Skip to main content

REGULACION DINAMICA MULTI-ESCALA EN INGENIERIA METABOLICA: CONTROL REALIMENTADO Y CICLO DBTL AUTOMATIZADO

PID2020-117271RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multicolor plate reader fluorescence calibration

  • Beal, Jacob
  • Telmer, Cheryl A.
  • Baldwin, Geoff S.
  • Hallett, Liam
  • Lee, Taeyang
  • Selvarajah, Vinoo
  • Billerbeck, Sonja
  • Brown, Bradley
  • Cai, Guo-nan
  • Cai, Liang
  • Eisenstein, Edward
  • Kiga, Daisuke
  • Ross, David
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
[EN] Plate readers are commonly used to measure cell growth and fluorescence, yet the utility and reproducibility of plate reader data is limited by the fact that it is typically reported in arbitrary or relative units. We have previously established a robust serial dilution protocol for calibration of plate reader measurements of absorbance to estimated bacterial cell count and for green fluorescence from proteins expressed in bacterial cells to molecules of equivalent fluorescein. We now extend these protocols to calibration of red fluorescence to the sulforhodamine-101 fluorescent dye and blue fluorescence to Cascade Blue. Evaluating calibration efficacy via an interlaboratory study, we find that these calibrants do indeed provide comparable precision to the prior calibrants and that they enable effective cross-laboratory comparison of measurements of red and blue fluorescence from proteins expressed in bacterial cells., This work was supported in part by the following funding sources: J.B. was supported by Air Force Research Laboratory (AFRL) and DARPA contract FA8750-17-C-0184. N.S. was supported by funding from the BBSRC under award BB/M011178/1. G.B., L.H., and T.L. were supported by the EPSRC under award EP/R034915/1 and EP/S022856/1. G.C. and L.C. were supported by funds from YF Capital and the National Top Talent Undergraduate Training Program, China. A.V. and Y.B. were funded by Grant MINECO/AEI, EU DPI2017-82896-C2-1-R and MCIN/AEI/10.13039/501100011033 grant number PID2020117271RB-C21. Y.B. was supported by Secretaria de Educaci ' on Superior, Ciencia, Tecnologia e Innovacion-Ecuador (Scholarship Convocatoria Abierta 2011). D.K. was supported by JST, CREST Grant Number JPMJCR21N4, Japan. E.Y. was supported by the National Science Foundation under Grant No. 1939860. J.T. was supported by the Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA) under Finding Engineering Linked Indicators (FELIX) program contract N66001-18-C-4507. This document does not contain technology or technical data controlled under either the U.S. International Traffic in Arms Regulations or the U.S. Export Administration Regulations. Views, opinions, and/or findings expressed are those of the author(s) and should not be interpreted as representing the official views or policies of the Department of Defense or the U.S. Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transcription factor-based biosensors for screening and dynamic regulation

  • Tellechea-Luzardo, Jonathan
  • Stiebritz, Martin T.
  • Carbonell, Pablo|||0000-0002-0993-5625
[EN] Advances in synthetic biology and genetic engineering are bringing into the spotlight a wide range of bio-based applications that demand better sensing and control of biological behaviours. Transcription factor (TF)-based biosensors are promising tools that can be used to detect several types of chemical compounds and elicit a response according to the desired application. However, the wider use of this type of device is still hindered by several challenges, which can be addressed by increasing the current metabolite-activated transcription factor knowledge base, developing better methods to identify new transcription factors, and improving the overall workflow for the design of novel biosensor circuits. These improvements are particularly important in the bioproduction field, where researchers need better biosensor-based approaches for screening production-strains and precise dynamic regulation strategies. In this work, we summarize what is currently known about transcription factor-based biosensors, discuss recent experimental and computational approaches targeted at their modification and improvement, and suggest possible future research directions based on two applications: bioproduction screening and dynamic regulation of genetic circuits., JT-L was supported by European Union Marie Sklodowska-Curie Action Individual Postdoctoral Fellowship (Grant agreement ID: 101062593). JT-L was supported by the Next-Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). MS was supported by the NextGeneration EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a María Zambrano personal grant from the Spanish Ministry of Universities (UNI/551/2021). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through PID2020-117271RB-C2 (BIODYNAMICS). PC was supported by the Spanish Ministry of Universities (UNI/551/2021), grant number UP 2021-036 funded by European Union - Next-generation EU. This research received financial support from Generalitat Valenciana through grant CIAICO/2021/159 (SmartBioFab). PC acknowledges MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR funding through grant TED 2021-131049 B-I00 (BioEcoDBTL). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through grant PID 2021-127888NA-I00 (COMPSYNBIO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Multi-Scale Host-Aware Modeling for Analysis and Tuning of Synthetic Gene Circuits for Bioproduction

