Skip to main content

FABRICACION ADITIVA DE ESTRUCTURAS TRIDIMENSIONALES DE CARBONO POROSO A PARTIR DE LACTOSUERO

PID2020-115334GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Whey-derived porous carbon scaffolds for bone tissue engineering

  • Llamas-Unzueta, Raúl
  • Suárez, Marta
  • Fernández, Adolfo
  • Díaz, Raquel
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
This article belongs to the Special Issue Bio-Inspired Porous Materials and Biomaterials., Porous carbon structures derived from whey powders are described and evaluated as potential scaffolds in bone tissue engineering. These materials have a porosity between 48% and 58%, with a hierarchical pore size distribution ranging from 1 to 400 micrometres. Compressive strength and elastic modulus are outstanding for such a porous material, being up to three times better than those of traditional HA or TCP scaffolds with similar porosities. They also present non-cytotoxic and bioactive behavior, due to their carbon-based composition that also includes some residual mineral salts content., This research was funded by MINECO and MICINN, grant numbers CTQ2017-87820-R and PID2020-115334GB-I00, respectively; and Principado de Asturias–FICYT-FEDER, grant number IDI/2018/000118. Raúl Llamas thanks the Spanish National Research Council (CSIC) for funding received through the Project PIE 202080E276., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From whey robocasting to custom 3D porous carbons

  • Llamas-Unzueta, Raúl
  • Menéndez Díaz, José Ángel
  • Suárez, Marta
  • Fernández, Adolfo
  • Montes Morán, Miguel Ángel
We describe how robocasting and carbonisation of partially dehydrated whey, a surplus of the dairy industry, produced 3D porous carbons with custom morphologies. A relatively simple printing device was first used to manufacture 3D structures of whey pastes. The whey pastes behaved as a thermoset polymer when heated hence keeping the original shape of the printed pieces upon carbonisation, albeit an isotropic size reduction (23%) due to thermal shrinkage. The rheological properties of the whey pastes were similar to those of other inks commonly used in direct ink writing, with a shear thinning behaviour and static and dynamic yield stresses that predicted their printability in most robocasting devices. Once the 3D whey structures were printed, a heat-curing process was required to avoid the uncontrolled emission of volatiles that would otherwise distort them. When doing so, 3D lattices of carbon filaments with ca. 500 µm in diameter and ca. 425 µm mesh size were manufactured. The ash content of the carbonised structures, which is related to the salt content of the original whey, was reduced by conventional washing procedures, bringing about 3D hierarchical porous carbons (70% porosity) with modest specific surface areas (500 m2/g) and relatively high compressive strengths (5 MPa)., The authors acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020–115334GB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO2 Gasification Reactivity and Syngas Production of Greek Lignite Coal and Ex-Situ Produced Chars under Non-Isothermal and Isothermal Conditions: Structure-Performance Relationships

  • Lampropoulos, Athanasios
  • Binas, Vassilios D.
  • Zouridi, Leila
  • Athanasiou, Costas
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Konsolakis, Michalis
  • Marnellos, George E.
The presented work explores the structural properties, gasification reactivity, and syngas production of Greek lignite fuel (LG) and ex-situ produced chars during CO2 gasification. Three different slow pyrolysis protocols were employed for char production involving torrefaction at 300◦C (LG300), mild-carbonization at 500◦C (LG500), and carbonization at 800◦C (LG800). Physicochemical characterization studies, including proximate and ultimate analysis, X-ray Diffraction (XRD), and Raman spectroscopy, revealed that the thermal treatment under inert atmospheres leads to chars with increased fixed carbon content and less ordered surface structures. The CO2 gasification re-activity of pristine LG and as-produced chars was examined by thermogravimetric (TG) analysis and in batch mode gasification tests under both isothermal and non-isothermal conditions. The key parameters affecting the devolatilization and gasification steps in the overall process toward CO-rich gas mixtures were thoroughly explored. The gasification performance of the examined fuels in terms of carbon conversion, instant CO production rate, and syngas generation revealed an opposite reactivity order during each stage. TG analysis demonstrated that raw lignite (LG) was more reactive during the thermal devolatilization phase at low and intermediate temperatures (da/dtmax,devol. = 0.022 min−1 ). By contrast, LG800 exhibited superior gasification reactivity at high temperatures (da/dtmax,gas. = 0.1 min−1 ). The latter is additionally corroborated by the enhanced CO formation of LG800 samples under both non-isothermal (5.2 mmol) and isothermal (28 mmol) condi-tions, compared to 4.1 mmol and 13.8 mmol over the LG sample, respectively. The pronounced CO2 gasification performance of LG800 was attributed to its higher fixed carbon content and disordered surface structure compared to LG, LG300, and LG500 samples., This research was co-financed by the European Union and Greek national funds through the Operational Program Competitiveness, Entrepreneurship and Innovation, under the call RESEARCH-CREATE-INNOVATE (project code: T1EDK-01894). Funds from the MCIN/AEI/10.13039/501100011033 (Grant PID2020-115334GB-I00) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Whey as a sustainable binder for the production of extruded activated carbon

