Skip to main content

SPECIALTY FIBERS EXPLOITING SPATIAL MULTIPLEXING FOR SIGNAL PROCESSING, SENSING AND BEYOND

PID2020-118310RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of Fiber Bragg Grating Sensors for Monitoring Shaft Vibrations of Hydraulic Turbines

  • Sánchez-Botello, Xavier
  • Roig, Rafael
  • De La Torre, Oscar
  • Escaler, Xavier
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The structural dynamic response of hydraulic turbines needs to be continuously monitored to predict incipient failures and avoid catastrophic breakdowns. Current methods based on traditional off-board vibration sensors mounted on fixed components do not permit inferring loads induced on rotating parts with enough accuracy. Therefore, the present paper assesses the performance of fiber Bragg grating sensors to measure the vibrations induced on a rotating shaft¿disc assembly partially submerged in water resembling a hydraulic turbine rotor. An innovative mounting procedure for installing the sensors is developed and tested, which consists of machining a thin groove along a shaft line to embed a fiber-optic array that can pass through the bearings. At the top of the shaft, a rotary joint is used to extract, in real time, the signals to the interrogator. The shaft strain distribution is measured with high spatial resolution at different rotating speeds in air and water. From this, the natural frequencies, damping ratios, and their associated mode shapes are quantified at different operating conditions. Additionally, the change induced in the modes of vibration by the rotation effects is well captured. All in all, these results validate the suitability of this new fiber-optic technology for such applications and its overall better performance in terms of sensitivity and spatial resolution relative to traditional equipment. The next steps will consist of testing this new sensing technology in actual full-scale hydraulic turbines., This work was supported by the funding received from the European Union s Horizon H2020 research and innovation program (grant agreement no: 814958) and by the I+D+i project SYNERGY PID2020-118310RBI00 funded by the MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reconfigurable Few-Mode Fiber-Based Microwave Photonic Filter

  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We experimentally demonstrate, for the first-time to our knowledge, tunable true-time delay line operation over a few-mode fiber link, in which the time delay can be continuously and widely tuned, from 46.3 to 105.6 ps, by simply sweeping the operating optical wavelength over the 35-nm range of the C-band. This has become possible thanks to the particular modal dispersion properties of the developed double-clad step-index few-mode fiber, as it features relatively evenly-spaced incremental chromatic dispersion values among 5 spatial modes. To date, it is the first time a dispersion-diversity FMF with this property has been experimentally reported. We assess the performance of this true-time delay line when applied to microwave signal filtering in both space and wavelength diversities, where a variety of reconfigurable 5, 7 and 10-tap microwave filters with free spectral ranges ranging from 7.7 to 27.1 GHz are experimentally demonstrated., This work was supported in part by ERC Consolidator under Grant 724663, in part by the Spanish Ministerio de Ciencia e Innovacion under Grant PID2020-118310RB-100, and in part by the Advanced Instrumentation for World ClassMicrowave Photonics Research under Grant IDIFEDER/2018/031
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ambiguity-Free, Multiparametric, and Multipoint Fiber Refractometer Based on the Hilbert Transform

  • Esquivel-Hernández, Jonathan
  • Martínez-Manuel, Rodolfo
  • Valentín-Coronado, Luis M.
  • García-Miquel, Héctor
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Hilbert transform (HT) is implemented to create an unambiguous, multiparametric, and multipoint fiber refractometer in a simple and practical way. The ambiguity effect in the fiber refractometer commonly occurs between liquid samples having refractive index (RI) values below and above the RI of the fundamental mode of the fiber. Here, the phase of the signal of the fiber refractometer obtained with the help of the HT is used to remove the ambiguity issue. The sensing head is a Fabry-Perot cavity formed between a fiber Bragg grating (FBG) and the fiber tip. The amplitude of the envelope obtained by the HT is used for RI monitoring, and the phase of the HT signal is used for temperature measurement. FBGs of different wavelengths permit the multipoint characteristic, whereas the HT allows to obtain all the results from a single scan in a simple and practical way. In addition, improvement in the signal visibility is experimentally demonstrated by comparing different reflectivity of FBGs in the sensing cavities., Jonathan Esquivel-Hernandez acknowledges the Consejo Nacional de Humanidades, Ciencia y Tecnolog¿ıa (CONAHCyT), Mexico, for the support provided through the Postgraduate Scholarship under Grant 808451.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Weight Measurement and Vibration Detection Sensor Based on a Thermoplastic Polyurethane Optical Fiber

