Skip to main content

ULTRA-EFFICIENT MICRO-SCALE NEW GENERATION HYBRID CONCENTRATOR PHOTOVOLTAIC SYSTEMS

PID2019-106497RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE JAEN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Wide-bandgap III-V materials for high efficiency air and underwater optical photovoltaic power transmission

  • Sanmartín, Pablo
  • Almonacid, Florencia
  • Ceballos, María A.
  • García Loureiro, Antonio Jesús
  • Fernández, Eduardo F.
High-power optical transmission (HPOT) enables the uninterrupted transfer of power in the order of hundreds of watts over several kilometers, freeing power systems from traditional wiring constraints. Its vast versatility of applications ranges from the ocean depths to outer space. In recent years, particular emphasis has been placed on the development of efficient methods to transfer substantial amounts of power from future space-based solar power stations, which intend to generate clean energy 24/7, to Earth. Despite the immense potential of HPOT, further endeavors should be undertaken in order to enhance overall system efficiency, currently hindered below 20%. A contributing factor to this unsatisfactory performance is the state-of-the-art selection of semiconductors that constitute the receivers of the monochromatic light: the optical photovoltaic converters (OPCs). Therefore, this work aims to identify the most suitable semiconductor materials for high power (~100 Wcm 2) and beyond transmissions in terrestrial and underwater environments. In addition, the first analytical model capable of evaluating, predicting and designing OPCs and its electrical characteristics is provided. The results indicate that III-V wide-bandgap semiconductors (≈2.5 eV), such as InGaN and InAlN, could yield significant efficiency improvements in air and, especially, in subaquatic domains with respect to existing GaAs-based devices.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Design and Characterization of a 53.5% Efficient GalliumIndium Phosphide-Based Optical Photovoltaic Converterunder 637 nm Laser Irradiation at 10 W cm-2

  • Sanmartín, Pablo
  • Fernández, Eduardo F.
  • García Loureiro, Antonio Jesús
  • Montes-Romero, Jesús
  • Cano, Aitana
  • Martín, Pablo
  • Rey-Stolle, Ignacio
  • García, Iván
  • Almonacid, Florencia
High-power optical transmission (HPOT) technology has emerged as a promising alternative among far-field wireless power transmission approaches, enabling the transfer of kilowatts of power over kilometer-scale distances. Its exceptional adaptability allows operation in challenging scenarios where traditional electrical wiring is impractical or unfeasible, thereby opening up a vast array of potential applications previously considered utopian. An important pending assignment in enhancing the performance of laser-based HPOT systems is achieving efficient photovoltaic conversion of high power densities (≥10 W cm−2). In this sense, there is a pressing need for the advancement of optical photovoltaic converters (OPCs) capable of enduring intense monochromatic irradiances. This work presents the design optimization, manufacturing, and characterization processes of a gallium indium phosphide (GaInP)-based OPC under varying 637 nm laser power at room temperature. In addition, methods to evaluate the impact of temperature on performance are provided. The findings reveal a maximum efficiency of 53.5% at 10 W cm−2, surpassing literature results for GaInP converters by over 9%abs at those light intensities. Remarkably, this device withstands unmatched irradiances within GaInP OPCs up to 60 W cm−2, maintaining 42.3% efficiency. This study aims to push forward the development of wide-bandgap power converters with recordbreaking efficiencies paving the way for new applications.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Band-gap material selection for remote high-power laser transmission

