Skip to main content

CARACTERIZACION FISICO-QUIMICA DE LAS PROPIEDADES ACIDO-BASE DE LA MATERIA ORGANICA DISUELTA DESDE EL SUELO HASTA EL OCENAO

PID2020-117910GB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Sustainable Low-Cost Phosphorus Recovery Using Nanostructured Materials with Reusability Potential

  • Gómez-Carnota, David
  • Barriada, José Luis
  • Rodríguez-Barro, Pilar
  • Sastre de Vicente, Manuel
  • Herrero, Roberto
This article belongs to the Topic Advances in Chemistry, XXVIth International Galician Portuguese Conference on Chemistry, [Abstract] A new low-cost material with a polymeric base formed from sodium silicate was developed. The material presents a nanostructured, highly rich iron surface with a large phosphorus retention capacity and potential reuse as a crop fertilizer. In the present study, we demonstrate that iron is the element that acts as an adsorbent for phosphate, while the polymeric base functions exclusively as a support for iron. The iron is uniformly adsorbed on the surface of the material, forming nanostructures, which ensure that iron works similarly to nanoparticles in solution but avoid other problems, such as particle agglomeration or the difficulty of separating them after the removal process. Materials were characterised by SEM, EDS, N2 sorption, and image processing, and the effect of pH, ionic strength, and temperature was studied. Sorption kinetics were analysed using Boyd’s diffusion model, and adsorption equilibria were studied using several adsorption models. A maximum iron adsorption on the polymeric base of 23.9 ± 0.3 mg Fe∙g−1 was found, while maximum phosphorus adsorption was 366 ± 21 mg P∙g−1 Fe. Thus, phosphorus is recovered from the aqueous medium with an inexpensive material that has the potential to be used directly as a fertilizer., This research was funded by Agencia Estatal de Investigación (AEI) (Ministerio de Ciencia e Innovación) through research project PID2020-117910GB-C22 and by Xunta de Galicia through project ED431B 2022/40, Xunta de Galicia; ED431B 2022/40
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Green Development of Iron Doped Silica Gel Materials for Chromium Decontamination

  • Gómez-Carnota, David
  • Barriada, José Luis
  • Herrero, Roberto
[Abstract] New hybrid polymeric materials were prepared by the polymerisation of sodium silicate, water, and hydrochloric acid, with the subsequent addition of iron. After the treatment with a natural reducing biomass extract, the resulting material was used in Cr(VI) decontamination processes. The preparation of the materials started with the synthesis of the polymeric base, and the successive modifications were made to maximise Cr(VI) removal. Characterization studies were carried out by SEM and EDS tests for each of the synthesised materials. The synthesised polymeric base (called GSP) was found to have a high affinity for Fe(II). An adsorption of 24.5 mg Fe(II)·g˗1 on GSP was achieved, with an associated adsorption energy of 34.5 kJ·mol˗1. In the decontamination studies, the polymeric base acts as a Supporting material for iron, while the main Cr(VI) scavenger is the adsorbed Fe. Chromium removal takes place by a combined process of Cr(VI) reduction to Cr(III) and adsorption of both chromium species at acidic pH. An adsorption model, based on statistical thermodynamics, and removal rates were used to study the process. The proposed material is sustainable, cheap and has high capacity to remove chromium from aqueous media quickly and effectively., Authors wish to thank Agencia Estatal de Investigación (AEI) (Ministerios de Ciencia e Innovación y de Economía y Competitividad) for the financial support through the research projects PID2020–117910 GB-C22 and CTQ2016–80473-P cofounded with FEDER (UE) programme. Gómez-Carnota thanks Fundación Segundo Gil Dávila for the fellowship grant
RUC. Repositorio da Universidade da Coruña
Publication Tesis doctoral (DoctoralThesis)

Circular Economy on Hybrid Materials: Design for Pollution Prevention, Application and Functional Reuse

