Skip to main content

MATERIALES QUIRALES CON PROPIEDADES-ESTIMULO RESPUESTA: DISEÑO, SINTESIS Y APLICACIONES

PID2019-109733GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Full Control of the Chiral Overpass Effect in Helical Polymers: P/M Screw Sense Induction by Remote Chiral Centers After Bypassing the First Chiral Residue

  • Rodríguez Riego, Rafael
  • Rivadulla Cendal, Elena
  • Fernández Míguez, Manuel
  • Fernández Rodríguez, Berta
  • Maeda, Katsuhiro
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
In helical polymers, helical sense induction is usually commanded by teleinduction mechanism, where the largest substituent of the chiral residue directly attached to the main chain is the one that commands the helical sense. In this work, different helical structures with different helical senses are induced in a helical polymer [poly-(phenylacetylene)] when the conformational composition of two different dihedral angles of a pendant group with more than two chiral residues is tamed. Thus, while the dihedral angle at chiral residue 1 [(R)- or (S)-alanine], attached to the backbone, produces an extended or bent conformation in the pendant resulting in two scaffolds with different stretching degree, the second dihedral angle at chiral residue 2 [(R)- or (S)-methoxyphenylacetamide] places the substituents of this chiral center in a different spatial orientation, originating opposite helical senses at the polymer that are induced through a total control of the “chiral overpass effect”
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Dissymmetric Chiral Poly(diphenylacetylene)s: Secondary Structure Eluci

  • Tarrío Cordeiro, Juan José
  • Rodríguez, Rafael
  • Fernández Rodríguez, Berta
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
The 3D helix adopted by a non-symmetric substituted poly(diphenylacetylene) (PDPA) is elucidated, and its ability to self-assemble into nanospheres or fiber-like structures under the right conditions is also demonstrated. Moreover, by conformational changes in the pendant group it is possible to produce a helix inversion in the PDPA and create a circular polarized luminescence (CPL) switch. The secondary structure of a dissymmetric and chiral poly(diphenylacetylene) (PDPA) is elucidated by combining the data from NMR experiments (regioregular head to tail structure), Raman and IR studies (E configuration of the polyene double bonds), and high-resolution AFM images (helical pitch, packing angle and orientation of the external helix). As a result, an E-transoidal polyene backbone describing three coaxial helices is obtained. Theoretical electronic circular dichroism (ECD) studies of the structure show a good correspondence between experimental and theoretical data and allow one to decipher that the first Cotton band is generated by the poly(diphenylacetylene) core and not only by the polyene backbone. The dynamic behavior of poly-(S)-2 is also demonstrated by a helix inversion effect produced by conformational changes at the pendant groups when annealed in solvents with different donor abilities. This phenomenon is accompanied by an inversion of the circular polarized luminescence of the PDPA (CPL switch)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Stereocomplex Nanocomposite Switch Based on Dynamic Helical Polymer-Gold and Silver Nanoparticle Hybrid Materials

  • Núñez Martínez, Manuel
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Controlled ON/OFF stereocomplexation of dynamic helical polymer-metal nanoparticle nanocomposites─poly(phenylacetylene)-MNP nanocomposites (M = Au or Ag)─is presented. These novel hybrid materials can be found either as well-dispersed metal nanoparticles (MNPs) (stereocomplex OFF) or as fiber-like aggregates (stereocomplex ON) with the metal nanoparticles distributed along the material. A stereocomplex-MNP nanocomposite is formed by the interaction of two complementary and enantiomeric helical polymer-MNP nanocomposites [Poly-(R)-1-M1NPs/poly(S)-1-M2NPs (M1 = M2 or M1 ≠ M2; M = Au, Ag)]. Interestingly, by using dynamic helical polymers, i.e., poly(phenylacetylene)s (PPAs), as coating agents of the metal nanoparticles, it is possible to tune the secondary structure of the polymer─elongation and/or compression─a fact that can trigger the formation/disruption of the stereocomplex. Moreover, the stereocomplexation of these nanocomposites can be controlled in a reversible way (ON/OFF) by playing with the supramolecular interactions that keep the two enantiomeric and complementary helices together, such as hydrogen bonds
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Dynamic chiral PPA–AgNP nanocomposites: aligned silver nanoparticles decorating helical polymers

