Skip to main content

ONDAS DE SONIDO EN METAMATERIALES, METASUPERFICIES Y MEDIOS NO-HERMITICOS

PID2019-109175GB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Equivalent Acoustic Material for Air-Filled Porous Absorption Simulations in Finite Different Time Domain Methods: Design and Comparison

  • Iglesias, P.C.
  • Godinho, I.
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Extracting the microscopic parameters of a porous material is a complex task, and attempts have been made to develop models that can simulate their characteristics, gathering the least amount of information possible. As a case in point, tests to evaluate macroscopic behaviors such as tortuosity, which depends directly on the microscopic fluid velocities, are highly susceptible to generate errors if the precision of the measurement devices is not correct, and the same goes for the other parameters. For this reason, in this paper, a sound propagation model in porous materials with a rigid frame is presented based on a local theory, which tries to simplify, even more, the way to obtain the basic characteristics of porous materials, such as their absorption coefficient at normal and random incidence, and their normal surface impedance. The proposed linearized equivalent fluid model presents four phenomenological coefficients, which characterize acoustic propagation trough the material. Their values are obtained from the material thickness and a measurement in an impedance tube following the ISO 10534 standard. Thus, what is only required is the measured absorption coefficient, either on one third or one octave bands, to fully represent the acoustic behavior in the finite different in time domain (FDTD) method. The model has been simulated with FDTD in porous and fibrous kernels, and the results show a strong agreement with the laboratory measurements and with the analytical results calculated with well-established semi-phenomenological models., This work was supported by the Spanish Ministry of Economy and Innovation (MINECO) and the European Union FEDER (project PID2019-109175GB-C22). This work was partly financed by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UIDB/04029/2020 (doi.org/10.54499/ UIDB/04029/2020), and under the Associate Laboratory Advanced Production and Intelligent Systems ARISE under reference LA/P/0112/2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing the Insertion Loss of Sonic Crystal Noise Barriers with Helmholtz Resonators

  • Redondo, Javier|||0000-0002-5507-7799
  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] Helmholtz resonators (HRs) have the advantage of extending and improving their insulating capacity when used as scatterers in noise barriers made of periodic media, such as sonic crystals (SCs). However, the interaction between multiple Bragg scattering and local resonance phenomena can increase or decrease the insulation of the barrier depending on its design. In the present work, we numerically investigate the factors that determine how such interferences occur and the specific conditions to increase the insertion loss of sonic crystal noise barriers (SCNBs) made of cylindrical scatterers with HRs. Two factors are crucial for the variation of the isolation of the barrier in the Bragg-bandgap (Bragg-BG): the orientation of the resonator mouth with respect to the incident wave, and the resonance frequency of the resonator with respect to the central frequency of the Bragg-BG. Based on this phenomenon, we propose a sonic crystal noise barrier consisting of scatterers with two Helmholtz resonators. The insertion loss of the structure is determined numerically and shows an increase of 20 dB at the BG compared to a conventional barrier with cylindrical scatterers., This work was supported by the Spanish Ministry of Economy and Innovation (MINECO) and the European Union FEDER (project PID2019-109175GB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal absorption of flexural energy in thin plates by critically coupling a locally resonant grating

  • Leng, J.
  • Gautier, F.
  • Pelat, A.
  • Groby, J. -P.
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The optimal absorption of flexural energy by the critical coupling of a locally resonant grating embedded in a thin plate is reported in this work for the reflection and transmission problems. The grating is made of a 1D-periodic array of local resonators. A viscoelastic coating is also placed on top of each resonator to control the intrinsic losses of the system. The scattering matrices for the propagative waves of both problems are obtained by means of the Layered Multiple Scattering Theory and validated by the Finite Element Method. In this work, we find that the perfect absorption can be obtained in the reflection problem and the maximal absorption in the transmission problem is limited to 50% by tuning the losses only. These results agree with the theoretical predictions since the eigenvalues reduce to the reflection coefficient in the reflection problem and only one of the two eigenvalues of the scattering matrix is critically coupled in the transmission problem. These results highlight the adaptability of the critical coupling method to optimize the absorption of locally resonant materials for flexural waves in 2D transmission and reflection problems, and pave the way to the design of resonators for efficient flexural wave absorption., This work has been funded by the RFI Le Mans Acoustique (Region Pays de la Loire) within the framework of the MetaplaQ project. This article is based upon work from COST action DENORMS CA 15125, supported by COST (European Cooperation in Science and Technology). This work was partly supported by the project HYPERMETA funded under the program Etoiles Montantes de la Region Pays de la Loire and by the project eTNAA ANR-17-CE08-0035-01 (projet ANR 2017-2021). The authors also acknowledge support from the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project PID2019-109175GB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Simple Method to Estimate the In Situ Performance of Noise Barriers

