Skip to main content

DISEÑO DE ALEACIONES DE ALUMINIO DE ALTA RESISTENCIA PARA FABRICACION ADITIVA CONSIDERANDO CONDICIONES DE SOLIDIFICACION RAPIDA

PID2020-118626RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The relation between ductility at high temperature and solid solution in Mg alloys

  • Cepeda-Jiménez, C.M.
  • Shi, D.F.
  • Pérez Prado, María Teresa
This work investigates the effect of solid solution on ductility and on the activation of individual deformation mechanisms at moderate temperatures and at quasi-static strain rates in Mg-Zn and Mg-Al alloys. With that aim, four solid solution Mg-Zn and Mg-Al binary alloy ingots containing 1 and 2 wt.% solute atoms were subjected to hot rolling and subsequent annealing to generate polycrystals with similar average grain size and basal-type texture for each composition. The activity of the different slip systems after tensile testing at 150°C and at 250°C was evaluated in pure Mg and in the alloys by EBSD-assisted slip trace analysis. In addition, segregation of Zn and Al atoms at grain boundaries during the thermo-mechanical processing was characterized by HAADF-STEM and EDX. It was found that while the addition of Al and Zn atoms to pure Mg does not lead to major changes in the mechanical strength at the investigated temperatures, it does enhance ductility significantly, especially at 250°C. Our results show that this increase in ductility cannot be attributed to a higher activation of non-basal systems in the alloys, as reported earlier, as the incidence of non-basal systems is indeed considerably higher in pure Mg. This work suggests, on the contrary, that the ductility increase may be attributed to the presence of a more homogenous basal activity in the alloys due to a lower degree of orientation clustering, to grain boundary solute segregation, and to a higher slip diffusivity at grain interiors., The research leading to these results has received funding from the Madrid region under programme S2018/NMT-4381-MAT4.0-CM project. Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by the Spanish Ministry of Science, Innovation and Universities, is also acknowledged. DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion

  • Pérez Prado, María Teresa
  • Martín Jiménez, Ángela
  • Shi, D.F.
  • Milenkovic, Srdjan
  • Cepeda-Jiménez, C.M.
This research aims to study the laser powder bed fusion (L-PBF) processability, the microstructure and the tensile mechanical properties of an AlFeCr alloy at a wide range of temperatures. With this goal, Al-5Fe-6Cr (wt%) pre-alloyed powder was produced by casting and gas atomization. The microstructure of the as-atomized powders and the as-built specimens was characterized via scanning electron microscopy, x-ray diffraction, and transmission electron microscopy. Following a parameter optimization study, dense as-built specimens with a high relative density of 99.8% and a Vickers hardness at room temperature of 192 HV were fabricated. In addition, the newly developed AlFeCr alloy exhibits yield strength values of 273 ± 5 MPa and 179 ± 3 MPa at 300ºC and 400ºC, respectively. The exceptional strength of this alloy at high temperature is attributed to the homogeneous precipitation during processing of large density of nanoscale icosahedral (i-phase) and intermetallic phases, which are endowed with high thermal stability. These values are significantly higher than those corresponding to the conventional wrought Al7075 aluminum alloy in the T6 condition and to all Al alloys manufactured by L-PBF to date. The current research sheds guidelines for the design of high strength aluminum alloys containing transition alloying elements that are suitable to be processed by L-PBF for high temperature structural applications in a cost effective way., The authors wish to acknowledge financial support from the European Union’s Horizon 2020 Clean Sky 2 program (contract No 755610, project AlForAMA). DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154). Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superplastic Behavior of Overaged 2024 Aluminum Alloy after Friction Stir Processing

