Skip to main content

DISEÑO DE NANOBOTS DE CONTROL SENCILLO BASADOS EN AUTOENSAMBLAJE MOLECULAR ESPONTANEO

PID2019-111327GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Uncovering the mechanisms of cyclic peptide self-assembly in membranes with the chirality-aware MA(R/S)TINI forcefield

  • Cabezón Vizoso, Alfonso
  • Calvelo Souto, Martín
  • Granja Guillán, Juan Ramón
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
Cyclic peptides (CPs) formed by alternation of D- and L-amino acids (D,L-CPs) can self-assemble into nanotubes (SCPNs) by parallel or/and antiparallel stacking. Different applications have been attributed to these nanotubes, including the disruption of lipid bilayers of specific compositions and the selective transport of ions throughout membranes. Molecular dynamics (MD) simulations have significantly contributed to understand the interaction between CPs, including the structural, dynamic and transport properties of their supramolecular aggregates. The high computational cost of atomic resolution forcefields makes them impractical for simulating the self-assembly of macromolecules, so coarse-grained (CG) models might represent a more feasible solution for this purpose. However, general CG models used for the simulation of biomolecules such as the MARTINI forcefield do not explicitly consider the non-covalent interactions leading to the formation of secondary structure patterns in proteins. This becomes particularly important in the case of CPs due to the D- and L-chirality alternation in their sequence, leading to opposite orientations of the backbone polar groups on both sides of the cyclic ring plane. In order to overcome this limitation, we have extended the MARTINI forcefield to introduce chirality in each residue of the CPs. The new parametrization, which we have called MA(R/S)TINI, reproduces the expected self-assembly patterns for several CP sequences in the presence of different membrane models, explicitly considering the chirality of the CPs and with no significant extra computational cost. Our simulations provide new mechanistic information of how these systems self-assemble in presence of different lipid scenarios, showing that the CP-CP and CP-membrane interactions are sensitive to the peptide sequence chirality. This opens the door to design new bioactive CPs based on CG-MD simulations. A web-based tool for the automatic parameterization of new CP sequences using MA(R/S)TINI, among other functionalities, is under construction (see http://cyclopep.com)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Study of the interaction of folic acid-modified gold nanorods and fibrinogen through microfluidics: implications for protein adsorption, incorporation and viability of cancer cells

  • Orellana, Nacaroha
  • Palma, Sujey
  • Torres, Estefanía
  • Vio, Valentina
  • Ruso Beiras, Juan Manuel
  • Juárez, Josué
  • Topete, Antonio
  • Araya, Eyleen
  • Vasques Contreras, Rodrigo
  • Kogan, Marcelo J.
  • Hassan, Natalia
Gold nanoparticles (GNPs) are an attractive nanomaterial for potential applications in therapy and diagnostics due to their capability to direct toward specific sites in the organism. However, when exposed to plasma, GNPs can interact with different biomolecules that form a dynamic nano-bio interface called a “protein corona” (PC). Remarkably, the PC could affect multiple biological processes, such as cell targeting and uptake, cytotoxicity, and nanoparticle (NP) clearance. The interaction of nanomaterials with plasmatic proteins has been widely studied under bulk conditions, however, under dynamic conditions, it has just recently been explored. Thus, to mimic a dynamic natural environment found in arteries and veins, microfluidic devices were used. In this work, gold nanorods (GNRs) were synthesized and conjugated with polyethylene glycol (PEG) to reduce their interaction with plasma proteins and increase their biocompatibility. Then, GNRs were functionalized with folic acid, a targeting ligand typically used to recognize tumor cells. The resulting nanosystem was exposed to fibrinogen (FB) to study the development and biological impact of PC formation through two strategies: bulk and laminar flow conditions. The obtained nanosystems were characterized by absorption spectrophotometry, DLS, laser Doppler microelectrophoresis, neutron activation analysis, circular dichroism spectroscopy and TEM. Finally, cell viability and cellular uptake assays were performed to study the influence of the PC on the cell viability and delivery of nanosystems.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

NIR-Reflective and Hydrophobic Bio-Inspired Nano-Holed Configurations on Titanium Alloy

  • Belén, Federico
  • Gravina, Noel
  • Pistonesi, Marcelo F.
  • Ruso Beiras, Juan Manuel
  • García, Nicolás A.
  • Prado, Fernando Daniel
  • Messina, Paula V.
Near-infrared (NIR) radiation plays an important role in guided external stimulus therapies; its application in bone-related treatments is becoming more and more frequent. Therefore, metallic biomaterials that exhibit properties activated by NIR are promising for further orthopedic procedures. In this work, we present an adapted electroforming approach to attain a biomorphic nano-holed TiO2 coating on Ti6Al4V alloy. Through a precise control of the anodization conditions, structures revealed the formation of localized nano-pores arranged in a periodic assembly. This specific organization provoked higher stability against thermal oxidation and precise hydrophobic wettability behavior according to Cassie–Baxter’s model; both characteristics are a prerequisite to ensure a favorable biological response in an implantable structure for guided bone regeneration. In addition, the periodically arranged sub-wavelength-sized unit cell on the metallic–dielectric structure exhibits a peculiar optical response, which results in higher NIR reflectivity. Accordingly, we have proved that this effect enhances the efficiency of the scattering processes and provokes a significant improvement of light confinement producing a spontaneous NIR fluorescence emission. The combination of the already favorable mechanical and biocompatibility properties of Ti6Al4V, along with suitable thermal stability, wetting, and electro-optical behavior, opens a promising path toward strategic bone therapeutic procedures.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Transmembrane Self-Assembled Cyclic Peptide Nanotubes Based on α-Residues and Cyclic δ-Amino Acids: A Computational Study

