Skip to main content

NANOCATALISIS COMPUTACIONAL: MODELOS Y APLICACIONES CON OXIDO METALICOS Y PEPTIDOS AUTO-ENSAMBLADOS

PID2020-112715GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of Lewis Acids on the Catalyst Activity for Alkene Metathesis, Z-/E- Selectivity and Stability of Tungsten Oxo Alkylidenes

  • Merino, J. Haydée
  • Bernad, Jesús
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
Lewis acids increase the catalytic activity of classical heterogeneous catalysts and molecular d tungsten oxo alkylidenes in a variety of olefin metathesis processes. The formation of labile adducts between the metal complex and the Lewis acid has been observed experimentally and suggested to be involved in the catalyst activity increase. In this contribution, DFT (M06) calculations have been performed to determine the role of Lewis acids on catalyst activity, Z-/E- selectivity and stability by comparing three W(E)(CHR)(2,5-dimethylpyrrolide)(O-2,6-dimesithylphenoxide) (E = oxo, imido or oxo-Lewis acid adduct) alkylidenes. Results show that the formation of the alkylidene-Lewis acid adducts influences the reactivity of tungsten oxo alkylidenes due to both steric and electronic effects. The addition of the Lewis acid on the E group increases its bulkiness and this decreases catalyst Z-selectivity. Moreover, the interaction between the oxo ligand and the Lewis acid decreases the donating ability of the former toward the metal. This is important when the oxo group has either a ligand in trans or in the same plane that is competing for the same metal d orbitals. Therefore, the weakening of oxo donating ability facilitates the cycloaddition and cycloreversion steps and it stabilizes the productive trigonal bipyramid metallacyclobutane isomer. The two factors increase the catalytic activity of the complex. The electron donating tuneability by the coordination of the Lewis acid also applies to catalyst deactivation and particularly the key β-hydride elimination step. In this process, the transition states show a ligand in pseudo trans to the oxo. Therefore, the presence of the Lewis acid decreases the Gibbs energy barrier significantly. Overall, the optimization of the E group donating ability in each step of the reaction makes tungsten oxo alkylidenes more reactive and this applies both for the catalytic activity and catalyst deactivation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlling the formation of two concomitant polymorphs in Hg(II) coordination polymers

  • Sánchez Férez, Francisco|||0000-0002-9546-6828
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Calvet, Teresa|||0000-0002-4058-7171
  • Font-Bardia, Mercè|||0000-0002-7892-8744
  • Pons Picart, Josefina|||0000-0003-1834-9326
Controlling the formation of the desired product in the appropriate crystalline form is the fundamental breakthrough of crystal engineering. On that basis, the preferential formation between polymorphic forms, which are referred to as different assemblies achieved by changing the disposition or arrangement of the forming units within the crystalline structure, is one of the most challenging topics still to be understood. Herein, we have observed the formation of two concomitant polymorphs with general formula {[Hg(Pip)2(4,4'-bipy)]·DMF}n (P1A, P1B; Pip = piperonylic acid; 4,4'-bipy = 4,4'-bipyridine). Besides, [Hg(Pip)2(4,4'-bipy)]n (2) has been achieved during the attempts to isolate these polymorphs. The selective synthesis of P1A and P1B has been successfully achieved by changing the synthetic conditions. The formation of each polymorphic form has been ensured by unit cell measurements and decomposition temperature. The elucidation of their crystal structure revealed P1A and P1B as polymorphs, which originates from the Hg(II) cores and intermolecular associations, especially pinpointed by Hg···π and π···π interactions. Density functional theory (DFT) calculations suggest that P1B, which shows Hg(II) geometries that are further from ideality, is more stable than P1A by 13 kJ·mol-1 per [Hg(Pip)2(4,4'-bipy)]·DMF formula unit, and this larger stability of P1B arises mainly from metal···π and π···π interactions between chains. As a result, these structural modifications lead to significant variations of their solid-state photoluminescence.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electroinduced crosslinking of triphenylamine-based polybenzoxazines