  • Santos Navarro, Fernando Nóbel
[ES] Esta Tesis ha sido dedicada al modelado multiescala considerando al anfitrión celular para el análisis y ajuste de circuitos genéticos sintéticos para bioproducción. Los objetivos principales fueron: 1. El desarrollo de un modelo que considere el anfitrión celular de tamaño reducido enfocado para simulación y análisis. 2. El desarrollo de herramientas de programación para el modelado y la simulación, orientada a la biología sintética. 3. La implementación de un modelo multiescala que considere las escalas relevantes para la bioproducción (biorreactor, célula y circuito sintético). 4. El análisis del controlador antitético considerando las interacciones célula-circuito, como ejemplo de aplicación de las herramientas desarrolladas. 5. El desarrollo y la validación experimental de leyes de control robusto para biorreactores continuos. El trabajo presentado en esta Tesis cubre las tres escalas del proceso de bioproducción. La primera escala es el biorreactor: esta escala considera la dinámica macroscópica del sustrato y la biomasa, y como estas dinámica se conecta con el estado interno de las células. La segunda escala es la célula anfitriona: esta escala considera la dinámica interna de la célula y la competencia por los recursos limitados compartidos para la expresión de proteínas. La tercera escala es el circuito genético sintético: esta escala considera la dinámica de expresión de los circuitos sintéticos exógenos y la carga que inducen en la célula anfitriona. Por último, como <<cuarta>> escala, parte de la Tesis se ha dedicado a desarrollar herramientas de software para el modelado y la simulación. Este documento se divide en siete capítulos. El Capítulo 1 es una introducción general al trabajo de la Tesis y su justificación; también presenta un mapa visual de la Tesis y enumera las principales contribuciones. El Capítulo 2 muestra el desarrollo del modelo del anfitrión celular (los Capítulos 4 y 5 hacen uso de este modelo para sus simulaciones). El Capítulo 3 presenta OneModel: una herramienta de software desarrollada en la Tesis que facilita el modelado y la simulación en biología sintética, en particular, facilita el uso del modelo del anfitrión celular. El Capítulo 4 utiliza el modelo del anfitrión celular para montar el modelo multiescala que considera el biorreactor y analiza el título, la productividad y el rendimiento en la expresión de una proteína exógena. El Capítulo 5 analiza un circuito más complejo, el recientemente propuesto y muy citado controlador biomolecular antitético, utilizando el modelo del anfitrión celular. El Capítulo 6 muestra el diseño de estrategias de control no lineal que permiten controlar la concentración de biomasa en un biorreactor continuo de forma robusta. El Capítulo 7 resume y presenta las principales conclusiones de la Tesis. En el Apéndice A se muestra el desarrollo teórico del modelo del anfitrión celular. Esta Tesis destaca la importancia de estudiar la carga celular en los sistemas biológicos, ya que estos efectos son muy notables y generan interacciones entre circuitos aparentemente independientes. La Tesis proporciona herramientas para modelar, simular y diseñar circuitos genéticos sintéticos teniendo en cuenta estos efectos de carga y permite el desarrollo de modelos que conecten estos fenómenos en los circuitos genéticos sintéticos, que van desde la dinámica intracelular de la expresión génica hasta la dinámica macroscópica de la población de células dentro del biorreactor., [CA] Aquesta Tesi tracta del modelat multiescala considerant l'amfitrió ce\lgem ular per a l'anàlisi i ajust de circuits genètics sintètics per a bioproducció. Els objectius principals van ser: 1. El desenvolupament d'un model de grandària reduïda que considere l'amfitrió ce\lgem ular, enfocat al seu ús en simulació i anàlisi. 2. El desenvolupament d'eines de programari per al modelatge i la simulació, orientada a la biologia sintètica. 3. La implementació d'un model multiescala que considere les escales rellevants per a la bioproducció (bioreactor, cè\lgem ula i circuit sintètic). 4. L'anàlisi del controlador antitètic considerant les interacciones cè\lgem ula-circuit, com a exemple d'aplicació de les eines desenvolupades. 5. El desenvolupament i la validació experimental de lleis de control robust per a bioreactors continus. El treball presentat en aquesta Tesi cobreix les tres escales del procés de bioproducció. La primera escala és el bioreactor: aquesta escala considera la dinàmica macroscòpica del substrat i la biomassa, i com aquestes dinàmiques es connecten amb l'estat intern de les cè\lgem ules. La segona escala és la cè\lgem ula amfitriona: aquesta escala considera la dinàmica interna de la cè\lgem ula i la competència pels recursos limitats compartits per a l'expressió de proteïnes. La tercera escala és la del circuit genètic sintètic: aquesta escala considera la dinàmica d'expressió de circuits sintètics exógens i la càrrega que indueixen en la cè\lgem ula amfitriona. Finalment, com a <<quarta>> escala, part de la Tesi s'ha dedicat a desenvolupar eines de programari per al modelatge i la simulació. Aquest document es divideix en set capítols. El Capítol 1 és una introducció general al treball de la Tesi i la seua justificació; també presenta un mapa visual de la Tesi i enumera les principals contribucions. El Capítol 2 mostra el desenvolupament del model de l'amfitrió ce\lgem ular (els Capítols 4 i 5 fan ús d'aquest model per a les seues simulacions). El Capítol 3 presenta OneModel: una eina de programari desenvolupada en la Tesi que facilita el modelatge i la simulació en biologia sintètica, en particular, facilita l'ús del model de l'amfitrió ce\lgem ular. El Capítol 4 utilitza el model de l'amfitrió ce\lgem ular per a muntar el model multiescala que considera el bioreactor i analitza el títol, la productivitat i el rendiment en l'expressió d'una proteïna exògena. El Capítol 5 analitza un circuit més complex, el recentment proposat i molt citat controlador biomolecular antitètic, utilitzant el model de l'amfitrió ce\lgem ular. El Capítol 6 mostra el disseny d'estratègies de control no lineal que permeten controlar la concentració de biomassa en un bioreactor continu de manera robusta. El Capítol 7 resumeix i presenta les principals conclusions de la Tesi. En l'Apèndix A es mostra el desenvolupament teòric del model de l'amfitrió ce\lgem ular. Aquesta Tesi destaca la importància d'estudiar la càrrega ce\lgem ular en els sistemes biològics, ja que aquests efectes són molt notables i generen interaccions entre circuits aparentment independents. La Tesi proporciona eines per a modelar, simular i dissenyar circuits genètics sintètics tenint en compte aquests efectes de càrrega i permet el desenvolupament de models que connecten aquests fenòmens en els circuits genètics sintètics, que van des de la dinàmica intrace\lgem ular de l'expressió gènica fins a la dinàmica macroscòpica de la població de cè\lgem ules dins del bioreactor., [EN] This Thesis was devoted to the multi-scale host-aware analysis and tuning of synthetic gene circuits for bioproduction. The main objectives were: 1. The development of a reduced-size host-aware model for simulation and analysis purposes. 2. The development of a software toolbox for modeling and simulation, oriented to synthetic biology. 3. The implementation of a multi-scale model that considers the scales relevant to bioproduction (bioreactor, cell, and synthetic circuit). 4. The host-aware analysis of the antithetic controller, as an example of the application of the developed tools. 5. The development and experimental validation of robust control laws for continuous bioreactors. The work presented in this Thesis covers the three scales of the bioproduction process. The first scale is the bioreactor: this scale considers the macroscopic substrate and biomass dynamics and how these dynamics connect to the internal state of the cells. The second scale is the host cell: this scale considers the internal dynamics of the cell and the competition for limited shared resources for protein expression. The third scale is the synthetic genetic circuit: this scale considers the dynamics of expressing exogenous synthetic circuits and the burden they induce on the host cell. Finally, as a <<fourth>> scale, part of the Thesis was devoted to developing software tools for modeling and simulation. This document is divided into seven chapters. Chapter 1 is an overall introduction to the Thesis work and its justification; it also presents a visual map of the Thesis and lists the main contributions. Chapter 2 shows the development of the host-aware model (Chapters 4 and 5 make use of this model for their simulations). Chapter 3 presents OneModel: a software tool developed in the Thesis that facilitates modeling and simulation for synthetic biology---in particular, it facilitates the use of the host-aware model---. Chapter 4 uses the host-aware model to assemble the multi-scale model considering the bioreactor and analyzes the titer, productivity (rate), and yield in expressing an exogenous protein. Chapter 5 analyzes a more complex circuit, the recently proposed and highly cited antithetic biomolecular controller, using the host-aware model. Chapter 6 shows the design of nonlinear control strategies that allow controlling the concentration of biomass in a continuous bioreactor in a robust way. Chapter 7 summarizes and presents the main conclusions of the Thesis. Appendix A shows the theoretical development of the host-aware model. This Thesis emphasizes the importance of studying cell burden in biological systems since these effects are very noticeable and generate interactions between seemingly unconnected circuits. The Thesis provides tools to model, simulate and design synthetic genetic circuits taking into account these burden effects and allowing the development of models that connect phenomena in synthetic genetic circuits, ranging from the intracelullar dynamics of gene expression to the macroscopic dynamics of the population of cells inside the bioreactor., This research was funded by MCIN/AEI/10.13039/501100011033 grant number PID2020-117271RB-C21, and MINECO/AEI, EU grant number DPI2017-82896- C2-1-R. The author was recipient of the grant “Programa para la Formación de Personal Investigador (FPI) de la Universitat Politècnica de València — Subprograma 1 (PAID-01-2017)”. The author was also a grantee of the predoctoral stay “Ayudas para Movilidad de Estudiantes de Doctorado de la Universitat Politècnica de València 2019”. The Control Theory and Systems Biology Lab of the ETH Zürich is acknowledged for accepting the author in their facilities as predoctoral stay and their valuable collaboration sharing knowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrating mathematical modeling into synthetic biology education: a comprehensive approach through webinars and syllabus development