  • Redondo, Javier|||0000-0002-5507-7799
  • Gaja-Silvestre, Pau
  • Godinho, Luis
  • Amado-Mendes, Paulo
[EN] Noise barriers are usually classified attending to their intrinsic acoustic characteristics. This is standardized by the European Standards EN 1793, parts 2 and 6, in which a single parameter, DLR or DLSI, is defined in order to quantify the sound insulation performance of noise barriers. However, the final performance of a noise barrier, quantified by the so-called insertion loss, IL is not only dependent on the insulation provided by the noise barrier, but it is as well affected by geometrical aspects and the acoustic characteristics of the environment where these noise-reducing devices are placed. In this work, we explore the relationship between the insertion loss and the acoustic insulation by means of numerical methods. Moreover, the authors propose a simple way to predict the insertion loss from a purely acoustic numerical simulation in which this parameter is obtained for a completely rigid noise barrier, and knowing the noise barrier¿s sound reduction index, in one third octave bands., This work was supported in part by the grant "PID2019-109175GB-C22" funded by MCIN/AEI/10.13039/501100011033. This work was developed within the scope of the POCI01-0247-FEDER-033990 (iNBRail) co-funded by FEDER, through the Operational Programme for Competitiveness and Internationalization (POCI), and POCI-01-0247-FEDER-033691 (HLS-Hybrid Log Shield) Projects, funded by FEDER funds through COMPETE 2020. This work was also funded by Base Funding -UIDB/04029/2020-of ISISE (Institute for Sustainability and Innovation in Structural Engineering) funded by national funds through the FCT/MCTES (PIDDAC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An equivalent lattice-modified model of interfering Bragg bandgaps and Locally Resonant Stop Bands for phononic crystal made from Locally Resonant elements

  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Godinho, Luis
  • Staliunas, Kestutis
[EN] waves is a hot topic. An important class of these metamaterials is based on phononic crystals with Locally Resonant Structure, included in those commonly known as Locally Resonant Sonic Materials. In these metamaterials, wave control is basically performed by two mechanisms: internal (or local) resonances in the scatterers that form the phononic crystal, and Bragg bandgaps due to structural periodicity. Their main control feature is the resonance peaks forming additional stop-bands away from the Bragg frequency, mainly in the low frequency regime. For some applications, coupling of the two phenomena is necessary to create a broad transmission gap. However, when both are located in close frequency ranges, some destructive interferences can occur. In this paper, the authors develop a comprehensive numerical model of periodic arrays of Hemholtz resonators, which explains in detail the physical mechanisms of this destructive interference and, simultaneously, allows the reproduction of the consequences of the interference. The numerical results are supported by experimental tests., This work was supported in part by the grant ¿PID2019-109175 GBC22¿ funded by CIN/AEI/10.13039/501100011033. This work was developed within the scope of the POCI-01-0247-FEDER-033990 (iNBRail) co-funded by FEDER, through the Operational Programme for Competitiveness and Internationalization (POCI), and POCI-01-0247- FEDER-033691 (HLS¿Hybrid Log Shield) Projects, funded by FEDER funds through COMPETE 2020. This work was also funded by Base Funding ¿UIDB/04029/2020¿of ISISE (Institute for Sustainability and Innovation in Structural Engineering) funded by national funds through the FCT/MCTES (PIDDAC). This work was also funded from European Social Fund (project No 09.3.3- LMT-K712-17- 0016), also from the Spanish Ministerio de Ciencia e Innovacion ¿ under grant No.385 (PID2019-109175 GB-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Directional Ultrasound Source for Solid Materials Inspection: Diffraction Management in a Metallic Phononic Crystal

