Skip to main content

ACIDO FORMICO COMO VECTOR DE ENERGIA: DE LA BIOMASA AL HIDROGENO VERDE

PID2020-113809RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formic Acid Dehydrogenation over Ru- and Pd-Based Catalysts: Gas- vs. Liquid-Phase Reactions

  • Ruiz-López, Estela
  • Ribota Peláez, María
  • Blasco Ruz, María
  • Domínguez Leal, María Isabel
  • Martínez Tejada, Marcela
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
Formic acid has recently been revealed to be an excellent hydrogen carrier, and interest in the development of efficient and selective catalysts towards its dehydrogenation has grown. This reaction has been widely explored using homogeneous catalysts; however, from a practical and scalable point of view, heterogeneous catalysts are usually preferred in industry. In this work, formic acid dehydrogenation reactions in both liquid- and vapor-phase conditions have been investigated using heterogeneous catalysts based on mono- or bimetallic Pd/Ru. In all of the explored conditions, the catalysts showed good catalytic activity and selectivity towards the dehydrogenation reaction, avoiding the formation of undesired CO., This research was funded by Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/501100011033/) grant number [ENE2017-82451-C3-3-R and PID2020-113809RB-C32] and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades, gran number [P18-RT-3405]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low CO2 hydrogen streams production from formic acid through control of the reaction pH

  • Santos, José Luis
  • Ruiz-López, Estela
  • Ivanova, Svetlana
  • Monzón, Antonio
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
There are multiple factors that influence the catalyst performance in the reaction of formic acid dehydrogenation: the nature of catalyst and/or support, the used solvent and reaction variables such as temperature, time, formic acid concentration, presence/absence of formates and pH of the solution. This work evaluates a series of important parameters like the influence of the pH by itself, the influence of the nature of used alkali agents and the effect of direct formate addition as reactive on hydrogen production via formic acid dehydrogenation over a commercially available catalyst. The catalytic performance appears to depend on the ionic radius of the cations of the used base which reflects consequently on the hydrogen selectivity. The best base to be used must have lower hydrated cationic radii and a starting pH around 4 to achieve important hydrogen selectivity for medium term formic acid conversion., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/501100011033/) and for FEDER Funds, Projects ENE2017-82451-C3-3-R and PID2020-113809RB-C32. Also the financial support from Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant P18-RT-3405) co-financed by FEDER funds from the European Union is welcomed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalized biochars as supports for Ru/C catalysts: tunable and efficient materials for γ-Valerolactone production

  • Bounoukta, Charf Eddine
  • Megías-Sayago, Cristina
  • Navarro de Miguel, Juan Carlos
  • Ammari, Fatima
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Cotton stalks-based biochars were prepared and used to synthetize Ru-supported catalysts for selective production of γ-valerolactone from levulinic acid in aqueous media. Different biochars’ pre-treatments (HNO3, ZnCl2, CO2 or a combination of them) were carried out to activate the final carbonaceous support. Nitric acid treatment resulted in microporous biochars with high surface area, whereas the chemical activation with ZnCl2 substantially increases the mesoporous surface. The combination of both treatments led to a support with exceptional textural properties allowing the preparation of Ru/C catalyst with 1422 m2/g surface area, 1210 m2/g of it being a mesoporous surface. The impact of the biochars’ pre-treatments on the catalytic performance of Ru-based catalysts is fully discussed., Financial support for this work was obtained from Spanish Ministerio de Ciencia e Innovación (MICIN) (Grant PID2020-113809RB-C32) and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant: P18-RT-3405), all co-financed by FEDER funds from the European Union. C. Bounoukta acknowledges Universidad de Sevilla and Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) for his PhD scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New 3D Printing Strategy for Structured Carbon Devices Fabrication