  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Llera, Miguel
  • Flahaut, Frédéric
  • Benoit, Justin
[EN] An elastomeric optical fiber core was fabricated by drawing a 1160-D thermoplastic polyurethane preform. The cut-back technique was used to measure fiber attenuation for a light spectrum ranging from 550 nm to 875 nm, resulting in an average value of less than 0.25 dB/cm, which is suitable for use in short-distance applications. The potential of the fiber was evaluated in two applications where the advantages of this type of optical fiber, its elasticity and flexibility, are important. In the first application, for weight measurement, the sensor response showed asymptotic behavior at high weights that can be divided into two linear sections of 2.9 dB/N for weights ranging from 0 N up to 1 N, and 2.1 dB/N for 1 N to 1.7 N. In the second application, as a vibration sensor, signals were detected between 1 kHz and 20 kHz with an amplitude of approximately 35 dB above the background noise., The work of Daniel G. Maldonado-Hurtado was supported in part by MCIN/AEI/10.13039/ 501100011033 through a scholarship PRE2018-085654, and in part by ESF Investing in your future. This work was supported in part by the MCIN/AEI/10.13039/501100011033 through I+D+I Project SYNERGY PID2020-118310RB-I00 and INSTILL PID2020-120071RJ-I00, and in part by the Generalitat Valenciana through PROMETEO 2021/015 Research Excellency Award, IDIFEDER/2020/032, and IDIFED-ER/2021/050 GVA Infraestructura.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical and experimental analysis of inter-core crosstalk in strongly-coupled multicore fiber tapers

  • Hernández-Ambato, Valeria Katherine
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present a comprehensive theoretical model based on the coupled-mode theory, capable of analyzing the crosstalk in a multicore optical fiber taper. The novelty of our developed model lies in its ability to describe the mode coupling in strongly-coupled multicore fiber tapers, a feature not covered by previously reported models that are only suitable for weakly-coupled multicore fibers. In our approach, we consider all possible coupling interactions among both adjacent and nonadjacent cores, along with the self-coupling within each core of a homogeneous seven-core optical fiber. Moreover, we also take into account that when a homogeneous multicore fiber undergoes tapering, a propagation constant mismatch appears between the central and external cores, due to the closer proximity of the external cores to the surrounding environment. To validate our model, we implemented fiber tapers of different waist lengths and diameters in a seven-core optical fiber and compared their inter-core crosstalk with the simulated results. Unlike previous studies that only injected light into the central core, we also explored the case where the input is launched into any external core of the fiber tapers. For both scenarios, we verified that our theoretical model can describe the dynamics of mode coupling occurring in a tapered multicore fiber for a large range of waist diameters. We believe that the findings from this study could be useful for designing sensing and signal-processing devices., This research was partially supported by MCIN/AEI/10.13039/501100011033 (under I+D+i projects INSTILL PID2020-120071RJ-I00, SYNERGY PID2020-118310RB-I00, INNOFIBER PID2023-152314OBI00 and NEXTPAM TED2021-131148B-I00). Valeria HernandezAmbato was supported by Generalitat Valenciana (under grant GRISOLIAP/2020/083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave fractional Hilbert transformer implemented in a dispersion-tailored few-mode fiber

