Skip to main content

OXIDACION SELECTIVA DE METANO E HIDROGENACION DE CO2 EN REACTORES CATALITICOS AVANZADOS

PID2019-106196RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Polymer–ceramic composite membranes for water removal in membrane reactors

  • Juárez, Ester
  • Lasobras Laguna, Javier
  • Soler, Jaime
  • Herguido, Javier
  • Menéndez, Miguel
Methanol can be obtained through CO2 hydrogenation in a membrane reactor with higher yield or lower pressure than in a conventional packed bed reactor. In this study, we explore a new kind of membrane with the potential suitability for such membrane reactors. Silicone–ceramic composite membranes are synthetized and characterized for their capability to selectively remove water from a mixture containing hydrogen, CO2, and water at temperatures typical for methanol synthesis. We show that this membrane can achieve selective permeation of water under such harsh conditions, and thus is an alternative candidate for use in membrane reactors for processes where water is one of the products and the yield is limited by thermodynamic equilibrium.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modifications in the composition of cuo/zno/al2o3 catalyst for the synthesis of methanol by co2 hydrogenation

  • Trifan, Bianca
  • Lasobras Laguna, Javier
  • Soler, Jaime
  • Herguido, Javier
  • Menéndez, Miguel
Renewable methanol, obtained from CO2 and hydrogen provided from renewable energy, was proposed to close the CO2 loop. In industry, methanol synthesis using the catalyst CuO/ZnO/Al2O3 occurs at a high pressure. We intend to make certain modification on the traditional catalyst to work at lower pressure, maintaining high selectivity. Therefore, three heterogeneous catalysts were synthesized by coprecipitation to improve the activity and the selectivity to methanol under mild conditions of temperature and pressure. Certain modifications on the traditional catalyst Cu/Zn/Al2O3 were employed such as the modification of the synthesis time and the addition of Pd as a dopant agent. The most efficient catalyst among those tested was a palladium-doped catalyst, 5% Pd/Cu/Zn/Al2O3. This had a selectivity of 64% at 210 °C and 5 bar.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Methanol to Gasoline (MTG): preparation, characterization and testing of HZSM-5 zeolite-based catalysts to be used in a fluidized bed reactor

  • Sanz-Martínez, A.
  • Lasobras, J.
  • Soler, J.
  • Herguido, J.
  • Menéndez, M.
The preparation of catalysts suitable for MTG processes in a fluidized bed reactor has been studied with emphasis on improving the textural, physico-chemical, morphological, structural and mechanical properties. A mixture of HZSM-5 zeolite (active material), boehmite or bentonite (binder) and alumina (inert filler) was used to prepare different catalysts. After preparation, characterization by physical adsorption of N2, XRF, XRD and SEM-EDX techniques was carried out. The screening of catalysts was performed in a fluidized bed reactor. The distribution of products was very similar in all cases, with the yield of light hydrocarbons always being higher than that of gasoline. Among the catalysts tested, the one containing boehmite as a binder (HZ_Boeh) was found as the most appropriate due to its high mechanical strength, high yield to aromatics and lower yield to durene.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Methanol to gasoline (MTG): Parametric study and validation of the process in a two-zone fluidized bed reactor (TZFBR)

  • Sanz-Martínez, A.
  • Lasobras, J.
  • Soler, J.
  • Herguido, J.
  • Menéndez, M.
Methanol to Gasoline (MTG) process transforms methanol to hydrocarbons within the boiling point range of gasoline. The result is a wide spectrum of products (olefins, paraffins, aromatics and naphthenics, among others), with the total conversion of methanol to hydrocarbons and water. Catalyst deactivation by coke is a main problem in this process. This work aims to determine the feasibility of carrying out the production of gasoline from methanol in a two-zone fluidized bed reactor (TZFBR). The hypothesis is that the formation of carbonaceous deposits (coke) on the catalyst particles can be counteracted by its combustion in the regeneration zone that this novel reactor presents, thus achieving stable and continuous operation. In this way, both processes (reaction and regeneration) would be being carried out simultaneously in the same reactor (process intensification). The comparison of results between a conventional fluidized bed reactor and a TZFBR shows that the second one actually provides a better stability over time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-high specific surface area spherical FePOx/SiO2 aerogel with excellent mechanical properties for the highly selective direct oxidation of CH4 to HCHO

  • Zhu, Kunmeng
  • Gao, Fuwei
  • Zhao, Zhiyang
  • Ren, Jian
  • Lasobras, Javier
  • Shen, Xiaodong
  • Cui, Sheng
  • Menéndez, Miguel
Silica aerogels, characterized by their high porosity and substantial specific surface area, are suitable for applications as catalysts or catalyst supports. The simultaneous attainment of a substantial specific surface area and robust mechanical properties in aerogel materials remains a formidable challenge in material synthesis. Spherical FePOx/SiO2 aerogel materials were synthesized employing a combination of heating reflux, the sol-gel technique, and supercritical ethanol drying. These composites demonstrate an exceptional specific surface area, uniformly dispersed active components, shape controllability, and superior mechanical strength. A noteworthy enhancement in both specific surface area (1175 m2/g) and compressive modulus (7.56 MPa) surpasses many findings reported in extant literature. Under conditions of a reaction temperature at 650°C and a flow rate of 97.5 mL/min, the HCHO selectivity and yield for 4 wt.% FePOx/SiO2 aerogel were 18.3 and 4.2 times, respectively, higher than those of 4 wt.% FePOx/SiO2 particles. These composites manifest significant selectivity towards the direct catalytic oxidation of CH4 to HCHO.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Preparation of polymeric-ceramic composite membranes for use in the methanol synthesis reaction

  • Elvira, I.
  • Lasobras, J.
  • Soler, J.
  • Herguido, J.
  • Menéndez, M.
A new kind of ceramic-polymeric membranes has been prepared and characterized towards its use in membrane reactors for synthesis of methanol from CO2 and hydrogen. In this way, PBI membranes were prepared on a ceramic support by varying parameters of the preparation process. The effect of those parameters on the separation of the compounds involved in the reaction was measured under conditions (temperature, pressure and gas composition) simulating those of the reaction. The prepared membranes were able to selectively remove water from a mixture containing hydrogen and CO2. H2O/CO2 and H2O/H2 separation factors over 18 and 12, respectively, were achieved at 160°C. The separation factors decreased by increasing the temperature with a 3-layer membrane but were quite stable with a 4-layer membrane.