  • Fernández, Eduardo F.
  • Almonacid, Florencia
  • García Loureiro, Antonio Jesús
  • Seoane Iglesias, Natalia
High-power laser transmission (HPLT) is attracting a huge interest from both the scientific and industrial community due to its large number of potential applications and future perspectives. This technology consists of the use of a monochromatic light source to power supply a remote system by using a photovoltaic converter. HPLT offers a technological paradigm shift with the possibility of transmitting kilowatts to several kilometres without the use of wires. However, HPLT is still under development and the current efficiency, ≈20%, needs to be improved to achieve the actual potential of the technology. This work is focused on the investigation of the most suitable materials to improve the performance of HPLT systems under a wide range of scenarios. For the first time, the monochromatic efficiency of PV converters, considering the attenuation of the atmosphere with the distance, and for various input light intensities and series resistance scenarios, is deeply investigated. The results indicate that high energy gap materials such as ZnS (3.54 eV) or 6H–SiC (3 eV) could lead to record efficiencies and improve current values in more than 30%.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Laser power converter architectures based on 3C-SiC with efficiencies >80%

  • Fernández Lozano, Javier
  • Seoane Iglesias, Natalia
  • Comesaña Figueroa, Enrique
  • Almonacid, Florencia
  • Fernández , Eduardo
  • García Loureiro, Antonio Jesús
High power laser transmission technology is based on energy transfer through a monochromatic laser onto a photovoltaic receiver avoiding the limitations of conventional wiring. Current technology, headed by GaAs-based devices, faces two limitations: the intrinsic entropic losses and the degradation at high input power densities due to ohmic losses. Two novel laser power converters focused on overcoming these limitations are proposed. 3C-SiC is used as base material because of its high bandgap (2.36 eV) and its excellent crystallographic properties in order to reduce the entropic losses. Also, the current decreases due to the inherent flux reduction of high energy photons. To minimize ohmic losses, a recently proposed vertical architecture is explored, which can significantly reduce series resistance around two orders of magnitude (≈10−5 Ω cm2). Furthermore, 3C-SiC is also implemented in a conventional horizontal architecture to show the advantage of increasing the energy gap to reduce the ohmic losses. The two laser power converters obtain efficiencies above the state-of-the-art (87.4% at 3000 W cm−2 for the vertical architecture and 81.1% at 100 W cm−2 for the horizontal architecture) Taking this into account, the new devices open a new route for ultrahigh efficiency remote powered systems
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

GaAs Vertical-Tunnel-Junction Converter for Ultra-High Laser Power Transfer

  • Outes, Celia
  • Fernández Fernández, Eduardo
  • Seoane Iglesias, Natalia
  • Almonacid, Florencia
  • García Loureiro, Antonio Jesús
High power laser transmission is being intensively researched as a potential solution to transfer power to remote systems, being the power converter (PC) one of the main limiting factor to improve the system efficiency ( η ). Current PCs are mostly horizontal structures in which the η heavily decreases at large input power. In this work, we propose a novel GaAs-based vertical-tunnel-junction (VTJ) PC suitable for ultra-high (UH) input power density (Pin). This structure does not suffer from η degradation at high Pin because it is designed to have low current density, high output voltage and reduced series resistance (~ 2 orders of magnitude lower than the state-of-the-art PCs). We have demonstrated increasing η with Pin, reaching values higher than 76% at 3000 W⋅ cm−2. This vertical-based architecture enables a new set of potential applications for wireless PC to power remote systems with η exceeding today’ s state-of-the-art PC designs.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental characterisation of irradiance and spectral non-uniformity and its impact on multi-junction solar cells: Refractive vs. reflective optics