  • Blanco González, Alexandre
  • Calvelo Souto, Martín
  • Garrido, Pablo F.
  • Amorín López, Manuel
  • Granja Guillán, Juan Ramón
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
Self-assembling cyclic peptide nanotubes have been shown to function as synthetic, integral transmembrane channels. The combination of natural and nonnatural aminoacids in the sequence of cyclic peptides enables the control not only of their outer surface but also of the inner cavity behavior and properties, affecting, for instance, their permeability to different molecules including water and ions. Here, a thorough computational study on a new class of self-assembling peptide motifs, in which δ-aminocycloalkanecarboxylic acids are alternated with natural α-amino acids, is presented. The presence of synthetic δ-residues creates hydrophobic regions in these α,δ-SCPNs, which makes them especially attractive for their potential implementation in the design of new drug or diagnostic agent carrier systems. Using molecular dynamics simulations, the behavior of water molecules, different ions (Li+, Na+, K+, Cs+, and Ca2+), and their correspondent counter Cl− anions is extensively investigated in the nanoconfined environment. The structure and dynamics are mutually combined in a diving immersion inside these transmembrane channels to discover a fascinating submarine nanoworld where star-shaped water channels guide the passage of cations and anions therethrough.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Mapping the underlying mechanisms of fibrinogen benzothiazole drug interactions using computational and experimental approaches

  • González Durruthy, Michael
  • Scanavachi, Gustavo
  • Rial Silva, Ramón
  • Liu, Zhen
  • Cordeiro, M. Natália D. S.
  • Itri, Rosangela
  • Ruso Beiras, Juan Manuel
Three-dimensional conformational crystallographic binding-modes are of paramount importance to understand the docking mechanism of protein-ligand interactions and to identify potential “leading drugs” conformers towards rational drugs-design. Herein, we present an integrated computational-experimental study tackling the problem of multiple binding modes among the ligand 3-(2-Benzothiazolylthio)-propane sulfonic acid (BTS) and the fibrinogen receptor (E-region). Based on molecular docking simulations, we found that the free energy of binding values for nine of different BTS-docking complexes (i.e., BTS-pose_1–9) were very close. We have also identified a docking-mechanism of BTS-interaction mainly based on non-covalent hydrophobic interactions with H-bond contacts stabilizing the fibrinogen-BTS docking complexes. Interestingly, the different BTS-poses_1–9 were found to be able to block the fibrinogen binding site (E-region) by inducing local perturbations in effector and allosteric residues, reducing the degree of collectivity in its flexibility normal modes. As such, we theoretically suggest that the BTS-binding modes can significantly affect the physiological condition of the unoccupied fibrinogen protein structure by bringing global and local perturbations in the frequency domain spectra. The proposed theoretical mechanisms, the interactions involved and the conformational changes suggested, were further corroborated by different experimental techniques such as isothermal titration calorimetry (ITC), zeta potential, UV–vis, fluorescence and small angle X-ray scattering (SAXS). The combined results shall open new avenues towards the application of complex supra-molecular information in rational drugs-design.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Inverse Conformational Selection in Lipid–Protein Binding

  • Bacle, Amélie
  • García Fandiño, Rebeca
  • Ferreira, Tiago M.
  • Piñeiro Guillén, Ángel
  • Virtanen, Salla I.
Interest in lipid interactions with proteins and other biomolecules is emerging not only in fundamental biochemistry but also in the field of nanobiotechnology where lipids are commonly used, for example, in carriers of mRNA vaccines. The outward-facing components of cellular membranes and lipid nanoparticles, the lipid headgroups, regulate membrane interactions with approaching substances, such as proteins, drugs, RNA, or viruses. Because lipid headgroup conformational ensembles have not been experimentally determined in physiologically relevant conditions, an essential question about their interactions with other biomolecules remains unanswered: Do headgroups exchange between a few rigid structures, or fluctuate freely across a practically continuous spectrum of conformations? Here, we combine solid-state NMR experiments and molecular dynamics simulations from the NMRlipids Project to resolve the conformational ensembles of headgroups of four key lipid types in various biologically relevant conditions. We find that lipid headgroups sample a wide range of overlapping conformations in both neutral and charged cellular membranes, and that differences in the headgroup chemistry manifest only in probability distributions of conformations. Furthermore, the analysis of 894 protein-bound lipid structures from the Protein Data Bank suggests that lipids can bind to proteins in a wide range of conformations, which are not limited by the headgroup chemistry. We propose that lipids can select a suitable headgroup conformation from the wide range available to them to fit the various binding sites in proteins. The proposed inverse conformational selection model will extend also to lipid binding to targets other than proteins, such as drugs, RNA, and viruses.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Corona VRus Coaster: the virtual reality roller coaster of the proteins of SARS‑CoV‑2