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Beluzán-Flores, Francisco Javier
[EN] Mathematical modeling is a fundamental aspect of synthetic biology, enabling precise design and analysis of biological systems. To enhance students' understanding of this critical topic, we developed a series of webinars aimed at teaching mathematical modeling to iGEM teams. These webinars were initially created to maintain student engagement during a period of restricted lab access but quickly demonstrated their value as an effective educational tool. The success of these webinars highlighted the suitability of mathematical modeling as a topic well-suited to both onsite and online learning environments. Recognizing this, we expanded the content into a comprehensive syllabus for undergraduate courses in synthetic biology at the Universitat Polit & egrave;cnica de Valencia in Spain and Universidad de las Fuerzas Armadas-ESPE in Ecuador. The course now serves as a core component of synthetic biology education, offering students a robust framework for understanding and applying mathematical models. It includes a series of lectures, practical exercises, and case studies, all designed to deepen students' knowledge and skills in this essential area. To support educators and students, we have also developed a deck of slides and example scripts that provide practical examples and reinforce the concepts taught in the course. This manuscript presents the development, implementation, and impact of these educational initiatives, demonstrating how mathematical modeling can be effectively integrated into synthetic biology curricula to prepare students for real-world challenges in the field., The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This research was funded by MCIN/AEI/10.13039/501100011033 grant numbers PID2020-117271RB-C21 and PID2023-151077OB-I00. YB gives thanks to Universitat Politecnica de Valencia (Grant PAID-10-21 Acceso al Sistema Espanol de Ciencia e Innovacion), and Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion-Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLATERO: A Calibration Protocol for Plate Reader Green Fluorescence Measurements