  • Orozco-Caballero, A.
  • Álvarez Leal, Marta
  • Carreño, Fernando
  • Ruano, Oscar Antonio
A commercial 2024 aluminum alloy was heat treated at 280 °C for 48 h and then slow cooled in a furnace to obtain minimum hardness. This material was then friction stir processed (FSP) using three sets of processing conditions. To study the effect of the processing on the microstructure and the high temperature mechanical properties, the materials were tested in tension at an initial strain rate of 10¿2 s¿1 and temperature range 200 to 450 °C. Processing severity was selected as the main factor for obtaining fine grain sizes right after FSP. The grain size was enormously reduced from about 50 µm to 1 µm. This grain reduction gave rise to very high elongations to failure of about 400%. Strain¿rate-change tests showed a stress exponent close to 2 at intermediate strain rates, which was related to grain boundary sliding as the controlling deformation mechanism and to su- perplasticity, which is strongly grain-size dependent. A possible controlling deformation mechanism by solute-drag creep, as proposed by other authors, was disregarded since tests conducted at 450 °C, where the microstructure of the FSP materials coarsens rapidly, gave a low elongation to failure and high resistance, which showed the importance of the grain size dependence of the operative deformation mechanism at 250¿400 °C, which was only compatible with grain boundary sliding., Financial support from MINECO (Spain), Project MAT2015-68919-C3-1-R (MINECO/FEDER) is gratefully acknowledged. Funding from project PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the Zr content on the processability of a high strength Al-Zn-Mg-Cu-Zr alloy by laser powder bed fusion

  • Martín Jiménez, Ángela
  • Vilanova, M.
  • San Sebastián, María
  • Wang, C.Y.
  • Milenkovic, Srdjan
  • Pérez Prado, María Teresa
  • Cepeda-Jiménez, C.M.
The objective of this research is to study the effect of the Zr on the L-PBF processability, microstructure, and microhardness of an AlZnMgCu-Zr alloy. Two AlZnMgCu-0.5 and 1.5 wt% Zr pre-alloyed powders were produced by casting followed by gas atomization. In addition, an excess of Mg and Zn was added to the target compositions to compensate for vaporization during L-PBF. The as-atomized powders and the as-built and heat treated specimens were characterized via scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy. Crack-free samples with a relative density of 99.0 ± 0.1% were obtained in the alloy containing 1.5 wt%Zr. The as-built microstructure of this alloy consisted of small equiaxed grains without preferred grain orientation near the melt pool boundary and slightly columnar grains between adjacent melt pools. After a solution and aging heat treatment (T6), the newly developed AlZnMgCu-1.5Zr alloy has an outstanding Vickers micro-hardness of 223 ± 3 HV, which is significantly higher than that of the wrought Al7075-T6 aluminum alloy. This excellent mechanical behavior is attributed to the presence of large AlZr nucleant particles of up to 500 nm in size that inhibit grain growth during solidification and the subsequent heat treatment, and of a high density of nanoscale second phases (MgZn and AlZr) located within the aged α-Al grains., The authors wish to acknowledge financial support from the European Union's Horizon 2020 Clean Sky 2 program (contract No 755610, project AlForAMA). Leonardo Aircraft is also thanked for its support as topic manager. CYW acknowledges funding from the Fundamental Research Funds for the Central Universities in China (grant number 3102019QD0415). Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Solid Solutions on the Al2024 High-Temperature Deformation Behavior

  • Ruano, Oscar Antonio
  • Orozco-Caballero, A.
  • Álvarez Leal, Marta
  • Carreño, Fernando
The mechanical properties of 2024 aluminum alloy were studied after two different tempers. The T351 temper (solution heat treatment, stress relief, and natural aging) leads to high hardness and toughness. A thermal treatment consisting of heat-treating at 280 °C for 48 h and slow cooling in a furnace, named TT temper, was performed to increase the precipitate size and their separation while minimizing the amount of solutes in solid solution, which produced the minimum hardness for an overaged Al2024 alloy and a lower tensile flow stress than for the T351 temper. The flow stress strongly decreases and the elongation to failure strongly increases for both materials above 300 °C. Differences in strain rate at a given stress in the power law regime at all temperatures for both tempers and compared with pure aluminum are attributed to the influence of solutes in solid solutions, affecting both the glide and climb of dislocations. However, the stacking fault energy, SFE, alone does not account for the hot deformation behavior. Thus, it is the synergistic effect of various solutes that affects the entire deformation process, causing a decrease of three or four orders of magnitude in strain rate for a given stress with respect to the pure aluminum matrix values., Financial support from MINECO (Spain), Project MAT2015-68919-C3-1-R (MINECO/FEDER), is gratefully acknowledged. Funding from the project PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged. A. O-C. also thanks CENIM-CSIC for a contract funded by the MAT2015-68919-C3-1-R project and O.A.R. for a Professor ad honorem position. M. A-L. thanks MINECO for an FPI fellowship, number BES2013-063963 (MINECO/FEDER/ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Activation of second-order <c+a> pyramidal slip and other secondary mechanisms in solid solution Mg-Zn alloys and their effect on tensile ductility