  • Gascó, Carolina|||0000-0003-4435-8306
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Guirado, Gonzalo|||0000-0003-2128-7007
Polybenzoxazines attract much attention as good phenolic resins due to their interesting and useful properties. Recently, benzoxazine monomers have been employed as crosslinking agents to enhance the properties of different types of polymers by being used as additives to a secondary cure process. In this paper, we propose a new electroinduced approach to increase the crosslinking density of electroactive polybenzoxazines through the design of new monomers that contain triphenylamine groups as electrodimerization points. The use of electrochemical techniques means the crosslinking process can be monitored and also the electrochemical reaction process upon polybenzoxazine oxidation either in solution or ionogel matrixes can be disclosed. These studies lay the foundations for the design of smart polybenzoxazines that could undergo dual-cure mechanisms at low electrochemical potential values.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metal coordination determines the catalytic activity of IrO2 nanoparticles for the oxygen evolution reaction

  • González, Danilo|||0000-0002-2316-2016
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
H2 production through water electrolysis is a promising strategy for storing sunlight energy. For the oxygen evolution reaction, iridium oxide containing materials are state-of-the-art due to their stability in acidic conditions. Moreover, precious metal content can be reduced by using small nanoparticles that show high catalytic activities. We performed DFT calculations on a 1.2 nm large IrO2 Wulff-like stoichiometric nanoparticle model (IrO2) with the aim of determining the factors controlling the catalytic activity of IrO2 nanoparticles. Results show that at reaction conditions tetra- and tricoordinated iridium centers are not fully oxidized, the major species being IrO(OH) and IrO(OH)2, respectively. Although the computed overpotential show that all centers present relatively similar reactivities, low coordinated iridium centers tend to be more active than the pentacoordinates sites of the well-defined facets. These low coordination sites are likely more abundant on amorphous nanoparticles, which could be one of the factors explaining the higher catalytic activity observed for non-crystalline materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing magneto-ionic effects in cobalt oxide films by electrolyte engineering

  • Martins, Sofia|||0000-0002-1801-1651
  • Ma, Zheng|||0000-0003-3655-1448
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Menéndez, Enric|||0000-0003-3809-2863
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Electric-field-driven ion motion to tailor magnetic properties of materials (magneto-ionics) offers much promise in the pursuit of voltage-controlled magnetism for highly energy-efficient spintronic devices. Electrolyte gating is a relevant means to create intense electric fields at the interface between magneto-ionic materials and electrolytes through the so-called electric double layer (EDL). Here, improved magneto-ionic performance is achieved in electrolyte-gated cobalt oxide thin films with the addition of inorganic salts (potassium iodide, potassium chloride, and calcium tetrafluoroborate) to anhydrous propylene carbonate (PC) electrolyte. Ab initio molecular dynamics simulations of the EDL structure show that K+ is preferentially located on the cobalt oxide surface and KI (when compared to KCl) favors the accumulation of positive charge close to the surface. It is demonstrated that room temperature magneto-ionics in cobalt oxide thin films is dramatically enhanced in KI-containing PC electrolyte at an optimum concentration, leading to 11-fold increase of generated magnetization and 35-fold increase of magneto-ionic rate compared to bare PC.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Computational assessment of the impact of Cu(II) and Al(III) on β-amyloid fibrils, Binding sites, structural stability, and possible physiological implications

  • Roldán-Martín, Lorena|||0000-0002-6902-8285
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Maréchal, Jean-Didier|||0000-0002-8344-9043
One of Alzheimer's disease major hallmarks is the aggregation of β-amyloid peptide, a process in which metal ions play an important role. In the present work, an integrative computational study has been performed to identify the metal-binding regions and determine the conformational impact of Cu(II) and Al(III) ion binding to the β-amyloid (Aβ) fibrillary structure. Through classical and Gaussian accelerated molecular dynamics, it has been observed that the metal-free fiber shows a hinge fan-like motion of the S-shaped structure, maintaining the general conformation. Upon metal coordination, distinctive patterns are observed depending on the metal. Cu(II) binds to the flexible N-terminal region and induces structural changes that could ultimately disrupt the fibrillary structure. In contrast, Al(III) binding takes place with the residues Glu22 and Asp23, and its binding reinforces the core stability of the system. These results give clues on the molecular impact of the interaction of metal ions with the aggregates and sustain their non-innocent roles in the evolution of the illness.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Surface morphology controls water dissociation on hydrated IrO2 nanoparticles

