Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Comprehensive characterisation of a low-frequency-vibration energy harvester

  • Plaza Puértolas, Aitor
  • Iriarte Goñi, Xabier
  • Castellano Aldave, Jesús Carlos
  • Carlosena García, Alfonso
In this paper, we describe a measurement procedure to fully characterise a novel vibration energy harvester operating in the ultra-low-frequency range. The procedure, which is more thorough than those usually found in the literature, comprises three main stages: modelling, experimental characterisation and parameter identification. Modelling is accomplished in two alternative ways, a physical model (white box) and a mixed one (black box), which model the magnetic interaction via Fourier series. The experimental measurements include not only the input (acceleration)–output (energy) response but also the (internal) dynamic behaviour of the system, making use of a synchronised image processing and signal acquisition system. The identification procedure, based on maximum likelihood, estimates all the relevant parameters to characterise the system to simulate its behaviour and helps to optimise its performance. While the method is custom-designed for a particular harvester, the comprehensive approach and most of its procedures can be applied to similar harvesters., This work has been supported by the Spanish Research Agency, and the EU/PTR Next Generation Funds under grants PID2019-107258RB-C32 and TED2021-131052B-C21, and also by the Government of Spain (Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023) under grants PID2022-138491OB-C32 and PDC 2023-145876-C22.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Dataset for the identification of a ultra-low frequency multidirectional energy harvester for wind turbines

  • Bacaicoa Díaz, Julen
  • Hualde Otamendi, Mikel
  • Merino Olagüe, Mikel
  • Plaza Puértolas, Aitor
  • Iriarte Goñi, Xabier
  • Castellano Aldave, Jesús Carlos
  • Carlosena García, Alfonso
This paper presents a publicly available dataset designed to support the identification (characterization) and performance optimization of an ultra-low-frequency multidirectional vibration energy harvester. The dataset includes detailed measurements from experiments performed to fully characterize its dynamic behaviour. The experimental data encompasses both input (acceleration)-output (energy) relationships, as well as internal system dynamics, measured using a synchronized image processing and signal acquisition system. In addition to the raw input-output data, the dataset also provides post-processed information, such as the angular positions of the moving masses, their velocities and accelerations, derived from recorded high-speed videos at 240 Hz. The dataset also includes the measured power output generated in the coils. This dataset is intended to enable further research on vibration energy harvesters by providing experimental data for identification, model validation, and performance optimization, particularly in the context of energy harvesting in low-frequency and multidirectional environments, such as those encountered in wind turbines., This paper has been supported by the Public University of Navarre under grant PJUPNA2024-11690, and also by the Spanish Research Agency under grants PDC2023-145876-C22, PID2022-138510OB-C21, TED2021-131052B-C2.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Hybrid modelling and identification of mechanical systems using Physics-Enhanced Machine Learning

  • Merino Olagüe, Mikel
  • Iriarte Goñi, Xabier
  • Castellano Aldave, Jesús Carlos
  • Plaza Puértolas, Aitor
Obtaining mathematical models for mechanical systems is a key subject in engineering. These models are essential for calculation, simulation and design tasks, and they are usually obtained from physical principles or by fitting a black-box parametric input-output model to experimental data. However, both methodologies have some limitations: physics based models may not take some phenomena into account and black-box models are complicated to interpretate. In this work, we develop a novel methodology based on discrepancy modelling, which combines physical principles with neural networks to model mechanical systems with partially unknown or unmodelled physics. Two different mechanical systems with partially unknown dynamics are successfully modelled and the values of their physical parameters are obtained. Furthermore, the obtained models enable numerical integration for future state prediction, linearization and the possibility of varying the values of the physical parameters. The results show how a hybrid methodology provides accurate and interpretable models for mechanical systems when some physical information is missing. In essence, the presented methodology is a tool to obtain better mathematical models, which could be used for analysis, simulation and design tasks., This paper has been supported by the Public University of Navarre under grant PJUPNA2024-11690, and also by the Spanish Research Agency under grants PDC2023-145876-C22, PID2022-138510OB-C21, TED2021-131052B-C21. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Design and implementation of novel structural health monitoring algorithms for wind turbines on sensor nodes, Diseño e implementación del algoritmos novedosos de monitorización de la salud estructural de aerogeneradores sobre nodos sensores electrónicos

  • Vilella San Martín, Íñigo
El progresivo envejecimiento de los parques eólicos, junto con la creciente necesidad de estrategias de extensión de vida útil que sean seguras y económicamente viables, ha intensificado la demanda de soluciones de monitorización de la salud estructural capaces de operar en condiciones reales. En este contexto, la presente tesis doctoral aborda una de las principales limitaciones de la monitorización basada en vibraciones en aerogeneradores en funcionamiento: la dificultad de extraer información estructural fiable directamente en el propio aerogenerador, en condiciones de operación y sin recurrir a postprocesado offline, en presencia de armónicos rotacionales, excitación no estacionaria y recursos computacionales limitados. Para ello, la tesis propone un marco integrado para la monitorización de la salud estructural de aerogeneradores de manera online, en tiempo real y con bajo coste computacional, con especial énfasis en su implementación sobre nodos sensóricos embebidos autónomos. Una primera contribución de este trabajo consiste en el desarrollo de un marco de modelado no estacionario de señales que permite estimar conjuntamente los modos de vibración estructural y las componentes armónicas de origen rotacional. A diferencia de los enfoques convencionales, en los que los armónicos se tratan como perturbaciones que deben eliminarse antes del análisis modal, la metodologı́a propuesta modela ambos fenómenos de forma simultánea, permitiendo una separación más robusta entre los efectos estructurales y los rotacionales bajo condiciones operativas. Esta formulación permite descomponer un problema de múltiples grados de libertad en varias respuestas modales de un solo grado de libertad, facilitando ası́ la posterior estimación de los parámetros modales. Sobre la base de este marco, la tesis presenta una metodologı́a eficiente para la estimación online de parámetros modales, en particular frecuencias naturales y coeficientes de amortiguamiento. Se presta especial atención a la estimación del amortiguamiento, que sigue siendo uno de los aspectos más complejos del análisis modal operacional en aerogeneradores. Mediante la combinación de estrategias recursivas de procesado de señal con técnicas como Random Decrement, Ibrahim Time Domain y filtros de Kalman lineales en cascada, el enfoque propuesto logra estimaciones precisas y robustas, manteniendo una eficiencia computacional compatible con su implementación embebida en tiempo real. Otra contribución adicional relevante radica en el desarrollo de técnicas de procesado sı́ncrono basadas en la posición angular del rotor. La tesis introduce un algoritmo de estimación del ángulo de azimut en tiempo real basado exclusivamente en medidas inerciales, evitando la necesidad de encoders externos o señales SCADA. Además, se propone una metodologı́a para transformar las medidas adquiridas en un sistema de referencia giratorio en señales equivalentes expresadas en un sistema de referencia fijo, lo que permite aplicar herramientas convencionales de análisis modal operacional a sensores instalados en componentes giratorios como el buje. Esto amplı́a de forma significativa la capacidad de monitorización componentes giratorios crı́ticos, incluyendo las palas y los elementos asociados al sistema de pitch. Las metodologı́as propuestas han sido validadas tanto mediante señales sintéticas generadas con OpenFAST como mediante medidas reales adquiridas en aerogeneradores en operación. Su viabilidad práctica se ha demostrado adicionalmente mediante su