  • Seco González, Alejandro
  • Porto Vence, César
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
The COVID-19 pandemic, caused by SARS-CoV-2, has driven significant research into the virus’ structural components to elucidate its infection mechanisms and advance therapeutic strategies. However, the intricate architecture of viral proteins presents challenges for researchers and students in structural biology. To address this, we developed Corona VRus Coaster, a virtual reality (VR) application designed to facilitate molecular visualization. This tool enables immersive exploration of over 2000 viral proteins, including key structures such as the spike protein, nucleocapsid protein, main protease, and RNA-dependent RNA polymerase. Users can “ride” along the molecular backbones of these proteins, offering a distinctive way to explore their three-dimensional organization. Hand-tracking technology provides an intuitive interface for real-time interaction, while multiple visualization and navigation modes enhance the exploration experience. This application offers a novel and engaging approach to structural biology, supporting both research and education by making molecular structures more accessible and interactive. Corona VRus Coaster is available for download at http://mduse.com/coronavruscoaster.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Simple approximation for aggregation number determination by isothermal titration calorimetry: STAND-ITC

  • Fernández Garrido, Pablo
  • Rodriguez-Dafonte, Pedro
  • García Río, Luis
  • Piñeiro Guillén, Ángel
A new proposal to obtain aggregation numbers from isothermal titration calorimetry dilution experiments is described and tested using dodecyl trimethyl ammonium bromide, dodecyl methylimidazolium chloride, dodecyl methylimidazolium sulfonate, and didecyl methylimidazolium chloride aqueous solutions at different temperatures. The results were compared to those obtained from fluorescence measurements and also with data from the literature. In addition to the aggregation number, the molar free energy to transfer a solute molecule from the aggregate to the bulk solution, the enthalpy corresponding to the formation of the self-assembled suprastructures, the molar heat corresponding to the dilution of monomers and aggregates, and an offset parameter to account for unpredictable external contributions are simultaneously obtained using the same method. The new equations are compared to those obtained from previous proposals, and they are also analyzed in detail to assess the impact of each fitting parameter in the profile of the calorimetric isotherm. This new approach has been implemented in a computational code that automatically determines the fitting parameters as well as the corresponding statistical uncertainties for the large variety of calorimetric profiles that have been tested. Given the high sensitivity of the dilution experiments to the aggregation number for relatively small assemblies, our approach is proposed also to quantify the oligomerization state of biomolecules such as proteins and peptides
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

MA(R/S)TINI 3: An Enhanced Coarse-Grained Force Field for Accurate Modeling of Cyclic Peptide Self-Assembly and Membrane Interactions

  • Cabezón Vizoso, Alfonso
  • García Fandiño, Rebeca
  • Piñeiro Guillén, Ángel
Self-assembled nanotubes (SCPNs) formed by alternating chirality α-Cyclic Peptides (d,l-α-CPs) have presented interesting biological applications, such as antimicrobial activity or ion transmembrane transport. Due to difficulties to follow these processes with experimental techniques, Molecular Dynamics (MD) simulations have been commonly used to understand the mechanism that led to their biological activity. However, the high computational cost of atomic resolution simulations makes them unsuitable for simulating dynamic processes involving multiple units like their self-assembly in different environments. In this regard, coarse-grain (CG) models might represent a more feasible option. However, general coarse-grained force fields such as MARTINI do not explicitly account for noncovalent interactions, such as hydrogen bonding, which are essential for secondary structure formation and the self-assembly of proteins and peptides. This problem becomes particularly important when simulating CPs due to the specific directionality of their interactions. In a previous work, it has been proven how MARTINI classical parametrization overestimated the self-assembly of CPs not distinguishing parallel and antiparallel interactions as well as allowing forbidden rotational angles. The so-called MA(R/S)TINI force field fixed the problem by including two extra particles into the backbone bead while preserving the behavior of several CP sequences in the presence of different membrane models. However, this new parametrization presented a much higher CP–CP interaction energy, being another critical issue for self-assembly overestimation. The release of MARTINI 3 expanded the scope of the force field by introducing new particles and labels specifically tailored to improve the representation of noncovalent interactions. Nevertheless, since it uses the same mapping strategy for protein backbones, this new version also failed at capturing the specific directionality of CPs. Taking advantage of the new possibilities offered by MARTINI 3, MA(R/S)TINI has been updated in the present work. This new version uses a new mapping of CPs based on original beads of the force field and releases the restraints previously imposed on the lateral side chains of the CPs. This new parameterization fixes the formerly overestimated interaction energy between CPs in both parallel and antiparallel orientations, while preserving the advantages of the previous version of MA(R/S)TINI. The new parametrization provided in the present work is aimed to facilitate the understanding, design, and optimization of new bioactive CPs based on CG-MD simulations.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Remdesivir interactions with sulphobutylether-β-cyclodextrins: a case study using selected substitution patterns

