Skip to main content

HIDROGELES DE MATRIZ EXTRACELULAR PULMONAR PARA PREACONDICIONAMIENTO E INSTILACION DE CELULAS MADRE MESENQUIMALES EN EL TRATAMIENTO DE ENFERMEDADES RESPIRATORIAS SEVERAS

PID2019-108958RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Experimental Setting for Applying Mechanical Stimuli to Study the Endothelial Response of Ex Vivo Vessels under Realistic Pathophysiological Environments

  • Osuna, Ana
  • Ulldemolins, Anna|||0000-0001-8825-9436
  • Sanz-Fraile, Hector
  • Otero, Jorge
  • Farré, Núria|||0000-0003-3110-6572
  • Farré, Ramon|||0000-0002-9084-7824
  • Almendros, Isaac|||0000-0002-1998-9379
This paper describes the design, construction and testing of an experimental setting, making it possible to study the endothelium under different pathophysiological conditions. This novel experimental approach allows the application of the following stimuli to an ex vivo vessel in a physiological bath: (a) a realistic intravascular pressure waveform defined by the user; (b) shear stress in the endothelial layer since, in addition to the pressure waveform, the flow through the vessel can be independently controlled by the user; (c) conditions of hypo/hyperoxia and hypo/hypercapnia in an intravascular circulating medium. These stimuli can be applied alone or in different combinations to study possible synergistic or antagonistic effects. The setting performance is illustrated by a proof of concept in an ex vivo rabbit aorta. The experimental setting is easy to build by using very low-cost materials widely available. Online Supplement files provide all the technical information (e.g., circuits, codes, 3D printer drivers) following an open-source hardware approach for free replication.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Experimental setting for applying mechanical stimuli to study the endothelial response of ex vivo vessels under realistic pathophysiological environments

  • Osuna, Ana
  • Ulldemolins, Anna
  • Sanz-Fraile, Hector
  • Otero, Jorge
  • Farré López, Núria
  • Farré, Ramon
  • Almendros, Isaac
This paper describes the design, construction and testing of an experimental setting, making it possible to study the endothelium under different pathophysiological conditions. This novel experimental approach allows the application of the following stimuli to an ex vivo vessel in a physiological bath: (a) a realistic intravascular pressure waveform defined by the user; (b) shear stress in the endothelial layer since, in addition to the pressure waveform, the flow through the vessel can be independently controlled by the user; (c) conditions of hypo/hyperoxia and hypo/hypercapnia in an intravascular circulating medium. These stimuli can be applied alone or in different combinations to study possible synergistic or antagonistic effects. The setting performance is illustrated by a proof of concept in an ex vivo rabbit aorta. The experimental setting is easy to build by using very low-cost materials widely available. Online Supplement files provide all the technical information (e.g., circuits, codes, 3D printer drivers) following an open-source hardware approach for free replication., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities (SAF2017-85574-R, PGC2018-097323-A-I00, PID2019-108958RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cell-Laden 3D Hydrogels of Type I Collagen Incorporating Bacterial Nanocellulose Fibers

