Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Integrated risk assessment for robustness evaluation and resilience optimisation of power systems after cascading failures

  • Beyza, Jesus
  • Yusta, Jose M.
Power systems face failures, attacks and natural disasters on a daily basis, making robustness and resilience an important topic. In an electrical network, robustness is a network’s ability to withstand and fully operate under the effects of failures, while resilience is the ability to rapidly recover from such disruptive events and adapt its structure to mitigate the impact of similar events in the future. This paper presents an integrated framework for jointly assessing these concepts using two complementary algorithms. The robustness model, which is based on a cascading failure algorithm, quantifies the degradation of the power network due to a cascading event, incorporating the circuit breaker protection mechanisms of the power lines. The resilience model is posed as a mixed-integer optimisation problem and uses the previous disintegration state to determine both the optimal dispatch and topology at each restoration stage. To demonstrate the applicability of the proposed framework, the IEEE 118-bus test network is used as a case study. Analyses of the impact of variations in both generation and load are provided for 10 simulation scenarios to illustrate different network operating conditions. The results indicate that a network’s recovery could be related to the overload capacity of the power lines. In other words, a power system with high overload capacity can withstand higher operational stresses, which is related to increased robustness and a faster recovery process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal cooperative model for the security of gas supply on European gas networks

  • Yusta, Jose M
  • Beyza Bravo, Jesus
Natural gas infrastructures play a key role in the transition towards the new energy model, with a high share of renewable energies, both ensuring the firm capacity of electric power systems and integrating all energy vectors. The European Union (EU) strongly depends on external natural gas suppliers and is thus particularly vulnerable. In the event of supply problems due to natural phenomena, technical failures or other threats, cooperation between EU countries would be essential to best solve a supply crisis. This study proposes an EU cooperative model to meet the gas demand over a fourteen-day crisis, using a mathematical optimisation approach for resources and infrastructure. The model considers the dynamic management of underground gas storage facilities, limiting daily withdrawal based on the amount of working gas available in each storage facility. The ability of the model to make quick decisions is illustrated in six gas-demand case studies of the European cold wave in January 2017 and hypothetical supply disruptions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low-cost variable-speed wind turbines design by recycling small electrical machines. Arrangement of permanent magnets in the rotor

  • Ballestín-Bernad, V.
  • Artal-Sevil, J.
  • Domínguez-Navarro, J. A.
  • Bernal-Agustín, J. L.
This paper describes the design of low-cost variable-speed wind turbines by recycling small electrical machines. In this way, electrical machines such as automobile claw-pole alternators, induction motors for domestic applications, or simply electric motors for some industrial applications are studied, considering their reuse as permanent magnet synchronous generators (PMSG) in small wind turbines or hydro-power turbines. The main purpose is the integration of hybrid energy conversion systems (wind and hydraulic turbines) in small stand-alone microgrids within the rural environment. Likewise, in order to optimize the design, the arrangement of the permanent magnets in the rotor is analyzed. The analysis has been carried out using the FluxMotor simulation software, which is based on the 2D finite element method. At the same time, the FEM software provides a lot of information about the optimization of the electrical machine and its multiple design options and topologies. Suggested designs have similar performance as well as a similar size and weight. The purpose has been to explore different topologies and select the most efficient designs. In this way, it is shown that it is possible to reuse an electrical generator easily, without losing much of the general performance. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal Operation of a Distributed Generation Microgrid based on the Multi-Objective Genetic Algorithms

  • Oviedo-Carranza, S.
  • Artal-Sevil, J.
  • Domínguez-Navarro, J. A.
This document describes the application of multi-objective genetic algorithms as techniques and tools to optimize generation and distribution in small microgrids. In this way, genetic algorithms have been used for the allocation of distributed generation to reduce losses and improve the voltage profile. The IEEE14 network has been taken as a study and analysis model. This smart grid has 14 nodes and integrates several generation units, both conventional and renewable, transformers, and multiple loads. In this way, a multi-objective metaheuristic algorithm is proposed with the purpose of planning the power distribution grid based on a series of conditions such as the optimal generation configuration, the minimization of power losses in the lines, power transfer capacity, the reduction of CO2 emissions, and the optimization of the benefits obtained in renewable generation. The overall purpose is the development of an intelligent microgrid management system that is capable of determining the optimal configuration, by estimating demand, energy costs, and operating costs. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ocean Wave Energy Converters: Analysis, Modeling, and Simulation. Some case studies