  • Piñeiro Guillén, Ángel
  • Pipkin, James
  • Antle, Vince
  • García Fandiño, Rebeca
Modified cyclodextrins (CDs) consist of a distribution of different structures with different number and location of the substituted groups. Among the most important applications of these molecules is their use as an enabling excipient in pharmaceutical formulations to provide the necessary solubility, stability and bioavailability for a drug to be effectively used. The most typical interaction mechanism of small molecular groups with CDs is the formation of host–guest inclusion complexes. The thermodynamic affinity constant between CDs and drugs should not be too strong, since then the biological activity could be negated by the formation of the complex. In the opposite scenario, if the affinity constant is too weak, the complex is barely formed and the amount of CD required in the formulation may become too great. Thus, a balance between the affinity of the CD and the drug is necessary for an optimal formulation. Additionally in the case of modified CDs and specific drug complexes there are further questions concerning the effect that the locations and number of substitutions plays in complexation. In the present work, this question is explored by using sulphobutylether-β-cyclodextrin and remdesivir, the only antiviral medication currently approved by the United States Food and Drug Administration for treating COVID-19, as a case study. This paper presents results from an orthogonal study using isothermal titration calorimetry measurements and biased molecular dynamics simulations that provide complementary information. Isothermal titration calorimetry delves into the global impact of the species distribution while molecular dynamics simulations deals with specific chemical structures. The goal is to provide useful information to optimize pharmaceutical formulations based on modified CDs, specifically in the case of remdesivir, used to treat SARS-CoV-2 infection, although the main conclusions could be extended to the interaction of other drugs with modified cyclodextrins
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Role of nanostructured materials in hard tissue engineering

  • Rial Silva, Ramón
  • Liu, Zhen
  • Messina, Paula V.
  • Ruso Beiras, Juan Manuel
The rise in the use of biomaterials in bone regeneration in the last decade has exponentially multiplied the number of publications, methods, and approaches to improve and optimize their functionalities and applications. In particular, biomimetic strategies based on the self-assembly of molecules to design, create and characterize nanostructured materials have played a very relevant role. We address this idea on four different but related points: self-setting bone cements based on calcium phosphate, as stable tissue support and regeneration induction; metallic prosthesis coatings for cell adhesion optimization and prevention of inflammatory response exacerbation; bio-adhesive hybrid materials as multiple drug delivery localized platforms and finally bio-inks. The effect of the physical, chemical, and biological properties of the newest biomedical devices on their bone tissue regenerative capacity are summarized, described, and analyzed in detail. The roles of experimental conditions, characterization methods and synthesis routes are emphasized. Finally, the future opportunities and challenges of nanostructured biomaterials with their advantages and shortcomings are proposed in order to forecast the future directions of this field of research.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Simulating bacterial membrane models at the atomistic level: a force field comparison, Simulación de modelos de membranas bacterianas a nivel atómico: comparación de campos de fuerza

  • Blanco González, Alexandre
  • Wuri, Anika
  • Mendes Ferreira, Tiago
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
Molecular dynamics (MD) simulations are currently an indispensable tool to understand both the dynamic and nanoscale organization of cell membrane models. A large number of quantitative parameters can be extracted from these simulations, but their reliability is determined by the quality of the employed force field and the simulation parameters. Much of the work on parametrizing and optimizing force fields for biomembrane modeling has been focused on homogeneous bilayers with a single phospholipid type. However, these may not perform effectively or could even be unsuitable for lipid mixtures commonly employed in membrane models. This work aims to fill this gap by comparing MD simulation results of several bacterial membrane models using different force fields and simulation parameters, namely, CHARMM36, Slipids, and GROMOS-CKP. Furthermore, the hydrogen isotope exchange (HIE) method, combined with GROMOS-CKP (GROMOS-H2Q), was also tested to check for the impact of this acceleration strategy on the performance of the force field. A common set of simulation parameters was employed for all of the force fields in addition to those corresponding to the original parametrization of each of them. Furthermore, new experimental order parameter values determined from NMR of several lipid mixtures are also reported to compare them with those determined from MD simulations. Our results reveal that most of the calculated physical properties of bacterial membrane models from MD simulations are substantially force field and lipid composition dependent. Some lipid mixtures exhibit nearly ideal behaviors, while the interaction of different lipid types in other mixtures is highly synergistic. None of the employed force fields seem to be clearly superior to the other three, each having its own strengths and weaknesses. Slipids are notably effective at replicating the order parameters for all acyl chains, including those in lipid mixtures, but they offer the least accurate results for headgroup parameters. Conversely, CHARMM provides almost perfect estimates for the order parameters of the headgroups but tends to overestimate those of the lipid tails. The GROMOS parametrizations deliver reasonable order parameters for entire lipid molecules, including multicomponent bilayers, although they do not reach the accuracy of Slipids for tails or CHARMM for headgroups. Importantly, GROMOS-H2Q stands out for its computational efficiency, being at least 3 times faster than GROMOS, which is already faster than both CHARMM and Slipids. In turn, GROMOS-H2Q yields much higher compressibilities compared to all other parametrizations
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: surface tension from isothermal titration calorimetry