  • Selim, Hossam
  • Trull, Jose
  • Delgado Prieto, Miguel
  • Cojocaru, Crina
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] In this work, we numerically investigate the diffraction management of longitudinal elastic waves propagating in a two-dimensional metallic phononic crystal. We demonstrate that this structure acts as an "ultrasonic lens", providing self-collimation or focusing effect at a certain distance from the crystal output. We implement this directional propagation in the design of a coupling device capable to control the directivity or focusing of ultrasonic waves propagation inside a target object. These effects are robust over a broad frequency band and are preserved in the propagation through a coupling gel between the "ultrasonic lens" and the solid target. These results may find interesting industrial and medical applications, where the localization of the ultrasonic waves may be required at certain positions embedded in the object under study. An application example for non-destructive testing with improved results, after using the ultrasonic lens, is discussed as a proof of concept for the novelty and applicability of our numerical simulation study., H. Selim, J. Trull, C. Cojocaru, and R. Pico acknowledge partial support from the Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project PID2019-109175GB-C22. H. Selim, J. Trull, and C. Cojocaru acknowledge partial support from US Army Research, Development, and Engineering Command (RDECOM) through project W911NF-16-1-0563.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sonic Crystal Noise Barrier with Resonant Cavities for Train Brake Noise Mitigation

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Galiana-Nieves, Jaime
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Redondo, Javier|||0000-0002-5507-7799
  • Sangiorgio, Valentino
  • Vito Graziano, Angelo
  • Parisi, Nicola
[EN] In an experimental investigation, the development of sonic crystal noise barriers (SCNBs) is undertaken to address the issue of train brake noise (TBN), focusing on the use of local resonances in scatterers of sonic crystals. Recent research has shown that the inclusion of cavity resonators in the crystal scatterers allows for the modification of their insulating properties. In those works, it has been demonstrated that this interaction can be used to build highly insulating structures. The study proposes an SCNB design that includes a resonant cavity specifically to mitigate TBN and validates this design through experimental measures. The experiments confirm the enhanced sound insulation capabilities of SCNBs, compare them to the conventional noise barriers ones and demonstrate the applicability and effectiveness of the proposed design in real-world scenarios., This work was supported by the Spanish Ministry of Economy and Innovation (MINECO) and the European Union FEDER (project PID2019-109175GB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic panels based on recycled paper sludge and lime composites

  • Astrauskas, T.
  • Grubliauskas, R.
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] Recent trends in waste management have initiated interest in recycled materials for sound absorption applications. The present paper studies the possibility of paper sludge to be recycled as material for sound absorption applications. Paper sludge (PS) is the water treatment waste, produced during paper production. Two different methods were studied to produce paper sludge and slaked lime composite acoustic panels for sound absorption applications at low and mid-frequencies. The sound absorption coefficient of paper sludge composite panels is measured in an impedance tube using the two-microphone method. The samples produced with different methods showed different behaviours of sound absorption. The primary method to produce showed acoustic asymmetry in the vertical direction of the samples, and it was considerably fragile as well. An improved method to produce PS composite panels was proposed in this paper. Using this method, homogenous and robust acoustic panels were obtained., The authors would like to kindly thank the technician Javier Zaragoza Dolz and Dr. Olga Kizinievi for their fruitful suggestions on this study. This research was financially supported by the Ministry of Science and Innovation and the European Union FEDER through Project PID2019-109175GB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of fineness, length and hollow section of fibers on acoustic absorption

  • Atiénzar-Navarro, Roberto
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • del Rey, Romina|||0000-0001-5907-0677
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] A fibrous material is characterized by its fineness, flexibility and high length/fineness ratio and it is used to reduce noise in indoor rooms due to their porous structure. The aim of this work is focused on investigating the structure of two different fibers (acrylic and polyester) from the analysis of the macrostructural parameters, such as fineness, length and cross-section (solid or hollow). Furthermore, the degree of influence of these parameters on the average sound absorption has been investigated. The sound absorption coefficient of fibers is measured at normal incidence in the impedance tube. In acrylic fibers, results showed that the fineness of the fiber has a significant influence on the sound absorption compared to the length of the fiber. In polyester fibers, hollow fibers have a better acoustic behavior compared to solid fibers., The authors disclosed receipt of the following financial support for the research, authorship and/or publication of this article: This work was supported by the Spanish Ministry of Economy and Innovation (MINECO) and the European Union FEDER (project PID2019-109175GB-C22), the Regional Ministry of Education, Culture and Sport of the Generalitat Valenciana (project ACIF/2017/073) and with the European Structural Investment Funds (ESIF-European Union).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic characterization of a cavitation tunnel for ship propeller noise studies