  • El-Shalakany, H.
  • Artal-Sevil, J.
  • Ballestín-Bernad, V.
  • Domínguez-Navarro, J. A.
Wave energy has much more potential and benefits than other forms of renewable energy. It is more predictable, consistent, and controllable than wind or solar energy. In this way, an adequate infrastructure can be an alternative and also sustainable system for power supply. In this paper, different wave energy conversion mechanisms (buoys, Pelamis, and oysters) have been described. These models are implemented and simulated using the Design Modeller, ANSYS-AQWA, and WEC-SIM applications. The purpose has been to develop a complete simulation of the wave energy converter and discuss its operation. The analysis has been developed in Matlab-Simulink and both regular and irregular waves have been considered. For this, an approximation to the linear waves theory has been used. The results obtained indicate the energy absorbed from the sea waves and also the energy supplied to the power grid. The simulation results estimated with the different WEC models are comparable to the results shown by other research papers. © 2022, European Association for the Development of Renewable Energy, Environment and Power Quality (EA4EPQ). All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Power flow analysis via typed graph neural networks

  • Lopez Garcia, Tania B.
  • Domínguez Navarro, José A.
Power flow analyses are essential for the correct operation of power grids, however, electricity systems are becoming increasingly complex to analyze with the conventional numerical methods. The present work proposes a typed graph neural network based approach to solve the power flow problem. The neural networks are trained on benchmark power grid cases which are modified by varying the injections (load and generation), branch characteristics and topology. The solution to the power flow analysis is found when all voltage values are known. The proposed system infers the voltage magnitude and phase and is trained so that the obtained values minimize the violation of the physical laws that govern the system, this way the training is achieved in an unsupervised manner. The proposed solver has linear time complexity and is able to generalize to grids with considerably different conditions, including size, from the grids available during training. Though the training is unsupervised and does not suppose any ground truth data, the solutions obtained are found to have a close correlation with the conventional Newton–Raphson method. The results are additionally validated by finding the root mean square deviation from the Newton–Raphson method, and the faster, though less accurate, DC approximation method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Technical versus socio-economic and environmental criteria in power transmission projects

  • Naval, N.
  • Yusta, J.M.
In recent years, the efforts of countries to reach agreements on the development of cross-border electricity interconnection have intensified because they optimize energy resources and constitute the most significant instantaneous support for the security and continuity of electricity supply. In addition, interconnections play a key role in the integration of electricity markets. However, the planning of European electricity infrastructures constitutes complex analyses due to the large number of factors involved. This article applies a multicriteria methodology for the evaluation and prioritization of cross-border interconnection projects with the simulation of different scenarios, in total 12 scenarios, to study the effect of changes in the selected criteria on the results obtained. To test the defined methodology, the variation in the weight of different criteria in the assessment of a new cross-border electrical interconnection project between Spain and France is studied. It was verified that the tool is coherent and that the analysis developed improves the understanding of such large and complex projects and can facilitate the prioritization of project portfolios with a clear and explicit method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Assessment of cross-border electricity interconnection projects using a MCDA method

  • Naval, Natalia
  • Yusta, Jose M.
The European Union is promoting cross-border electricity interconnection projects to achieve energy objectives, reduce the current fragmented European market, and eradicate the isolation of the most disadvantaged areas. However, selecting these projects is a complex task because there are multiple objectives, criteria, participants and alternatives involved. This paper aims to develop a multi-criteria decision analysis (MCDA) method for appropriately assessing and prioritizing cross-border electricity interconnection projects considering technical, economic, environmental and social criteria. Additionally, this work analyzes interconnection effects on the resilience of interconnected power systems. To verify its validity, this method is applied to prioritize new Spain-France interconnection infrastructure projects. From the results obtained, the technical and environmental criteria have proven to be the most important, since cross-border electricity interconnection projects are aimed at better market-coupling, less congestion and higher reliability while minimizing environmental impacts. In short, the proposed methodology provides a comprehensive view of the impact of these projects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal Power Flow With Physics-Informed Typed Graph Neural Networks

  • Lopez-Garcia, Tania B.
  • Domínguez-Navarro, José Antonio
This work describes a new way to solve the optimal power flow problem applying typed graph neural networks. Typed graph neural networks allow the representation of different elements of transmission systems with different types of nodes, thus adding accuracy and interpretability to the solutions obtained, in comparison to results obtained with conventional feed-forward neural network models. The proposed graph neural network architecture is trained without the need of training data, through a physics informed loss function which incorporates not only the optimization objective, but also operational constraints of the physical system. Results are comparable with those obtained with the interior point method, and it is shown that the calculation time is greatly reduced.