  • Delgado-Martín, Gabriel
  • Rodríguez, Nicolás
  • Domínguez, M. I.
  • Agámez Pertuz, Yazmin Yaneth
  • Martínez Tejada, L.M.
  • Ruiz-López, Estela
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
This work shows a new method for the preparation of 100% carbon-structured devices. The method is based on resorcinol-formaldehyde polymerization, using starch as a binder with the addition of a certain amount of external carbon source before polymerization. Molds obtained by 3D printing are used to shape the structured devices in the desired shape, and the ultimate pyrolysis step consolidates and produces the carbonaceous devices. The proposed method allows obtaining supports with different textural and surface properties varying the carbonaceous source, the solvent, or the pyrolysis conditions, among other factors. The as-obtained devices have demonstrated their usefulness as palladium supports for the gas-phase formic acid dehydrogenation reaction. The monolith shows a high conversion of formic acid (81% according to H2 production) and a high selectivity towards hydrogen production at mild temperatures (80% at 423 K)., This research was funded by the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/) grant number [ENE2017-82451-C3-3-R and PID2020-113809RB-C32] and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades, grant number [P18-RT-3405] co-financed by FEDER funds from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biochar production from cellulose under reductant atmosphere: influence of the total pyrolysis time

  • Santos Muñoz, José Luis
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Today's rising energy costs, coupled with increasing energy demand, make it necessary to search for more efficient energy processes. In recent years, there have been increasing efforts to develop efficient catalysts based on waste-derived char, by a single step where the carbon precursor and the metallic active phase one undergo a single common thermal process under a reductant atmosphere at high temperature. The use of a reductant atmosphere drives the formation of carbonaceous materials with different characteristics than those obtained under the standard nitrogen-inert one. Our work evaluates the influence of the residence time and the heating rate on the physicochemical properties of the biochar obtained. Relatively long residence times and slow heating rates, improve the yield to the resulting biochar, without increasing production cost, making the subsequent char-based metallic catalyst synthesis more efficient. The heating rate was shown to be key in improving the properties of the char in a smoother and more controlled way, unlocking a new working pathway for the efficient design and production of char-based catalysts in a one-pot synthesis., Financial support for this work was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI(10.13039/501100011033)/FEDER Funds una manera de hacer Europa), Project PID2020-113809RB-C32 and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant: P18-RT-3405) all co-financed by FEDER funds from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selective hydrodeoxygenation of levulinic acid to γ-valerolactone over Ru supported on functionalized carbon nanofibers

  • Bounoukta, Charf Eddine
  • Megías-Sayago, C.
  • Rendón, N.
  • Ammari, Fatima
  • Penkova, A.
  • Svetlana, I.
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
In this work, carbon nanofibers (CNFs) have been successfully functionalized by using different approaches and finally used for the preparation of Ru based catalysts. The organometallic approach has been demonstrated to be suitable for CNF functionalization, leading to well-defined Ru NPs (by adding organosilane, amino or mercapto functionalities, among others) in comparison with mineral acid treatments conventionally used to activate and/or functionalize carbonaceous solids. All catalysts have been tested in levulinic acid hydrodeoxygenation to γ-valerolactone under mild conditions, with the impact of CNF functionalization on the catalysts' performance fully discussed in comparison with unmodified commercial CNFs., Financial support for this work was obtained from Spanish Ministerio de Ciencia e Innovación (MICIN) (Grant PID2020-113809RB-C32) and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant: P18-RT-3405) all co-financed by FEDER funds from the European Union. C. Bounoukta acknowledges Universidad de Sevilla and Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) for his PhD scholarship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Glucose dehydration reaction over metal halides supported on activated charcoal catalysts

  • Delgado-Martín, Gabriel
  • Lara, Beatriz
  • Bounoukta, Charf Eddine
  • Domínguez Leal, María Isabel
  • Ammari, Fatima
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
Different metal halide catalysts supported on a commercial active charcoal have been synthesized, activated, characterized and tested in glucose dehydration to 5-hydroxymethylfurfural using a biphasic water/methyl isobutyl ketone media. The influence of the cation nature (K+, Ca2+, Sr2+, Mg2+) and anion nature (F-, Cl-, Br-) on the catalytic performance of the solid is discussed in terms of glucose conversion, HMF yield and products selectivity. The activation of the impregnated catalysts results in a great diversity of active sites, such as Bronsted sites (carboxylic groups), basic sites (metal oxide), and Lewis acid site (Mn+). Their distribution within the samples determinates the resulting products and the final HMF yield., Financial support was obtained from Spanish Ministerio de Ciencia e Innovacion (MCIN/AEI/10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa), Projects ENE2017-82451-C3-3-R and PID2020-113809RB-C32. Also, the financial support from Junta de Andalucia via Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant P18RT-3405) co-financed by FEDER funds from the European Union are welcomed. C. Bounoukta acknowledges Universidad de Sevilla and Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) for his project scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formic Acid Dehydrogenation over a Monometallic Pd and Bimetallic Pd:Co Catalyst Supported on Activated Carbon