  • Bocanegra, J. A.
  • Borelli, D.
  • Gaggero, T.
  • Tani, G.
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The noise radiated by ship propellers can be studied by analyzing scaled models in a cavitation tunnel. However, transferring the measurements made in the enclosed space of the tunnel to the expected values in a full-scale propeller (in a free field) presents a challenge for noise measurements. An acoustic characterization of the DITEN cavitation tunnel, including a study of normal modes and acoustic response to harmonic sources, is presented to understand the primary acoustic behaviour of the enclosure and its propagation characteristics. A three-dimensional numerical model was developed to simulate the DITEN Genoa University cavitation tunnel and evaluate the influence of elements such as a dynamometer, fins, impeller, and source position on the acoustic response of the tunnel. The study showed the influence of the mentioned elements on the acoustic response of the tunnel, and the numerical predictions were validated by comparing them with the experimental campaign in the low-mid frequency range. The study provides valuable insights into the behaviour of sound waves in a cavitation tunnel and the influence of various factors, which can help design and optimize cavitation tunnels and related experiments. (c) 2024 Shanghai Jiaotong University. Published by Elsevier B.V. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ), Ruben Pico acknowledges support from the Spanish Ministry of Economy and Innovation (MINECO) and EuropeanUnion FEDER through project PID2019-109175GB-C22 and PID2022-138321NB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Review of launcher lift-off noise prediction and mitigation

  • Escartí-Guillem, Mara Salut
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Hoyas, Sergio|||0000-0002-8458-7288
[EN] This article provides a comprehensive overview of noise prediction and mitigation methodologies within the context of rocket launch events. The first section presents noise sources generated during the launch and the methods employed for aeroacoustic prediction. In particular, we focus on various prediction approaches, including semi-empirical models, sub-scale experiments, and numerical models. The second section centers on the vibroacoustic study of the payload fairing, introducing the core numerical models used to analyze the fairing's acoustic response. These models consist of the Finite Element Method, the Boundary Element Method, and the Statistical Energy Analysis Method. Finally, we review acoustic mitigation during launch events. This section categorizes mitigation techniques into those acting at the fairing cover, such as sound-absorbing materials, and those acting at the launch platform, such as water injection. Each technology's acoustic performance and its respective advantages and disadvantages are summarized. Furthermore, we introduce acoustic metamaterials based on Helmholtz resonators (HR), which serve as the technological foundation for acoustic metamaterials and hold the potential for application in actual launch vehicles., SH was funded by project PID2021-128676OB-I00 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the European Union. LGR acknowledges the funding of project DIN2019-010877. MEG was funded by project PID2019-109175GB-C22.While preparing this work, the author (s) used Grammarly to review the grammar of the article. After using this tool, the author (s) reviewed and edited the content as needed and take (s) full responsibility for the content of the publication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deflector shape impact on aero-acoustic noise generation and propagation