  • González-Cebrián, Alba
  • Borràs-Ferrís, Joan
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Ferrer, Alberto|||0000-0001-7244-5947
  • Picó, Jesús|||0000-0003-4144-3521
[EN] One of the most common sources of information in Synthetic Biology is the data coming from plate reader fluorescence measurements. These experiments provide a measure of the light emitted by a certain fluorescent molecule, such as the Green Fluorescent Protein (GFP). However, these measurements are generally expressed in arbitrary units and are affected by the measurement device gain. This limits the range of measurements in a single experiment and hampers the comparison of results among experiments. In this work, we describe PLATERO, a calibration protocol to express fluorescence measures in concentration units of a reference fluorophore. The protocol removes the gain effect of the measurement device on the acquired data. In addition, the fluorescence intensity values are transformed into units of concentration using a Fluorescein calibration model. Both steps are expressed in a single mathematical expression that returns normalized, gain-independent, and comparable data, even if the acquisition was done at different device gain levels. Most important, the PLATERO embeds a Linearity and Bias Analysis that provides an assessment of the uncertainty of the model estimations, and a Reproducibility and Repeatability analysis that evaluates the sources of variability originating from the measurements and the equipment. All the functions used to build the model, exploit it with new data, and perform the uncertainty and variability assessment are available in an open access repository., This research was funded by MCIN/AEI/10.13039/501100011033 grant numbers PID2020-117271RB-C21 and PID2020-119262RB-I00, Generalitat Valenciana grants CIAICO/2021/159 and CIAICO/2021/111, and Universitat Politècnica de València grants PAID-01-17 (AG-C) and PAID10-21 (YB). YB thanks to Secretaría de Educación Superior, Ciencia, Tecnología e Innovación of Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and Optimization of a Molecular Biocontroller for the Regulation of Complex Metabolic Pathways