  • Malandain, Nanthilde
  • Sanz-Fraile, Hector
  • Farré, Ramon
  • Otero, Jorge
  • Roig Serra, Anna
  • Laromaine, Anna
There is a growing interest in developing natural hydrogel-based scaffolds to culture cells in a three-dimensional (3D) millieu that better mimics the in vivo cells' microenvironment. A promising approach is to use hydrogels from animal tissues, such as decellularized extracellular matrices; however, they usually exhibit suboptimal mechanical properties compared to native tissue and their composition with hundreds of different protein complicates to elucidate which stimulus triggers cell's responses. As simpler scaffolds, type I collagen hydrogels are used to study cell behavior in mechanobiology even though they are also softer than native tissues. In this work, type I collagen is mixed with bacterial nanocellulose fibers (BCf) to develop reinforced scaffolds with mechanical properties suitable for 3D cell culture. BCf were produced from blended pellicles biosynthesized from Komagataeibacter xylinus. Then, BCf were mixed with concentrated collagen from rat-tail tendons to form composite hydrogels. Confocal laser scanning microscopy and scanning electron microscopy images confirmed the homogeneous macro- and microdistribution of both natural polymers. Porosity analysis confirmed that BCf do not disrupt the scaffold structure. Tensile strength and rheology measurements demonstrated the reinforcement action of BCf (43% increased stiffness) compared to the collagen hydrogel while maintaining the same viscoelastic response. Additionally, this reinforcement of collagen hydrogels with BCf offers the possibility to mix cells before gelation and then proceed to the culture of the 3D cell scaffolds. We obtained scaffolds with human bone marrow-derived mesenchymal stromal cells or human fibroblasts within the composite hydrogels, allowing a homogeneous 3D viable culture for at least 7 days. A smaller surface shrinkage in the reinforced hydrogels compared to type I collagen hydrogels confirmed the strengthening of the composite hydrogels. These collagen hydrogels reinforced with BCf might emerge as a promising platform for 3D in vitro organ modeling, tissue-engineering applications, and suitable to conduct fundamental mechanobiology studies., This work was supported by the Spanish Ministry of Science and Innovation through PID2021-122645OB-I00 and PID2019-108958RB-I00 projects, the “Severo Ochoa” Programme for the Center of Excellence in R&D (CEX2019-000917), and the Generalitat de Catalunya (2021SGR00446 grant). N.M. acknowledges the Ph.D. scholarship (PRE2019-089754) in the framework of the Biotechnology Ph.D. program of the UAB. N.M., A.L., and A.R. participated in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network. J.O., H.S.-F., and R.F. were funded by the Spanish Ministry of Science and Innovation (PGC2018-097323-A-I00). The authors acknowledge the use of Biorender.com. Finally, the authors express their gratitude to Thomas Meslier for preparing BCf-SPIONs and to the technical services of ICMAB (scanning electron microscopy, nitrogen adsorption and desorption, and soft supercritical drying)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental setting for applying mechanical stimuli to study the endothelial response of ex vivo vessels under realistic pathophysiological environments

  • Osuna, Ana
  • Ulldemolins, Anna
  • Sanz-Fraile, Hector
  • Otero, Jorge
  • Farré López, Núria
  • Farré, Ramon
  • Almendros, Isaac
This paper describes the design, construction and testing of an experimental setting, making it possible to study the endothelium under different pathophysiological conditions. This novel experimental approach allows the application of the following stimuli to an ex vivo vessel in a physiological bath: (a) a realistic intravascular pressure waveform defined by the user; (b) shear stress in the endothelial layer since, in addition to the pressure waveform, the flow through the vessel can be independently controlled by the user; (c) conditions of hypo/hyperoxia and hypo/hypercapnia in an intravascular circulating medium. These stimuli can be applied alone or in different combinations to study possible synergistic or antagonistic effects. The setting performance is illustrated by a proof of concept in an ex vivo rabbit aorta. The experimental setting is easy to build by using very low-cost materials widely available. Online Supplement files provide all the technical information (e.g., circuits, codes, 3D printer drivers) following an open-source hardware approach for free replication., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities (SAF2017-85574-R, PGC2018-097323-A-I00, PID2019-108958RB-I00).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Lung Extracellular Matrix Hydrogels Enhance Preservation of Type II Phenotype in Primary Alveolar Epithelial Cells

  • Marhuenda, Esther|||0000-0001-9467-0459
  • Villarino, Alvaro
  • Narciso, Maria Leonor|||0000-0002-4994-1691
  • Camprubí-Rimblas, Marta|||0000-0002-4085-5324
  • Farré, Ramon|||0000-0002-9084-7824
  • Gavara, Núria|||0000-0002-7666-110X
  • Artigas Raventós, Antoni|||0000-0002-8029-1017
  • Almendros, Isaac|||0000-0002-1998-9379
  • Otero, Jorge
One of the main limitations of in vitro studies on lung diseases is the difficulty of maintaining the type II phenotype of alveolar epithelial cells in culture. This fact has previously been related to the translocation of the mechanosensing Yes-associated protein (YAP) to the nuclei and Rho signaling pathway. In this work, we aimed to culture and subculture primary alveolar type II cells on extracellular matrix lung-derived hydrogels to assess their suitability for phenotype maintenance. Cells cultured on lung hydrogels formed monolayers and maintained type II phenotype for a longer time as compared with those conventionally cultured. Interestingly, cells successfully grew when they were subsequently cultured on a dish. Moreover, cells cultured on a plate showed the active form of the YAP protein and the formation of stress fibers and focal adhesions. The results of chemically inhibiting the Rho pathway strongly suggest that this is one of the mechanisms by which the hydrogel promotes type II phenotype maintenance. These results regarding protein expression strongly suggest that the chemical and biophysical properties of the hydrogel have a considerable impact on the transition from ATII to ATI phenotypes. In conclusion, culturing primary alveolar epithelial cells on lung ECM-derived hydrogels may facilitate the prolonged culturing of these cells, and thus help in the research on lung diseases.