Skip to main content

MICRORREACTORES ROSCADOS DE BAJO COSTE PARA TRATAMIENTO DE AGUAS (MICROSCA)

PID2020-113558RB-C44

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultraviolet light spectroscopic characterization of ibuprofen acid aggregation in deionized water

  • Marbán Calzón, Gregorio
  • Fernández Pérez, Amparo
  • Álvarez-García, Sonia
This work provides a description of the aggregation equilibria of ibuprofen acid in deionized water at temperatures between 20 and 40 °C in the 0.1-20.1 ppm concentration range. For this goal, we have made use of UV-Visible spectroscopy. A calculation algorithm was developed to obtain the aggregate orders and thermodynamic parameters from the experimental absorbance values. Monomeric ibuprofen acid was found to be absent in water solutions. In addition to the dimer, two aggregates formed by 32 and 128 monomeric units were found to co-exist in solution at the highest concentration tested. A critical micelle concentration of 7.8 ppm was estimated for this system. The appearance of the first aggregate occurs when the pH drops below the pKa value, which was determined to be 4.62. At higher ibuprofen concentrations, a sudden jump in the electrical conductivity coincides with the onset of formation of the second aggregate. A varied menu of alternatives is offered with respect to the calibration curve of ibuprofen in water, though the linear calibration of ibuprofen concentration with absorbance might be reasonably performed at 224 nm. Finally, the dissolution rate of the commercial ibuprofen used in this work was found to obey the Noyes-Whitney first order equation., The financial support for this research work was provided by Principado de Asturias (IDI/2021/000096) and MCIN/AEI/10.13039/501100011033 (PID2020-113558RB-C44)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correct Use of the Bhatia and Perlmutter Random Pore Model under Nonisothermal Conditions

  • Marbán Calzón, Gregorio
The classic random pore model (RPM) of Bhatia and Perlmutter [A random pore model for fluid-solid reactions: I. Isothermal, kinetic control. AIChE J.1980, 26, 379-386], which has been used in the kinetic analysis of numerous gas-solid processes involving porous materials under reaction control, was originally derived only for isothermal conditions. This has not prevented many researchers from using it in nonisothermal conditions, a frequent procedure whose validity has not been demonstrated until now. In this work, different questions are answered: Are the isothermal equations of the RPM valid under nonisothermal conditions? And, related to this question, is the commonly used conversion function correct? This work provides the scientific basis that was missing until now for the use of the RPM in nonisothermal conditions, as well as the correct conversion function for such use over the entire particle size range. The said RPM conversion function has been obtained from the exact formulation of the reaction rate equation, and as it should have been originally, it has the grain model function as one of its particular solutions. In this way, the gap that prevented the use of the random pore model for very low particle size values has finally been closed., The financial support for this research work was provided by Principado de Asturias (IDI/2021/000096) and MCIN/AEI/10.13039/501100011033 (PID2020-113558RB-C44)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A low-cost optofluidic threaded microreactor (OTM) for water treatment

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
In this work, an innovative optofluidic threaded microreactor (OTM) has been designed and tested. It consists of a helical microchannel with controllable and very low radius of curvature coated with catalytic nanoparticles that can operate efficiently in continuous flow for the degradation of contaminants in water under a wide set of operating conditions. In its simplest configuration, the flow microreactor consists of an inexpensive, commercially available external threaded rod, which is coated with an active catalyst. The rod is inserted into a transparent tube to form a long helical microchannel. The coating process involves the use of a standard acrylic primer in which anatase TiO2 nanoparticles are dispersed by a new coating method; swivel screw coating impregnation (SSCI). Catalytic nanoparticles show high adhesion to rod surface in ultrasonic tests. The OTM has been tested for the photodegradation of ibuprofen in water under UV radiation. The photocatalytic reaction system has high activity and stability. It has been proven that the primer has no effect on the activity of the catalysts, which remain firmly adhered to the surface of the rod during long reaction periods. Under the operating conditions used in this work, 65% TOC removal was achieved during ibuprofen photodegradation experiments. Compared with chip-type microreactors the OTM shows undoubted benefits in terms of cost, geometric configuration and photocatalytic performance under a wide variety of operating conditions., The financial support for this research work was provided by Principado de Asturias (IDI/2021/000096) and MCIN/AEI/10.13039/501100011033 [PID2020-113558RB-C44 and European Union NextGeneration EU/PRTR (TED2021-129234B-I00)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for A low-cost optofluidic threaded microreactor (OTM) for water treatment

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
The financial support for this research work was provided by Principado de Asturias (IDI/2021/000096) and MCIN/AEI/10.13039/501100011033 [PID2020-113558RB-C44 and European Union NextGeneration EU/PRTR (TED2021-129234B-I00)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of photon fluxes, external mass transfer and heterogeneous quantum yield in an Optofluidic threaded microreactor (OTM)

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
This study presents a comprehensive methodology to evaluate photon fluxes, external mass transfer, and heterogeneous quantum yield within a microchannel-type optofluidic microrreactor. It has been specifically applied to an optofluidic threaded microreactor (OTM), tested in the photodegradation of aqueous ibuprofen acid under UVA irradiation. The given approach facilitates the calculation of heterogeneous quantum yields, avoiding the need for specialized radiometers and relying instead on the spectral characterization of the reactor components. By employing flow-mode ferrioxalate actinometry, the photon flux within the OTM was accurately determined, simultaneously allowing evaluation of the average optical path length. The results highlight the high radiation utilization ratio in the OTM. The optical properties of the catalytic layer, composed of TiO<inf>2</inf> nanoparticles and a primer, were characterized through the Kubelka-Munk theory and the Bouguer-Beer law, which allowed the estimation of the active shell thickness. The reaction rate equation, which included the effect of external mass transfer resistance through a modified Sherwood number correlation, could be analytically integrated to evaluate residence time, thus allowing the estimation of reaction orders and kinetic and equilibrium constants by error minimization. The OTM shows a relative photonic efficiency of 1.6 for the photodegradation of ibuprofen. This work provides a robust method for evaluating photocatalytic performance in microchannel-type reactors, offering insights into the effect of geometric and operational parameters on photon absorption, mass transfer, and quantum yield., The financial support for this research work was provided by PCTI Asturias/FEDER (IDE/2024/000792) and MCIN/AEI/10.13039/501100011033 [PID2020-113558RB-C44 and European Union NextGeneration EU/PRTR (TED2021-129234B-I00)]., Peer reviewed