  • Fernández Garrido, Pablo
  • Bastos, Margarida
  • Velazquez-Campoy, Adrian
  • Amigo Pombo, Alfredo José
  • Dumas, Philippe
  • Piñeiro Guillén, Ángel
Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles’ formation and release. The new algorithm was tested with a range of different types of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Cyclodextrins: Establishing building blocks for AI-driven drug design by determining affinity constants in silico

  • Anderson, Amelia M.
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
  • O'Connor, Matthew S.
Cyclodextrins (CDs) are cyclic carbohydrate polymers that hold significant promise for drug delivery and industrial applications. Their effectiveness depends on their ability to encapsulate target molecules with strong affinity and specificity, but quantifying affinities in these systems accurately is challenging for a variety of reasons. Computational methods represent an exceptional complement to in vitro assays because they can be employed for existing and hypothetical molecules, providing high resolution structures in addition to a mechanistic, dynamic, kinetic, and thermodynamic characterization. Here, we employ potential of mean force (PMF) calculations obtained from guided metadynamics simulations to characterize the 1:1 inclusion complexes between four different modified βCDs, with different type, number, and location of substitutions, and two sterol molecules (cholesterol and 7-ketocholesterol). Our methods, validated for reproducibility through four independent repeated simulations per system and different post processing techniques, offer new insights into the formation and stability of CD-sterol inclusion complexes. A systematic distinct orientation preference where the sterol tail projects from the CD's larger face and significant impacts of CD substitutions on binding are observed. Notably, sampling only the CD cavity's wide face during simulations yielded comparable binding energies to full-cavity sampling, but in less time and with reduced statistical uncertainty, suggesting a more efficient approach. Bridging computational methods with complex molecular interactions, our research enables predictive CD designs for diverse applications. Moreover, the high reproducibility, sensitivity, and cost-effectiveness of the studied methods pave the way for extensive studies of massive CD-ligand combinations, enabling AI algorithm training and automated molecular design.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Rapid diagnosis and severity scale of post-COVID condition using advanced spectroscopy

  • Antelo Riveiro, Paula
  • Vázquez Vázquez, Manuel
  • Domínguez Santalla, María Jesús
  • Rodríguez Ruiz, Emilio
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
The COVID-19 pandemic has resulted in a persistent health challenge known as Post-COVID Condition (PCC), characterized by symptoms lasting at least three months after the initial SARS-CoV-2 infection and potentially persisting for several years. While studies on PCC using lipidomics and proteomics have been conducted, these methods are costly and time-consuming. The comprehensive analysis of UV–VIS–NIR–MIR spectroscopy is explored here as an alternative for the rapid and cheap diagnosis and quantification of the severity of PCC. Blood samples from 65 PCC patients, previously analyzed in lipidomic and proteomic studies, along with samples from 65 new patients, were examined to develop a model that quantifies the severity of PCC based solely on spectrophotometric data. Significant spectral variability was observed in the UV–VIS region, particularly between 297 and 600 nm, correlating strongly with patient symptoms. Unsupervised clustering algorithms in this spectral region effectively differentiated between asymptomatic and symptomatic patients, achieving a Jaccard similarity score of 0.667 when compared with clinical symptom classifications. Comparative analysis with proteomic and lipidomic studies indicated that UV–VIS spectroscopy captures clinically relevant biochemical information. The results of the model developed in this work to quantify the severity of PCC demonstrated robustness with new patient data, underscoring the method’s potential as a rapid, non-invasive, and cost-effective diagnostic tool. This study highlights the strengths of spectroscopic techniques, suggesting their suitability for widespread clinical application in diagnosing and monitoring PCC, and emphasizes the need for further refinement and integration of these methods into healthcare practice, particularly for their potential implementation in portable devices.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Aggregation versus inclusion complexes to solubilize drugs with cyclodextrins. A case study using sulphobutylether-β-cyclodextrins and remdesivir

  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
  • Pipkin, James
  • Antle, Vince
The formation of small hybrid aggregates between excipient and drug molecules is one of the mechanisms that contributes to the solubilization of active principles in pharmaceutical formulations. The characterization of the formation, governing interactions and structure of such entities is not trivial since they are highly flexible and dynamic, quickly exchanging molecules from one to another. In the case of cyclodextrins, this mechanism and the formation of inclusion complexes synergistically cooperate to favour the bioavailability of drugs. In a previous study we reported a detailed characterization of the possible formation of inclusion complexes with 1:1 stoichiometry between remdesivir, the only antiviral medication currently approved by the United States Food and Drug Administration for treating COVID-19, and sulphobutylether-β-cyclodextrins. Here we extend our study to assess the role of the spontaneous aggregation in the solubilization of the same drug, by molecular dynamics simulations at different relative concentrations of both compounds. The number of sulphobutylether substitutions in the cyclodextrin structure and two different protonation states of the remdesivir molecule are considered. We aim to shed light in the solubilization mechanism of sulphobutylether-β-cyclodextrins, broadly used as an excipient in many pharmaceutical formulations, in particular in the case of remdesivir as an active compound
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Exploring the conformational binding mechanism of fibrinogen induced by interactions with penicillin β-lactam antibiotic drugs

