Skip to main content

EVALUACION DE LA SEGURIDAD VIAL DE LA MICROMOVILIDAD

PID2019-111744RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Safe Infrastructure for Micromobility: The Current State of Knowledge

  • Hossein Sabbaghian, Morteza
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Major cities in Europe have seen a significant increase in micromobility infrastructure, including cycling infrastructure, with 42 European Metropolitan cities implementing 1421.54 km of cycling infrastructure in a year. However, the design principles for bikeways primarily rely on conventional road design for bicycles and lack consistency in accommodating emerging powered micromobility devices like e-scooters. To address this research gap, this paper conducts a systematic review and scientometric analysis to explore safe bikeway infrastructure design. It identifies three overlooked topics (marking and signing, grading, and mode choice) and nine understudied areas (vibration, distress, skidding, alignment features, clearance, lateral control, connectivity, traffic composition, and intersection presence) that significantly impact micromobility safety. The study¿s comprehensive understanding and use of scientometric tools reveal patterns and relationships within the literature. It also highlights criteria influencing micromobility safety and the need for research on pavement and user behavior. The findings contribute to evidence-based decision-making for practitioners and researchers, emphasizing the importance of tailored infrastructure design to enhance micromobility safety and achieve cost-effective improvements., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Factors Influencing the Pedestrian Injury Severity of Micromobility Crashes

  • Almudena Sanjurjo-de-No
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The growth of micromobility transport in cities has created a new mobility paradigm, but this has also resulted in increased traffic conflicts and collisions. This research focuses on understanding the impacts of micromobility vehicles on pedestrian injury severity in urban areas of Spain between 2016 and 2021. The Random Forest classification model was used to identify the most significant factors and their combinations affecting pedestrian injury severity. To address the issue of unbalanced data, the synthetic minority oversampling technique was employed. The findings indicate that pedestrians' age, specifically those 70 years or older, is the most important variable in determining injury severity. Additionally, collisions at junctions or on weekends are associated with worse outcomes for pedestrians. The results highlight the combined influence of multiple factors, including offenses and distractions by micromobility users and pedestrians. These factors are more prevalent among younger micromobility users and those riding for leisure or on weekends. To enhance micromobility road safety and reduce pedestrian injuries, separating micromobility traffic from pedestrian areas is recommended, restricting micromobility vehicle use on sidewalks, providing training and information to micromobility users, conducting road safety campaigns, increasing enforcement measures, and incorporating buffer zones in bike lanes near on-street parking., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033. Likewise, this research has been partially funded by the European Union-Next GenerationEU (RD 289/2021), thanks to the granting of a "Margarita Salas" grant to Almudena Sanjurjo (UP2021-035), researcher at the Universidad Politecnica de Madrid (UPM), to carry out astay at the Universitat Politecnica de Valencia (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comfort Assessment of Micromobility Infrastructure with an Instrumented Vehicle

  • Just-Martínez, Víctor|||0000-0003-3702-7699
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Micromobility studies sustainable urban mobility. In this area, bicycles have been the most popular vehicle for several years. However, the recent growth of users of alternative mobility vehicles, such as stand-up electric scooters (e-scooters), has raised several questions on how they interact with the infrastructure and other users, as well as whether the existing infrastructure is suitable for these vehicles. One of the variables to be analyzed is riding comfort, which can be measured through the vibrations transmitted to users by the pavement. Thus, this paper presents a methodology to assess the comfort of the micromobility infrastructure based on the vertical accelerations registered by an instrumented e-scooter. This methodology has been applied in ten sections of the cycling infrastructure network of Valencia (Spain). The analysis showed that asphalt presented less vibrations than any other material, followed by concrete and square tiling alike, and finishing with transversely oriented cobblestones. This translates directly to comfort, with asphaltic pavements being more comfortable than any other. The analysis also showed that higher speeds mean higher vibrations. This proves to be a useful tool for infrastructure management, where the administrator can place more uncomfortable pavements to lower the riding speed in desired areas (e.g., schools)., This study is part of the research project PID2019-111744RB-I00, funded by MICIU/AEI/10.13039/501100011033, the research project PID2022-1411350B-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER/UE and the grant FPU21/03675 funded by MICIU/AEI/10.13039/501100011033 and by the FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing micromobility patterns: A gender perspective on behavior and risk perception