  • Llamas-Unzueta, Raúl
  • Montes Morán, Miguel Ángel
  • Ramírez Montoya, Luis Adrián
  • Concheso Álvarez, Alejandro
  • Menéndez Díaz, José Ángel
Whey, the main by-product of the dairy industry, is proposed as a sustainable binder for the production of extruded activated carbon. Coconut shell char was mixed with controlled quantities of either rehydrated whey powders or partially dehydrated liquid whey. After extrusion, extrudates were dried, and carbonised or activated under N2 or CO2 atmosphere, respectively. A comprehensive study of the effect of different parameters including binder proportion, coconut shell char particle size and carbonisation temperature was carried out. The composition of whey prompted Maillard reactions boosted with temperature that conferred a resin-like behaviour to the binder. Quality parameters of the resulting extrudates were their ball-mill hardness, real and bulk densities. All whey-bound pellets retained their original shape after the high temperature treatment. The hardness of those whey extrudates was particularly remarkable considering the biomass origin of this binder. The carbonisation temperature had little effect in the hardness or densities of the carbon pellets. The best pellet formulation comprised the use of coconut shell char powders with particle sizes < 212 µm, in mixtures having a 7/3 char/dry whey mass ratio. The properties of the pellets obtained after the activation of such pellets were comparable to those of commercial activated carbon extrudates. The use of partially dehydrated liquid whey rather than re-hydrated dry whey rendered very similar results. The alkalinity of the binder made the resulting activated carbons adequate for H2S removal at room temperature. An economic estimation of the process placed whey in a practical position within the binder market., The authors gratefully acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033) (Project PID2020-115334GB-I00) and Principado de Asturias (FICYT) – European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative study of binderless zeolites and carbon molecular sieves as adsorbents for CO2 capture processes

  • Gutierrez-Ortega, A.
  • Montes Morán, Miguel Ángel
  • Parra Soto, José Bernardo
  • Sempere, J.
  • Nomen, R.
  • Gonzalez-Olmos, R.
CO2 capture from concentrated sources such as power plants will play an important role in reducing CO2 emissions, contributing to climate change mitigation. Adsorption technology has attracting scientific attention because it offers improved energy efficiency and reduced costs. Two of the most used families of adsorbents in the industry are zeolites and carbon-based adsorbents. This study compares the CO2 separation performance of two promising groups of adsorbents belonging to these families: binderless zeolites and carbon molecular sieves (CMSs). Five adsorption key performance indicators (KPIs), namely adsorption capacity, working capacity, regenerability, selectivity and adsorption selection parameter were obtained from the adsorption isotherms (CO2 and N2; measured at 0-10 bar and 283-323 K) and used to assess the potential of the adsorbents for CO2 capture processes. In general, the KPIs were better for binderless zeolites than for CMSs although CMSs had better regenerability. Zeolites 13XBL and 5ABL were selected as the most promising adsorbents and were tested in a laboratory column set-up for dynamic adsorption of a CO2/N2 mixture (15%/85% v/v), resembling a dry flue gas composition. Simulations of column adsorption experiments were then carried out combining an extended dual-site Langmuir (DSL) model for binary mixtures with Aspen Adsorption™. Binderless zeolite 13XBL showed a higher selectivity with a lower dependence on the pressure and temperature of adsorption, when compared to zeolite 5ABL. These results show that the 13XBL can be considered a good adsorbent for CO2/N2 separations., The authors gratefully acknowledge the funding provided by the company GasN2 and the knowledge and enterprise department of the Catalan government through its Industrial Doctorate program to support this research project (AGAUR, Doctorats Industrials 2014 DI-057). Special thanks to graduates students Carlos Arregui and Guillermo Parladé for their help and support provided with the modeling and master student Albert Melis for the support with column experiments. GESPA group has been recognized as Consolidated Research Group by the Catalan Government with code 2017-SGR-1016. The authors gratefully acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020-115334GB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). Miguel Montes is member of the SusPlast PTI+ platform of the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles de grafeno como materiales para extracción en fase sólida