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Santos-Navarro, Fernando Nóbel
[EN] Achieving optimal production in microbial cell factories, robustness against changing intracellular and environmental perturbations requires the dynamic feedback regulation of the pathway of interest. Here, we consider a merging metabolic pathway motif, which appears in a wide range of metabolic engineering applications, including the production of phenylpropanoids among others. We present an approach to use a realistic model that accounts for in vivo implementation and then propose a methodology based on multiobjective optimization for the optimal tuning of the gene circuit parts composing the biomolecular controller and biosensor devices for a dynamic regulation strategy. We show how this approach can deal with the trade-offs between the performance of the regulated pathway, robustness to perturbations, and stability of the feedback loop. Using realistic models, our results suggest that the strategies for fine-tuning the trade-offs among performance, robustness, and stability in dynamic pathway regulation are complex. It is not always possible to infer them by simple inspection. This renders the use of the multiobjective optimization methodology valuable and necessary., This research was funded by MCIN/AEI/10.13039/501100011033 grant number PID 2020-117271RB-C21. YB thanks to Universitat Politècnica de València (Grant PAID-10-21 Acceso al Sistema Español de Ciencia e Innovación), and Secretaría de Educación Superior, Ciencia, Tecnología e Innovación-Ecuador (Scholarship Convocatoria Abierta 2011). FS-N is grateful to grant PAID-01-2017 from Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast biofoundries: coping with the challenges of biomanufacturing

  • Tellechea-Luzardo, Jonathan Alexander
  • Otero-Muras, Irene
  • Goñi-Moreno, Angel
  • Carbonell, Pablo|||0000-0002-0993-5625
[EN] Biofoundries are highly automated facilities that enable the rapid and efficient design, build, test, and learn cycle of biomanufacturing and engineering biology, which is applicable to both research and industrial production. However, developing a biofoundry platform can be expensive and time consuming. A biofoundry should grow organically, starting from a basic platform but with a vision for automation, equipment interoperability, and efficiency. By thinking about strategies early in the process through process planning, simulation, and optimization, bottlenecks can be identified and resolved. Here, we provide a survey of technological solutions in biofoundries and their advantages and limitations. We explore possible pathways towards the creation of a functional, early-phase biofoundry, and strategies towards long-term sustainability., The authors thank Dr Rosalind Le Feuvre, Manchester SYNBIOCHEMCentre, for providing insightful discussions. J.T.-L. was supported by the Next Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). I.O.-M. was supported by CSIC intramural project PIE 20211CT006. A.G.-M. was supported by the grants BioSinT-CM (Y2020/TCS-6555) and CONTEXT (Atraccion de Talento Program; 2019-T1/BIO-14053) Projects of the Comunidad de Madrid, MULTI-SYSBIO (PID2020-117205GA-I00), and the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2016-0672) (2017-2021) from MCIN/Agencia Estatal de Investigacion of Spain. P.C. was supported by MCIN/AEI/10.13039/501100011033 BIODYNAMICS grant number PID2020-117271RB-C21, and Universitat Politecnica de Valencia Talento Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

RBS and Promoter Strengths Determine the Cell-Growth-Dependent Protein Mass Fractions and Their Optimal Synthesis Rates