  • Ribota Peláez, María
  • Ruiz-López, E.
  • Domínguez Leal, María Isabel
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
In this study, palladium is proposed as an active site for formic acid dehydrogenation reaction. Pd activity was modulated with Co metal with the final aim of finding a synergistic effect that makes possible efficient hydrogen production for a low noble metal content. For the monometallic catalysts, the metal loadings were optimized, and the increase in the reaction temperature and presence of additives were carefully considered. The present study aimed, to a great extent, to enlighten the possible routes for decreasing noble metal loading in view of the better sustainability of hydrogen production from liquid organic carrier molecules, such as formic acid., Financial support was obtained from the Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/) and the FEDER Funds una manera de hacer Europa (Projects ENE2017-82451-C3-3-R and PID2020-113809RB-C32). In addition, the financial support received from Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (grant P18-RT-3405), co-financed by FEDER funds from the European Union, is highly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formic acid as renewable reagent and product in biomass upgrading

  • Achour, Mahdi
  • Álvarez-Hernández, Débora
  • Ruiz-Lopez, Estela
  • Megías-Sayago, Cristina
  • Ammari, Fátima
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
The problems associated with the use of molecular hydrogen (transportation, storage and high cost) have pushed scientists to the pursuit of efficient hydrogen donors, able to reduce chemical bonds in the presence of catalysts through catalytic transfer hydrogenation (CTH) reactions. In this sense, formic acid stands up as one of the most important and safest chemical molecules for H2 generation under mild conditions. It can be obtained from biomass through different catalytic transformations and used as well to upgrade biomass to platform chemicals. This review summarizes the recently published studies dealing with formic acid production from biomass (using glucose as representing molecule) along with its use in hydrogen involved reactions of different groups of platform chemicals upgrading., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa), Project PID2020-113809RB-C32. Also the financial support from Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant P18-RT-3405) co-financed by FEDER funds from the European Union is highly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure effect of modified biochar in Ru/C catalysts for sugar mixture hydrogenation

  • Santos, J. L.
  • Sanz-Moral, L. M.
  • Aho, A.
  • Ivanova, Svetlana
  • Murzin, D. Yu
  • Centeno, Miguel Ángel
This study deals with the production and activation of biochars and their use as supports for a series of ruthenium catalysts for hydrogenation of L-arabinose/D-galactose sugar mixture. The synthesized biochars differ in physicochemical properties and surface chemistry influencing ruthenium metal uptake and dispersion and as a consequence its catalytic behaviour. Selectivity exceeding 95% was observed for both hexitols. The catalytic performance of the prepared Ru supported catalysts is also compared to the already known Ru/activated carbon commercial catalyst., Financial support for this work was obtained from Spanish Ministerio de Ciencia e Innovación (MICCIN) (Grant PID2020-113809RB-C32) and Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant: P18-RT-3405) all co-financed by FEDER funds from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pursuing efficient systems for glucose transformation to levulinic acid: Homogeneous vs. heterogeneous catalysts and the effect of their co-action