  • Cepeda-Jiménez, C.M.
  • Shi, D.F.
  • Ma, A.
  • Pérez Prado, María Teresa
This work investigates the strain-dependent activation of second-order <c+a> pyramidal slip and other non-basal systems with increasing tensile strain in a Mg-Zn alloy. With that purpose, a polycrystalline solid solution Mg-Zn alloy with ∼2 wt.% Zn (∼0.75 at. %) and with an average grain size of ∼36 μm was processed by casting, hot rolling and subsequent annealing. The slip activity with tensile strain was analyzed by electron backscattered diffraction (EBSD)-assisted slip trace analysis. Basal slip was found to be the dominant deformation mechanism at low strains (∼5-10%). However, at higher strains the activity of pyramidal slip increases significantly due to the hardening of basal slip by Zn solutes. Other non-basal deformation mechanisms, such as compression twinning, cross-slip and slip transfer between pyramidal planes, come into play also at higher strains and are shown to be induced by pyramidal slip. Molecular dynamics (MD) simulations have been used, in particular, to demonstrate the influence of pyramidal dislocations on the nucleation of compression twins. The large availability of deformation mechanisms at high strains contributes to improve the RT ductility of the Mg-Zn alloy., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities under project PID2019-111285RB-I00 and PID2020-118626RB-I00, European Union Horizon 2020 research and innovation programme (Marie Sklodowska-Curie Individual Fellowships, Grant Agreement 795658) and the Comunidad de Madrid Talento-Mod1 programme (Grant Agreement PR-00096). DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Machine learning dislocation density correlations and solute effects in Mg-based alloys

  • Salmenjoki, H.
  • Papanikolaou, Stefanos
  • Shi, D.F.
  • Tourret, D.
  • Cepeda-Jiménez, C.M.
  • Pérez Prado, María Teresa
  • Laurson, L.
  • Alava, M. J.
Magnesium alloys, among the lightest structural materials, represent excellent candidates for lightweight applications. However, industrial applications remain limited due to relatively low strength and ductility. Solid solution alloying has been shown to enhance Mg ductility and formability at relatively low concentrations. Zn solutes are significantly cost effective and common. However, the intrinsic mechanisms by which the addition of solutes leads to ductility improvement remain controversial. Here, by using a high throughput analysis of intragranular characteristics through data science approaches, we study the evolution of dislocation density in polycrystalline Mg and also, Mg–Zn alloys. We apply machine learning techniques in comparing electron back-scatter diffraction (EBSD) images of the samples before/after alloying and before/after deformation to extract the strain history of individual grains, and to predict the dislocation density level after alloying and after deformation. Our results are promising given that moderate predictions (coefficient of determination R ranging from 0.25 to 0.32) are achieved already with a relatively small dataset (∼ 5000 sub-millimeter grains)., HS acknowledges the support from Finnish Foundation for Technology Promotion. MA and SP acknowledge support from the European Union Horizon 2020 research and innovation programme under grant agreement No 857470 and from European Regional Development Fund via Foundation for Polish Science International Research Agenda PLUS programme grant No MAB PLUS/2018/8. LL acknowledges the support of the Academy of Finland via the Academy Project COPLAST (Project no. 322405). DT gratefully acknowledges support from the Spanish Ministry of Science through a Ramon y Cajal Fellowship (Ref. RYC2019-028233-I). CMCJ acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities under project PID2020-118626RB-I00. The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities under project PID2019-111285RB-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Powder Metallurgy Processing to Enhance Superelasticity and Shape Memory in Polycrystalline Cu–Al–Ni Alloys: Reference Material for Additive Manufacturing

