Skip to main content

CONTACTOS SELECTIVOS Y CAPAS ACTIVAS PARA DISPOSITIVOS DE ENERGIA

PID2019-109215RB-C42

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre CENTRO DE INVESTIGACION ENERGETICA MEDIOAMBIENTAL Y TECNOLOGICA (CIEMAT)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Optical Characterization of H-Free a-Si Layers Grown by rf-Magnetron Sputtering by Inverse Synthesis Using Matlab: Tauc–Lorentz–Urbach Parameterization

  • Márquez Navarro, Emilio José
  • Ruiz Pérez, Juan José
  • Ballester, Manuel
  • Márquez Lozano, Almudena del Pilar
  • Blanco Ollero, Eduardo
  • Minkov, Dorian
  • Fernández Ruano, Susana M.
  • Saugar, Elias
Several, nearly-1-mu m-thick, pure, unhydrogenated amorphous-silicon (a-Si) thin layers were grown at high rates by non-equilibrium rf-magnetron Ar-plasma sputtering (RFMS) onto room-temperature low-cost glass substrates. A new approach is employed for the optical characterization of the thin-layer samples, which is based on some new formulae for the normal-incidence transmission of such a samples and on the adoption of the inverse-synthesis method, by using a devised Matlab GUI environment. The so-far existing limiting value of the thickness-non-uniformity parameter, & UDelta;d, when optically characterizing wedge-shaped layers, has been suppressed with the introduction of the appropriate corrections in the expression of transmittance. The optical responses of the H-free RFMS-a-Si thin films investigated, were successfully parameterized using a single, Kramers-Kronig (KK)-consistent, Tauc-Lorentz oscillator model, with the inclusion in the model of the Urbach tail (TLUC), in the present case of non-hydrogenated a-Si films. We have also employed the Wemple-DiDomenico (WDD) single-oscillator model to calculate the two WDD dispersion parameters, dispersion energy, Ed, and oscillator energy, Eso. The amorphous-to-crystalline mass-density ratio in the expression for Ed suggested by Wemple and DiDomenico is the key factor in understanding the refractive index behavior of the a-Si layers under study. The value of the porosity for the specific rf-magnetron sputtering deposition conditions employed in this work, with an Ar-pressure of ~4.4 Pa, is found to be approximately 21%. Additionally, it must be concluded that the adopted TLUC parameterization is highly accurate for the evaluation of the UV/visible/NIR transmittance measurements, on the H-free a-Si investigated. Finally, the performed experiments are needed to have more confidence of quick and accurate optical-characterizations techniques, in order to find new applications of a-Si layers in optics and optoelectronics., Funding This research was funded by the SCALED project, grant number PID2019-109215RB-C42, provided by the Spanish Ministry of Science and Innovation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Optical Properties of Reactive RF Magnetron Sputtered Polycrystalline Cu3N Thin Films Determined by UV/Visible/NIR Spectroscopic Ellipsometry: An Eco-Friendly Solar Light Absorber

  • Márquez Navarro, Emilio José
  • Blanco Ollero, Eduardo
  • García-Gurrea, M.
  • Cintado-Puerta, M.
  • Domínguez de la Vega, Manuel
  • Ballester, Manuel
  • Manuel Delgado, José Manuel
  • Rodríguez-Tapiador, M.I.
  • Fernández, S.M.
Copper nitride ((Formula presented.)), a metastable poly-crystalline semiconductor material with reasonably high stability at room temperature, is receiving much attention as a very promising next-generation, earth-abundant, thin film solar light absorber. Its non-toxicity, on the other hand, makes it a very attractive eco-friendly (greener from an environmental standpoint) semiconducting material. In the present investigation, (Formula presented.) thin films were successfully grown by employing reactive radio-frequency magnetron sputtering at room temperature with an RF-power of 50 W, total working gas pressure of (Formula presented.), and partial nitrogen pressures of (Formula presented.) and (Formula presented.), respectively, onto glass substrates. We investigated how argon affected the optical properties of the thin films of Cu (Formula presented.) N, with the aim of achieving a low-cost solar light absorber material with the essential characteristics that are needed to replace the more common silicon that is currently in present solar cells. Variable angle spectroscopic ellipsometry measurements were taken at three different angles, (Formula presented.), (Formula presented.), and (Formula presented.), to determine the two ellipsometric parameters psi, (Formula presented.), and delta, (Formula presented.). The bulk planar (Formula presented.) layer was characterized by a one-dimensional graded index model together with the combination of a Tauc–Lorentz oscillator, while a Bruggeman effective medium approximation model with a (Formula presented.) air void was adopted in order to account for the existing surface roughness layer. In addition, the optical properties, such as the energy band gap, refractive index, extinction coefficient, and absorption coefficient, were all accurately found to highlight the true potential of this particular material as a solar light absorber within a photovoltaic device. The direct and indirect band gap energies were precisely computed, and it was found that they fell within the useful energy ranges of (Formula presented.) – (Formula presented.) eV and (Formula presented.) – (Formula presented.) eV, respectively. The atomic structure, morphology, and chemical composition of the Cu (Formula presented.) N thin films were analyzed using X-ray diffraction, atomic force microscopy, and energy-dispersive X-ray spectroscopy, respectively. The Cu (Formula presented.) N thin layer thickness, profile texture, and surface topography of the (Formula presented.) material were characterized using scanning electron microscopy.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Mid-Infrared (MIR) Complex Refractive Index Spectra of Polycrystalline Copper-Nitride Films by IR-VASE Ellipsometry and Their FIB-SEM Porosity

