Skip to main content

MICROSCOPIA DE FUERZAS BIMODAL PARA CARACTERIZAR CON RESOLUCION ATOMICA Y NANOMETRICA MATERIALES A ALTA VELOCIDAD

PID2019-106801GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Subnanometer Interfacial Forces in Three-Dimensional Atomic Force Microscopy: Water and Octane near a Mica Surface

  • Hernández-Muñoz, Jose
  • Uhlig, Manuel R.
  • Benaglia, Simone
  • Chacón, Enrique
  • Tarazona, Pedro
  • García García, Ricardo
[EN] Three-dimensional force microscopy generates atomically resolved 3D images of solid-liquid interfaces. Here, we investigated the components of the interfacial force exerted by a tip on a mica-liquid interface by comparing density functional theory and experiments. The study involved two liquids: an aqueous solution of KCl (polar) and n-octane as a nonpolar solvent. The comparison between theory and experiments shows the presence of oscillatory and monotonically decaying terms. The periodicity of the oscillation arises from entropic effects associated with the molecular packing of the liquid, while its amplitude carries information on the solid surface (substrate and tip)-liquid interactions. The exponent of the monotonic term comes from cohesive interactions between the liquid molecules, while its amplitude reflects the interactions with the solid surfaces., This work was funded by the Ministerio de Ciencia e Innovación (Spain) under grants PID2019-106801GB-I00, MAT2016-76507-R, FIS2017-86007-C3, and FPU2015/0248 (P.T.) and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no.721874 (SPM2.0).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Speed Nanomechanical Mapping of the Early Stages of Collagen Growth by Bimodal Force Microscopy

  • García-Gisbert, Víctor
  • Benaglia, Simone
  • Uhlig, Manuel R.
  • Proksch, Roger
  • García García, Ricardo
[EN] High-speed atomic force microscopy (AFM) enabled the imaging of protein interactions with millisecond time resolutions (10 fps). However, the acquisition of nanomechanical maps of proteins is about 100 times slower. Here, we developed a high-speed bimodal AFM that provided high-spatial resolution maps of the elastic modulus, the loss tangent, and the topography at imaging rates of 5 fps. The microscope was applied to identify the initial stages of the self-assembly of the collagen structures. By following the changes in the physical properties, we identified four stages, nucleation and growth of collagen precursors, formation of tropocollagen molecules, assembly of tropocollagens into microfibrils, and alignment of microfibrils to generate microribbons. Some emerging collagen structures never matured, and after an existence of several seconds, they disappeared into the solution. The elastic modulus of a microfibril (∼4 MPa) implied very small stiffness (∼3 × 10–6 N/m). Those values amplified the amplitude of the collagen thermal fluctuations on the mica plane, which facilitated microribbon build-up., Financial support from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00; MAT2016-76507-R), Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM), and European Commission Marie Sklodowska-Curie grant agreement No.721874 are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Practical Guide to Single-Protein AFM Nanomechanical Spectroscopy Mapping: Insights and Pitfalls As Unraveled by All-Atom MD Simulations on Immunoglobulin G

  • Vilhena, J. G.
  • Ortega, María
  • Uhlig, Manuel R.
  • García García, Ricardo
  • Pérez, Rubén
[EN] Atomic force microscopy is an invaluable characterization tool in almost every biophysics laboratory. However, obtaining atomic/sub-nanometer resolution on single proteins has thus far remained elusive - a feat long achieved on hard substrates. In this regard, nanomechanical spectroscopy mapping may provide a viable approach to overcome this limitation. By complementing topography with mechanical properties measured locally, one may thus enhance spatial resolution at the single-protein level. In this work, we perform all-atom molecular dynamics simulations of the indentation process on a single immunoglobulin G (IgG) adsorbed on a graphene slab. Our simulations reveal three different stages as a function of strain: a noncontact regime - where the mechanical response is linked to the presence of the water environment - followed by an elastic response and a final plastic deformation regime. In the noncontact regime, we are able to identify hydrophobic/hydrophilic patches over the protein. This regime provides the most local mechanical information that allows one to discern different regions with similar height/topography and leads to the best spatial resolution. In the elastic regime, we conclude that the Young modulus is a well-defined property only within mechanically decoupled domains. This is caused by the fact that the elastic deformation is associated with a global reorganization of the domain. Differences in the mechanical response are large enough to clearly resolve domains within a single protein, such as the three subunits forming the IgG. Two events, unfolding or protein slipping, are observed in the plastic regime. Our simulations allow us to characterize these two processes and to provide a strategy to identify them in the force curves. Finally, we elaborate on possible challenges that could hamper the interpretation of such experiments/simulations and how to overcome them. All in all, our simulations provide a detailed picture of nanomechanical spectroscopy mapping on single proteins, showing its potential and the challenges that need to be overcome to unlock its full potential., Funding from a Marie Sklodowska-Curie Fellowship within the Horizon 2020 framework (Grant No. DLV-795286) and the Swiss National Science Foundation (Grant No. ). R.P. acknowledges support from the Spanish MINECO (Grant No. MAT2017-83273-R) and from the Ministerio de Ciencia e Innovación (MICINN) through the “María de Maeztu” Programme for Units of Excellence in R&D (Grant No. CEX2018-000805-M). R.G. acknowledges funding from the MICINN (Grant No. PID2019-106801GB-I00) and Comunidad de Madrid Grant No. S2018/NMT-4443 (Tec4Bio-CM). We thankfully acknowledge the computer resources, technical expertise, and assistance provided by the Red Española de Supercomputación (RES) at the Minotauro and CTE-Power9 supercomputers (BSC, Barcelona). We thank Dr. Alejandro Martín-González for fruitful discussions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative mapping of magnetic properties at the nanoscale with bimodal AFM