  • Flores-López, Samantha L.
  • Santos Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
Los autores agradecen la financiación recibida por parte del Ministerio de Ciencia e Innovación de España y de la Unión Europea NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI- 10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 y PID2020- 113001RB-I00 MCIN/AEI-10.13039/501100011033), así como la ayuda del Principado de Asturias (AYUD/2021/50921, IDI/2021/000015 y Programa Severo Ochoa de SLF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reduced graphene oxide aerogels cartridges for solid phase extraction of benzotriazoles

  • Flores-López, Samantha L.
  • Arenillas de la Puente, Ana
  • Mikšík, Ivan
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes. This work evaluates the potential of novel reduced graphene oxide aerogels (rGO) as extractants of mixtures of three UV-benzotriazoles in water at low concentrations. These rGO aerogels incorporate graphenic domains into a tough structure of polymeric chains by adding graphene oxide during the synthesis of resorcinol-formaldehyde gels. Aerogels with a different content and ordering of graphenic domains were obtained and characterized using Raman, XRD, SEM and nitrogen adsorption isotherms (−196 °C). The rGO aerogels that performed better as solid phase extractants were those containing 60% rGO. Aerogels with lower rGO contents (40%) required a high-temperature (2000 °C) treatment to render competitive results. The SPE methodology using selected rGO aerogels was optimized by varying the elution solvent, elution time and volume. The best performances, i.e., recoveries of 80–100% and enrichment factors of 12.5–50, were accomplished when using 0.8 mL of tetrahydrofuran (THF) as an elution solvent. As a result, a fast (10 min) and simple extraction method of UV-benzotriazoles in water was attained, achieving a detection limit of 1 ng mL−1. Selected aerogels were finally tested for the SPE of spiked samples of river waters, showing a similar performance to that observed with synthetic mixtures., This research was funded by Consejo Superior de Investigaciones Científicas (CSIC), grant number I-LINK1200; Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR, grant numbers PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033; Principado de Asturias (FICYT)–European Union (FEDER), grant number PCTI-Asturias IDI/2021/000015; and Czech Science Foundation, grant number 20-03899S. S.L.F.-L. acknowledges her predoctoral grant from the Severo Ochoa Program, awarded by Principado de Asturias. J.A.M. and M.A.M.-M. are members of the CSIC Interdisciplinary Thematic Platform (PTI+) for Sustainable Plastics towards a Circular Economy (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Obtención de carbones porosos 3D mediante fabricación aditiva usando lactosuero como precursor

  • Llamas-Unzueta, Raúl
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
Estudios financiados por el Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033) (Proyecto PID2020-115334GB-I00) y el Principado de Asturias (FICYT) - European Union (FEDER) (Proyecto PCTI-Asturias IDI/2021/000015). J.Angel Menéndez y Miguel Montes son miembros de la plataforma PTI+SUSPLAST del CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Novel Ordered Carbon Materials for the Analysis of Aromatic Compounds

  • Flores-López, Samantha L.
  • Santos-Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
This work was financed by Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI- 10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033). LdSG and SLF gratefully acknowledges to Ministerio de Ciencia e Innovación de España and Principality of Asturias for their post and predoctoral grants (IJC2020-044746-I and Severo Ochoa Program), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed kinetic analysis and modelling of the dry gasification reaction of olive kernel and lignite coal chars

