Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Maximizing utilization and minimizing migration in thermal-aware energy-efficient real-time multiprocessor scheduling

  • Rubio-Anguiano, L.E.
  • Chils Trabanco, A.
  • Briz Velasco, J.L.
  • Ramírez-Trevino, A.
This work proposes CAlECs, a clustered scheduling system for MPSoCs subject to thermal and energy constraints. It calculates off-line a cyclic executive honoring temporal and thermal constraints, for a hard real-time (HRT) task set at minimum frequency to reduce consumed energy, minimizing context switches and migrations. It also provides an on-line controller able to manage system and task parametric variations and soft real-time (SRT) tasks, always meeting the HRT task set constraints and the system thermal bound. CAlECS maximizes CPU utilization to help avoid overprovisioning contributing to a low SWaP factor. Its modular design allows the utilization of different modeling and scheduling approaches, and makes the off-line and on-line components independent from each other to better suit the requirements of a specific system. We experimentally show that the cyclic executive provided by CAlECS for HRT task sets outperforms RUN, a reference off-line algorithm in terms of optimal number of context switches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analytical Model for Memory-Centric High Level Synthesis-Generated Applications

  • Dávila-Guzmán, María Angélica
  • Gran Tejero, Rubén
  • Villarroya-Gaudó, María
  • Suárez Gracia, Darío
High performance computing (HPC) demands huge memory bandwidth and computing resources to achieve maximum performance and energy efficiency. FPGAs can provide both, and with the help of High Level Synthesis, those HPC applications can be easily written in high level languages. However, the optimization process remains time-consuming, especially when based on trial-and-error bitstream generation. Model-based performance prediction is a practical and fast approach for kernel optimization, specially if done with information from pre-synthesis reports. This article presents an analytical model focused on memory intensive applications that captures the memory behavior and accurately predicts the kernel execution time within seconds rather than hours, as bitstream generation requires. The model has been validated with two DRAM technologies: DDR4 and HBM2, with a set of microbenchmarks and high performance computing applications showing an average error of 11% for DDR4 and 10% for HBM2. Compared with previous studies, our predictions at least halve the estimation error.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A novel approach for adapting the standard addition method to single particle-ICP-MS for the accurate determination of NP size and number concentration in complex matrices; 35414390

  • Aramendía, M.
  • García-Mesa, J. C.
  • Alonso, E. V.
  • Garde, R.
  • Bazo, A.
  • Resano, J.
  • Resano, M.
This paper presents a novel approach, based on the standard addition method, for overcoming the matrix effects that often hamper the accurate characterization of nanoparticles (NPs) in complex samples via single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). In this approach, calibration of the particle size is performed by two different methods: (i) by spiking a suspension of NPs standards of known size containing the analyte, or (ii) by spiking the sample with ionic standards; either way, the measured sensitivity is used in combination with the transport efficiency (TE) for sizing the NPs. Moreover, such transport efficiency can be readily obtained from the data obtained via both calibration methods mentioned above, so that the particle number concentration can also be determined. The addition of both ionic and NP standards can be performed on-line, by using a T-piece with two inlet lines of different dimensions. The smaller of the two is used for the standards, thus ensuring a constant and minimal sample dilution. As a result of the spiking of the samples, mixed histograms including the signal of the sample and that of the standards are obtained. However, the use of signal deconvolution approaches permits to extract the information, even in cases of signal populations overlapping. For proofing the concept, characterization of a 50 nm AuNPs suspension prepared in three different media (i.e., deionized water, 5% ethanol, and 2.5% tetramethyl ammonium hydroxide-TMAH) was carried out. Accurate results were obtained in all cases, in spite of the matrix effects detected in some media. Overall, the approach proposed offers flexibility, so it can be adapted to different situations, but it might be specially indicated for samples for which the matrix is not fully known and/or dilution is not possible/recommended. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Accounting for preemption and migration costs in the calculation of hard real-time cyclic executives for MPSoCs

  • Rubio-Anguiano, L.
  • Briz, J. L.
  • Ramirez-Trevino, A.
This work introduces a methodology to consider preemption and migration overhead in hard real-time cyclic executives on multicore architectures. The approach performs two iterative stages. The first stage takes a cyclic executive, from which the number and timing of all preemptions and migrations for every task is known. Then, it includes this overhead by updating the worst-case execution time (WCET) of the tasks. The second stage calculates a new cyclic executive considering the new WCET of tasks. The stages iterate until the preemption and migration overhead keeps constant. © 2016 IEEE.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bayesian neural networks to analyze hyperspectral datasets using uncertainty metrics

  • Alcolea, Adrián
  • Resano, Javier
Machine learning techniques, and specifically neural networks, have proved to be very useful tools for image classification tasks. Nevertheless, measuring the reliability of these networks and calibrating them accurately are very complex. This is even more complex in a field like hyperspectral imaging, where labeled data are scarce and difficult to generate. Bayesian neural networks (BNNs) allow to obtain uncertainty metrics related to the data processed (aleatoric), and to the uncertainty generated by the model selected (epistemic). On this work, we will demonstrate the utility of BNNs by analyzing the uncertainty metrics obtained by a BNN over five of the most used hyperspectral images datasets. In addition, we will illustrate how these metrics can be used for several practical applications such as identifying predictions that do not reach the required level of accuracy, detecting mislabeling in the dataset, or identifying when the predictions are affected by the increase of the level of noise in the input data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving the configuration of the predictable ACDC data cache for real-time systems