  • Saura García, José Manuel
  • Rodrigo, Pedro M.
  • Almonacid, Florencia
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
The impact of non-uniform illumination on triple junction solar cells equipped with either refractive or reflective optics without secondary optical elements is characterised by varying the concentrator-to-receiver distance. Indoor experiments covering both electrical measurements and photographs with a charge-coupled device camera are performed. The non-uniformities are examined by differentiating two spectral bands, those affecting the top and middle subcells. This allows the irradiance and spectral distributions to be analysed. The analysis is complemented with ray tracing simulations. Results show a different behaviour for the refractive and reflective systems. Irradiance non-uniformities in the case of the reflective system around the on-focus position are higher than those measured in the refractive system. However, the spectral non-uniformities that characterise the refractive system constitute only a residual effect in the reflective system. The drop in the solar cell fill factor caused by non-uniformities is mainly driven by the degradation of the slope of the I–V curve near the short-circuit point in the case of the refractive system, while it is mainly driven by the degradation of the slope of the I–V curve near the open-circuit point in the case of the reflective system. Both systems are very sensitive to the concentrator-to-receiver distance, a critical parameter that must be accurately designed in any concentrator system. The findings will allow the trade-off between increasing performance and increasing cost strategies to mitigate the non-uniformities in concentrator photovoltaic systems to be better evaluated., This work has been partially funded by the project “UltraMicroCPV” (MICINN- Agencia Estatal de Investigación: PID2019-106497RB-I00/AEI/10.13039/501100011033) and by the project NACe-CPV/TE (Junta de Andalucía, PAIDI 2020: P18-RT-1595). P. M. Rodrigo thanks the Spanish Ministry of Science, Innovation and Universities because of the 2020–2024 Beatriz Galindo fellowship (BEAGAL18/00164) and, the Science and Technology National Council of Mexico (CONACYT) because of his designation as a member of the Mexican System of Researchers. E.F. Fernández thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramón y Cajal programe (RYC-2017-21910). D. Chemisana thanks ICREA for the ICREA Acadèmia.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Effect of non-uniformity on concentrator multi-junction solar cells equipped with refractive secondary optics under shading conditions

  • Saura García, José Manuel
  • Chemisana Villegas, Daniel
  • Rodrigo, Pedro M.
  • Almonacid, Florencia
  • Fernández, Eduardo F.
Non-uniformity is a relevant concern of concentrator photovoltaic systems (CPV) due to its impact on the performance of multi-junction (MJ) solar cells. This work is focused on a state-of-the-art investigation related to the effects of shading on the irradiance profiles and electrical performance of MJ cells. For doing this, three different CPV single-units with a concentration of ≈559x have been experimentally investigated indoors at the CPV laboratory of the University of Jaén. The units are made up of poly(methyl methacrylate) (PMMA) Fresnel lens and standard GaInP/GaInAs/Ge MJ cells. Also, single-lens-optical element (SILO-Pyramid) and refractive truncated pyramid (RTP) homogenizers have been considered. The results indicate that shading produces additional spatial and spectral non-uniformities, and that these are reduced by the use of homogenizers. In addition, the non-uniform spectral illumination has been identified as the main cause of the additional reduction of the performance of MJ solar cells. In this sense, the SILO-Pyramid provides the best results and shows a significantly stable spectral performance under shading conditions. For a no-homogenizer case, the maximum power shows a reduction of 86.3% for a shading factor of 80%, while it is only reduced by 83.2% and by 81.6%, respectively, for the RTP and SILO-Pyramid., This work has been partially funded by the project “UltraMicroCPV” (MICINN- Agencia Estatal de Investigación: PID2019-106497RB-I00/AEI/10.13039/501100011033) and by the project NACe-CPV/TE (Junta de Andalucía, PAIDI 2020: P18-RT-1595). P. M. Rodrigo thanks the Spanish Ministry of Science, Innovation and Universities because of the 2020–2024 Beatriz Galindo fellowship (BEAGAL18/00164) and, the Science and Technology National Council of Mexico (CONACYT) because of his designation as a member of the Mexican System of Researchers. E.F. Fernández thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramón y Cajal programe (RYC-2017-21910). D. Chemisana thanks ICREA for the ICREA Acadèmia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of non-uniformity on concentrator multi-junction solar cells equipped with refractive secondary optics under shading conditions