  • Núñez Martínez, Manuel
  • Arias López, Sandra
  • Quiñoá Cabana, Emilio
  • Riguera Vega, Ricardo
  • Freire Iribarne, Félix Manuel
A novel approach to prepare stimulus-sensitive nanocomposites is described, based on a dynamic helical polymer, chiral poly(phenylacetylene) (PPA), and silver nanoparticles. To preserve the dynamic helical behavior of PPA within the nanocomposite, a weak and adaptive supramolecular interaction, such as that between amide group–silver nanoparticle, is used to link the metal nanoparticle to the polymer. To prepare the composite, we chose PPA as a helical polymer that bears an amide group as a monomer repeating unit, poly-(R)-1, which can coordinate with Ag+ ions. The silver ions that form complexes with the pendant groups are further reduced, through the use of NaBH4, to AgNPs that are stabilized by the amide groups of PPA. As a result, 2.8 nm silver nanoparticles are formed and aligned along the polymer chain with a regular 3.1 nm interparticle distance corresponding to the helical pitch of the polymer. The weak amide/AgNP interactions allow PPA to adopt either P or M helical structures on the AgNPs through supramolecular adaptive mechanisms induced by appropriate external stimuli
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

The role of Polymer–AuNP interaction in the stimuli-response properties of PPA–AuNP nanocomposites

  • Núñez Martínez, Manuel
  • Díaz Arias, Sandra Natalia
  • Bergueiro Álvarez, Julián
  • Quiñoá Cabana, Emilio
  • Riguera Vega, Ricardo
  • Freire Iribarne, Félix Manuel
The helical sense control of dynamic helical polymers such as poly(phenylacetylene)s (PPAs) is greatly affected when they are conjugated to AuNPs through a strong thiol-Au connection, which restricts conformational changes at the polymer. Thus, the classical thiol-MNP bonds must be replaced by weaker ones, such as supramolecular amide–Au interactions. A straightforward preparation of the PPA–Au nanocomposite by reduction of a preformed PPA–Au3+ complex cannot be used due to a redox reaction between the two components of the complex which degrades the polymer. To avoid the interaction between the PPA and the Au3+ ions before the reduction takes place, the metal ions are added to the polymer solution capped as a TOAB complex, which keeps the PPA stable due to the lack of PPA–Au3+ interactions. Ulterior reduction of the Au3+ ions by NaBH4 affords the desired nanocomposite, where the AuNPs are stabilized by supramolecular anilide–AuNPs interactions. By using this approach, 3.7 nm gold nanoparticles are generated and aligned along the polymer chain with a regular distance between particles of 6 nm that corresponds to two helical pitches. These nanocomposites show stimuli-responsive properties and are also able to form macroscopically chiral nanospheres with tunable size
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

The role of the degree of polymerization in the chiroptical properties of dynamic asymmetric poly(diphenylacetylene)s

  • Tarrío Cordeiro, Juan José
  • Fernández Rodríguez, Berta
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Non-symmetric poly(diphenylacetylene)s (PDPAs) show a strong relationship between the size of the macromolecules and their electronic circular dichroism (ECD) spectra. Thus, polymers and oligomers of PDPAs with the same screw sense excess show opposite ECD spectra. This is due to the complex nature of the ECD spectra, where the main electronic transitions depend on the degree of polymerization (DP)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Dynamic Axial-to-Helical Communication Mechanism in Poly[(allenylethynylenephenylene)acetylene]s under External Stimuli

  • Lago Silva, María
  • Cid, María Magdalena
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Helix inversion in chiral dynamic helical polymers is usually achieved by conformational changes at the pendant groups induced through external stimuli. Herein, a different mechanism of helix inversion in poly(phenylacetylene)s (PPAs) is presented, based on the activation/deactivation of supramolecular interactions. We prepared poly[(allenylethynylenephenylene)acetylene]s (PAEPAs) in which the pendant groups are conformationally locked chiral allenes. Therefore, their substituents are placed in specific spatial orientations. As a result, the screw sense of a PAEPA is fixed by the allenyl substituent with the optimal size/distance relationship to the backbone. This helical sense command can be surpassed by supramolecular interactions between another substituent on the allene and appropriate external stimuli, such as amines. So, a helix inversion occurs through a novel axial-to-helical communication mechanism, opening a new scenario for taming the helices of chiral dynamic helical polymers
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Diastereomeric multi-chiral pendant groups: their key role in stimuli-responsive polymeric responses

  • Rodríguez Riego, Rafael
  • Rivadulla Cendal, Elena
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Chiral information transmission in helical polymers bearing multi-chiral pen-dant groups is usually determined by the absolute configuration of the first chi-ral center. The second chiral residue usually has low-to-null influence in themacromolecular handedness of the polymer, due to its remote position respectto the polyene main chain. Here, we demonstrate how the stimuli responsiveproperties of diastereomeric polymers, obtained by changing the absolute con-figuration of the second chiral center, are different due to the unlike propertiesof diastereoisomers
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

P/M Macromolecular Switch Based on Conformational Control Exerted by an Achiral Side Chain within an Axially Chiral Locked Pendant

