Skip to main content

METODOLOGIAS DE URBANIZACION RESILIENTE Y ACONDICIONAMIENTO NATURAL MEDIANTE SOLUCIONES BASADAS EN LA NATURALEZA Y EL PATRIMONIO CULTURAL PARA RECUPERAR LA VIDA EN LA CALLE

PID2020-118972RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Heat wave resilience in open Spaces: A case study of a Self-Sufficient cooling shelter

  • Montero Gutiérrez, María de la Paz
  • Sanchez Ramos, José
  • Guerrero Delgado, MCarmen
  • Palomo Amores, Teresa Rocío
  • Cerezo Narváez, Alberto
  • Álvarez Domínguez, Servando
Climate change intensifies urban uninhabitability due to increasingly frequent heat waves. To alleviate it, climatic shelters emerge as an initiative for the research community, which should deepen the integration of technologies that use natural resources for cooling. This work aims to evaluate a novel climatic shelter by characterizing its thermal behavior through an experimental study at a bus stop. It has the capacity to alleviate the thermal stress of its occupants thanks to cooling modules. The results allow to determine the capacity of the natural water-cooling system and the level of thermal storage, allowing to quantify the impact on the citizen by means of the COMFA comfort index. It is corroborated that the chilled water temperature reduces the surface temperature by 15 ◦C. The installation reduces overheating caused by solar radiation by 75 % compared to traditional shelters. It also demonstrates energy and electrical self-sufficiency even during high intensity heat waves. The shelter maintains daytime water temperature between 18 and 25 ◦C, even in heat waves exceeding 7 days and 45 ◦C air temperature. The COMFA index has been reduced to values between 70 and 120 W/m2 in 90 % of the worst weather conditions in Csa climates by K¨oppen Geiger, for the months of July and August 2023.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Enhancing the building resilience in a changing climate through a passive cooling roof: A case study in Camas (Seville, Spain)

  • Monge Palma, Rafael Antonio
  • Castro Medina, Daniel
  • Guerrero Delgado, MCarmen
  • Sanchez Ramos, José
  • Montero Gutiérrez, Paz
  • Álvarez Domínguez, Servando
Renovating buildings is a crucial mission for the coming decades to combat energy inefficiencies and produce a resilient building stock. The inefficient thermal envelope has significant implications for occupants, especially for families lacking the financial resources to maintain a healthy and comfortable indoor environment. In scenarios where households cannot afford or utilize HVAC systems and high temperatures are more frequent, building retrofits should prioritize reducing heat loss in winter and passively lowering indoor temperatures in the cooling season. This work introduces a new solution to enhance the liveability of a social housing building in southern Spain by integrating a double-skin roof with a conventional retrofit strategy, which incorporates passive cooling techniques – night ventilation and an evaporative cooling system – for effective heat dissipation based on available commercial solutions. An extensive monitoring campaign was conducted over three years to evaluate the thermal comfort of occupants and the risk of overheating in naturally conditioned buildings before and after renovation following two impact assessment methods: real-time data-based and simulation-based. The real-time data-based method compared the indoor conditions of a dwelling with a conventionally retrofitted roof to one with a double-skin roof, indicating that the dynamic roof maintains a ceiling temperature lower than the air temperature throughout the summer while the conventional roof acts as a heating surface. On the other side, the simulation-based method compared the observed indoor conditions with a double-skin roof enabled during 2023 to the initial stage and a double-skin roof disabled scenario, using calibrated building energy models. The natural cooling roof solution almost eliminates the overheating events, leading to a reduction of 94.1% and 76.9% in discomfort degree-hours compared to the initial stage according to the ASHRAE adaptative and Fanger comfort models, respectively. Additionally, the results indicate that conventional retrofits can increase the risk of overheating when a cooling system is not considered. Integrating a cool roof solution requires only an extra implementation cost of 31€/m2 compared to a conventional solution, having an operational cost that represents less than 3% of the minimum monthly income in the social housing district.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Forecasting urban temperatures through crowdsourced data from Citizen Weather Stations

  • Romero Rodríguez, Laura
  • Guerrero Delgado, MCarmen
  • Castro Medina, Daniel
  • Sanchez Ramos, José
  • Álvarez Domínguez, Servando
This work explores the potential of using crowdsourced data from Citizen Weather Stations (CWS) to forecast urban temperatures. Five case studies were selected (Madrid, London, Rome, Paris and Berlin), using data from the manufacturer Netatmo to gather the hourly temperatures of the years 2021 and 2022 for 776 CWS. A quality-control process was implemented to enhance data accuracy, and heat maps were generated. Multiple linear regression models were created for each CWS and month using only reference weather data as input, resulting in the development of accurate models (RMSE lower than 1.5 ◦ C) for an average of 374 CWS. Then, reference weather predictions were used on the 2nd of April 2023 to forecast the hourly temperatures of those CWS for the period from the 3rd to the 9th of April (168 h). The outcomes showed that accurate CWS data and precise prediction models for the reference weather are crucial to improve the accuracy of the forecasts using crowdsourced data. The study demonstrates the potential benefits of using CWS data and simple models to forecast urban temperatures in a cost-efficient way even 168 h ahead, with implications for various sectors such as urban planning, energy consumptions, health impacts, or climate change adaptation strategies.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Building geometry data from online maps for accurate thermal simulations of districts