  • Márquez Navarro, Emilio José
  • Blanco Ollero, Eduardo
  • Manuel Delgado, José Manuel
  • Ballester, M.
  • García-Gurrea, M.
  • Rodríguez-Tapiador, M.I.
  • Fernández, S.M.
  • Willomitzer, Florian
  • Katsaggelos, Aggelos K.
Copper-nitride (Cu (Formula presented.) N) semiconductor material is attracting much attention as a potential, next-generation thin-film solar light absorber in solar cells. In this communication, polycrystalline covalent Cu (Formula presented.) N thin films were prepared using reactive-RF-magnetron-sputtering deposition, at room temperature, onto glass and silicon substrates. The very-broadband optical properties of the Cu (Formula presented.) N thin film layers were studied by UV-MIR (0.2–40 (Formula presented.) m) ellipsometry and optical transmission, to be able to achieve the goal of a low-cost absorber material to replace the conventional silicon. The reactive-RF-sputtered Cu (Formula presented.) N films were also investigated by focused ion beam scanning electron microscopy and both FTIR and Raman spectroscopies. The less dense layer was found to have a value of the static refractive index of 2.304, and the denser film had a value of 2.496. The iso-absorption gap, (Formula presented.), varied between approximately 1.3 and 1.8 eV and could be considered suitable as a solar light absorber.
Docta Complutense
Publication Artículo científico (JournalArticle)

Indium tin oxide obtained by high pressure sputtering for emerging selective contacts in photovoltaic cells

  • Caudevilla Gutiérrez, Daniel
  • García Hemme, Eric
  • San Andrés Serrano, Enrique
  • Pérez Zenteno, Francisco José
  • Torres, I.
  • Barrio, R.
  • García Hernansanz, Rodrigo
  • Algaidy, Sari
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
This article studies the physical and electrical behavior of indium tin oxide layers (ITO) grown by an unconventional technique: High Pressure Sputtering (HPS), from a ceramic ITO target in a pure Ar atmosphere. This technique has the potential to reduce plasma induced damage to the samples. The aim is to obtain, at low temperature via HPS, good quality transparent conductive oxide layers for experimental photovoltaic cells with emerging selective contacts such as transition metal oxides, alkaline metal fluorides, etc. We found that the resistivity of the films was strongly dependent on Ar pressure. To obtain device-quality resistivity without intentional heating during deposition a pressure higher than 1.0 mbar was needed. These films deposited on glass were amorphous, presented a high electron mobility (up to 45 cm2V- 1s- 1) and a high carrier density (2.9 x 1020 cm-3 for the sample with the highest mobility). The optimum Ar pressure range was found at 1.5-2.3 mbar. However, the resistivity degraded with a moderate annealing temperature in air. Finally, the feasibility of the integration with photovoltaic cells was assessed by depositing on Si substrates passivated by a-Si:H. The film deposited at 1.5 mbar was uniform and amorphous, and the carrier lifetime obtained was 1.22 ms with an implied open circuit voltage of 719 mV after a 215 degrees C air anneal. The antireflective properties of HPS ITO were also demonstrated. These results show that ITO deposited by HPS is adequate for the research of solar cells with emerging selective contacts.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Impact of graphene monolayer on the performance of non-conventional silicon heterojunction solar cells with moox hole-selective contact

  • Ros, Eloi
  • Fernández, Susana
  • Ortega, Pablo
  • Taboada, Elena
  • Arnedo Gil, Israel
  • Gandía, José Javier
  • Voz, Cristóbal
In this work, a new design of transparent conductive electrode based on a graphene monolayer is evaluated. This hybrid electrode is incorporated into non-standard, high-efficiency crystalline silicon solar cells, where the conventional emitter is replaced by a MoOx selective contact. The device characterization reveals a clear electrical improvement when the graphene monolayer is placed as part of the electrode. The current–voltage characteristic of the solar cell with graphene shows an improved FF and Voc provided by the front electrode modification. Improved conductance values up to 5.5 mS are achieved for the graphene-based electrode, in comparison with 3 mS for bare ITO. In addition, the device efficiency improves by around 1.6% when graphene is incorporated on top. These results so far open the possibility of noticeably improving the contact technology of non-conventional photovoltaic technologies and further enhancing their performance., This research was funded by MCIN/AEI/10.13039/501100011033, grant numbers PID2019-109215RB-C41 and PID2019-109215RB-C42.