  • Lago Silva, María
  • Cid, María Magdalena
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Molecular switches, supramolecular chemistry, and polymers can be combined to create stimuli-responsive multichiral materials. Therefore, by acting on the extended/bent conformational composition of an achiral arm, it is possible to create a macromolecular gear, where different supramolecular interactions can be activated/deactivated to control the helical sense of a polymer containing up to five different chiral axial motifs. For this, a chiral allene with a flexible achiral arm was introduced as a pendant in poly(phenylacetylene). Through flexible arm control between extended and bent conformations, it is possible to selectively induce either a P or M helical sense in the polymer, while the relative spatial distribution of the substituents in the allene remains unaltered in two perpendicular planes (configurationally locked). These results show that complex dynamic multichiral materials can be obtained by the polymerization of appropriate monomers that combine chirality, switching properties, and the ability to generate chiral supramolecular assemblies.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Tuning the helical sense and elongation of polymers through the combined action of the two components of tetraalkylammonium-anion salts

  • Leiras Fernández, Seila
  • Suárez Picado, Esteban
  • Quiñoá Cabana, Emilio
  • Riguera Vega, Ricardo
  • Freire Iribarne, Félix Manuel
The helical sense and elongation of a helical polymer that bears the 4-ethynylanilide of (R)-α‑methoxy-α-phenylacetic acid [m-(R)-1] can be tuned by the action of the two components of tetraalkylammonium-anion salts. Thus, while the supramolecular PPA-anilide/anion interaction creates a chiroptical switch, inducing either P or M helical senses in the poly(phenylacetylene) (PPA) depending on the nature of the anion —P helix: fluoride (F−) or cyanide (CN−); M helix: acetate (OAc−), benzoate (OBz−) or azide (N3−)—, deprotonation of the anilide group by these anions in dry conditions makes it possible to play with the elongation of the PPA, depending on the size of the tetraalkylammonium group, which results in a colorimetric switch. Thus, a color change from yellow to deep red is obtained by deprotonation of the anilide group when a tetraabutylammonium salt is used, while yellow/light-red and yellow/orange color changes are obtained when the size of the tetraalkylammonium group is reduced. Structural and mechanistic studies confirm that the color change occurs when the counterion accommodates itself close to the pendant group once the anilide hydrogen is removed. This PPA/tetraalkylammonium association is responsible of elongation changes in the PPA and therefore on the conjugation of the polyene backbone that is accompanied with color changes. Moreover, this colorimetric switch also operates in the solid state and can be switched in a vacuum/air moisture cycle
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Merging supramolecular and covalent helical polymers: four helices within a single scaffold

  • Fernández Villar, Zulema
  • Fernández Rodríguez, Berta
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Supramolecular and covalent polymers share multiple structural effects such as chiral amplification, helical inversion, sergeants and soldiers, or majority rules, among others. These features are related to the axial helical structure found in both types of materials, which are responsible for their properties. Herein a novel material combining information and characteristics from both fields of helical polymers, supramolecular (oligo(p-phenyleneethynylene) (OPE)) and covalent (poly(acetylene) (PA)), is presented. To achieve this goal, the poly(acetylene) must adopt a dihedral angle between conjugated double bonds (ω1) higher than 165°. In such cases, the tilting degree (Θ) between the OPE units used as pendant groups is close to 11°, like that observed in supramolecular helical arrays of these molecules. Polymerization of oligo[(p-phenyleneethynylene)n]phenylacetylene monomers (n = 1, 2) bearing L-decyl alaninate as the pendant group yielded the desired scaffolds. These polymers adopt a stretched and almost planar polyene helix, where the OPE units are arranged describing a helical structure. As a result, a novel multihelix material was prepared, the ECD spectra of which are dominated by the OPE axial array
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Conformational Kinetics in Chiral Poly(diphenylacetylene)s: A Dynamic P/M Memory Effect

  • Tarrío, Juan José
  • Rodríguez Riego, Rafael
  • Crassous, Jeanne
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Dynamic P/M (plus/minus) helical memory in chiral dissymmetric poly(diphenylacetylene)s (PDPA) is shown using a PDPA that bears the benzamide of (L)-alanine methyl ester as pendant. For a single chiral polymer, it is possible to obtain either P or M helical structures in a specific solvent without the presence of any chiral external stimuli. To do that, it is necessary to combine the conformational control at the pendant group with a high steric hindrance at the backbone. In this case, by thermal annealing in low-polar solvents, an anti-conformer is stabilized at the pendant which commands a P helix in the PDPA. Next, solvent removal followed by addition of a polar solvent such as dimethyl sulfoxide (DMSO), results in the kinetic conformationally trapped P helix. However, in this medium, the preferred handedness and the thermodynamic macromolecular helix for poly-(L)-1 is M. This process also occurs in the opposite way. Electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) studies show that the dynamic memory effect is present both in ground and excited states
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Photostability and dynamic helical behavior in chiral poly(phenylacetylene)s with a preferred screw-sense