  • Pérez-Cerrato, Mikel
  • Gómez-Cortés, Jose F.
  • Urionabarrenetxea, Ernesto
  • Ruiz-Larrea, Isabel
  • Carreño, Fernando
  • Ayesta, Ízaro
  • Nó, M.L.
  • Burgos, Nerea
  • San Juan, Jose M.
Shape memory alloys (SMAs) are functional materials with a wide range of applications, from the aerospace sector to the biomedical field. Nowadays, there is a worldwide interest in developing SMAs through powder metallurgy like additive manufacturing (AM), which allows innovative building processes. However, producing SMAs using AM techniques is particularly challenging because of the microstructure required to obtain optimal functional properties. This aspect is critical in the case of Cu–Al–based SMAs, due to their high elastic anisotropy, making them brittle in polycrystalline form. In this work, we approached the processing of a Cu–Al–Ni SMA following a specific powder metallurgy route: gas atomization of a pre-alloyed melt; compaction of the atomized powders through hot isostatic pressing; and a final hot rolling plus thermal treatments. Then, the microstructure of the material was characterized by electron microscopy showing a specific [001] texture in the rolling direction that improved the functional behavior. The successive processing steps produce an increase of about 40 °C in the martensitic transformation temperatures, which can be well controlled and reproduced through the developed methodology. The thermomechanical functional properties of superelasticity and shape memory were evaluated on the final SMA. Outstanding, fully recoverable superelastic behavior of 4.5% in tension, as well as a ±5% full shape memory recovery in bending, were reported for many cycles. These experiments demonstrate the enhanced mechanical and functional properties obtained in polycrystalline Cu–Al–Ni SMAs by powder metallurgy. The present results pave the road for producing this kind of SMA with the new AM technologies, which always produce polycrystalline components and can improve their processes taking the powder metallurgy SMA, here produced, as reference material., This research was supported by the Industry Department of the Basque Government through the ELKARTEK-ATLANTIS (KK-2024/00061) project, by the Spanish Ministry of Science and Innovation through the Projects PID2021-122160NB-I00 and PID2020-118626RB-I00, and from the GIU-21/024 from the University of the Basque Country UPV/EHU. This work made use of the electron microscopy facilities of the SGIKER from the UPV/EHU. M. Pérez-Cerrato acknowledges the Pre-Doctoral grant (PRE_2019_2_0268) from the Education Department of the Basque Country. J.F. Gómez-Cortés thanks the Post-Doctoral Grant (ESPDOC18/37) from the UPV/EHU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Predicting grain size-dependent superplastic properties in friction stir processed ZK30 magnesium alloy with machine learning methods

  • Bahari-Sambran, F.
  • Carreño, Fernando
  • Cepeda-Jiménez, C.M.
  • Orozco-Caballero, A.
The aim of this work is to predict, for the first time, the high temperature flow stress dependency with the grain size and the underlaid deformation mechanism using two machine learning models, random forest (RF) and artificial neural network (ANN). With that purpose, a ZK30 magnesium alloy was friction stir processed (FSP) using three different severe conditions to obtain fine grain microstructures (with average grain sizes between 2 and 3 µm) prone to extensive superplastic response. The three friction stir processed samples clearly deformed by grain boundary sliding (GBS) deformation mechanism at high temperatures. The maximum elongations to failure, well over 400% at high strain rate of 10 s, were reached at 400 °C in the material with coarsest grain size of 2.8 µm, and at 300 °C for the finest grain size of 2 µm. Nevertheless, the superplastic response decreased at 350 °C and 400 °C due to thermal instabilities and grain coarsening, which makes it difficult to assess the operative deformation mechanism at such temperatures. This work highlights that the machine learning models considered, especially the ANN model with higher accuracy in predicting flow stress values, allow determining adequately the superplastic creep behavior including other possible grain size scenarios., Financial support was obtained from Comunidad de Madrid through the Universidad Politécnica de Madrid in the line of Action for Encouraging Research from Young Doctors (project CdM ref: APOYO-JOVENES- 779NQU-57-LSWH0F , UPM ref M190020074AOC , CAREDEL), as well as MINECO (Spain) Project MAT2015-68919-C3-1-R (MINECO/FEDER) and project PID2020-118626RB-I00 (RAPIDAL) awarded by MCIN/AEI/10.13039/501100011033 . Pilar Rey (AIMEN) and Marta Álvarez-Leal (CENIM) are gratefully acknowl- edged for FSP assistance. FBS also thanks Project CAREDEL and Project RAPIDAL for research contracts and MCIN/AEI for a FPI contract number PRE2021-096977 ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Predictive processing maps for laser-powder bed fusion using transfer learning and melt pool geometry

