Skip to main content

CONTRIBUCION AL DESARROLLO Y FABRICACION DEL TRAZADOR DE STRIPS DE ATLAS PARA EL HL-LHC

PID2019-110189RB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of humidity sensitivity of silicon strip sensors for ATLAS upgrade tracker, pre- and post-irradiation

  • Fernández-Tejero, Javier
  • et al.,
  • Fleta, Celeste
  • Ullan, Miguel
During the prototyping phase of the new ATLAS Inner-Tracker (ITk) strip sensors, a degradation of the device breakdown voltage at high humidity was observed. Although the degradation was temporary, showing a fast recovery in dry conditions, the study of the influence of humidity on the sensor performance was critical to establish counter-measures and handling protocols during production testing in order to ensure the proper performance of the upgraded detector. The work presented here has the objective to study for the first time the breakdown voltage deterioration in presence of ambient humidity of ATLAS ITk production-layout strip sensors with different surface properties, before and after proton, neutron and gamma irradiations. A study of the humidity sensitivity of miniature ATLAS ITk strip sensors, before and after proton irradiations, is also presented to compare the sensitivity of devices with different sizes. The sensors were also exposed for several days to high humidity with the aim to recreate and evaluate the influence of the detector integration environment expected during the Large Hadron Collider (LHC) Long Shutdown 3 (LS3) in 2026, where the sensors will be exposed to ambient humidity for prolonged times., We gratefully acknowledge Y. Abo, S. Kamada, K. Yamamura, and the team of engineers of HPK for their highly productive work on the designs, layouts, close communication and collaboration. The work at Carleton University, Simon Fraser University (SFU), TRIUMF, and University of Toronto was supported by the Canada Foundation for Innovation and the Natural Science and Engineering Research Council of Canada. The work at Centro Nacional de Microelectrónica (IMB-CNM, CSIC) is part of the Spanish R&D grant PID2019-110189RB-C22, funded by MCIN/AEI/10.13039/501100011033. The work at Santa Cruz Institute for Particle Physics (SCIPP) was supported by the US Department of Energy, grant DE-SC0010107. The work in Prague was supported by the Ministry of Education, Youth and Sports of the Czech Republic coming from the projects LTT17018 Inter-Excellence and LM2018104 CERN-CZ and by Charles University grant GAUK 942119. We acknowledge the support provided by the gamma irradiation facility UJP, Praha, a. s. (Czech Republic). The authors would also like to thank the crew at the TRIGA reactor in Ljubljana for help with the irradiation of the detectors. The Authors acknowledge the financial support from the Slovenian Research Agency (research core funding No. P1_0135)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of irradiation and annealing performed with bias voltage applied across the coupling capacitors on the interstrip resistance of ATLAS ITk silicon strip sensors

  • Kroll, J.
  • Allport, P. P.
  • Chisholm, A.
  • Dudáš, D.
  • Fadeyev, V.
  • George, W.
  • Gonella, L.
  • Kopsalis, I.
  • Kvasnička, J.
  • Latoňová, V.
  • Lomas, J.
  • Martinez-Mckinney, F.
  • Mikeštíková, M.
  • Shi, X.
  • Tůma, P.
  • Ullán Comes, Miguel
  • Unno, Y.
The powering configuration of the silicon strip modules developed for the new Inner Tracker of the ATLAS experiment includes a voltage of up to 0.5 V across the coupling capacitor of each individual strip. However, this voltage is usually not applied in the sensor irradiation studies due to the significant technical and logistical complications. To study the effect of an irradiation and a subsequent beneficial annealing on the strip sensors in real experimental conditions, four prototype ATLAS17LS miniature sensors were irradiated by 60Co source and annealed, both with and without the bias voltage of 0.5 V applied across the coupling capacitors. The values of interstrip resistance measured on irradiated samples before and after annealing indicate that increase of radiation damage caused by the applied voltage can be compensated by the presence of this voltage during annealing., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of the polysilicon resistor in silicon strip sensors for ATLAS inner tracker as a function of temperature, pre- and post-irradiation

  • Latoňová, V.
  • Allport, P. P.
  • Bach, Eric
  • Bernabeu, J.
  • Chisholm, A.
  • Cindro, V.
  • Fadeyev, V.
  • Federičová, P.
  • Fernández-Tejero, Javier
  • George, W.
  • Gonella, L.
  • Hara, K.
  • Hirose, S.
  • Ishii, T.
  • Knight, T.
  • Kopsalis, I.
  • Kroll, J.
  • Kvasnička, J.
  • Lacasta, C.
  • Lomas, J.
  • Mandić, I.
  • Mikeštíková, M.
  • Orr, R. S.
  • Rossi, E.
  • Solaz, C.
  • Soldevila, U.
  • Ullán Comes, Miguel
  • Unno, Y.
The high luminosity upgrade of the Large Hadron Collider, foreseen for 2029, requires the replacement of the ATLAS Inner Detector with a new all-silicon Inner Tracker (ITk). The expected ultimate total integrated luminosity of 4000 fb−1 means that the strip part of the ITk detector will be exposed to the total particle fluences and ionizing doses reaching the values of 1.6⋅1015MeVneq/cm2 and 0.66MGy, respectively, including a safety factor of 1.5. Radiation hard n+-in-p micro-strip sensors were developed by the ATLAS ITk strip collaboration and are produced by Hamamatsu Photonics K.K. The active area of each ITk strip sensor is delimited by the n-implant bias ring, which is connected to each individual n+ implant strip by a polysilicon bias resistor. The total resistance of the polysilicon bias resistor should be within a specified range to keep all the strips at the same potential, prevent the signal discharge through the grounded bias ring and avoid the readout noise increase. While the polysilicon is a ubiquitous semiconductor material, the fluence and temperature dependence of its resistance is not easily predictable, especially for the tracking detector with the operational temperature significantly below the values typical for commercial microelectronics. Dependence of the resistance of polysilicon bias resistor on the temperature, as well as on the total delivered fluence and ionizing dose, was studied on the specially-designed test structures called ATLAS Testchips, both before and after their irradiation by protons, neutrons, and gammas to the maximal expected fluence and ionizing dose. The resistance has an atypical negative temperature dependence. It is different from silicon, which shows that the grain boundary has a significant contribution to the resistance. We discuss the contributions by parameterizing the activation energy of the polysilicon resistance as a function of the temperature for unirradiated and irradiated ATLAS Testchips., Peer reviewed