  • Escartí-Guillem, Mara Salut
  • Hoyas, Sergio|||0000-0002-8458-7288
  • García-Raffi, L. M.|||0000-0003-3985-8453
[EN] The acoustic pressure level generated during lift-off and the associated vibrations can significantly affect the payload of a launch vehicle. Optimizing the plume deflector is one of the most effective methods to reduce this noise. Considering the Vega launcher as a case of study, different deflectors are studied: flat, inclined at 30 degrees, and wedge. The approach followed is to use the unsteady Navier-Stokes equations to solve both the noise generation and the propagation. First, it has been observed that the blast wave, due to the ignition overpressure, is independent of the deflector geometry. However, the predominant acoustic waves are due to the impact of the jet with the deflectors. The analysis has shown that the flat deflector generates more shock waves and propagates the acoustic waves equally in all directions so that more acoustic loads reach the fairing. The inclined deflector causes a plate shock and intermediate tail shocks and redirects the flow towards one side of the launcher. Finally, the wedge deflector generates a detached shock wave with a higher pressure increase than the inclined deflector. However, as the flow is redirected towards the two sides, a lower OASPL reaches the fairing. In the same way, the pressure distribution over the fairing surface has shown that the wedge deflector is acoustically more efficient for this case of study. The acoustic effectiveness of deflectors has been demonstrated compared to the case without a deflector. Therefore, deflectors are advised to be included on the launch platform to improve payload comfort and reliability on the launchers., Authors acknowledge the support of the European Space Agency, France under contract 4000126316/19/NL/LvH of project REDLAUCH: Launch Sound Level Reduction. This work has the support of grant PID2021-128676OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". The work was supported by the Spanish Ministry of Science and Innovation through project PID2019-109175GB-C22 Mineco/FEDER. Part of the simulations have been performed on MareNostrum (BSC) with the project IM-2021-2-0017 Rocket launch aeroacoustic. L.M. Garcia-Raffi is grateful for the partial support by the Grant PID2020-112759GB-I00 funded by MCIN/AEI/10.13039/501100011033.r MareNostrum (BSC) with the project IM-2021-2-0017 Rocket launch aeroacoustic. L.M. Garcia-Raffi is grateful for the partial support by the Grant PID2020-112759GB-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of CaCO3 Filled Poly(lactic) Acid and Bio Polyethylene Materials for Building Applications

  • Serra-Parareda, Ferran
  • Tarrés, Quim
  • Espinach, Francesc X.
  • Mutjé, Pere
  • Delgado-Aguilar, Marc
  • Alba, Jesus|||0000-0002-4188-854X
[EN] Noise pollution has been identified as a cause of a broad spectrum of diseases, motivating researchers to identify building materials capable of attenuating this pollution. The most common solution is the use of gypsum boards, which show a good response for low frequencies but have a poorer response for high frequencies. In addition, due to environmental concerns associated with buildings, the use of materials that minimize environmental impacts must be favored. In this research, two biopolymers, a poly(lactic) acid and a bio-polyethylene, were filled with two typologies of calcium carbonate, and their soundproofing properties were tested using impedance tubes. In addition, the morphology of the fillers was characterized, and here we discuss its impact on the mechanical properties of the composites. The results showed that the incorporation of calcium carbonate into bio-based thermoplastic materials can represent a strong alternative to gypsum, because their mechanical properties and sound barrier performance are superior. In addition, the inclusion of mineral fillers in thermoplastic materials has a positive impact on production costs, in addition to preserving the advantages of thermoplastics in terms of processing and recycling. Although the use of carbonate calcium decreases the mechanical properties of the materials, it enables the production of materials with insulation that is four-fold higher than that of gypsum. This demonstrates the potential of these materials as building lightweight solutions., This research was funded by Agencia Estatal de Investigación, project METASON (PID2019-109175GB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Natural sonic crystal absorber constituted of seagrass (Posidonia Oceanica) fibrous spheres

  • Barguet, L.
  • Romero-García, V.
  • Groby, J.-P.
  • Jimenez, Noe|||0000-0002-6539-670X
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] We present a 3-dimensional fully natural sonic crystal composed of spherical aggregates of fibers (called Aegagropilae) resulting from the decomposition of Posidonia Oceanica. The fiber network is first acoustically characterized, providing insights on this natural fiber entanglement due to turbulent flow. The Aegagropilae are then arranged on a principal cubic lattice. The band diagram and topology of this structure are analyzed, notably via Argand representation of its scattering elements. This fully natural sonic crystal exhibits excellent sound absorbing properties and thus represents a sustainable alternative that could outperform conventional acoustic materials., This article is based upon work from COST Action DENORMS CA15125, supported by COST(European Cooperation in Science and Technology). The authors gratefully acknowledge the ANR-RGC METARoom (ANR-18-CE08-0021) project, the project HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire, and the project PID2019-109175GB-C22 funded by the Spanish Ministry of Science and Innovation. N.J. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) through grant "Juan de la Cierva - Incorporacion" (IJC2018-037897-I). The authors would like to thank V. Pagneux and R. Pico Vila for useful discussions and J. Barber and C. Dordoni for their help in collecting the samples.