  • Gómez-Carnota, David
[Abstract] In this study, several materials were developed using low-cost components such as silicates and aquaculture residues, including algal biomass. The aim was to evaluate the effectiveness of the materials both for water decontamination and for their potential reuse. The systems were designed following a circular economy approach, revalorising low-cost by-products through sustainable synthesis processes. In the first line of research, materials based on polymerised silica impregnated with zero-valent iron (Fe0) were synthesised. These were capable of efficiently removing hexavalent chromium (Cr(VI)).The materials exhibited structural stability across a wide range of pH, temperature and salinity conditions. Furthermore, the possibility of regenerating the materials through desorption and re-functionalisation with iron and plant extracts was validated, allowing their reuse without significant loss of efficiency. In the second line of work, the material composed of silica gel and iron was used to capture phosphorus in the form of phosphate ions, with the same structural stability as observed in the Cr(VI) studies., [Resumen] En este trabajo se han desarrollado diferentes materiales a partir de elementos de bajo coste como silicatos o residuos de acuicultura como la biomasa de algas. Como objetivo se estableció evaluar la eficacia de los materiales desarrollados tanto en la descontaminación de aguas, como su potencial reaprovechamiento. Los sistemas diseñados responden a un enfoque de economía circular, revalorizando subproductos de bajo coste mediante procesos de síntesis sostenibles. En una primera línea de investigación, se sintetizaron materiales basados en sílice polimerizada impregnada con hierro cero valente (Fe0), capaces de eliminar eficientemente cromo hexavalente (Cr(VI)). Los materiales mostraron elevadas capacidades de adsorción, así como estabilidad estructural en amplios rangos de pH, temperatura y salinidad. Adicionalmente, se validó la posibilidad de regenerar los materiales mediante tratamientos de desorción y re-funcionalización con Fe y con extractos vegetales, permitiendo su reutilización sin pérdidas significativas de eficacia. En una segunda línea, el material desarrollado a partir de gel de sílice y Fe se empleó para la captación de fósforo en forma de iones fosfato, con la misma estabilidad estructural que en los estudios de Cr(VI)., [Resumo] Neste traballo desenvolvéronse diferentes materiais a partir de elementos de baixo custo como silicatos ou residuos da acuicultura, como a biomasa de algas. Como obxectivo estableceuse avaliar a eficacia dos materiais desenvolvidos tanto na descontaminación de augas como no seu potencial reaproveitamento. Os sistemas deseñados responden a un enfoque de economía circular, revalorizando subprodutos de baixo custo mediante procesos de síntese sostibles. Nunha primeira liña de investigación, sintetizáronse materiais baseados en sílice polimerizada impregnada con ferro en estado cero valente (Fe0), capaces de eliminar eficientemente cromo hexavalente (Cr(VI)). Os materiais amosaron elevadas capacidades de adsorción, así como estabilidade estrutural en amplos rangos de pH, temperatura e salinidade. Ademais, validouse a posibilidade de rexenerar os materiais mediante tratamentos de desorción e re-funcionalización con Fe e con extractos vexetais, permitindo a súa reutilización sen perdas significativas de eficacia. Nunha segunda liña, o material desenvolvido a partir de xel de sílice e Fe empregouse para a captación de fósforo en forma de ións fosfato, mantendo a mesma estabilidade estrutural que nos estudos con Cr(VI)., Quixera agradecer tanto á Fundación Segundo Gil Dávila como ao Ministerio de Ciencia, Innovación e Universidades pola financiación durante a etapa predoutoral, primeiro a través dunha bolsa para continuación de estudos de Química, e despois grazas a un contrato predoutoral FPU 21. Tamén á Axencia Estatal de investigación e ó Ministerio de Ciencia e Innovación polo financiamento a través do proxecto PID2020-117910GB-C22, e á Xunta de Galicia a través do GPC ED431B 2022/40., Xunta de Galicia; ED431B 2022/40
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Towards the Development of Sustainable Hybrid Materials to Achieve High Cr(VI) Removals in a One-Pot Process

  • Gómez-Carnota, David
  • Barriada, José Luis
  • Herrero, Roberto
This article belongs to the Special Issue Nano-Adsorbents for the Removal of Heavy Metals and Dyes, [Abstract] Rising manufacturing costs resulting from the current global situation make it necessary to economize at all stages of production, including waste management. Cost-effective materials that reduce the release of pollutants into the environment are becoming mandatory. In this work, a sodium silicate polymeric material, functionalized with iron, was synthesized. The material contains iron-rich nanostructures on the surface, which are responsible for the decontamination process. The inorganic material was further treated with a reducing eucalyptus extract to improve its decontamination performance. Both the inorganic and hybrid materials were used for decontamination of Cr(VI), a widely emitted chemical waste product. The hybrid material provided the best results (1.7 g Cr(VI)·g−1 Fe) in a one-pot process combining reduction and adsorption. The Langmuir–Freundlich model and a statistical thermodynamics adsorption model, together with removal rates, were used to study the processes. High adsorption energies were found, especially in the adsorption of Fe(II) on the polymeric base (33.2 kJ∙mol−1). All materials were characterized using SEM, EDS and N2 sorption, TGA, and IR analyses. In conclusion, the hybrid material synthesized in this study is cheap and easy to produce through environmentally friendly synthesis, and it is a promising adsorbent for the prevention of pollution issues in effluent discharges., This research was funded by Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, through the research project PID2020-117910GB-C22 and by Xunta de Galicia through the project ED431B 2022/40, Xunta de Galicia; ED431B 2022/40