implementación en prototipos instalados en aerogeneradores reales. Por último, la transferencia del marco desarrollado a sistemas de seguimiento solar confirma su adaptabilidad y su relevancia industrial en un ámbito más amplio. En conjunto, esta tesis aporta una contribución original y susceptible de aplicación práctica en el campo de la monitorización de la salud estructural, tendiendo un puente entre el análisis modal operacional avanzado y el desarrollo de soluciones industriales escalables para infraestructuras energéticas complejas., Parke eolikoak progresiboki zahartzen ari dira, eta bizi-zikloa luzatzeko ekonomikoki bideragarri eta seguruak diren estrategiak behar dira. Honen ondorioz, benetako funtzionamendu-baldintzetan jarduteko gai diren egituraosasunaren monitorizaziorako soluzioen eskaria handitu egin da. Testuinguru horretan, doktorego-tesi honek martxan dauden aerosorgailuen bibrazioetan oinarritutako monitorizazioaren muga nagusietako bat jorratzen du: aerosorgailuan bertan, zuzenean, egiturari buruzko informazio fidagarria ateratzeko zailtasuna; funtzionamendu-baldintzetan eta offline postprozesatura jo gabe, errotazioharmonikoak, eszitazio ez-geldikorra eta konputazio-baliabide mugatuak daudenean. Horretarako, doktorego-tesi honek aerosorgailuen egitura-osasuna online monitorizatzeko esparru integratu bat proposatzen du, denbora errealean eta kostu konputazional baxuarekin, arreta berezia jarriz nodo sentsoriko autonomoetan. Lan honen lehen ekarpen nagusietako bat seinaleen modelatze ez-estazionariorako esparru baten garapena da. Esparru horrek egiturazko bibrazio-moduak eta jatorri birakariko osagai harmonikoak batera estimatzea ahalbidetzen du. Ohiko ikuspegietan ez bezala, non harmonikoak analisi modala egin aurretik kendu beharreko perturbazio gisa hartzen diren, proposatutako metodologiak bi fenomenoak aldi berean modelatzen ditu, egiturazko efektuen eta errotazionalen arteko bereizketa sendoagoa ahalbidetuz baldintza operatiboetan. Gainera, formulazio honek askatasun-gradu anitzeko problema bat askatasun-gradu bakarreko hainbat erantzun modaletan deskonposatzeko aukera ematen du, eta horrek parametro modalen ondorengo estimazioa errazten du. Esparru horretatik abiatuta, tesiak parametro modalak online estimatzeko metodologia eraginkor bat aurkezten du, bereziki maiztasun naturalak eta amortiguamendu-koefizienteak lortzera bideratua. Arreta berezia eskaintzen zaio amortiguamenduaren estimazioari, aerosorgailuetako analisi modal operazionalaren alderdirik konplexuenetako bat baita oraindik ere. Seinalearen prozesamendu errekurtsiboko estrategiak Random Decrement, Ibrahim Time Domain eta ur-jauzian antolatutako Kalman iragazki linealekin uztartuz, proposatutako ikuspegiak estimazio zehatzak eta sendoak lortzen ditu. Aldi berean, denbora errealean txertatutako inplementazioarekin bateragarria den eraginkortasun konputazionala mantentzen du. Tesiaren beste ekarpen garrantzitsu bat errotorearen posizio angeluarrean oinarritutako prozesamendu sinkronoaren tekniken garapena da. Horren barruan, azimut-angelua denbora errealean estimatzeko algoritmo bat aurkezten da, soilik neurketa inertzialetan oinarritua. Ondorioz, kanpoko encoderren edo SCADA seinaleen beharra saihesten da. Era berean, erreferentzia-sistema birakari edo errotazio batean hartutako neurketak erreferentzia-sistema finko batean adierazitako seinale baliokide bihurtzeko metodologia bat proposatzen da. Horri esker, analisi modal operazionaleko ohiko tresnak aplika dakizkieke bujea bezalako osagai birakarietan instalatutako sentsoreei. Horrela, monitorizazio-gaitasuna nabarmen hedatzen da osagai birakari kritikoetara, hala nola paletara eta pitch sistemari lotutako elementuetara. Proposatutako metodologiak baliozkotu dira bai OpenFAST bidez sortutako seinale sintetikoekin, bai funtzionamenduan dauden aerosorgailuetatik jasotako benetako neurketekin. Haien bideragarritasun praktikoa, gainera, aerosorgailu errealetan instalatutako prototipoetan egindako inplementazioaren bidez frogatu da. Azkenik, garatutako esparrua eguzki-jarraipeneko sistemetara eramateak berresten du haren moldagarritasuna eta industria-mailako garrantzia esparru zabalago batean. Oro har, tesi honek ekarpen original eta aplikagarri bat egiten dio egitura-osasunaren monitorizazioaren arloari, analisi modal operazional aurreratuaren eta energiaazpiegitura konplexuetarako soluzio industrial eskalagarriak garatzearen arteko lotura sendotuz., The progressive ageing of wind turbine