  • González Durruthy, Michael
  • Rial Silva, Ramón
  • Cordeiro, M. Natália D. S.
  • Liu, Zhen
  • Ruso Beiras, Juan Manuel
Herein, we present an integrated computational and experimental study to tackle the interactions between recognized β-lactam antibiotics (cloxacillin and dicloxacillin) with the fibrinogen blood plasma protein. For this purpose, molecular docking simulation with elastic network based on collective low-frequency normal modes and perturbation response scanning maps were proposed to evaluate the conformational binding mechanism of fibrinogen under the unbound and bound states with the cited β-lactam antibiotics. Aiming to theoretically explore the hidden biochemical mechanisms and structural attributes leading failures in therapy success with β-lactam antibiotics. The computational results pointing that despite these conformational differences, both antibiotics exhibit very similar affinity-based free energies of binding as FEB (cloxacillin/E-region) = − 8.7 kcal/mol and FEB (dicloxacillin/E-region) = −7.7 kcal/mol. We theoretically suggest that the semi-synthetic incorporation of an additional halogen CL-atom in the dicloxacillin, respect to cloxacillin molecule, and its relative docking-pose orientation in the fibrinogen E-region could significantly reduce the appearance of potential fibrinolytic off-target effects usually associated to parenterally administered β-lactam antibiotics. Besides, the performed interactions diagrams revealed that the most relevant antibiotic binding interactions with the fibrinogen E-region (pocket 1) are mainly based on hydrophobic (C···C)-backbone-side-chain non-covalent interactions, acceptor/donor interactions with critical regulatory E-region residues SER50:Q > SER50:N associated to allosteric modulation based long-distance-based perturbations (dicloxacillin > > cloxacillin) in the E-region (Q-chain > N-chain) with remarkable conformational rigidification by decreasing the intrinsic collectivity, and leading different pattern of perturbations as allosteric signal propagation in the intrinsic conformational dynamics under bound state from both β-lactam antibiotics. An experimental validation was carried out by using calorimetric (ITC and DSC) and spectroscopic (Raman and fluorescence) methods. These methods corroborated the computational results, adding quantitative information to explain the binding process. Finally, the obtained results open new perspectives for the “de novo rational drug-design” of new derivatives of β-lactam antibiotics with high pharmacodynamic selectivity/specificity to avoid side-effects toward to achieve optimal benefit/risk rates beyond the antibiotic drug resistance phenomena, favoring the implementation of rigorous criteria for a more personalized antibiotic therapy.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Classical Simulations on Quantum Computers: Interface-Driven Peptide Folding on Simulated Membrane Surfaces

  • Conde-Torres, Daniel
  • Mussa Juane, Mariamo
  • Faílde, Daniel
  • Gómez, Andrés
  • García Fandiño, Rebeca
  • Piñeiro Guillén, Ángel
Background: Antimicrobial peptides (AMPs) are crucial in the fight against infections and play significant roles in various health contexts, including cancer, autoimmune diseases, and aging. A key aspect of AMP functionality is their selective interaction with pathogen membranes, which often exhibit altered lipid compositions. These interactions are thought to induce a conformational shift in AMPs from random coil to alpha-helical structures, essential for their lytic activity. Traditional computational approaches have faced challenges in accurately modeling these structural changes, especially in membrane environments, thereby opening and opportunity for more advanced approaches. Method: This study extends an existing quantum computing algorithm, initially designed for peptide folding simulations in homogeneous environments, to address the complexities of AMP interactions at interfaces. Our approach enables the prediction of the optimal conformation of peptides located in the transition region between hydrophilic and hydrophobic phases, resembling lipid membranes. The new method was tested on three 10-amino-acid-long peptides, each characterized by distinct hydrophobic, hydrophilic, or amphipathic properties, across different media and at interfaces between solvents of different polarity. Results: The developed method successfully modeled the structure of the peptides without increasing the number of qubits required compared to simulations in homogeneous media, making it more feasible with current quantum computing resources. Despite the current limitations in computational power and qubit availability, the findings demonstrate the significant potential of quantum computing in accurately characterizing complex biomolecular processes, particularly AMP folding at membrane models. Conclusions: This research highlights the promising applications of quantum computing in biomolecular simulations, paving the way for future advancements in the development of novel therapeutic agents. We aim to offer a new perspective on enhancing the accuracy and applicability of biomolecular simulations in the context of AMP interactions with membrane models.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A comprehensive nomenclature system for cyclodextrins