  • Santos-Navarro, Fernando Nóbel
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Models of gene expression considering host-circuit interactions are relevant for understanding both the strategies and associated trade-offs that cell endogenous genes have evolved and for the efficient design of heterologous protein expression systems and synthetic genetic circuits. Here, we consider a small-size model of gene expression dynamics in bacterial cells accounting for host-circuit interactions due to limited cellular resources. We define the cellular resources recruitment strength as a key functional coefficient that explains the distribution of resources among the host and the genes of interest and the relationship between the usage of resources and cell growth. This functional coefficient explicitly takes into account lab-accessible gene expression characteristics, such as promoter and ribosome binding site (RBS) strengths, capturing their interplay with the growth-dependent flux of available free cell resources. Despite its simplicity, the model captures the differential role of promoter and RBS strengths in the distribution of protein mass fractions as a function of growth rate and the optimal protein synthesis rate with remarkable fit to the experimental data from the literature for Escherichia coli. This allows us to explain why endogenous genes have evolved different strategies in the expression space and also makes the model suitable for model-based design of exogenous synthetic gene expression systems with desired characteristics., This work was partially supported by grants MINECO/AEI, EU DPI2017-82896-C2-1-R, and MCIN/AEI/10.13039/501100011033 grant number PID2020-117271RB-C21. F.N.S.-N. is grateful to grant PAID-01-2017 (Universitat Politecnica de Valencia). The authors are very grateful to the anonymous reviewers for their comprehensive and in-depth reviews.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Standard Calibration and On-Line Estimation of Cell-Specific Growth and Protein Synthesis Rates in Chi.Bio Mini-Bioreactors

  • Harold José|||0009-0001-3142-7635
  • Arboleda-García, Mario Andrés
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Low-cost mini-bioreactor platforms are becoming increasingly important in synthetic biology and biotechnology for the characterization of genetic constructs and their initial scaling-up to large-scale cultures. Key process variables are the specific growth rate of cells and the synthesis rate of reporter proteins associated with transcriptional units of interest. These variables are of paramount importance for the characterization of gene synthetic circuits. In addition, their on-line estimation can be used for real-time monitoring of cells' metabolic state and gene circuit dynamic performance, thus allowing for on-line decision taking. In this work, we first describe a procedure for the calibration of absorbance and fluorescence measurements, ensuring standardized and comparable units across different experimental setups and measurement devices. Then, we implement an observer-based software sensor that uses the calibrated on-line measurements to simultaneously estimate the specific growth and protein synthesis rates. We implemented the calibration procedure and software sensor in a Chi.Bio mini-bioreactor platform. The experimental results show very good performance and pave the way for the use of mini-bioreactor platforms in the real-time characterization of gene synthetic circuits under dynamically regulated time-varying complex scenarios., This research was funded by MCIN/AEI/10.13039/501100011033 Grants Number PID2020-117271RB-C21 and PID2023-151077OB-I00. H.D.I. holds a "Contrato predoctoral para la formacion de doctores, convocatoria 2021" (PRE2021-098767) from Agencia Estatal de Investigacion. A.A. thanks the Universitat Politecnica de Valencia for their support through Grant PAID-01-21 (Subprogram 1). Y.B. was funded by Grant PAID-10-21 Acceso al Sistema Espanol de Ciencia e Innovacion and Grant AYUDA PAID-06-24 (20250092) from Universitat Politecnica de Valencia. Y.B. also thanks to Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion of Ecuador (Scholarship Convocatoria Abierta 2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthetic biology design principles enable efficient bioproduction of Heparosan with low molecular weight and low polydispersion index for the biomedical industry

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Flores, Marcelo
  • Stiebritz, Martin
  • Córdova, Marco
  • Flores, Francisco
[EN] Heparosan is a natural polymer with unique chemical and biological properties, that holds great promise for biomedical applications. The molecular weight (Mw) and polydispersion index (PDI) are critical factors influencing the performance of heparosan-based materials. Achieving precise control over the synthesis process to consistently produce heparosan with low Mw and low PDI can be challenging, as it requires tight regulation of reaction conditions, enzyme activity, and precursor concentrations. We propose a novel approach utilizing synthetic biology principles to precisely control heparosan biosynthesis in bacteria. Our strategy involves designing a biomolecular controller that can regulate the expression of genes involved in heparosan biosynthesis. This controller is activated by biosensors that detect heparosan precursors, allowing for fine-tuned control of the polymerization process. Through this approach, we foresee the implementation of this synthetic device, demonstrating the potential to produce low Mw and low PDI heparosan in the probiotic E. coli Nissle 1917 as a biosafe and biosecure biofactory. This study represents a significant advancement in the field of heparosan production, offering new opportunities for the development and manufacturing of biomaterials with tailored properties for diverse biomedical applications., This work was partially supported by the following funding sources: MCIN/AEI/10.13039/501100011033 project numbers PID2023-151077OB-I00, PID2020-117271RB-C21 and AYUDA PAID06-24 (20250092) from Universitat Politècnica de Valéncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gene Expression Space Shapes the Bioprocess Trade-Offs among Titer, Yield and Productivity