  • Romero Rodríguez, Laura
  • Sánchez Ramos, José
  • Álvarez Domínguez, Servando
Current approaches for simulating the energy performance of buildings on a large scale are limited by numerous assumptions and simplifications, which can lead to inaccurate estimations. While new tools and procedures are emerging to improve accuracy, there remains a need for more user-friendly methods. This study proposes a new tool based on online maps to create the geometry of districts in a simple way. The tool also enables an automatic evaluation of all buildings through dynamic hourly simulations, using a building simulation software and allowing to consider different weather conditions. To illustrate the procedure, a district at risk of energy poverty in Seville (Spain) is modeled, where hourly temperature data for a whole year are available to demonstrate the need for building improvements. The tool is used to evaluate the energy demands of the district under several retrofitting alternatives, and free-floating simulations are also performed to evaluate the improvement of thermal comfort without air-conditioning systems. The aim is not to discuss the actual values for this particular case, but rather to identify the correct direction for large-scale studies, so as to make them more easily conducted. Overall, it may be concluded that the results provided by comprehensive tools, such as the one proposed in this study, enable easy yet accurate evaluations of buildings on a large scale with significant time savings, as well as the identification of locations where retrofitting interventions would have the greatest impact.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Experimental Validation of the Potential of Cross-Ventilation Strategy as a Natural Cooling Technique Integrated in a Real Historic Building

  • Palomo Amores, Teresa Rocío
  • Ruda Sarria, Francisco
  • Castro Medina, Daniel
  • Cano Valera, Teresa
  • Sánchez Ramos, José
  • Álvarez Domínguez, Servando
Natural ventilation in hot climates represents a key strategy to reduce the dependence on mechanical cooling systems, especially in historic buildings, where it is essential to balance thermal comfort and heritage conservation. This study analyses the effectiveness of various natural ventilation strategies in a historic building located in Écija, Seville, which is characterised by a warm climate with nocturnal thermal dips. Experimental data obtained during a summer monitoring campaign were used to validate computational fluid dynamics (CFD) models and thermal simulations. In addition, an efficiency index was defined to quantify the indoor temperature reduction. The results show a cooling efficiency close to 40%, achieving an average reduction of 3 °C in the indoor temperature during the summer. Simulations of different modes of operation of natural ventilation show a 30% improvement in comfort hours according to Spanish regulations and a 50% reduction in the thermal difference during non-comfort hours. This work demonstrates that natural ventilation can significantly improve indoor conditions, offering a sustainable and replicable approach for historic buildings in hot climates.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Extending the Thermal Comfort Band in Residential Buildings: A Strategy towards a Less Energy-Intensive Society

  • Monge Palma, Rafael Antonio
  • Sanchez Ramos, José
  • Guerrero Delgado, M.D.C
  • Palomo Amores, Teresa Rocío
  • Romero Rodríguez, Laura
  • Álvarez Domínguez, Servando
Extending set-point temperatures in residential buildings has a significant impact on energy demand and thermal comfort. European governments have adopted this strategy to mitigate the energy crisis. Previous studies attempting to quantify energy savings by extending set-point temperatures were limited due to a lack of building stock characterisation, poor climate representation, and the absence of uniformity in the reference set-point temperature. In this study, a large-scale simulation was conducted, which included six building models covering 90% of southern Europe Köppen–Geiger climates, where 20 ◦C and 25 ◦C were the reference heating and cooling set-point temperatures, respectively. This also accounted for the thermal characteristics of the older building stock, built more than 15 years ago, and the new buildings built under the latest version of Directive 2010/31/EU. The results show that reducing the heating set-point temperature by 1 ◦C can lead to an average demand reduction of 20%, while raising the cooling set-point temperature by 1 ◦C can lead to a 25% cooling demand reduction. The oldest building stock shows a higher absolute savings potential. Adjusting thermostats by 1 ◦C in Spanish homes during the winter season could represent a saved natural gas volume of 1.8 million normal cubic meters, nearly 40% of the gas demand of households in 2022. These findings suggest that extending the set-point temperatures in residential buildings can be a promising strategy towards a more energy-efficient society without compromising the occupant’s thermal comfort.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Empowering urban climate resilience and adaptation: Crowdsourcing weather citizen stations-enhanced temperature prediction