  • Lampropoulos, Athanasios
  • Varvoutis, Georgios
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Konsolakis, Michalis
  • Marnellos, George E.
The dry gasification process of solid fuels is a promising pathway to mitigate and utilize captured CO2 emissions toward syngas generation with tailored composition for several downstream energy conversion and chemical production processes. In the present work, comprehensive kinetic analysis and reaction modelling studies were carried out for olive kernel and lignite coal chars gasification reaction using pure CO2 as gasifying agent. Chars reactivity and kinetics of the gasification reactions were thoroughly examined by thermogravimetric analysis at three different heating rates and correlated with their physicochemical properties. The reactivity of olive kernel char, as determined by the mean gasification reactivity and the comprehensive gasification characteristic index, S, was almost three times higher compared to that of the lignite coal char. It was disclosed that the fixed carbon content and alkali index (AI) have a major impact on the reactivity of chars. The activation energy, Ea, estimated by three different model-free kinetic methods was ranged between 140 and 170 kJ/mol and 250–350 kJ/mol for the olive kernel and lignite coal chars, respectively. The activation energy values for the lignite coal char significantly varied with carbon conversion degree, whereas this was not the case for olive kernel char, where the activation energy remained essentially unmodified throughout the whole carbon conversion range. Finally, the combined Malek and Coats-Rendfrem method was applied to unravel the mechanism of chars-CO2 gasification reaction. It was found that the olive kernel char-CO2 gasification can be described with a 2D-diffusion mechanism function (D2) whereas the lignite coal char-CO2 gasification follows a second order chemical reaction mechanism function (F2)., This research has been co-financed by the European Union and Greek national funds through the Operational Program Competitiveness, Entrepreneurship and Innovation, under the call ERA-NETS 2018 (project code: Τ8ΕΡΑ2-00005). MAM and JAM acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020-115334 GB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon-based materials boost the anaerobic treatment of slaughterhouse wastewater

  • Ramírez Montoya, Luis Adrián
  • Valenzuela, Edgardo I.
  • De Velasco-Maldonado, Paola S.
  • Hernández-Montoya, Virginia
  • Menéndez Díaz, José Ángel
  • Montes-Morán, Miguel A.
  • Cervantes, Francisco J.
Carbon-based materials were tested as methanogenic boosters to enhance the anaerobic treatment slaughterhouse wastewater, which included an organic xerogel (OX) doped with graphene oxide, a peach stone carbon (PSC), and a monolithic whey carbon (MWC). Enhanced treatment by the carbon-based boosters was evident in terms of organic matter removal and methane production rate, which was globally reflected on a superior methanogenic conversion efficiency as compared to the unamended control. OX appeared as the best methanogenic booster increasing up to 77 % and 12 % the methane production rate and organic matter removal, respectively. The obtained results suggest that hydrolysis and acidification of the complex wastewater were the limiting steps during the treatment of this industrial effluent. This observation is consistent with the higher production of ammonium, derived from protein hydrolysis, which occurred in bioreactors amended with carbon-based materials, as compared to the unamended control. Several changes in the relative abundance of key microbial taxa occurred; particularly, members of the bacterial families Synergistaceae and Anaerolineaceae, as well as the archaeal Methanolinea and Proteiniclasticum genera, increased significantly in the presence of OX. The synthesized materials are proposed to improve the performance of anaerobic treatment systems dealing with complex wastewaters., LARM acknowledges fellows from UNAM (DGAPA grant number COIC/DDTPA/064/2020) and CONACYT (CVU 330625). This research was financially supported by UNAM (grants DGAPA-PAPIIT TA200122 and GII 3406) and by the Council of Science and Technology of Querétaro (CONCYTEQ, grant CACTI/90/2022), the Ministerio de Ciencia e Innovación de España (MCIN/AEI/10.13039/501100011033) (Project PID2020-115334GB-I00) and by the Principado de Asturias (FICYT) - European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water reclamation from anodizing wastewaters by removing reactive silica with adsorption and precipitation methods