  • Almudena Sanjurjo-de-No
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
  • Hortelano, Carlos
[EN] The use of micromobility vehicles, particularly e-scooters and bicycles, has seen significant growth in recent years, yet gender differences in usage patterns, behavior, and risk perception remain underexplored. This study aims to address this gap by analyzing gender-based differences in micromobility usage across various cycling infrastructures in Valencia, Spain. Several factors, such as speed, lateral positioning, and risk perception among male and female users of personal bicycles, public bike-sharing systems, and e-scooters, have been examined. Data was collected through video recordings across six different bike lanes. The results reveal that men tend to ride faster than women, particularly when using personal bicycles, though the differences in speed are minimal, especially for e-scooter users. Additionally, women exhibit a greater preference for riding farther from motorized traffic, especially in areas with higher traffic volume and speed. These findings highlight the importance of considering gender-specific needs in the design of micromobility infrastructure to improve safety and encourage broader usage, particularly among women. This study provides empirical evidence of gendered behaviors in micromobility use and offers practical recommendations for urban planners and policymakers., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/https://doi.org/10.13039/ 501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Micromobility Users&apos, Behaviour and Perceived Risk During Meeting Manoeuvres

  • Fonseca-Cabrera, Alejandra Sofia|||0000-0001-7380-1253
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Mobility patterns and lifestyles have changed in recent years in cities worldwide, thanks to the strong rise in modes of travel commonly referred to as micromobility. In this context, e-scooters have experienced a great rise globally which has led to an increase of crashes involving this type of micromobility vehicle in urban areas. Thus, there is a need to study e-scooter users¿ behaviour and their interaction with cyclists. This research aimed at characterizing the meeting manoeuvre between micromobility users along diverse typologies of two-way bicycle track by using an in-strumented e-scooter. As a result, bicycle tracks having concrete or vegetated curb presented lower clearance distance (¿0.8 m) than those without edge elements (>1 m), with no statistically signif-icant differences found between the interaction with bicycles and e-scooters. Additionally, an online questionnaire was proposed to assess users¿ perceived risk during the meeting manoeuvre, concluding that micromobility users feel safer and more comfortable riding on pavements away from parked or moving motorized traffic, and on protected bicycle tracks., FundingThis research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Implementation of a Low-Cost Data Acquisition System on an E-Scooter for Micromobility Research

  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Just-Martínez, Víctor|||0000-0003-3702-7699
  • Fonseca-Cabrera, Alejandra Sofia|||0000-0001-7380-1253
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
[EN] In recent years, cities are experiencing changes in the ways of moving around, increasing the use of micromobility vehicles. Bicycles are the most widespread transport mode and, therefore, cyclists¿ behaviour, safety, and comfort have been widely studied. However, the use of other personal mobility vehicles is increasing, especially e-scooters, and related studies are scarce. This paper proposes a low-cost open-source data acquisition system to be installed on an e-scooter. This system is based on Raspberry Pi and allows collecting speed, acceleration, and position of the e-scooter, the lateral clearance during meeting and overtaking manoeuvres, and the vibrations experienced by the micromobility users when riding on a bike lane. The system has been evaluated and tested on a bike lane segment to ensure the accuracy and reliability of the collected data. As a result, the use of the proposed system allows highway engineers and urban mobility planners to analyse the behaviour, safety, and comfort of the users of e-scooters. Additionally, the system can be easily adapted to another micromobility vehicle and used to assess pavement condition and micromobility users¿ riding comfort on a cycling network when the budget is limited., This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2019-111744RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Typology of bike lane users motion on horizontal curves: a surrogate safety approach