  • González, Danilo|||0000-0002-2316-2016
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
Iridium oxide is a highly efficient catalyst for the oxygen evolution reaction, whose large-scale application requires decreasing the metal content. This is achieved using small nanoparticles. The knowledge of the water-IrO2 nanoparticle interface is of high importance to understand the IrO2 behavior as electrocatalyst in aqueous solutions. In this contribution, DFT (PBE-D2) calculations and AIMD simulations on IrO2 nanoparticle models of different sizes ((IrO2)33 and (IrO2)115) are performed. Results show that two key factors determine the H2O adsorption energy and the preferred adsorption structure (molecular or dissociated water): metal coordination and hydrogen bonding with oxygen bridge atoms of the IrO2 surface. Regarding metal coordination, and since the tetragonal distortion existing in IrO2 is retained on the nanoparticle models, the adsorption at iridium axial vacant sites implies stronger Ir-H2O interactions, which favors water dissociation. In contrast, Ir-H2O interaction at equatorial vacant sites is weaker and thus the relative stability of molecular and dissociated forms becomes similar. Hydrogen bonding increases adsorption energy and favors water dissociation. Thus, tip and corner sites of the nanoparticle, with no oxygen bridge atoms nearby, exhibit the smallest adsorption energies and a preference for the molecular form. Overall, the presence of rather isolated tip and corner sites in the nanoparticle leads to lower adsorption energies and a smaller degree of water dissociation when compared with extended surfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis and Activity of Vanadium Oxo NHC Alkylidenes. Remarkable Preference for Degenerate Metathesis and Application for Carbon Isotope Exchange

  • Belov, Dmitry S.
  • Acosta, Carlos M.
  • Garcia-Molina, Miquel
  • Rue, Kelly L.
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Bukhryakov, Konstantin V.|||0000-0002-8425-9671
V imido NHC phosphine alkylidenes are the most efficient V catalysts for ring-closing olefin metathesis of various terminal dienes. The presence of imido and phosphine ligands is responsible for catalyst decomposition. Therefore, the development of phosphine-free V oxo NHC alkylidenes is a logical next step to further improve V-based olefin metathesis. Herein we report V oxo NHC chloride and alkoxide alkylidenes and their reactivity in olefin metathesis. V oxo NHC chloride is readily involved in cycloaddition/cycloreversion steps with olefins. However, a remarkable preference for the formation of a 1,3-metallacyclobutane (MCB) leads to exclusive methylene group exchange (degenerate metathesis) utilized for carbon isotope exchange. DFT studies further support the preference for the 1,3-MCB formation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Vanadium Imido NHC Complexes for Ring-Closing Olefin Metathesis Reactions

  • Tejeda, Gabriela
  • Belov, Dmitry S.
  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Rue, Kelly L.
  • Tsay, Charlene
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Bukhryakov, Konstantin V.|||0000-0002-8425-9671
Vanadium bis-phosphine imido and oxo chloride alkylidenes have been extensively applied in the ring-closing metathesis of various acyclic olefins. However, their reactions involving ethylene have shown limited productivity due to rapid decomposition. The primary degradation pathway involving V bis-phosphine imido complexes is β-H elimination at an unsubstituted metallacyclobutane. In contrast, β-H elimination is disfavored for V oxo species, but bimolecular decomposition precludes its high productivity. Herein, we present the synthesis of V imido NHC complexes that are the most productive V catalysts toward various terminal olefins in ring-closing metathesis reactions. Experimental and computational studies suggest that β-H elimination and bimolecular decomposition are disfavored for V imido NHC complexes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of Vanadium Oxo Alkylidene Complex and Its Reactivity in Ring-Closing Olefin Metathesis Reactions