  • Santos-Navarro, Fernando Nóbel
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Optimal gene expression is central for the development of both bacterial expression systems for heterologous protein production, and microbial cell factories for industrial metabolite production. Our goal is to fulfill industry-level overproduction demands optimally, as measured by the following key performance metrics: titer, productivity rate, and yield (TRY). Here we use a multiscale model incorporating the dynamics of (i) the cell population in the bioreactor, (ii) the substrate uptake and (iii) the interaction between the cell host and expression of the protein of interest. Our model predicts cell growth rate and cell mass distribution between enzymes of interest and host enzymes as a function of substrate uptake and the following main lab-accessible gene expression-related characteristics: promoter strength, gene copy number and ribosome binding site strength. We evaluated the differential roles of gene transcription and translation in shaping TRY trade-offs for a wide range of expression levels and the sensitivity of the TRY space to variations in substrate availability. Our results show that, at low expression levels, gene transcription mainly defined TRY, and gene translation had a limited effect; whereas, at high expression levels, TRY depended on the product of both, in agreement with experiments in the literature., This research was partially supported by grants MINECO/AEI, EU DPI2017-82896-C21-R 662 and MICINN/AEI, EU PID2020-117271RB-C21. F.N.S.-N. thanks the UPV grant number PAID-01-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advancements in synthetic biology-based bacterial cancer therapy: A modular design approach

  • Arboleda-García, Mario Andrés|||0000-0001-9647-9949
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Jantus-Lewintre, Eloisa|||0000-0001-7395-4380
  • Alarcon-Ruiz, Ivan
  • Boada-Acosta, Lissette
[EN] Synthetic biology aims to program living bacteria cells with artificial genetic circuits for user-defined functions, transforming them into powerful tools with numerous applications in various fields, including oncology. Cancer treatments have serious side effects on patients due to the systemic action of the drugs involved. To address this, new systems that provide localized antitumoral action while minimizing damage to healthy tissues are required. Bacteria, often considered pathogenic agents, have been used as cancer treatments since the early 20th century. Advances in genetic engineering, synthetic biology, microbiology, and oncology have improved bacterial therapies, making them safer and more effective. Here we propose six modules for a successful synthetic biology-based bacterial cancer therapy, the modules include Payload, Release, Tumor-targeting, Biocontainment, Memory, and Genetic Circuit Stability Module. These will ensure antitumor activity, safety for the environment and patient, prevent bacterial colonization, maintain cell stability, and prevent loss or defunctionalization of the genetic circuit., This research was funded by MCIN/AEI/10.13039/501100011033 Grant numbers PID2020-117271RB-C21 and TED2021-131049B-I00, Generalitat Valenciana GVA Grant CIAICO/2021/159, Centro de Investigacion Biomedica en Red de Cancer (CIBERONC) Grant CB16-12-00350, Instituto de Salud Carlos III (Grant PI22/01221) , and GVA Grant AICO/2021/333.A Arboleda-Garcia thanks the Grant PAID-01-21 Programa de Ayudas de Investigacion y Desarrollo from Universitat Politecnica de Valencia, Spain. I Alarcon-Ruiz thanks the FPU grant (FPU20/04814) from the Spanish Government. L Boada-Acosta thanks the Grant Santiago Grisolia GRISOLIAP/2021/030 from Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital and Generalitat Valenciana, Spain. Y Boada is thankful for the Grant PAID-10-21 Acceso al Sistema Espanol de Ciencia e Innovacion from Universitat Politecnica de Valencia, Spain; and the Scholarship Convocatoria Abierta 2011 from Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion, Ecuador. The authors are grateful to Prof. Jesus Pico for his guidance during the preparation of this manuscript. Bio Render was used to illustrate the figures under a paid license for publication authorization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast biofoundries: coping with the challenges of biomanufacturing