  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We experimentally demonstrate, for the first time to our knowledge, a microwave fractional Hilbert transformer in a few-mode fiber using a transversal filtering approach. The filter taps are provided by a tunable true-time delay line that is realized by exploiting the spatial dimension of a dispersion-engineered double-clad step-index few-mode fiber. Both the fractional order and operational bandwidth of the fractional Hilbert transformer can be continuously tuned by adjusting the tap coefficients and varying the operational optical wavelength, respectively. The magnitude and phase response for different fractional orders, ranging from 0.17 to 1.00 that correspond to phase shifts of 15° to 90°, are measured. Operational bandwidths of 7.4 to 10.6 GHz are demonstrated for a classical Hilbert transformer. Real-time temporal fractional Hilbert transform of a Gaussian-like pulse is also performed. Our results are in good agreement with theory, validating the viability of our approach for implementation of microwave fractional Hilbert transformers., Generalitat Valenciana (IDIFEDER/2018/031, PROMETEO/2021/15); Ministerio de Ciencia e Innovación (PID2020-118310RB-100); European Research Council (724663).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Taper Waist Diameter on the Sensitivity of Multicore Fiber Coupler-Based Temperature and Strain Sensors

  • Hernández-Ambato, Valeria Katherine
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Moreno, Hugo
[EN] This paper analyses the effect of the waist diameter on the sensitivity of different sensors based on non-adiabatic multicore fiber couplers. The sensors have been evaluated for high-temperature and strain measurements. A homogeneous 7-core multicore fiber has been used to fabricate three different coupler sensors based on the tapering technique, using a special CO2 laser splicer. The waist length for all cases is 60 mm, while the studied waist diameters are 20 mu m, 40 mu m, and 60 mu m. We report that the central core exhibits sensitivities of 62.1 pm/degrees C and -5.2 pm/mu epsilon for temperature and strain, respectively. The evaluated high-temperature range is from 100 degrees C to 600 degrees C, and the strain range is from 0 mu epsilon to 3333 mu epsilon. Based on our findings regarding the evaluated waist diameters, we observed that the multicore fiber coupler with a waist diameter of 20 mu m exhibits a large sensitivity to strain variations. Conversely, the sensor with a waist diameter of 60 mu m demonstrates better sensitivity for temperature measurements. Additionally, we have used fan-in/fan-out optical devices to enable individual access to each core. This allowed us to extend our study and conduct sensitivity analysis in the outer cores., This work was supported in part by MCIN/AEI/10.13039/501100011033 through I+D+i Projects under Grant SYNERGY PID2020-118310RB-I00 and Grant INSTILL PID2020-120071RJ-I00 and in part by Generalitat Valenciana under Grant PROMETEO 2021/015 Research Excellency Award, Grant IDIFEDER/2020/032, and Grant IDIFEDER/2021/050 GVA Infraestructura. The work of Valeria Hernández-Ambato was supported by Generalitat Valenciana under Grant GRISOLIAP/2020/083.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coupled-core fiber Bragg gratings for low-cost sensing

  • Flores-Bravo, Jose A.
  • Zubia, Joseba
  • Villatoro, Joel
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Sensors based on Bragg gratings inscribed in conventional single mode fibers are expensive due to the need of a sophisticated, but low-speed, interrogation system. As an alternative to overcome this issue, in this work, it is proposed and demonstrated the use of coupled-core optical fiber Bragg gratings. It was found that the relative reflectivity from such gratings changed when the coupled-core fiber was subjected to point or periodic bending. This feature makes the interrogation of such gratings simple, fast, and cost-effective. The reflectivity changes of the gratings are attributed to the properties of the supermodes supported by the coupled-core fiber. As potential applications of the referred gratings, intensity-modulated vector bending and vibration sensing are demonstrated. We believe that the results reported here can pave the way to the development of many inexpensive sensors. Besides, coupled-core fiber Bragg gratings may expand the use of grating technology in other areas., This work is part of the Projects No. PGC2018-101997-B-I00 and RTI2018-094669-B-C31 funded by the MCIN/AEI/10.13039/501100011033/and FEDER, Una manera de hacer Europa; and the scholarship PAID-01-18 Granted by the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heterogeneous multicore fiber-based microwave frequency measurement