  • Belov, Dmitry S.
  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Chakraborty, Indranil|||0000-0003-2842-211X
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Bukhryakov, Konstantin V.|||0000-0002-8425-9671
V imido alkylidenes have been applied for the ring-opening metathesis polymerization involving cyclic olefins. However, those complexes found limited application in reactions with acyclic terminal olefins due to instability toward ethylene. Experimental and theoretical studies show that the β-hydride elimination from unsubstituted metallacyclobutene is the primary decomposition pathway in those systems. Herein, we report the synthesis of the first catalytically active V oxo alkylidene, VO(CHSiMe3)(PEt3)2Cl, which exhibits the highest reported productivity with various terminal olefins in ring-closing metathesis reactions among known V catalysts. Presented DFT studies indicate that β-hydride elimination is significantly disfavored for V oxo species.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of Capping Ligands, Solvent, and Thermal Effects on CdSe Quantum Dot Optical Properties by DFT Calculations

  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
Cadmium selenide nanomaterials are very important materials in photonics, catalysis, and biomedical applications due to their optical properties that can be tuned through size, shape, and surface passivation. In this report, static and ab initio molecular dynamics density functional theory (DFT) simulations are used to characterize the effect of ligand adsorption on the electronic properties of the (110) surface of zinc blende and wurtzite CdSe and a (CdSe) nanoparticle. Adsorption energies depend on ligand surface coverage and result from a balance between chemical affinity and ligand-surface and ligand-ligand dispersive interactions. In addition, while little structural reorganization occurs upon slab formation, Cd···Cd distances become shorter and the Se-Cd-Se angles become smaller in the bare nanoparticle model. This originates mid-gap states that strongly influence the absorption optical spectra of nonpassivated (CdSe). Ligand passivation on both zinc blende and wurtzite surfaces does not induce a surface reorganization, and thus, the band gap remains nonaffected with respect to bare surfaces. In contrast, structural reconstruction is more apparent for the nanoparticle, which significantly increases its highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap upon passivation. Solvent effects decrease the band gap difference between the passivated and nonpassivated nanoparticles, the maximum of the absorption spectra being blue-shifted around 20 nm by the effect of the ligands. Overall, calculations show that flexible surface cadmium sites are responsible for the appearance of mid-gap states that are partially localized on the most reconstructed regions of the nanoparticle that can be controlled through appropriate ligand adsorption.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Amyloid Fibrils Formed by Short Prion-Inspired Peptides Are Metalloenzymes

  • Navarro, Susanna|||0000-0001-8160-9536
  • Díaz-Caballero, Marta|||0000-0001-9032-9819
  • Peccati, Francesca|||0000-0002-7813-8216
  • Roldán-Martín, Lorena|||0000-0002-6902-8285
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Ventura, Salvador|||0000-0002-9652-6351
Enzymes typically fold into defined 3D protein structures exhibiting a high catalytic efficiency and selectivity. It has been proposed that the earliest enzymes may have arisen from the self-assembly of short peptides into supramolecular amyloid-like structures. Several artificial amyloids have been shown to display catalytic activity while offering advantages over natural enzymes in terms of modularity, flexibility, stability, and reusability. Hydrolases, especially esterases, are the most common artificial amyloid-like nanozymes with some reported to act as carbonic anhydrases (CA). Their hydrolytic activity is often dependent on the binding of metallic cofactors through a coordination triad composed of His residues in the β-strands, which mimic the arrangement found in natural metalloenzymes. Tyr residues contribute to the coordination of metal ions in the active center of metalloproteins; however, their use has been mostly neglected in the design of metal-containing amyloid-based nanozymes. We recently reported that four different polar prion-inspired heptapeptides spontaneously self-assembled into amyloid fibrils. Their sequences lack His but contain three alternate Tyr residues exposed to solvent. We combine experiments and simulations to demonstrate that the amyloid fibrils formed by these peptides can efficiently coordinate and retain different divalent metal cations, functioning as both metal scavengers and nanozymes. The metallized fibrils exhibit esterase and CA activities without the need for a histidine triad. These findings highlight the functional versatility of prion-inspired peptide assemblies and provide a new sequential context for the creation of artificial metalloenzymes. Furthermore, our data support amyloid-like structures acting as ancestral catalysts at the origin of life.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ru-based nanoparticles supported on carbon nanotubes for electrocatalytic hydrogen evolution, structural and electronic effects