  • Hossein-Sabbaghian, Morteza|||0000-0002-2810-3293
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[EN] This study examines the safety implications of horizontal curves in bike lanes, focusing on cyclists' and e-scooter riders' behavior. As cities transition from auto-centric to sustainable transportation systems, bike lanes are increasingly integrated into urban infrastructure, particularly in Europe. Despite the benefits of active transportation, safety concerns for bike lane users persist. Horizontal curves can pose significant safety risks due to lower radii, higher curvature degrees, and reduced surface friction. This study has shown that cyclists and e-scooter riders are siginificantly affected by sudden changes in geometry, reacting by aggressive maneuvers and increased risks of conflict and fall. To address this, a motion analysis methodology is proposed to identify risky maneuvers in bike lanes, using microscopic analysis of trajectory and speed, revealing naturalistic reactions of bike lane users to various curve geometries. The study employs previous track typology and density-based spatial clustering algorithm to cluster distinct trajectory patterns. Additionally, a decision tree regression model finds the degree of curvature as the most effective variables in user motion behavior. Findings indicate that horizontal curve geometry significantly influencing user behavior. Generally, left-turn maneuvers on curve show greater diversity and higher risks, especially in sharp curves on a bi-directional bike lane. Speed analysis reveals that reducing curve radii increses speeding behaviors and variance. The method proposed is scalable and can help in the development of mitigation strategies such as geometric treatments, surface skid resistance improvements, enhanced signage, and enforcement in high-risk curves identify after using this approach., This research is part of the esMICROMOBILITY research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis and prediction of injury severity in single micromobility crashes with Random Forest

  • Almudena Sanjurjo-de-No
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[EN] Urban micromobility represents a significant shift towards sustainable cities, underscoring the paramount importance of its safety. With the surge in micromobility adoption, collisions involving micromobility devices, such as bicycles and e-scooters, have surged in recent years. The second most common crash type involving these vehicles is one that only involves a micromobility vehicle (single micromobility crashes). This study analyzed 6030 single micromobility crashes that occurred in Spanish urban areas from 2016 to 2020. The Random Forest method-ology was applied to create a classification model for the purpose of characterizing these crashes, predicting their injury severity, and identifying the primary influencing factors. To address the issue of imbalanced data, resulting from the relatively smaller dataset of fatal and seriously injured crashes compared to slightly injured ones, the Synthetic Minority Oversampling Technique (SMOTE) was applied. The results indicate that certain behaviors, such as not wearing a helmet, riding for leisure, and instances of speeding violations, have the potential to increase injury severity. Additionally, crashes occurring at intersections or at cycle lanes with bad pavement conditions are likely to result in more severe outcomes. Furthermore, the concurrent presence of various other factors also contributes to an escalation in crash injury severity. These findings have the potential to provide valuable insights to authorities, assisting them in the decision-making process to enhance micromobility safety and thereby promoting the creation of more equitable and sustainable urban environments., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033. Likewise, this research has been partially funded by the European Union-NextGenerationEU (RD 289/2021) through the "Margarita Salas" grant awarded to Almudena Sanjurjo (UP2021-035) , a researcher at the Univeridad Polite cnica de Madrid (UPM) to support her stay at the Universitat Polite cnica de Valencia (UPV) . Finally, the authors would like to also thank to the Direcci on General de Trafico (DGT) for providing the databases.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the consequences of a car to micromobility user side impact crashes