  • Saura García, José Manuel
  • Chemisana Villegas, Daniel
  • Rodrigo, Pedro M.
  • Almonacid, Florencia
  • Fernández, Eduardo F.
Non-uniformity is a relevant concern of concentrator photovoltaic systems (CPV) due to its impact on the performance of multi-junction (MJ) solar cells. This work is focused on a state-of-the-art investigation related to the effects of shading on the irradiance profiles and electrical performance of MJ cells. For doing this, three different CPV single-units with a concentration of ≈559x have been experimentally investigated indoors at the CPV laboratory of the University of Jaén. The units are made up of poly(methyl methacrylate) (PMMA) Fresnel lens and standard GaInP/GaInAs/Ge MJ cells. Also, single-lens-optical element (SILO-Pyramid) and refractive truncated pyramid (RTP) homogenizers have been considered. The results indicate that shading produces additional spatial and spectral non-uniformities, and that these are reduced by the use of homogenizers. In addition, the non-uniform spectral illumination has been identified as the main cause of the additional reduction of the performance of MJ solar cells. In this sense, the SILO-Pyramid provides the best results and shows a significantly stable spectral performance under shading conditions. For a no-homogenizer case, the maximum power shows a reduction of 86.3% for a shading factor of 80%, while it is only reduced by 83.2% and by 81.6%, respectively, for the RTP and SILO-Pyramid., This work has been partially funded by the project “UltraMicroCPV” (MICINN- Agencia Estatal de Investigación: PID2019-106497RB-I00/AEI/10.13039/501100011033) and by the project NACe-CPV/TE (Junta de Andalucía, PAIDI 2020: P18-RT-1595). P. M. Rodrigo thanks the Spanish Ministry of Science, Innovation and Universities because of the 2020–2024 Beatriz Galindo fellowship (BEAGAL18/00164) and, the Science and Technology National Council of Mexico (CONACYT) because of his designation as a member of the Mexican System of Researchers. E.F. Fernández thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramón y Cajal programe (RYC-2017-21910). D. Chemisana thanks ICREA for the ICREA Acadèmia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental characterisation of irradiance and spectral non-uniformity and its impact on multi-junction solar cells: Refractive vs. reflective optics

  • Saura García, José Manuel
  • Rodrigo, Pedro M.
  • Almonacid, Florencia
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
The impact of non-uniform illumination on triple junction solar cells equipped with either refractive or reflective optics without secondary optical elements is characterised by varying the concentrator-to-receiver distance. Indoor experiments covering both electrical measurements and photographs with a charge-coupled device camera are performed. The non-uniformities are examined by differentiating two spectral bands, those affecting the top and middle subcells. This allows the irradiance and spectral distributions to be analysed. The analysis is complemented with ray tracing simulations. Results show a different behaviour for the refractive and reflective systems. Irradiance non-uniformities in the case of the reflective system around the on-focus position are higher than those measured in the refractive system. However, the spectral non-uniformities that characterise the refractive system constitute only a residual effect in the reflective system. The drop in the solar cell fill factor caused by non-uniformities is mainly driven by the degradation of the slope of the I–V curve near the short-circuit point in the case of the refractive system, while it is mainly driven by the degradation of the slope of the I–V curve near the open-circuit point in the case of the reflective system. Both systems are very sensitive to the concentrator-to-receiver distance, a critical parameter that must be accurately designed in any concentrator system. The findings will allow the trade-off between increasing performance and increasing cost strategies to mitigate the non-uniformities in concentrator photovoltaic systems to be better evaluated., This work has been partially funded by the project “UltraMicroCPV” (MICINN- Agencia Estatal de Investigación: PID2019-106497RB-I00/AEI/10.13039/501100011033) and by the project NACe-CPV/TE (Junta de Andalucía, PAIDI 2020: P18-RT-1595). P. M. Rodrigo thanks the Spanish Ministry of Science, Innovation and Universities because of the 2020–2024 Beatriz Galindo fellowship (BEAGAL18/00164) and, the Science and Technology National Council of Mexico (CONACYT) because of his designation as a member of the Mexican System of Researchers. E.F. Fernández thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramón y Cajal programe (RYC-2017-21910). D. Chemisana thanks ICREA for the ICREA Acadèmia.