  • Bahari-Sambran, F.
  • Orozco-Caballero, A.
  • Carreño, Fernando
  • Cepeda-Jiménez, C.M.
This study explores the use of artificial neural networks (ANN) and transfer learning (TL) to develop processing maps that guide defect-free manufacturing of as-built L-PBF aluminum (AlSi10Mg) and stainless steel (SS316L) specimens. The complex non-linear relationships between processing parameters and the thermal properties of the materials, which influence melt pool development, highlight the need for machine learning (ML) tools to achieve high-quality processability in a cost-effective manner. Commercial AlSi10Mg and SS316L powders were processed using L-PBF, resulting in various types of porosity, such as keyhole and lack-of-fusion defects, under different processing conditions. We first characterized the bulk density and melt pool features (width and depth) through optical microscopy and image analysis. Next, we trained ANN base models using data from existing literature to predict the bulk density and melt pool geometries of the as-built samples. Finally, we refined these models with our experimental data after transferring the base models. The results indicate that our proposed models and TL methodology effectively predict processing maps, identify optimal processing parameters for maximum density, and establish the threshold for lack-of-fusion porosity., The research leading to these results has received funding from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/ 501100011033) under projects PID2020-118626RB-I00 and PID2023- 152337OB-I00. FBS is grateful for an FPI fellowship awarded by the Spanish Ministry of Science and Innovation (Grant no PRE2021- 096977). F. Arag´on at the Additive Manufacturing lab (CENIM-CSIC) is also thanked for his assistance with L-PBF.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic and static strain aging in AlFeCrX alloys processed by laser powder bed fusion

  • Bahari-Sambran, F.
  • Cepeda-Jiménez, C.M.
  • Carreño, Fernando
In this study, newly designed high-strength AlFeCrX (X = Si, Ti, and TiSi) alloys were fabricated using laser powder bed fusion (LPBF). The mechanical properties and strain rate sensitivity (m) of as-built AlFeCrX alloys were evaluated through uniaxial compression tests using strain rate change (SRC) across various temperatures (RT–400 °C) and strain rates (10–10 s). For comparison, a LPBF-processed AlSi10Mg commercial alloy was also tested. Transmission electron microscopy (TEM) analysis confirmed the formation of a supersaturated solid solution of transition elements in the α-Al matrix of the as-built LPBF AlFeCrX alloys, particularly Ti, Si, and Cr, while Fe was primarily observed precipitating along grain boundaries. The stress–strain curves of the LPBF AlFeCrX specimens, which clearly show strain rate variations, exhibited no serrated flow but revealed negative m values at testing temperatures ranging from 150 to 200 °C. This behavior is attributed to solute–dislocation interactions, which drive dynamic and static strain aging (DSA and SSA) mechanisms. Consequently, solutes play a crucial role in the material intermediate-to-high-temperature response, because of the diffusivity and supersaturation of transition element solutes in the as-built AlFeCrX alloys., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Agencia Estatal de Investigación, PID2020-118626RB-I00, Carmen M. Cepeda-Jimenez, PID2023-152337OB-I00, Carmen M. Cepeda-Jimenez, PRE2021-096977, Farid Bahari-Sambran