  • Nazemosadat, Elham|||0000-0003-1740-9737
  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] A novel microwave frequency measurement scheme using a heterogeneous multicore fiber (MCF) is experimentally demonstrated. The inherently different relative group delays among the cores of a heterogeneous 7-core MCF are used to realize two individual 2-tap microwave filters with different free spectral ranges (FSRs). The ratio of the frequency response traces of these two filters is used to establish an amplitude comparison function (ACF). Furthermore, by varying the operational wavelength, the relative group delays between the cores and consequently the FSRs of the filters are tuned and different ACF curves are obtained. The complementary information provided by these different ACFs allows us to estimate the unknown frequency with an improved accuracy, over a broad measurement range. In our experiments, a measurement error of +/- 71 MHz is achieved over a frequency range of 0.5-40 GHz. The proposed scheme offers flexibility and compactness, thanks to the parallelism provided by the MCF., European Research Council (Consolidator Grant Project 724663); Advanced Instrumentation forWorld Class Microwave Photonics Research (IDIFEDER/2018/031); Ministerio de Ciencia e Innovacion (PID2020-118310RB-100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Customized femtosecond laser-inscribed superstructure fiber Bragg grating: A novel approach to decoupling temperature and strain.

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Sánchez, Luis A.
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure fiber Bragg grating (SFBG). This SFBG enables improved spectral capabilities, resulting in side-resonances within the optical spectrum. The characteristics of the device depend on three key factors: the length of the SFBG, the inscribed FBG¿s periodic perturbations, and the length of the uninscribed sections that compose the entire structure. Initially, mathematical expressions were derived to calculate the separation between the central peak and a resonance on each side, which plays a crucial role in determining the sensor¿s response. Then, a series of complete simulations using OptiGrating software, and a theoretical analysis were performed to comprehend the functioning of this superstructure. Subsequently, the fabrication process employed a femtosecond laser following a point-by-point inscription. Finally obtaining a comprehensive study on the principle, design, simulation, and implementation of the proposed SFBG. The sensitivities of the central Bragg wavelength and the distance between central peak and first-order resonance when applying temperature and strain were calibrated. The results yielded sensitivities for the central Bragg peak of 10.58 pm/°C and 1.1598 pm/µ¿, while the peak-to-resonance distance had sensitivities of 0.3495 pm/°C and 0.03052 pm/µ¿. The different response of both magnitudes makes it possible to distinguish the contributions of strain and temperature within short distances, having the possibility to improve measurements in sensing applications. This study finally provides a critical insight into the design process, as it aligns with the theoretical expectations., This work is partially supported by the I + D + I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020-120071RJ-I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, Spain, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID -10-22 de la Universitat Politecnica de Valencia, Spain. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and "ESF Investing in your future.". B. Sanipatin is supported by the Generalitat Valenciana, Spain, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phased Array Antenna Beam-Steering in a Dispersion-Engineered Few-Mode Fiber

  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We present, for the first time to our knowledge, experimental demonstration of tunable optical beamforming for phased array antennas using a few-mode fiber. The double-clad step-index few-mode fiber is dispersion engineered such that it operates as a continuously tunable 5-sample true-time delay line, enabling continuous steering of the beam-pointing angle. Using this approach, we measure the radiation pattern from 5 elements of an in-house fabricated 8-element phased array antenna at the radiofrequency of 26 GHz and demonstrate continuous beam-steering over a 59$<^>\circ$ range by sweeping the optical wavelength from 1543 nm up to 1560 nm. Such a few-mode fiber-based beamformer could be beneficial to next-generation fiber-wireless communications and radar systems, as it provides further versatility and capacity along with reduced size, weight and power consumption., This work was supported in part by the ERC Consolidator under Grant 724663, in part by Spanish Ministerio de Ciencia e Innovacion Project under Grant PID2020-118310RB-100, and in part by Generalitat Valenciana under Grants IDIFEDER/2018/031 and PROMETEO/2021/15.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental demonstration of dispersion-diversity multicore fiber optical beamforming