  • Acosta-Herrera, Andrea Alejandra
  • Hernández-Montoya, Virginia
  • Tovar-Gómez, Rigoberto
  • Pérez-Cruz, María A
  • Montes Morán, Miguel Ángel
  • Rangel-Vázquez, Norma A
  • Cervantes, Francisco J
Water stress is a current environmental menace mainly driven by over exploitation of aquifers, which is triggering poor water quality with high concentration of minerals in extracted groundwater. Particularly, silica is widespread in natural water supplies due to weathering processes of silicates occurring in contact with water, light, air, and other factors. However, due to groundwater over extraction the concentration of silica has increased during the last years in aquifer reservoirs from Aguascalientes State (México). In this context, it is very important to note that the removal of silica compounds from water is challenging and different methods can be used to avoid embedding problems in different industries. In the present work, the removal of reactive silica from synthetic solutions as well as from real wastewaters from an industrial anodizing process was studied using adsorption and chemical precipitation methods. Twelve commercial materials of different nature were used for adsorption tests, while seven precipitant agents were applied in the precipitation experiments. Adsorption tests were performed in batch systems with constant stirring at 30 °C and at different pH values (7 and 9). Precipitation experiments were carried out in batch systems and the best conditions for silica removal were found using an L9 orthogonal array of the Taguchi method employing molar ratio, pH of wastewater, stirring time and temperature as experimental factors. Adsorption results showed that Ferrolox (Iron (III) hydroxide-base adsorbent) was the most efficient sorbent for reactive silica removal from synthetic solutions and the anodizing wastewater. Also, the reactive silica adsorption was higher at pH 9 as compared to that measured at pH 7 and the adsorbed quantity at pH 9 was 16.22 and 11.25 mg/g for the synthetic solution and anodizing wastewater, respectively. According to molecular simulation, the main interaction between Ferrolox and silica species was related to the formation of hydroxo-complexes and to the interaction of Fe with oxygen of silica species. Additionally, magnesium chloride was the best precipitating reagent for reactive silica achieving up to 87% removal. According to ANOVA analysis of Taguchi method, pH was the most influential factor during the precipitation of reactive silica with a variance value of 81.42, while values lower than 3 were obtained for the rest of parameters. Overall, the present work is reporting for the first time the removal of reactive silica from anodizing wastewaters with promising results that can be implemented at full scale for water reclamation, which may significantly contribute to manage water reservoir in the region sustainably., This work was supported by TECNM (Project 7949.20-P), Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020-115334 GB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). MC. Acosta-Herrera acknowledges the grant (731286) received from CONACyT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3D printed catalytic stirrers with permeable blades made of porous carbon

  • Llamas Unzueta, Raúl
  • Reguera-García, Alejandro
  • Sanz, Isabel
  • Martin, Celia
  • Quintanilla, Asuncion
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
This work introduces a new type of catalytic stirrer made entirely of porous carbon. These stirrers are made by printing 3D structures directly from whey pastes that were subsequently carbonised to produce impellers with meshed surfaces made of porous carbon with up to a 3 % N content. The characteristics of the carbon pieces include a high porosity of approximately 70 %, mainly in the macropore range, although there is also some development of mesoporosity and microporosity obtained by a simple washing process with HCl (SBET = 400 m2/g). The blades are strong (mechanical strength of 165 Pa) and able to sustain high stirring speeds (2000 rpm) immersed in highly viscous fluids without damage. The blade design of the stirrer is optimised to provide effective mixing, and to facilitate fluid circulation through the blades, as demonstrated experimentally and by CFD simulation. All these characteristics are expected to enhance the contact between the catalyst and the reactants and/or favour the deposition of selected catalysts on their surfaces., The authors acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020–115334GB-I00, Project TED2021–130312B-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). J. Angel Menéndez and Miguel Montes are members of the PTI+SusPlast of the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of a stacked Archimedean spiral reactor with porous carbon walls using 3D-printed PLA as internal sacrificial template and carbonized whey powder as porous carbon matrix

  • Llamas Unzueta, Raúl
  • Reguera-García, Alejandro
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
This study introduces a method to create porous carbon structures with intricate internal voids. 3D-printed PLA acts as an internal sacrificial template, combined with carbonized whey powder as the porous carbon matrix. Sintering whey powder at 150°C yields solid pieces that, upon carbonization, result in highly porous carbon objects while maintaining the original mold shape. Temperature control ensures successful whey powder sintering before PLA melting. The use of PLA sacrificial templates, along with whey carbonization, allows for developing devices with finely tailored internal voids, as demonstrated through a double Archimedean spiral reactor with porous carbon walls. Graphical abstract: (Figure presented.)., The authors acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033, Project PID2020–115334GB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). J.A.M. and M.A.M.M. are members of the PTI+SusPlast of the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