  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Gil Jiménez, Laia|||0000-0003-0870-4064
  • Campos, Sergi
  • Creus, Jordi|||0000-0001-5555-8122
  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Collière, Vincent
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Giménez, Sixto|||0000-0002-4522-3174
  • Francàs, Laia|||0000-0001-9171-6247
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
The performance of Ru-based nanoparticles (NPs) in the hydrogen evolution reaction (HER) relies on both their structural properties and the oxidation state of the metal. Herein, the versatility of the organometallic approach for the synthesis of metal-based nanostructures is combined with thermal oxidation treatments to prepare carbon-nanotube (CNT)-supported Ru-containing nanomaterials for their use as electrocatalysts after dropcasting onto a glassy carbon rotating disk electrode. This strategy allowed access to a series of hybrid nanomaterials of different Ru/RuO2 compositions and different structural order. Linear sweep voltammetry experiments show that the relative disposition of the Ru/RuO2 phases, their interconversion under reductive turnover conditions and the degree of structural order affect the HER electrocatalytic performance of different materials. The electrode containing NPs consisting of a RuO2 core and metallic Ru at the surface outperforms that containing either pure RuO2 NPs or Ru NPs. Impedance spectroscopy studies and DFT calculations suggest that this catalytic activity enhancement arises from improved charge transport properties and from the structure of the exposed metallic Ru shell, which is partially oxidized and highly amorphous.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Computational Study of Amyloidβ Familial Mutations and Metal Interaction, Impact on Monomers and Aggregates Dynamical Behaviors

  • Roldán-Martín, Lorena|||0000-0002-6902-8285
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Maréchal, Jean-Didier|||0000-0002-8344-9043
One of the main hallmarks of Alzheimer's Disease is the formation of β-amyloid plaques, whose formation may be enhanced by metal binding or the appearance of familial mutations. In the present study, the simultaneous effect of familial mutations (E22Q, E22G, E22K, and D23N) and binding to metal ions (Cu(II) or Al(III)) is studied at the Aβ monomeric and fibrillar levels. With the application of GaMD and MD simulations, it is observed that the effects of metal binding and mutations differ in the monomeric and fibrillar forms. In the monomeric structures, without metal binding, all mutations reduce the amount of α-helix and increase, in some cases, the β-sheet content. In the presence of Cu(II) and Al(III) metal ions, the peptide becomes less flexible, and the β-sheet content decreases in favor of forming α-helix motifs that stabilize the system through interhelical contacts. Regarding the fibrillar structures, mutations decrease the opening of the fiber in the vertical axis, thereby stabilizing the S-shaped structure of the fiber. This effect is, in general, enhanced upon metal binding. These results may explain the different Aβ aggregation patterns observed in familial mutations. The amyloid-β aggregation process is still widely unknown and difficult to experimentally determine. This work uses a multiscale computational protocol to study possible interfering factors on the aggregation process. The focus is placed on the effect of Cu and Al metal ions, together with four well-known familial mutations (E22Q, E22G, E22K, and D23N), on the monomeric and fibrillar species.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Structure directing factors and photophysical properties of five Cu(I)-iodide materials with N-donor heteroaromatic ligands