  • Anderson, Amelia M.
  • O'Connor, Matthew S.
  • Pipkin, James
  • Malanga, Milo
  • Sohajda, Tamas
  • Loftsson, Thorsteinn
  • Szente, Lajos
  • García Fandiño, Rebeca
  • Piñeiro Guillén, Ángel
Modified cyclodextrins (CDs) are cyclic oligosaccharides with many applications in drug delivery, catalysis, and as active pharmaceutical ingredients. In general, they exist as distributions of structurally diverse molecules rather than single-isomer compounds. Their performance depends on the number of glucopyranose units (GPUs), and the type, number, and position of chemical substitutions in their hydroxyl groups. Effectively targeting individual species within these distributions is essential for optimizing CDs for specific applications. Computational techniques can generate large datasets to AI-driven structural optimization, but the absence of a standardized nomenclature system for modified CDs presents a major barrier to progress in this direction. This lack of consensus limits effective communication, data sharing, automation, and collaboration. To address this, a clear and extensible nomenclature for modified CDs is proposed. In this framework, GPUs are treated like amino-acid residues, with unsubstituted GPUs as reference building-blocks and substituted ones considered as mutations. This approach precisely defines substitution types and patterns, resolves cyclic permutation ambiguities, and offers versatility for both simple and complex modifications, including chiral center alterations and covalently linked CD oligomers. By introducing this standardized nomenclature, we aim to enhance molecular design, improve reproducibility, and streamline both experimental and computational research in the CD field.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Not so rigid capsids based on cyclodextrin complexes: keys to design

  • Suárez Lestón, Fabián
  • Fernández Garrido, Pablo
  • Piñeiro Guillén, Ángel
  • García Fandiño, Rebeca
Membranes based on cyclodextrin complexes can be used as functional nanocarrier envelopers by chemical modifications of the cyclodextrin hydroxyl groups or by encapsulating different ligands in their cavities. Experiments: Molecular dynamics simulations of monolayers and bilayers based on supramolecular complexes consisting of two α or β-cyclodextrin and one sodium dodecylsulfate or dodecane at 283 K and at 298 K were performed. Findings: It is shown that the structure and main interactions stabilizing the membranes, as well as their permeability to water and ions can be tuned by changing the cyclodextrin, the ligand, the number of layers or/and the temperature. These results provide new evidences about both their dynamic nature and the interactions responsible for the stabilization of the membranes and will facilitate the design of new functional capsides and applications based on cyclodextrin complexes
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Exploiting spatial isomerism to modulate the assembled phase and rheological response of compositionally identical sugar-based surfactants

  • Poon, Jia-Fei
  • Cabezón Vizoso, Alfonso
  • Gulotta, Alessandro
  • Mahmoudi, Najet
  • Ulvenlund, Stefan
  • García Fandiño, Rebeca
  • Sánchez Fernández, Adrián
For decades, extensive surfactant libraries have been developed to meet the requirements of downstream applications. However, achieving functional diversity has traditionally demanded a vast array of chemical motifs and synthetic pathways. Herein, a new approach for surfactant design based on structural isomerism is utilised to access a wide spectrum of functionalities. A library of C18-aliphatic maltosides was prepared through Koenigs–Knorr glycosylation, with their properties tuned through anomerism, stereoisomerism, regioisomerism, and the degree of tail unsaturation. Self-assembly of the amphiphiles gave rise to various morphologies, ranging from small micelles to large one-dimensional semiflexible assemblies, which were ultimately defined by the directionality of the supramolecular interactions imposed by the angular restraints of the isomeric centres. Remarkably, the microscopic phase determines the rheological behaviour of the system, which accesses Newtonian solutions, viscoelastic fluids, and gels with customised mechanical properties. The approach outlined in this study serves as a blueprint for the design of novel bioderived surfactants with diverse behaviours without altering the chemical composition of the surfactants, where the understanding of molecular interactions can potentially be used to predict and design the assembly and function of isomerically varied amphiphiles.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluid interface calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velázquez-Campoy, Adrián
  • Dumas, P.
  • Piñeiro, Ángel
11 pags., 6 figs., 1 tab., Hypothesis: Amphiphilic molecules spontaneously adsorb to fluid polar-nonpolar interfaces. The timescale of such adsorption depends on the molecular size and structure of the solute. This process should be accompanied by a power heat exchange that could be detected by commercial isothermal calorimeters. Experiments: Air is injected in the bulk of different aqueous solutions contained in the sample cell of an isothermal titration calorimeter. The formation of the resulting bubbles leads to a liquid/air interface to which the solute molecules spontaneously adsorb. Continuous injection experiments to produce multiple bubbles as well as experiments with static bubbles stand from the capillary tip, aiming to observe slow adsorption processes, were performed. Findings: The power associated with the formation, growth and release of air bubbles in different liquids was measured. Different independent contributions that can be associated to the pressure change in the gas phase, the evaporation-condensation of the solvent, the increase of interfacial area, the change in the heat capacity of the sample cell content, and the release of the bubble were observed. The periodic pattern produced by the continuous injection of air at a constant rate is used to determine the surface tension of different liquids, including solutions of different molecules and (bio)macromolecules., We would like to gratefully thank the help and support from Mike Brandts, from Malvern/Microcal, for the information pro-vided on the basic properties of VP-ITC instruments, as well asfrom Malin Suurkuusk and Peter Vikegard, from Waters/TA Instruments, for allowing us to use the calorimeters available in their lab.The authors thank the financial support of the Spanish Ministry ofEconomy and Competitiveness (projects MAT2015-71826-P to Á. P.and BFU2016-78232-P to A.V.C.), the Agencia Estatal de Investigación (AEI) (project PID2019-111327GB-I00 to Á. P.) and Fundação para a Ciência e Tecnologia (FCT), Portugal, for CIQUP(project UIDB/00081/2020 to M.B.). P. F. G. thanks the Spanish Ministry of Economy and Competitiveness and the European SocialFund for his predoctoral research grant, reference BES-2016-076761. These research projects were partially supported by European ERDF Funds (MCIU/AEI/FEDER, EU). Facilities provided by theGalician Supercomputing Centre (CESGA) are also acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: Surface tension from isothermal titration calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velázquez-Campoy, Adrián
  • Amigo, Alfredo
  • Dumas, Philippe
  • Piñeiro, Ángel
10 pags, 8 figs. -- Supplementary data to this article can be found online at https://doi.org/10.1016/j.jcis.2021.08.115., Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles’ formation and release. The new algorithm was tested with a range of different of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell., The authors thank the financial support of the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71826-P to A. P. and BFU2016-78232-P to A.V.C.), the Agencia Estatal de Investigacion (AEI) (project PID2019-111327GB-I00 to A. P.) and Fundacao para a Ciencia e Tecnologia (FCT), Portugal, for CIQUP (project UIDB/00081/2020 to M.B.). P. F. G. thanks the Spanish Ministry of Economy and Competitiveness and the European Social Fund for his predoctoral research grant, reference BES-2016076761. These research projects were partially supported by European ERDF Funds (MCIU/AEI/FEDER, EU). Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lipidomics signature in post-COVID patient sera and its influence on the prolonged inflammatory response