  • Tellechea-Luzardo, Jonathan
  • Otero-Muras, Irene
  • Goñi-Moreno, Ángel
  • Carbonell-Bejerano, Pablo
Biofoundries are highly automated facilities that enable the rapid and efficient design, build, test, and learn cycle of biomanufacturing and engineering biology, which is applicable to both research and industrial production. However, developing a biofoundry platform can be expensive and time consuming. A biofoundry should grow organically, starting from a basic platform but with a vision for automation, equipment interoperability, and efficiency. By thinking about strategies early in the process through process planning, simulation, and optimization, bottlenecks can be identified and resolved. Here, we provide a survey of technological solutions in biofoundries and their advantages and limitations. We explore possible pathways towards the creation of a functional, early-phase biofoundry, and strategies towards long-term sustainability., The authors thank Dr Rosalind Le Feuvre, Manchester SYNBIOCHEM Centre, for providing insightful discussions. J.T.-L. was supported by the Next Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). I.O.-M. was supported by CSIC intramural project PIE 20211CT006. A.G.-M. was supported by the grants BioSinT-CM (Y2020/TCS-6555) and CONTEXT (Atracción de Talento Program; 2019-T1/BIO-14053) Projects of the Comunidad de Madrid, MULTI-SYSBIO (PID2020-117205GA-I00), and the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2016-0672) (2017–2021) from Ministe. P.C. was supported by MCIN/AEI/10.13039/501100011033 BIODYNAMICS grant number PID2020-117271RB-C21, and Universitat Politécnica de València Talento Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sensbio: an online server for biosensor design

  • Tellechea-Luzardo, Jonathan
  • Martín Lázaro, Hèctor
  • Moreno López, Raúl
  • Carbonell, Pablo
Allosteric transcription factor (aTF) based biosensors can be used to engineer genetic circuits for a wide range of applications. The literature and online databases contain hundreds of experimentally validated molecule-TF pairs; however, the knowledge is scattered and often incomplete. Additionally, compared to the number of compounds that can be produced in living systems, those with known associated TF-compound interactions are low. For these reasons, new tools that help researchers find new possible TF-ligand pairs are called for. In this work, we present Sensbio, a computational tool that through similarity comparison against a TF-ligand reference database, is able to identify putative transcription factors that can be activated by a given input molecule. In addition to the collection of algorithms, an online application has also been developed, together with a predictive model created to find new possible matches based on machine learning., JTL was supported by European Union MSCA (Grant agreement ID: 101062593). RML was supported by an AI2-UPV studentship. JTL and PC were supported by the Next Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan (UNI/551/2021). PC acknowledges MCIN/AEI/https://doi.org/10.13039/501100011033 funding through PID2020-117271RB-C2 (BIODYNAMICS). PC was supported by the Spanish Ministry of Universities (UNI/551/2021), grant number UP2021-036 funded by European Union—Next generation EU. PC and HML acknowledge funding from Generalitat Valenciana through grant CIAICO/2021/159 (SmartBioFab). PC acknowledges MCIN/AEI /https://doi.org/10.13039/501100011033 and NextGenerationEU/ PRTR funding through grant TED2021-131049B-I00 (BioEcoDBTL). PC acknowledges MCIN/AEI/https://doi.org/10.13039/501100011033 funding through grant PID2021-127888NA-I00 (COMPSYNBIO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transcription factor-based biosensors for screening and dynamic regulation

  • Tellechea-Luzardo, Jonathan
  • Stiebritz, Martin T.
  • Carbonell, Pablo
Advances in synthetic biology and genetic engineering are bringing into the spotlight a wide range of bio-based applications that demand better sensing and control of biological behaviours. Transcription factor (TF)-based biosensors are promising tools that can be used to detect several types of chemical compounds and elicit a response according to the desired application. However, the wider use of this type of device is still hindered by several challenges, which can be addressed by increasing the current metabolite-activated transcription factor knowledge base, developing better methods to identify new transcription factors, and improving the overall workflow for the design of novel biosensor circuits. These improvements are particularly important in the bioproduction field, where researchers need better biosensor-based approaches for screening production-strains and precise dynamic regulation strategies. In this work, we summarize what is currently known about transcription factor-based biosensors, discuss recent experimental and computational approaches targeted at their modification and improvement, and suggest possible future research directions based on two applications: bioproduction screening and dynamic regulation of genetic circuits., JT-L was supported by European Union Marie Skłodowska-Curie Action Individual Postdoctoral Fellowship (Grant agreement ID: 101062593). JT-L was supported by the Next-Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). MS was supported by the Next-Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a María Zambrano personal grant from the Spanish Ministry of Universities (UNI/551/2021). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through PID 2020-117271RB-C2 (BIODYNAMICS). PC was supported by the Spanish Ministry of Universities (UNI/551/2021), grant number UP 2021-036 funded by European Union - Next-generation EU. This research received financial support from Generalitat Valenciana through grant CIAICO/2021/159 (SmartBioFab). PC acknowledges MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR funding through grant TED 2021-131049 B-I00 (BioEcoDBTL). PC acknowledges MCIN/AEI/10.13039/501100011033 funding through grant PID 2021-127888NA-I00 (COMPSYNBIO)., Peer reviewed