  • Sánchez Férez, Francisco|||0000-0002-9546-6828
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Calvet, Teresa|||0000-0002-4058-7171
  • Font-Bardia, Mercè|||0000-0002-7892-8744
  • Pons Picart, Josefina|||0000-0003-1834-9326
In this work, two families of Cu(I)-iodide complexes with N-heterocyclic donors ligands bearing amide, phenyl, chloro, and methyl substituents have been synthesized to combine two structural directing factors: attractive interactions and steric bulkiness. To this aim, we synthesized five Cu(I)-iodide based complexes: two 1D coordination polymers [CuI(isn)] (1) and {[CuI(nic)]·ACN} (2), one tetrameric cubane [CuI(3-phpy)] (3), one rhomboid dimer [CuI(8-ClQuin)] (4) and one monomer [CuI(1-CHisoQuin)] (5). Interestingly, easy ligand dissociation and marked distortions within the molecular structure enabled structural rearrangements between the mentioned arrays. Then, we compiled the structures contained in this family of materials and provided a shape map and a conversion pathway between the most similar arrays, the cubane and the staircase polymer. Finally, the photophysical properties of 1-5 were investigated and electronic transitions were identified and supported by DFT and TD-DFT calculations since their photophysical properties are strongly dependent on the molecular arrangement and electronic distribution.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Different role of ruthenium and platinum defective sites on the catalytic activity for the hydrogen evolution reaction

  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
The reduction of protons to H (the hydrogen evolution reaction, or HER) is one of the two half reaction of water electrolysis. It produces H that can be used as an energy vector or sustainable feedstock for other compounds. Platinum electrodes are the "golden standard" catalysts. However, due to Pt cost, there is a need for cheaper alternatives. Indeed, highly active ruthenium nanoparticles are a promising alternative. In this contribution, we use DFT (PBE-D2) calculations to understand the differences in the catalytic activities of Ru and Pt materials by considering slab models containing crystalline close packed planes, terraces, steps, islands and adatoms. Results reveal that the strong adsorption of isolated H atoms on either material and on various sites prevents the hydrogen evolution reaction from taking place. Regardless of the model considered, the formation of a monolayer is also too favorable, thus suggesting that higher coverages are needed before HER onset. The adsorption energies of H atoms exceeding the monolayer on platinum's crystalline surfaces, defective steps and terraces are very close to the ideal value, consistent with platinum's high catalytic activity. These results outline that the presence of lowly coordinated metal centers has little effect on the reactivity of Pt. The adsorption energy of extra H on Ru surfaces depends on the adsorption site: On non-defective sites, the adsorption of the extra H is unfavorable, leading to inefficient catalysts. In contrast, the adsorption on defective sites is favorable and close to the ideal value, thus suggesting an enhancement of the catalytic activity when Ru coordination decreases. These results outline that the reactivity toward hydrogen of Ru materials is more sensitive to surface morphology than Pt-based ones. Indeed, the presence of low coordinated centers is larger on Ru nanoparticles, thus rationalizing their high HER catalytic activity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploring the Esterase Catalytic Activity of Minimalist Heptapeptide Amyloid Fibers

  • Roldán-Martín, Lorena|||0000-0002-6902-8285
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Maréchal, Jean-Didier|||0000-0002-8344-9043
  • Sodupe, Mariona|||0000-0003-0276-0524
This paper investigates the esterase activity of minimalist amyloid fibers composed of short seven-residue peptides, IHIHIHI (IH7) and IHIHIQI (IH7Q), with a particular focus on the role of the sixth residue position within the peptide sequence. Through computational simulations and analyses, we explore the molecular mechanisms underlying catalysis in these amyloid-based enzymes. Contrary to initial hypotheses, our study reveals that the twist angle of the fiber, and thus the catalytic site's environment, is not notably affected by the sixth residue. Instead, the sixth residue interacts with the p-nitrophenylacetate (pNPA) substrate, particularly through its -NO group, potentially enhancing catalysis. Quantum mechanics/molecular mechanics (QM/MM) simulations of the reaction mechanism suggest that the polarizing effect of glutamine enhances catalytic activity by forming a stabilizing network of hydrogen bonds with pNPA, leading to lower energy barriers and a more exergonic reaction. Our findings provide valuable insights into the intricate interplay between peptide sequence, structural arrangement, and catalytic function in amyloid-based enzymes, offering potentially valuable information for the design and optimization of biomimetic catalysts.