  • Bounoukta, Charf Eddine
  • Megías-Sayago, Cristina
  • Ivanova, Svetlana
  • Ammari, Fatima
  • Centeno, Miguel Ángel
  • Odriozola, José Antonio
Exploring available catalytic systems to understand their behavior is a must to properly design efficient catalysts aiming to definitively drive biomass from laboratory to industrial scale. Glucose transformation to levulinic acid involves cascade reactions with specific requirements, different active sites in each case and secondary reactions hard to avoid which are intrinsically linked to the catalyst's nature and reaction conditions. In the present work, homogeneous, heterogeneous and heterogeneous/homogeneous catalysts are considered with the unique goal of improving levulinic acid yield while understanding the catalytic behaviour of cost-effective catalysts. The choice of the catalytic systems and the effect of the main reaction parameters on activity and selectivity is studied and discussed., Financial support for this work was obtained from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant: ENE2017-82451-C3-3-R), Spanish Ministerio de Ciencia e Innovación (MICIN) (Grant PID2020-113809RB-C32) all co-financed by FEDER funds from the European Union and Junta de Andalucía via Consejería de Transformation Economica, Industria, Conocimiento y Universidades and its PAIDI 2020 program with financial support for the project with reference P18-RT-3405. C. Bounoukta also acknowledges Universidad de Sevilla and Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) for his PhD scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Finely Tunable Carbon Nanofiber Catalysts for the Efficient Production of HMF in Biphasic MIBK/H2O Systems

  • Bounoukta, Charf Eddine
  • Megías-Sayago, Cristina
  • Rendón, Nuria
  • Ammari, Fátima
  • Centeno, Miguel Ángel
  • Ivanova, Svetlana
This work proposes catalytic systems for fructose dehydration to 5-hydroxymethylfurfural using a series of functionalized carbon nanofibers. The catalysts were synthesized via finely selected covalent grafting in order to include a variety of functionalities like pure Bronsted acid, tandem Brønsted/Lewis acid, and tandem Lewis acid/Lewis base catalysts. After the characterization and evaluation of acidity strength and the amount of acid centers, the catalyst series was screened and related to the product distribution. The best-performing catalyst was also used to optimize the reaction parameters in order to achieve 5-hydroxymethylfurfural yields rounding at 60% without significant humin formation., We acknowledge the support from the Spanish Ministerio de Ciencia e Innovación, FEDER Funds una manera de hacer Europa. Financial support was obtained from the Spanish Ministerio de Ciencia e Innovación, FEDER Funds una manera de hacer Europa (MCIN/AEI/10.13039/501100011033/) Grants PID2020-113809RB-C32; TED2021-129181B-I00; and PID2022-136570OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical tailoring of graphite properties for tunable catalytic selectivity of glucose conversion to 5-hydroxymethylfurfural

  • Delgado-Martín, Gabriel
  • Bounoukta, Charf Eddine
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
  • Villar Rodil, Silvia María
  • Paredes Nachón, Juan Ignacio
  • Cazaña, Fernando
  • Monzón, Antonio
  • García-Dalí, Sergio
This study presents a novel approach for boosting the selectivity of 5-hydroxymethylfurfural (HMF) production from glucose through electrochemical modification of graphite materials. Three distinct graphitic substrates were subjected to controlled electrochemical treatments utilizing sodium sulfate or phosphoric acid as electrolytes. The process expanded the graphite particles/pieces and introduced oxygenated functional groups to the exposed surfaces while preserving the structural integrity of the bulk material. The resulting modifications influenced the type and quantity of Lewis and Brønsted acidic sites, providing exhaustive control over reaction pathways leading to HMF. This electrochemically modified graphite demonstrated superior tunability compared to traditional metal-based catalysts, enabling dynamic optimization of reaction conditions for enhanced HMF yield. The controlled introduction of functional groups facilitated the tailoring of active sites, significantly impacting the kinetics of glucose conversion and achieving HMF selectivity up to 95%. This level of precision in controlling catalytic properties is essential for maximizing HMF yield while minimizing undesired by-product formation, addressing a critical challenge in HMF production., SGD is also grateful to the Spanish MINECO for his predoctoral contract [BES/2016 077830]. GDM, SI, MAC, AM and FC acknowledge the financial support of MICINN‐FEDER [PID2020-113809RB-C31 and PID2020-113809RB-C32]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Effective Non-Noble MnO2 Catalysts for 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid

  • Álvarez-Hernández, Débora
  • Megías-Sayago, Cristina
  • Penkova, Anna
  • Centeno, Miguel Ángel
  • Ivanova, Svetlana
Chemicals and CAS Registry Numbers 5 hydroxymethylfurfura, Noble metal-free catalyst or catalytic oxidation of 5-hydroxymethylfurfural into 2,5-furandicarboxylic acid are proposed in this study as a proposal to solve one of the great disadvantages of this reaction of using preferably noble metal-based catalysts. The catalytic activity of six MnO2 crystal structures is studied as alternative. The obtained results showed a strong connection between catalytic activity the type of MnO2 structure organization and redox behavior. Among all tested catalysts, ϵ-MnO2 showed the best performance with an excellent yield of 74 % of 2,5-furandicarboxylic acid at full -hydroxymethylfurfural conversion., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa, Project PID2020‐113809RB‐C32, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of vanadium species on the catalytic oxidation of glucose for formic acid production

  • Álvarez-Hernández, Débora
  • Ivanova, Svetlana
  • Penkova, Anna Dimitrova
  • Centeno, Miguel Ángel
VOx/TiO2 catalysts with various theorical monolayer values have been prepared and used to study, for the first time, the effect of vanadium loading in the selective oxidation of glucose to formic acid. Monomeric or isolated vanadia species dominate at low loadings, evolving into polymeric chains at higher concentrations, while crystalline V2O5 is observed at loadings over the theoretical monolayer value. Their characterization by XRD, BET, ICP, DRIFTS, Raman, UV–vis, H2-TPR and NH3-TPD reveal distinct physicochemical characteristics influenced by the formed vanadia species, impacting sample acidity, reducibility, and catalytic activity. All catalysts exhibit significant activity, forming formic acid as the main product in the liquid phase and reaching a peak formic acid yield of 42 %. Post-reaction analysis reveals that the leaching-prone crystalline V2O5 compromises catalyst stability while isolated vanadia species demonstrate superior catalytic activity and leaching resistance. The findings of this study provide a strong basis for the development of a heterogeneous vanadia catalyst with improved interaction with the support., Financial support was obtained from Spanish Ministerio de Ciencia e Innovaci\u00F3n (MCIN/AEI /10.13039/501100011033/) and for FEDER Funds \u201Cuna manera de hacer Europa\u201D, Project PID2020-113809RB-C32., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

V2O5/TiO2 Catalyst for Catalytic Glucose Oxidation to Formic Acid in Batch Reactor: Vanadium Species Nature and Reaction Conditions Optimization

  • Álvarez-Hernández, Débora
  • Ivanova, Svetlana
  • Domínguez, María Isabel
  • Martínez-Blanes, José M.
  • Centeno, Miguel Ángel
This study focused on the development of vanadium-based catalysts for formic acid production from glucose. The influence of different vanadium precursors on the catalytic activity of titania supported catalysts was contemplated and compared to the performance of commercial and synthesized unsupported V2O5. The obtained results reveal a successful deposition of multiple vanadium species on TiO2 as confirmed by XRD, Raman, and UV-Vis measurements. Catalyst screening identifies V5+ species as main player indicating its important oxidizing potential. Afterwards, the key reaction conditions, as temperature, time, pressure and catalyst loading, were optimized as well as the state of the catalyst after the reaction characterized., Financial support was obtained from Spanish Ministerio de Ciencia e Innovaci\u00F3n (MCIN/AEI / https://doi.org/10.13039/501100011033/ ) and for FEDER Funds \u201Cuna manera de hacer Europa\u201D, Project PID2020-113809RB-C32., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Levulinic to succinic acid transformation over Ru based catalysts

  • Arriaga-Arellano, Luis Alejandro
  • Álvarez-Hernández, Débora
  • Domínguez Leal, María Isabel
  • Martínez-Tejada, Marcela
  • Penkova, Anna
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
In this work ruthenium based catalysts are tested as catalytic systems for the selective oxidation of levulinic to succinic acid. Very different in nature supports have been chosen in order to elucidate the effect of their textural and acidic properties on the final catalytic activity. The influence of Ru particle size is also discussed and proposed as one of the key factors. Medium range ruthenium particles supported on relatively acid supports are the best performing systems in terms of succinic acid yield, while the most active catalysts in terms of conversion result in important carbon loss due to reagent/products full oxidation., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa), Project PID2020-113809RB-C32., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient one-pot synthesis of ruthenium catalysts and their role in optimizing sugar alcohol production: Investigating structural sensitivity