  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • García García, Alfredo|||0000-0003-1345-3685
  • Almudena Sanjurjo-de-No
  • Nespereira, Martín
[EN] Introduction: The strong rise in modes of travel commonly referred to as micromobility has changed the mobility patterns and lifestyles in cities worldwide, especially after the COVID-19 pandemic. It has led to a significant increase in the number of crashes involving these types of vehicles, especially bicycles and stand-up e-scooters. The risk of crashes is higher at intersections where motor-vehicles perform a turning maneuver crossing a bike lane. Method: The consequences of a passenger car-to-micromobility vehicle side-impact crashes, considering both bicycle and e-scooter, were studied based on the results of the simulation of several scenarios with PC-Crash software. Two injury criteria were applied: Head Injury Criterion (HIC15) and 3 ms chest acceleration criterion. Results: When motor-vehicle speed is lower than 50 km/h, the 3 ms chest acceleration never exceeds the 60 g threshold. However, at 50 km/h, it is close to 50 g in the case of e-scooter rides. At this speed, HIC15 is considerably greater than 1000, both for bicycles and for e-scooters, and the safety margin of 700 is exceeded at 45 km/h for e-scooters. Conclusions: In case of motor vehicle-to-micromobility vehicle side-impact crash, riding a bicycle is safer than riding an e-scooter since the observed HIC15 experienced by the cyclists is lower than that experienced by the e-scooter rider when motor vehicle speed is greater than 30 km/h. Practical applications: To reduce micromobility users injury risk at intersections, motor vehicle speed limit should be equal or lower than 40 km/h. At this impact speed, the activation of hood or bumper airbags could be justified., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.Likewise, this research has been partially funded by the European Union-NextGenerationEU (RD 289/2021) thanks to the granting of a "Margarita Salas" grant to Almudena Sanjurjo, researcher at the Universidad Politecnica de Madrid (UPM) , to carry out a stay at the Universitat Politecnica de Valencia (UPV) .Finally, funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing Micromobility Safety on Horizontal Curves of Bike Lanes: A Video Motion Analysis Methodology

  • Hossein-Sabbaghian, Morteza|||0000-0002-2810-3293
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[EN] This study introduces a novel surrogate safety indicator, the `effective radius¿, and a dynamic tracking methodology for assessing the safety of micromobility (MM) users on isolated bike lane curves, with a focus on geometric characteristics. The methodology involves six main pillars, including site selection, geometric data collection, video recording, speed and position extraction, visualization, and analysis. Naturalistic video data of bike lane users are captured to observe user behavior, and specific points along the curve centerline are identified for monitoring lateral position and speed on a selected curve site in Valencia, Spain. The analysis centers on a bidirectional bike lane featuring a sharp horizontal curve, incorporating the effective radius criteria to evaluate MM users¿ responses to geometry and environmental conditions. Findings reveal significant variation in effective radius, especially during left turns, primarily due to the geometry factor and the lane¿s positioning outside the curve. Lateral displacement heat maps indicate that left-turn users often have higher tendencies to violate dedicated lanes, posing collision risks. The speed analysis underscores potential conflicts and reduced handling capabilities for users breaching lane boundaries. The imperative need for wellinformed design and safety measures in micromobility infrastructure is emphasized, considering the impact of geometric factors on user behavior and safety., This study has received funding from the Ministry of Science and Innovation in Spain under the number MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Skid Resistance Analysis of Urban Bike Lane Pavements for Safe Micromobility

  • López-Molina, Martin
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The use of micromobility vehicles is considerably growing in cities worldwide. As a result, crashes involving these vehicles are also increasing, with single-bicycle crashes accounting for a significant percentage. In most infrastructure-related crashes, the road surface was slippery. In this context, the study of pavement skid resistance is crucial to improve micromobility safety. In this research, the British pendulum tester was used to test the skid resistance of 5 different types of pavements on 17 bike lane locations in Valencia (Spain). Additionally, micromobility users¿ speed was collected to analyse users¿ behaviour. The results showed that asphalt, concrete, and rough painted tile pavements had the greatest skid resistance, whereas painted cobble and smooth painted tile pavements presented poor skid resistance. These values were compared with the limits set by the few guidelines that includes skid resistance thresholds. Moreover, skid resistance variability was also studied, with asphalt pavement being the most homogeneous. Based on the results of the research, several recommendations are proposed for the pavement to be used in the micromobility facility according to its typology. To this end, the investigatory level of skid resistance and the minimum braking distance required were also defined for each type of pavement and bike lane. The findings of this study contribute to the consideration of micromobility safety from the construction stage to the pavement management., This research is part of the research project PID2019-111744RB-I00, funded by MCIN/AEI/10.13039/501100011033.