  • Segarra, J.
  • Marti-Campoy, A.
In real-time systems, analyzing the worst-case execution time (WCET) of a task in the presence of data caches is hard. The ACDC is a data cache that provides predictability, facilitating WCET analysis. It works by granting data cache replacement permission to specific load/store instructions. Nonetheless, knowing how to select these instructions to minimize the WCET, i.e., configuring the ACDC, is not trivial. In this paper, we propose four new methods to configure the ACDC, and compare them with existing methods. Unlike those in previous studies, our proposed methods provide specific ACDC configurations for the different phases of a given task, instead of a single ACDC configuration per task. We evaluate the WCET bounds obtained when using different ACDC configuration methods on the TACLeBench benchmark suite. Our results show that the most complex benchmarks work better with multiple-content configurations, which indicates that realistic tasks may also benefit from this kind of configuration. The methods proposed in this study improve the WCET in more than 60% of cases, with an average WCET improvement of nearly 5% and up to 50% in some cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Balancer: bandwidth allocation and cache partitioning for multicore processors

  • Navarro-Torres, Agustín
  • Alastruey-Benedé, Jesús
  • Ibáñez, Pablo
  • Viñals-Yúfera, Víctor
The management of shared resources in multicore processors is an open problem due to the continuous evolution of these systems. The trend toward increasing the number of cores and organizing them in clusters sets out new challenges not considered in previous works. In this paper, we characterize the use of the shared cache and memory bandwidth of an AMD Rome processor executing multiprogrammed workloads and propose several mechanisms that control the use of these resources to improve the system performance and fairness. Our control mechanisms require no hardware or operating system modifications. We evaluate Balancer on a real system running SPEC CPU2006 and CPU2017 applications. Balancer tuned for performance shows an average increase of 7.1% in system performance and an unfairness reduction of 18.6% with respect to a system without any control mechanism. Balancer tuned for fairness decreases the performance by 1.3% in exchange for a 64.5% reduction of unfairness.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Accurate and efficient constrained molecular dynamics of polymers using Newton's method and special purpose code

  • López-Villellas, L.
  • Kjelgaard Mikkelsen C. Ch.
  • Galano-Frutos, J. J.
  • Marco-Sola, S.
  • Alastruey-Benedé, J.
  • Ibáñez, P.
  • Moretó, M.
  • Sancho, J.
  • García-Risueño, P.
In molecular dynamics simulations we can often increase the time step by imposing constraints on bond lengths and bond angles. This allows us to extend the length of the time interval and therefore the range of physical phenomena that we can afford to simulate. We examine the existing algorithms and software for solving nonlinear constraint equations in parallel and we explain why it is necessary to advance the state-of-the-art. We present ILVES-PC, a new algorithm for imposing bond constraints on proteins accurately and efficiently. It solves the same system of differential algebraic equations as the celebrated SHAKE algorithm, but ILVES-PC solves the nonlinear constraint equations using Newton’s method rather than the nonlinear Gauss-Seidel method. Moreover, ILVES-PC solves the necessary linear systems using a specialized linear solver that exploits the structure of the protein. ILVES-PC can rapidly solve constraint equations as accurately as the hardware will allow. The run-time of ILVES-PC is proportional to the number of constraints. We have integrated ILVES-PC into GROMACS and simulated proteins of different sizes. Compared with SHAKE, we have achieved speedups of up to 4.9× in single-threaded executions and up to 76× in shared-memory multi-threaded executions. Moreover, ILVES-PC is more accurate than P-LINCS algorithm. Our work is a proof-of-concept of the utility of software designed specifically for the simulation of polymers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Porting and optimizing BWA-MEM2 using the Fujitsu A64FX processor

  • Langarita, Rubén
  • Armejach, Adrià
  • Ibáñez, Pablo
  • Alastruey-Benedé, Jesús
  • Moretó, Miquel
Sequence alignment pipelines for human genomes are an emerging workload that will dominate in the precision medicine field. BWA-MEM2 is a tool widely used in the scientific community to perform read mapping studies. In this paper, we port BWA-MEM2 to the AArch64 architecture using the ARMv8-A specification, and we compare the resulting version against an Intel Skylake system both in performance and in energy-to-solution. The porting effort entails numerous code modifications, since BWA-MEM2 implements certain kernels using x86 64 specific intrinsics, e.g., AVX-512. To adapt this code we use the recently introduced Arm’s Scalable Vector Extensions (SVE). More specifically, we use Fujitsu’s A64FX processor, the first to implement SVE. The A64FX powers the Fugaku Supercomputer that led the Top500 ranking from June 2020 to November 2021. After porting BWA-MEM2 we define and implement a number of optimizations to improve performance in the A64FX target architecture. We show that while the A64FX performance is lower than that of the Skylake system, A64FX delivers 11.6% better energy-to-solution on average. All the code used for this article is available at https://gitlab.bsc.es/rlangari/bwa-a64fx.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

PeRISCVcope: a tiny teaching-oriented RISC-V interpreter

  • Suárez Gracia, D.
  • Valero, A.
  • Gran Tejero, R.
  • Villarroya, M.
  • Viñals, V.
The fast advances of computer systems translate into a growing demand of methodologies and tools to introduce those novelties into classes. Among the plethora of those advances, virtualization has become an essential technology in almost every relevant system stack, from connected cars to hyperscaled cloud servers. However, introducing those technologies into the classroom remains a challenging task because of the huge complexity of their software components that may hinder the learning process of students. peRISCVcope aims to help in this area by proposing a tiny yet powerful interpreter to dig into virtualization technologies, such as the implementation of trap&emulate hypervisors. With less than 2,000 lines of code, and thanks to the conciseness of the RV32I base instruction set of RISC-V, peRISCVcope enables students to make virtualization knowledge their own. This paper presents our experiences developing and testing a virtualization laboratory where students implement parts of an interpreter. After the practical experience, peRISCVcope has been proved as a useful pedagogical tool, and, most importantly, students have positively rated the experience.