  • Santos-Muñoz, José Luis
  • Murzin, D. Yu
  • Centeno, Miguel Ángel
The study explores the feasibility of producing ruthenium catalysts supported on char through a one-pot synthesis, an original approach for the preparation of noble metal-based catalysts in this field. This method combines high-temperature stages, such as catalytic support carburization and catalyst activation, in a single step. The innovation represents a significant advancement in utilizing cellulose as a model of waste biomass, enhancing its value, and reducing catalyst production costs. The one-pot catalysts were successfully tested in the hydrogenation reaction of sugar mixtures (L-Arabinose and D-Galactose) under mild conditions, achieving full selectivities. The research also introduces for the first time in that reaction a structural sensitivity analysis of the reaction, comparing experimental results with a theoretical model. The findings reveal a direct correlation between catalytic activity and the {0001} exposed face of hcp ruthenium nanoclusters. This discovery opens new avenues for industrial-scale catalyst development, promising substantial reductions in energy and production costs, and emphasizing the economic appeal of the process., Financial support for this work was obtained from Spanish Ministerio de Ciencia e Innovación (No. MCIN/AEI (10.13039/501100011033)/FEDER Funds una manera de hacer Europa), Project PID2020-113809RB-C32 and Junta de Andalucía via Consejería de EconómTransformación ica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (No. P18-RT-3405) all co-financed by FEDER funds from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional Sustainable Carbon Catalyst for Glucose to Fructose Isomerization Reaction

  • Bounoukta, Charf Eddine
  • Lara, Beatriz
  • Delgado-Martín, Gabriel
  • Domínguez, María Isabel
  • Penkova, Anna
  • Ammari, Fatima
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
Two series of functionalized activated carbons have been prepared and used for the glucose to fructose isomerization reaction. Alkali earth chlorides and alkali halides have been chosen for the functionalization with the final goal to study the effect of cation and anion variation on isomerization activity. A part of the samples has been subjected to an activation procedure giving rise to the formation of new active sites of a distinct type and composition. The active site nature and density greatly influenced the reaction mechanism, giving rise to combined pathways catalyst with increased activity and fructose selectivity. The functionalization with MgCl2 resulted in a very stable and performant catalyst with an optimal fructose yield of 33% at 140 °C in only 20 min reaction time and during four cycles of reutilization., Financial support was obtained from the Spanish Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa, Projects ENE2017-82451-C3-3-R and PID2020-113809RB-C32. Also, the financial support from Junta de Andalucía via Consejería de Transformación Económica, Industria, Conocimiento y Universidades and its PAIDI 2020 program (Grant P18-RT-3405) co-financed by FEDER funds from the European Union is welcomed. Charf Eddine Bounoukta acknowledges Universidad de Sevilla and the Directorate General for Scientific Research and Technological Development (DGRSTD) of the Algerian Ministry of Higher Education (MESRS) for his project scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formic acid dehydrogenation and use as H-donor in 5-hydroxymethylfurfural hydrodeoxygenation over Pd/C3N4 catalysts

  • Achour, Mahdi
  • Álvarez-Hernández, Débora
  • Megías-Sayago, Cristina
  • Ammari, Fátima
  • Centeno, Miguel Ángel
  • Ivanova, Svetlana
Topic name Formic Acid; Carbon Dioxide; Dehydrogenation Prominence percentile, This work studies the behavior of a series of Pd/C3N4 catalyst in the reaction of formic acid dehydrogenation and the use of the latter as H-donor for 2,5-hydroxymethyl furfural hydrodeoxygenation. Firstly, a series of supports have been synthesized from melamine and urea as a function of precursors ratio and temperature of their condensation. The different synthetic conditions resulted in materials with very different specific surface areas and N-containing groups on the surface which influenced Pd deposition. The resulting defects facilitated enhanced electron transfer from nitrogen to Pd due to the close positioning of Pd nanoparticles near nitrogen sites. Consequently, the physicochemical and catalytic properties of the materials were notably impacted., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/501100011033/) and for FEDER Funds una manera de hacer Europa), project PID2020–113809RB-C32 and PID2023–147861OB-C22. Mahdi Achour acknowledges the Directorate General for Scientific Research and Technological Development (DGRSTD) of Algerian Ministry of Higher Education (MESRS) and ERASMUS KA-171 program for his PhD scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting Hydrogen Release: Optimized C3N4-Supported Palladium Catalysts for Formic Acid Dehydrogenation