  • Rodríguez Lagar, Pablo
  • Reguera-García, Alejandro
  • LlamasUnzueta, Raúl
  • Rodrı́guez, Clara
  • Santamaría Ramírez, Ricardo
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Rocha, Victoria G.
We offer the possibility of implementing a lab-made extruder for direct ink writing (DIW) into a conventional fused deposition modelling (FDM) 3D printer. The ink extruder was designed to comply with various requirements including the possibility of using multiple syringe volumes, ease of assembly, compatibility with numerous commercial FDM printers, ink retraction and ink flow control and the ability to extrude inks with a wide range of viscosities (ink yield stresses from 135 to 1100 Pa). The load in the extruder was attained by combining a stepper motor and a gear reduction system. The reduction system was connected to a trapezoidal threaded spindle through a rigid coupler. The movement of the spindle was transmitted to the plunger of a syringe that contained the ink (with volumes ranging from 3 to 30 mL), by means of a linear guide system. Most of the extruder parts were printed with the same FDM printer to which the DIW extruder ended attached to. The DIW extruder wiring connections were simply made by using the E-axis connectors available in the FDM printer. Modifications of the FDM printer software required for the correct control of the DIW extruder were also relatively simple, avoiding firmware modification. This simplicity made the two DIW and FDM heads easily interchangeable, thus amplifying the functionality of a conventional FDM printer. The cost of this new DIW extruder is approx. 100€., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by the Spanish Ministry of Science and Innovation, Grants PID2020-115334GB-I00 and PID2022-138442OB-C21 (MCIN/AEI/10.13039/501100011033); Grants TED2021-130372BC41 and CNS2022-135465 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”; and by the Principado de Asturias (FICYT) - European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide-doped organic xerogel and magnetite enhance the anaerobic treatment of winery wastewater

  • Ramírez Montoya, Luis Adrián
  • Díaz-Muñiz, Christopher A.
  • Valenzuela, Edgardo I.
  • Banda-Calderón, D. Sebastian
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
  • Cervantes, Francisco J.
Winery wastewater is a high-strength effluent, which is challenging for anaerobic treatment systems. In this study, magnetite and an organic xerogel doped with graphene oxide (OX-GO) were tested as booster materials (BMs) during the anaerobic treatment of winery wastewater. The enhancing effect was clearly reflected in higher methane production rates (up to 25 % increase) and greater organic matter removal (up to 18 % increase) in amended reactors, as compared to the unamended control. BMs also increased the hydrolysis of proteins coupled to biogas production. Furthermore, the organic acids-enriched composition of winery effluents allowed the production of valuable medium-chain carboxylic acids by tuning operational conditions. Finally, the relative abundance of specialized microbial populations, such as β-oxidizing/proteolytic bacteria (Syntrophomonas) and hydrogenotrophic methanogens (Methanobacterium) increased in the anaerobic systems. Particularly, the presence of BMs promoted the enrichment of specific bacterial genera, including Rhodopseudomonas, Propionicicella, Acetobacter and Anaerolinea, as well as proteolytic genera like Proteiniborus and Proteiniphilum. Moreover, the genus Caproiciproducens exhibited significant fold-changes when OX-GO was added, which is crucial for organic acids production and chain elongation. These BMs are proposed as potential additives in anaerobic systems to boost their performance during the treatment of high-strength industrial effluents., LARM acknowledges fellow from CONAHCYT (CVU 330625). This research was financially supported by UNAM (grants DGAPA-PAPIIT TA200122, IT100224 and GII 3406), Secretariat of Sustainable Development of the State of Querétaro (SEDESU, Querétaro Mexico), Ministerio de Ciencia e Innovación de España (MCIN/AEI/10.13039/501100011033) (Project PID2020-115334GB-I00) and by Principado de Asturias (FICYT) - European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015). J. Angel Menéndez and Miguel Montes are members of the SusPlast PTI+ of the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Porous carbons with complex 3D geometries via selective laser sintering of whey powder

  • Llamas Unzueta, Raúl
  • Reguera-García, Alejandro
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
In addition to the inherent limitations of carbons to melt or flow, a vast majority of carbon precursors deforms during carbonisation, with stereolithography of thermoset resins being the preferred technology for 3D printing of carbons. An alternative is now presented with the possibility of using a melting-based technology, selective laser sintering (SLS), to fabricate 3D structures that withstand carbonisation. The key factor that makes this happen is whey powder, a natural, abundant and cheap by-product of the dairy industry. When heating the whey powder with a laser at 180-200 ºC for a few seconds, whey particles sinter, and 3D structures are obtained layer-by-layer. Carbonisation of the sintered whey structures brings about 3D porous carbons with excellent mechanical properties that preserve the SLS printed form albeit an isotropic shrinkage (approx. 23%). Melanoidins are identified as responsible for both the sintering and the thermoset behaviour during carbonisation of the whey powder., The authors acknowledge the financial support received from the Ministerio de Ciencia e Innovación (MCIN/AEI/https://doi.org/10.13039/501100011033, Project PID2020-115334GB-I00) Ministerio de Ciencia, Innovación y Universidades (MICIU/AEI/https://doi.org/10.13039/501100011033, Project PID2023-147490OB-I00) and Principado de Asturias (FICYT)-European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015), Peer reviewed