  • Ureña-Gisbert, Mario
  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] Phased array antenna (PAA) beam-steering in high radiofrequency bands will be key for upcoming 5G & Beyond wireless communications systems. As a compact and efficient solution to provide tunable beam steering simultaneously to parallel antenna distribution and connectivity, we experimentally demonstrate, for the first time to our knowledge, tunable optical beamforming implemented on a dispersion-diversity multicore optical fiber. The uniqueness of this fiber lies in the fact that each one of its seven step-index trench-assisted cores has been tailored to provide the required chromatic dispersion to enable tunable optical true-time delay line operation. Continuous 1D beam-steering was demonstrated by measuring the radiating pattern of an in-house fabricated 8-element PAA in an anechoic chamber at the radiofrequency of 26 GHz, sweeping the beam-pointing angle from -43 degrees up to 40 degrees by varying the operating optical wavelength from 1542.50 up to 1548.28 nm. Next-generation fiber-wireless communications systems will benefit from the demonstrated dispersion-diversity MCF optical beamforming in terms of flexibility, versatility, capacity, and connectivity along with reduced size, weight, and power consumption., Ministerio de Ciencia e Innovacion (PID2020-118310RB-100); Universitat Politecnica de Valencia (PAID10-21); Generalitat Valenciana (IDIFEDER/2020/032); European Research Council (724663).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonic-Assisted Analog-to-Digital Conversion Based on a Dispersion-Diversity Multicore Fiber

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Ureña-Gisbert, Mario
[EN] Multigigabit-per-second photonic-assisted time-interleaved analog-to-digital conversion (ADC) built upon a dispersion-diversity multicore fiber (MCF) is proposed and experimentally demonstrated for the first time to our knowledge. Tunable true-time delay line operation for the analog signal replicas is provided by the different cores of a heterogeneous MCF, which feature different radial dimensions and GeO2 dopant concentrations. Continuous real-time ADC tunability with the optical wavelength is experimentally demonstrated by time interleaving 5 digitized channels achieving equivalent sampling rates of 25, 50 and 125 GS/s for optical wavelengths of 1538, 1534 and 1531.6 nm, respectively. These values are beyond the 10.25-GS/s sampling rates offered by commercial electronic ADCs. One of the advantages of using a MCF for the parallel channels relies on the fact that all the cavities are subject to similar environmental conditions. The introduction of space and dispersion diversities provided by MCFs in photonic-assisted ADCs brings benefits in terms of size, weight, and power consumption reduction along with system flexibility and stability improvement. This is of particular relevance in those application scenarios where an optical fiber link is required to distribute the signal, such as fiber distributed sensing networks, as well as access networks for radar systems or next-generation wireless communications., This work was supported in part by ERC Consolidator under Grant 724663, in part by the Spanish Ministerio de Ciencia e Innovacion under Grant PID2020-118310RB-100, in part by the Generalitat Valenciana Advanced Instrumentation for World Class Microwave Photonics Research under Grant IDIFEDER/2018/031, in part by Generalitat Valenciana PROMETEO/2021/15 Research Excellency Award, and in part by the Universitat Politecnica deValencia PAID-10-21 fellowship for Sergi Garcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multicore Fiber Nonuniformly-Spaced Optical Delay Line for Microwave Signal Processing

  • González-Pérez, Mario Annier|||0000-0001-9378-2942
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We propose and experimentally demonstrate, for the first time, the use of nonuniformly-spaced optical delay lines for microwave photonic discrete-time signal processing, leveraging the spatial diversity inherent in a multicore fiber (MCF). We present the design of a novel 32-core heterogeneous MCF with a tailored chromatic dispersion profile for each core to offer tunability over a 30-nm optical wavelength range, providing flexibility for eight specific microwave signal applications. As a proof of concept, we experimentally demonstrate a nonuniformly-spaced optical delay line based on a 5-km homogeneous MCF and variable delay lines. Our results show that the time delay offsets result in additional phase shifts, leading to an effective conversion to equivalent negative coefficients, all within a compact solution. Our experimental findings include the successful implementation of a bandpass filter with a flat frequency response of around 10 GHz using 5 and 7 taps/cores. Additionally, we present a fractional Hilbert transformer with variable rho pi phase shifts at 8 GHz, validated through the temporal Hilbert transform of a Gaussian pulse. Furthermore, we showcase a microwave pulse phase encoder for Barker and Quaternary Barker sequences, demonstrating accurate encoding of the input signal and a compression ratio consistent with theoretical predictions. Overall, we introduce a compact solution for microwave photonic applications that require negative coefficients. Our approach benefits from the ability of MCFs to provide parallel distributed signal processing with a reduction of size, weight, and power consumption., This work was supported in part by ERC Consolidator under Grant 724663, in part by the Spanish Ministerio de Ciencia e Innovacion under project PID2023-152314OB-I00, project PID2020-118310RB-100 and fellowship PRE2021-099682, and in part by Generalitat Valenciana PROME-TEO/2021/15 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