  • Moreno, Antonio
  • Lobo, L.
  • Martínez Tejada, L.M.
  • Bobadilla, Luis F.
  • Ivanova, Svetlana
  • Domínguez Leal, María Isabel
  • Centeno, Miguel Ángel
Carbon nitride, C3N4, was synthesized through thermal polycondensation of melamine with varying temperature and time conditions. This approach represents a cost-effective, straightforward, and environmentally friendly synthetic method with lower energy consumption to obtain hierarchically structured carbon nitride. The resulting materials were subjected to comprehensive characterization to analyze their crystalline structure, textural properties, composition, and light absorption characteristics. To evaluate their catalytic potential, the supports were impregnated with different loadings of palladium (1, 5, and 10 wt%) as the active phase and tested in the decomposition of formic acid for hydrogen production in liquid phase at mild conditions. This study revealed that the structure and composition of the C3N4 were highly dependent on the degree of polycondensation, which in turn was influenced by the temperature and the thermal synthesis process. The most promising catalytic performance was achieved with a support prepared by decomposing melamine at 650 °C for 4 h, followed by impregnation with 10 wt% Pd. Furthermore, a mechanistic study was conducted using operando DRIFTS-MS to explore the plausible catalytic pathways for synthesizing formic acid via CO2 hydrogenation using the aforementioned catalyst. This investigation highlights the potential of C3N4 as a support, further demonstrating its versatility in the circular economy of formic acid., The financial support was obtained from the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033/) and FEDER Funds (una manera de hacer Europa) for the grants PID2020-113809RB-C32 and PID2023-147861OB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of external carbon sources on the morpho-structural and mechanical properties of 3D-structured carbon monoliths

  • Delgado-Martín, Gabriel
  • Domínguez Leal, María Isabel
  • Martínez-Tejada, Marcela
  • Centeno, Miguel Ángel
High purity carbon structured devices have been prepared by resorcinol-formaldehyde polycondensation in aqueous medium and alkaline conditions with starch as a binder and various external carbon sources. Polylactic acid (PLA) templates have been used to perform the structures which, after controlled and fixed pyrolysis conditions, generate 3D carbon devices with tuneable geometry and properties, as well as mechanical integrity. This study investigates the influence of the nature of the added carbon (activated charcoal, powdered graphite, multi-walled carbon nanotubes, cellulose-derived biocarbon, and synthetic carbon xerogel) on the morpho-structural and mechanical properties of the resulting monoliths. The nature and proportion of the added carbon significantly affect crystallinity, porosity, surface area, and compressive strength. The addition of either carbon xerogel or carbon obtained by pyrolysis of cellulose allows obtaining structures with channels with suitable mechanical properties with no volume reduction or structural collapse. The best mechanical properties are obtained using carbon xerogel as additive, as it allows using a higher C/OS weight ratio (1.61), giving an apparent density of 0.79 g/cm3 and compressive strength (σ) of 5.4 MPa. The use of sustainable cellulose-derived carbon as additive results in a monolith with lower mechanical properties (apparent density = 0.46 g/cm3, σ = 1.4 MPa), probably due to the lower C/OS ratio (0.42) but higher mesoporosity (42 vs. 17 %), emerging as the most promising candidate for structured catalytic support applications. The methodology enables the fabrication of high-purity carbon structures with customizable properties suitable for advanced catalytic processes., Financial support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/501100011033/) and for FEDER Funds (Una manera de hacer Europa), Project PID2020-113809RB-C32., Peer reviewed