  • García-Gisbert, Víctor
  • Amo, Carlos A.
  • Jaafar, Miriam
  • Asenjo Barahona, Agustina
  • García García, Ricardo
[EN] We demonstrate that a force microscope operated in a bimodal configuration enables the mapping of magnetic interactions with high quantitative accuracy and high-spatial resolution (~30 nm). Bimodal AFM operation doubles the number of observables with respect to conventional magnetic force microscopy methods which enables to determine quantitatively in a single processing step several magnetic properties. The theory of bimodal AFM provides analytical expressions for different magnetic force models, in particular those characterized by power-law and exponential distance dependences. Bimodal AFM provides a self-evaluation protocol to test the accuracy of the measurements. The agreement obtained between the experiments and theory for two different magnetic samples support the application of bimodal AFM to map quantitatively long-range magnetic interactions., Financial support from the Ministerio de Ciencia, Innovación y Universidades (PID2019-106801GB-I00; PID2019-108075RB-C31; MAT2016-76507-R) and Comunidad de Madrid (SI1/PJI/2019-00055) are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomically resolved interfacial water structures on crystalline hydrophilic and hydrophobic surfaces

  • Uhlig, Manuel R.
  • Benaglia, Simone
  • Thakkar, Ravindra
  • Comer, Jeffrey
  • García García, Ricardo
[EN] Hydration layers are formed on hydrophilic crystalline surfaces immersed in water. Their existence has also been predicted for hydrophobic surfaces, yet the experimental evidence is controversial. Using 3D-AFM imaging, we probed the interfacial water structure of hydrophobic and hydrophilic surfaces with atomic-scale spatial resolution. We demonstrate that the atomic-scale structure of interfacial water on crystalline surfaces presents two antagonistic arrangements. On mica, a common hydrophilic crystalline surface, the interface is characterized by the formation of 2 to 3 hydration layers separated by approximately 0.3 nm. On hydrophobic surfaces such as graphite or hexagonal boron nitride (h-BN), the interface is characterized by the formation of 2 to 4 layers separated by about 0.5 nm. The latter interlayer distance indicates that water molecules are expelled from the vicinity of the surface and replaced by hydrocarbon molecules. This creates a new 1.5-2 nm thick interface between the hydrophobic surface and the bulk water. Molecular dynamics simulations reproduced the experimental data and confirmed the above interfacial water structures. This journal is, European Research Council ERC-AdG-340177, the Ministerio de Ciencia, Innovación y Universidades (PID2019- 106801GB-I00; MAT2016-76507-R) and European Commission Marie Sklodowska-Curie grant agreement No. 721874. J.C. acknowledges financial support by the US National Science Foundation under Grant No. CHE-1726332 and DMR-1945589., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accurate Wide-Modulus-Range Nanomechanical Mapping of Ultrathin Interfaces with Bimodal Atomic Force Microscopy