  • Garrido, P.F.
  • Castillo-Peinado, L.S.
  • Priego-Capote, F.
  • Barrio, I.
  • Piñeiro, Á.
  • Domínguez-Santalla, M.J.
  • Rodríguez-Ruiz, E.
  • Garcia-Fandino, R.
13 pags., 10 figs., 4 tabs., Background: The ongoing issues with post-COVID conditions (PCC), where symptoms persist long after the initial infection, highlight the need for research into blood lipid changes in these patients. While most studies focus on the acute phase of COVID-19, there's a significant lack of information on the lipidomic changes that occur in the later stages of the disease. Addressing this knowledge gap is critical for understanding the long-term effects of COVID-19 and could be key to developing personalized treatments for those suffering from PCC. Methods: We employed untargeted lipidomics to analyze plasma samples from 147 PCC patients, assessing nearly 400 polar lipids. Data mining (DM) and machine learning (ML) tools were utilized to decode the results and ascertain significant lipidomic patterns. Results: The study uncovered substantial changes in various lipid subclasses, presenting a detailed profile of the polar lipid fraction in PCC patients. These alterations correlated with ongoing inflammation and immune response. Notably, there were elevated levels of lysophosphatidylglycerols (LPGs) and phosphatidylethanolamines (PEs), and reduced levels of lysophosphatidylcholines (LPCs), suggesting these as potential lipid biomarkers for PCC. The lipidomic signatures indicated specific anionic lipid changes, implicating antimicrobial peptides (AMPs) in inflammation. Associations between particular medications and symptoms were also suggested. Classification models, such as multinomial regression (MR) and random forest (RF), successfully differentiated between symptomatic and asymptomatic PCC groups using lipidomic profiles. Conclusions: The study's groundbreaking discovery of specific lipidomic disruptions in PCC patients marks a significant stride in the quest to comprehend and combat this condition. The identified lipid biomarkers not only pave the way for novel diagnostic tools but also hold the promise to tailor individualized therapeutic strategies, potentially revolutionizing the clinical approach to managing PCC and improving patient care., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and the ERDF (RTI2018–098795-A-I00, PID2019–111327GB-I00, PID2019–111373RB-I00, PID2022-141534OB-I00 and PDC2022–133402-I00), by Xunta de Galicia and the ERDF (ED431F 2020/05, ED431B 2022/36 and Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09). The work of I.B. was financially supported in part by grants from the Departamento de Educación, Política Lingüística y Cultura del Gobierno Vasco [IT1456–22] and by the Ministry of Science and Innovation through BCAM Severo Ochoa accreditation [CEX2021–001142-S/MICIN/AEI/10.13039/501100011033] and through project [PID2020–115882RB-I00/AEI/10.13039/501100011033] funded by Agencia Estatal de Investigación and acronym “S3M1P4R" and also by the Basque Government through the BERC 2022–2025 program. We would like to thank Paula García Fandiño for her efficient and crucial work in gathering samples for this study
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: Surface tension from isothermal titration calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velazquez-Campoy, Adrian
  • Amigo, Alfredo
  • Dumas, Philippe
  • Pineiro, Angel
Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles'' formation and release. The new algorithm was tested with a range of different types of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell. (c) 2021 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).