A Novel Method to Decouple Temperature and Strain Using a Customized Femtosecond Laser-inscribed Superstructure Fiber Bragg Grating

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure FBG. Analyzing resonance distances, it allows distinguishing and complements the contributions of strain and temperature, improving measurements in sensing applications., This work is partially supported by the I+D+I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020 120071RJ I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID-10-22 de la Universitat Politècnica de València. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and ESF Investing in your future. . B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dispersion-Diversity Multicore Fiber Signal Processing

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Ureña-Gisbert, Mario
[EN] Beyond playing a primary role in high-capacity communication networks, multicore optical fibers can bring many advantages to optical and microwave signal processing, as not only space but also chromatic dispersion are introduced as new degrees of freedom. The key lies in developing radically new multicore fibers where the refractive index profile of each individual core is tailored properly to provide parallel dispersion-diversity signal processing with application in a variety of scenarios such as parallel channel equalization, analogue-to-digital conversion, optical computing, pulse generation and shaping, multiparameter fiber sensing, medical imaging, optical coherence tomography, broad-band measurement instrumentation, and next-generation fiber-wireless communications. Here, we experimentally prove, for the first time to our knowledge, reconfigurable two-dimensional dispersion-managed signal processing performed by a novel dispersion-diversity heterogeneous multicore fiber. The fiber comprises seven different trench-assisted cores featuring a different refractive index profile in terms of both radial geometry and core dopant concentration. As a representative application case, we demonstrate reconfigurable microwave signal filtering with increased compactness as well as performance flexibility and versatility as compared to previous technologies., The authors acknowledge financial support by the European Research Council Consolidator Grant 724663, the Spanish Ministerio de Ciencia e Innovacion Project PID2020118310RB-100, and the Generalitat Valenciana Projects IDIFEDER/2018/031 and PROMETEO/2021/15, as well as the Universitat Politecnica de Valencia PAID-10-21 fellowship for S.G.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonic Temporal Operators for Microwave Signals Enabled by Multicore Fibers

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We present, to the best of our knowledge, a novel approach to implement photonic temporal operators for microwave signals using dispersion-diversity heterogeneous multicore fibers. The signal samples are created by the distinct fiber cores, which are dispersion-engineered to offer tunable true time delay line operation. We showcase photonic temporal operators enabled through a 5-km long dispersion-diversity seven-core heterogeneous multicore fiber true time delay line, successfully demonstrating up to the fourth-order temporal differentiation and seven-sample temporal integration, with integration windows ranging from 350 up to 700 ps, for different microwave signals. The proposed scheme holds promise for scalability and parallel implementation of different temporal operators, opening avenues for further advancements in optical computing and signal processing systems. In comparison with other methods, our solution provides important benefits in terms of power consumption, compactness and seamless integration with optical networks. This work paves the way for enhanced performance and efficiency in optical communication and signal processing systems as the multicore fiber provides the medium for both signal processing and distribution functionalities., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion under Project PID2020-118310RB-100 and in part by Generalitat Valenciana under Project PROMETEO/2021/15. The work of Sergi Garcia was supported by the Universitat Politecnica de Valencia under Grant PAID-10-21 Fellowship.