  • Gisbert, Victor G.
  • García García, Ricardo
[EN] The nanoscale determination of the mechanical properties of interfaces is of paramount relevance in materials science and cell biology. Bimodal atomic force microscopy (AFM) is arguably the most advanced nanoscale method for mapping the elastic modulus of interfaces. Simulations, theory, and experiments have validated bimodal AFM measurements on thick samples (from micrometer to millimeter). However, the bottom-effect artifact, this is, the influence of the rigid support on the determination of the Young’s modulus, questions its accuracy for ultrathin materials and interfaces (1–15 nm). Here we develop a bottom-effect correction method that yields the intrinsic Young’s modulus value of a material independent of its thickness. Experiments and numerical simulations validate the accuracy of the method for a wide range of materials (1 MPa to 100 GPa). Otherwise, the Young’s modulus of an ultrathin material might be overestimated by a 10-fold factor., Financial support from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00), CSIC 202050E013, and Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The viscoelasticity of adherent cells follows a single power-law with distinct local variations within a single cell and across cell lines

  • García-Sánchez, Juan
  • Espinosa, Francisco M.
  • Miguez, Rubén
  • García García, Ricardo
[EN] AFM-based force-distance curves are commonly used to characterize the nanomechanical properties of live cells. The transformation of these curves into nanomechanical properties requires the development of contact mechanics models. Spatially-resolved force-distance curves involving 1 to 2 μm deformations were obtained on HeLa and NIH 3T3 (fibroblast) cells. An elastic and two viscoelastic models were used to describe the experimental force-distance curves. The best agreement was obtained by applying a contact mechanics model that accounts for the geometry of the contact and the finite-thickness of the cell and assumes a single power-law dependence with time. Our findings show the shortcomings of elastic and semi-infinite viscoelastic models to characterize the mechanical response of a mammalian cell under micrometer-scale deformations. The parameters of the 3D power-law viscoelastic model, compressive modulus and fluidity exponent showed local variations within a single cell and across the two cell lines. The corresponding nanomechanical maps revealed structures that were not visible in the AFM topographic maps., This project was supported by the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00) and the Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular Recognition by Silicon Nanowire Field-Effect Transistor and Single-Molecule Force Spectroscopy

  • Espinosa, Francisco M.
  • Uhlig, Manuel R.
  • García García, Ricardo
[EN] Silicon nanowire (SiNW) field-effect transistors (FETs) have been developed as very sensitive and label-free biomolecular sensors. The detection principle operating in a SiNW biosensor is indirect. The biomolecules are detected by measuring the changes in the current through the transistor. Those changes are produced by the electrical field created by the biomolecule. Here, we have combined nanolithography, chemical functionalization, electrical measurements and molecular recognition methods to correlate the current measured by the SiNW transistor with the presence of specific molecular recognition events on the surface of the SiNW. Oxidation scanning probe lithography (o-SPL) was applied to fabricate sub-12 nm SiNW field-effect transistors. The devices were applied to detect very small concentrations of proteins (500 pM). Atomic force microscopy (AFM) single-molecule force spectroscopy (SMFS) experiments allowed the identification of the protein adsorption sites on the surface of the nanowire. We detected specific interactions between the biotinfunctionalized AFM tip and individual avidin molecules adsorbed to the SiNW. The measurements confirmed that electrical current changes measured by the device were associated with the deposition of avidin molecules., This research was funded by Ministerio de Ciencia e Innovación (PID2019-106801GB-I00), CSIC 202050E013, Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanorheology and Nanoindentation Revealed a Softeningand an Increased Viscous Fluidity of Adherent Mammalian Cells upon Increasing the Frequency

  • Gisbert, Victor G.
  • Espinosa, Francisco M.
  • Sánchez, Juan G.
  • Serrano, María C.
  • García García, Ricardo
[EN] The nanomechanical response of a cell depends on the frequency at which thecell is probed. The components of the cell that contribute to this property andtheir interplay are not well understood. Here, two force microscopy methodsare integrated to characterize the frequency and/or the velocity-dependentproperties of living cells. It is shown on HeLa and fibroblasts, that cells softenand fluidize upon increasing the frequency or the velocity of the deformation.This property was independent of the type and values (25 or 1000 nm) of thedeformation. At low frequencies (2-10 Hz) or velocities (1–10μms−1), theresponse is dominated by the mechanical properties of the cell surface. Athigher frequencies (>10 Hz) or velocities (>10μms−1), the response isdominated by the hydrodynamic drag of the cytosol. Softening andfluidization does not seem to involve any structural remodeling. It reflects aredistribution of the applied stress between the solid and liquid-like elementsof the cell as the frequency or the velocity is changed. The data indicates thatthe quasistatic mechanical properties of a cell featuring a cytoskeletonpathology might be mimicked by the response of a non-pathological cellwhich is probed at a high frequency., Financial support from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00/AEI/10.13039/501100011033), CSIC 202050E013, Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM) and the European Commission (HORIZON-EIC-2022, project Piezo4Spine, No. 101098597) are acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial Liquid Water on Graphite, Graphene, and 2D Materials

