windows based on paraffin-polymer composites

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Roscini, Claudio|||0000-0002-0157-8934
Despite their potential to reduce energy consumption in buildings and increase user's comfort, the general application of smart windows is currently hampered by economic and technological factors. To overcome these limitations, herein we report a new strategy for the fabrication of thermoresponsive smart windows based on polymer films loaded with paraffin nanoparticles. Proper selection of these components allows refractive index matching when the paraffin nanoparticles are in their solid state - i.e., high visible and near-infrared light transparency -, which is lost after melting, thereby resulting in pronounced light scattering - i.e., opacity. As a result, these films show ample modulation of sunlight transmittance upon heating, while additionally exhibiting other advantageous features: facile preparation from low-cost materials; high photostability, flexibility and scalability; and fine tunability of their thermal response. Moreover, by deposition onto transparent electrodes or incorporation of nanostructured photothermal agents, the solar transmittance modulation of our paraffin-polymer composites can also be triggered with low voltages - i.e., to warrant user's control - or sunlight absorption - i.e., to improve self-adaptation to ambient conditions. Actually, films with combined thermal and photothermal activity allow high sunlight transmission in cold weather while efficiently reducing solar heat gain indoors in sunny hot days.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Light Phase Modulation with Transparent Paraffin-Based Phase Change Materials

  • Otaegui, Jaume Ramon|||0000-0002-9596-8625
  • Bertschy, Yannick
  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Schmidt, Falko|||0000-0002-2041-4572
  • Vasista, Adarsh|||0000-0001-7641-8647
  • Garcia-Guirado, Jose|||0000-0003-4574-4356
  • Roscini, Claudio|||0000-0002-0157-8934
  • Quidant, Romain|||0000-0001-8995-8976
  • Hernando, Jordi|||0000-0002-1126-4138
Phase change materials (PCM) have greatly contributed to optics with applications ranging from rewritable memories to smart windows. This is possible thanks to the variation in optical properties that PCMs undergo upon thermally-induced phase change. However, this behavior is accompanied by a loss of optical transparency in one (or more) of their phases, posing a major limitation for transmission-based functionalities. Here this challenge is addressed by producing PCM-based composites that remain transparent in the visible spectrum during their phase transition. The cornerstone of this innovative material is the use of 30 nm-in-size nanoparticles of paraffin as PCMs, which minimizes the scattering within the polymer host matrix regardless of the paraffin's phase. To demonstrate the potential of this approach, it is shown that thin composite layers can modulate the phase of the incident visible light using temperature, achieving uniform phase profiles with maximum phase shifts up to π radians. Notably, the composites studied exhibit up to threefold larger phase changes for the same input power over reference thermo-optical materials like polydimethylsiloxane. These findings position paraffin-based composites as promising materials for various thermo-optical applications, including wavefront shaping and aberration correction, with the potential to significantly impact a variety of optical technologies.