  • Rey Tarrío, Francisco
  • Guisán Ceinos, Santiago
  • Cuerva Carvajal, Juan Manuel
  • Miguel Álvarez, Delia
  • Ribagorda Lobera, María
  • Quiñoá Cabana, Emilio
  • Freire Iribarne, Félix Manuel
Photostability of poly(phenylacetylene) (PPA) derivatives is closely linked to the dynamic helical behavior of the polyene scaffold. Quasi-static PPAs are stable under light exposure, while a photochemical electrocyclization is produced in dynamic PPAs. Helical polymers such as poly(phenylacetylene)s (PPAs) are interesting materials due to the possibility of tuning their helical scaffold (sense and elongation) once they have been prepared and by the presence of external stimuli. The main limitation in the application of PPAs is their poor photostability. These polymers degrade under visible light exposure through a photochemical electrocyclization process. In this work, it was demonstrated, through a selected example, how the photochemical degradation in PPAs is directly related to their dynamic helical behavior. Thus, while PPAs with dynamic helical structures show poor photostability under UV/Vis light exposure, poly-(R)-1, bearing an enantiopure sulfoxide group as pendant group and designed to have a quasi-static helical behavior, shows a large photostability due to the restricted conformational composition at the polyene backbone, needed to orient the conjugated double bonds prior to the photochemical electrocyclization process and the subsequent degradation of the material
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Dynamic axial‐to‐helical communication mechanism in poly[(allenylethynylenephenylene)acetylene]s under external stimuli

  • Lago Silva, María
  • Cid Fernández, María Magdalena
  • Quiñoá, Emilio
  • Freire, Félix
Helix inversion in chiral dynamic helical polymers is usually achieved by conformational changes at the pendant groups induced through external stimuli. Herein, a different mechanism of helix inversion in poly(phenylacetylene)s (PPAs) is presented, based on the activation/deactivation of supramolecular interactions. We prepared poly[(allenylethynylenephenylene)acetylene]s (PAEPAs) in which the pendant groups are conformationally locked chiral allenes. Therefore, their substituents are placed in specific spatial orientations. As a result, the screw sense of a PAEPA is fixed by the allenyl substituent with the optimal size/distance relationship to the backbone. This helical sense command can be surpassed by supramolecular interactions between another substituent on the allene and appropriate external stimuli, such as amines. So, a helix inversion occurs through a novel axial‐to‐helical communication mechanism, opening a new scenario for taming the helices of chiral dynamic helical polymers., Agencia Estatal de Investigación | Ref. PID2019-109733GB-I00, Agencia Estatal de Investigación | Ref. PID2021-128057NB-I00, Xunta de Galicia | Ref. ED431C 2022/21, Xunta de Galicia | Ref. ED431G 2019/03
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Tuning the Helical Sense and Elongation of Polymers Through the Combined Action of the Two Components of Tetraalkylammonium-Anion Salts

  • Leiras, Seila
  • Suárez Picado, Esteban
  • Quiñoá, Emilio
  • Riguera, Ricardo
  • Freire, Félix
[Abstract] The helical sense and elongation of a helical polymer that bears the 4-ethynylanilide of (R)-α methoxy-α-phenylacetic acid [m-(R)-1] can be tuned by the action of the two components of tetraalkylammonium-anion salts. Thus, while the supramolecular PPA-anilide/anion interaction creates a chiroptical switch, inducing either P or M helical senses in the poly(phenylacetylene) (PPA) depending on the nature of the anion —P helix: fluoride (F−) or cyanide (CN−); M helix: acetate (OAc−), benzoate (OBz−) or azide (N3−)—, deprotonation of the anilide group by these anions in dry conditions makes it possible to play with the elongation of the PPA, depending on the size of the tetraalkylammonium group, which results in a colorimetric switch. Thus, a color change from yellow to deep red is obtained by deprotonation of the anilide group when a tetraabutylammonium salt is used, while yellow/light-red and yellow/orange color changes are obtained when the size of the tetraalkylammonium group is reduced. Structural and mechanistic studies confirm that the color change occurs when the counterion accommodates itself close to the pendant group once the anilide hydrogen is removed. This PPA/tetraalkylammonium association is responsible of elongation changes in the PPA and therefore on the conjugation of the polyene backbone that is accompanied with color changes. Moreover, this colorimetric switch also operates in the solid state and can be switched in a vacuum/air moisture cycle., Financial support from MINECO (PID2019-109733GB-I00), Xunta de Galicia (ED431C 2018/30; Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09 and the European Regional Development Fund (ERDF) is gratefully acknowledged. We also thank Servicio de Nanotecnología y Análisis de Superficies (CACTI, UVIGO), Xunta de Galicia; ED431C 2018/30, Xunta de Galicia; ED431G/09