  • García García, Ricardo
[EN] The optical, electronic, and mechanical properties of graphite, few-layer, and two-dimensional (2D) materials have prompted a considerable number of applications. Biosensing, energy storage, and water desalination illustrate applications that require a molecular-scale understanding of the interfacial water structure on 2D materials. This review introduces the most recent experimental and theoretical advances on the structure of interfacial liquid water on graphite-like and 2D materials surfaces. On pristine conditions, atomic-scale resolution experiments revealed the existence of 1-3 hydration layers. Those layers were separated by ∼0.3 nm. The experimental data were supported by molecular dynamics simulations. However, under standard working conditions, atomic-scale resolution experiments revealed the presence of 2-3 hydrocarbon layers. Those layers were separated by ∼0.5 nm. Linear alkanes were the dominant molecular specie within the hydrocarbon layers. Paradoxically, the interface of an aged 2D material surface immersed in water does not have water molecules on its vicinity. Free-energy considerations favored the replacement of water by alkanes., Funding the Ministerio de Ciencia, Innovación y Universidades (PID2019-106801GB-I00 and EUR2022-134029 from AEI/10.13039/501100011033),and CSIC(CSIC(202050E013).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial layering of hydrocarbons on pristine graphite surfaces immersed in water

  • Arvelo, Diana M.
  • Uhlig, Manuel R.
  • Comer, Jeffrey
  • García García, Ricardo
[EN] Interfacial water participates in a wide range of phenomena involving graphite, graphite-like and 2D material interfaces. Recently, several high-spatial resolution experiments have questioned the existence of hydration layers on graphite, graphite-like and 2D material surfaces. Here, 3D AFM was applied to follow in real-time and with atomic-scale depth resolution the evolution of graphite-water interfaces. Pristine graphite surfaces upon immersion in water showed the presence of several hydration layers separated by a distance of 0.3 nm. Those layers were short-lived. After several minutes, the interlayer distance increased to 0.45 nm. At longer immersion times (∼50 min) we observed the formation of a third layer. An interlayer distance of 0.45 nm characterizes the layering of predominantly alkane-like hydrocarbons. Molecular dynamics calculations supported the experimental observations. The replacement of water molecules by hydrocarbons on graphite is spontaneous. It happens whenever the graphite-water volume is exposed to air., Financial support from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00) and the CSIC (202050E013). J. C. acknowledges financial support by US National Science Foundation under grant no. DMR-1945589., Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d2nr04161h
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanorheology and Nanoindentation Revealed a Softening and an Increased Viscous Fluidity of Adherent Mammalian Cells upon Increasing the Frequency

  • Gisbert, Victor G.
  • Espinosa, Francisco M.
  • Sánchez, Juan G.
  • Serrano, María C.
  • García García, Ricardo
The nanomechanical response of a cell depends on the frequency at which thecell is probed. The components of the cell that contribute to this property andtheir interplay are not well understood. Here, two force microscopy methodsare integrated to characterize the frequency and/or the velocity-dependentproperties of living cells. It is shown on HeLa and fibroblasts, that cells softenand fluidize upon increasing the frequency or the velocity of the deformation.This property was independent of the type and values (25 or 1000 nm) of thedeformation. At low frequencies (2-10 Hz) or velocities (1–10 μm s−1 ), theresponse is dominated by the mechanical properties of the cell surface. Athigher frequencies (>10 Hz) or velocities (>10 μm s−1 ), the response isdominated by the hydrodynamic drag of the cytosol. Softening andfluidization does not seem to involve any structural remodeling. It reflects aredistribution of the applied stress between the solid and liquid-like elementsof the cell as the frequency or the velocity is changed. The data indicates thatthe quasistatic mechanical properties of a cell featuring a cytoskeletonpathology might be mimicked by the response of a non-pathological cellwhich is probed at a high frequency., V.G.G. and F.M.E. contributed equally to this work. Financial sup-port from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00 /AEI/10.13039/501100011033), CSIC 202050E013, Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM) and the European Commission(HORIZON-EIC-2022, project Piezo4Spine, No. 101098597) are acknowl-edged.Ministerio de Ciencia e Innovación (España); Agencia Estatal de Investigación (España); Comunidad de Madrid; European Commission