fleets, together with the increasing need for safe and economically viable life-extension strategies, has intensified the demand for structural health monitoring solutions capable of operating under real conditions. In this context, this doctoral thesis addresses one of the main limitations of vibration-based monitoring in operating wind turbines: the difficulty of extracting reliable structural information directly on the turbine, under operational conditions and without relying on offline post-processing, in the presence of rotational harmonics, non-stationary excitation, and constrained computational resources. The thesis proposes an integrated framework for online, real-time, lowcomputational- cost structural health monitoring of wind turbines, with special emphasis on its implementation in autonomous embedded sensor nodes. A first contribution of the work is the development of a non-stationary signal modelling framework that jointly estimates structural vibration modes and rotational harmonic components. Unlike conventional approaches, in which harmonics are treated as disturbances to be removed prior to modal analysis, the proposed methodology models both phenomena simultaneously, enabling a more robust separation between structural and rotational effects under operational conditions. This formulation allows the decomposition of a multi-degree-of-freedom problem into several single-degree-of-freedom modal responses, thereby facilitating subsequent modal parameter estimation. Building upon this framework, the thesis presents an efficient methodology for the online estimation of modal parameters, particularly natural frequencies and damping ratios. Special attention is devoted to damping estimation, which remains one of the most challenging aspects of operational modal analysis in wind turbines. By combining recursive signal processing strategies with techniques such as Random Decrement, Ibrahim Time Domain analysis, and cascaded linear Kalman filters, the proposed approach achieves accurate and robust estimation while maintaining computational efficiency compatible with real-time embedded implementation. A further contribution lies in the development of synchronous processing techniques based on the rotor angular position. The thesis introduces a real-time azimuth estimation algorithm based exclusively on inertial measurements, avoiding the need for external encoders or SCADA signals. In addition, a methodology is proposed to transform measurements acquired in a rotating reference frame into equivalent fixed-frame signals, enabling the application of conventional operational modal analysis tools to sensors installed on rotating components such as the hub. This significantly expands the monitoring capability towards critical rotating subsystems, including blades and pitch-related elements. The proposed methodologies have been validated using both synthetic signals generated with OpenFAST and real measurements acquired from operating wind turbines. Their practical feasibility has been further demonstrated through implementation on prototypes installed in real wind turbines. Finally, the transfer of the developed framework to solar tracking systems confirms its adaptability and broader industrial relevance. Overall, this thesis provides an original and practically deployable contribution to structural health monitoring, bridging the gap between advanced operational modal analysis and scalable industrial solutions for complex energy infrastructures., The Government of Navarre has funded the recruitment of the doctoral candidate, Iñigo Vilella San Martı́n, within the framework of the “Programa Doctorados Industriales 2021” and the “Prórrogas 2024 Doctorados Industriales” call. This doctoral thesis was also developed within a broader research environment supported by several competitive research projects related to structural health monitoring and low-cost autonomous monitoring systems, including: “Sistema IoT autoalimentado y sin mantenimiento para monitorización de salud estructural” (PID2019-107258RB-C32), “Autonomous low-cost and digital monitoring of electrical generation and distribution infrastructure” (TED2021-131052B-C21), “Sistema IoT autónomo de monitorización de salud estructural de aerogeneradores” (PID2022-138510OB-C21), and “IoT NanoNodes para Monitorización de Salud Estructural” (PDC2023-145876-C22)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables, Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa Ofiziala