  • Castro Medina, Daniel
  • Guerrero Delgado, M. Carmen
  • Sanchez Ramos, José
  • Palomo Amores, Teresa Rocío
  • Romero Rodríguez, Laura
  • Álvarez Domínguez, Servando
The growing impact of climate change, including extreme weather events, represents a significant challenge for humanity. With most of the world's population living in urban areas, the urban heat island effect and anthropogenic heat contribute to elevated city temperatures. This increase in urban warming threatens human health and demands a deeper understanding of thermal distribution in urban environments. Collecting accessible and widespread temperature data in urban areas is essential to address this challenge. This study aims to develop a methodology for anticipating temperature distribution in urban environments, leveraging Citizen Weather Stations (CWS) as valuable crowdsourcing data sources. The ultimate goal is to create a predictive model that estimates urban temperatures based on government meteorological station forecasts, improving urban planning, regulating temperature-based routes, preventing health issues in vulnerable populations, and enhancing urban livability. The methodology is divided into three fundamental stages: data acquisition through CWS with citizen collaboration, the development and evaluation of optimal forecast models based on government weather stations (SWS) data, and its exploitation in terms of utility and applicability. This methodology encompasses data collection and filtering to ensure its usefulness and implement reliable models. The resulting tool facilitates informed decision-making and precise seasonal event planning in urban environments, effectively addressing the challenges of climate extrapolation and contributing to more effective adaptation and mitigation strategies in climate change and heatwaves. The results obtained probe the feasibility of using CWS to predict temperatures in urban environments, which has been demonstrated accurately. This is a significant achievement, as CWS has proven to be a reliable source of climate data for this context. Also, the filtering process described and applied to the case study has proven effective, discarding approximately 34.87 % of the data. This is achieved by detecting and eliminating anomalies, considering station availability, and adhering to specific quality criteria. Finally, the developed prediction model has demonstrated its ability to optimally estimate urban temperatures, utilizing climate prediction data provided by government weather stations (SWS). The model performance indicators support this claim. For the linear regression model, a Mean Squared Error (MSE) of 2.177 and an R-squared (R2) of 0.960 are obtained, while for the neural network, an MSE of 1.284 and an R2 of 0.976 are achieved.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Simplifying the process to perform air temperature and UHI measurements at large scales: Design of a new APP and low-cost Arduino device

  • Romero Rodríguez, Laura
  • Sánchez Ramos, José
  • Álvarez Domínguez, Servando
The main purpose of Urban Heat Island (UHI) studies and the monitoring of ambient temperatures at large scales is to gather temperature information in a certain area, so as to understand temperature heterogeneity and its drivers or detect locations that lack thermal comfort. However, these studies originate mostly from some research projects, with sufficient budget and manpower to carry out the measurements and the necessary calculations. Thus, there is a scarcity of air temperature information, making it difficult to implement appropriate mitigation actions worldwide. The present work aims to greatly simplify the process to monitor air temperatures and carry out UHI estimations through mobile transects. This is done by introducing the design of a low-cost device and a new APP, which performs automatically most necessary UHI calculations. A web tool based on the Inverse Distance Weighting interpolation method is also included to obtain heat maps. The methodology is illustrated using case studies in Seville (Spain) and New York city (USA). By introducing a straightforward and reproducible methodology, we aim to open the path for a more widespread availability of ambient temperature data anywhere in the world, without the need for costly equipment and many hours of dedication by the researchers
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Natural cooling solution for thermally conditioning bus stops as urban climate shelters in hot areas: Experimental proof of concept

  • Montero Gutiérrez, María de la Paz
  • Sánchez Ramos, José
  • Guerrero Delgado, MCarmen
  • Cerezo Narváez, Alberto
  • Palomo Amores, Teresa Rocío
  • Álvarez Domínguez, Servando
In response to the challenges posed by climate change and the growing heat patterns in cities, this study addresses the design and implementation of climate shelters integrated into public transport stops through the installation of surface radiant cooling modules. The aim is to improve the thermal comfort of short-stay users in cities in hot, dry climates. To this end, a fully sensorized thermal camera was used in a controlled setting to simulate real outdoor climate conditions and evaluate the efficacy of the radiant system. The prototype was modelled and characterized by means of in situ measurements, paying special attention to the temperature and radiant heat flux. The radiant modules maintained a temperature between 18 ◦C and 20 ◦C, even under oppressive conditions, with over 50% of the cooling flux due to radiation. The radiative performance of the prototype did not increase proportionally with increased water flow, stabilizing at high flows. The analysis of the thermal comfort index showed a decrease in feelings of discomfort of between 40% and 50% when the modules reached the set point temperature. The study shows that implementing these climate shelters in public transport stops such a bus shelters is feasible in hot, dry climates. This may be an effective strategy for mitigating the effects of climate change in urban areas and can be applied in any city that suffers from recurring heatwaves, thereby improving living conditions for city goers.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Exploring the energy implications of human thermal adaptation to hot temperatures in present and future scenarios: a parametric simulation study

  • Sánchez García, Daniel
  • Bienvenido-Huertas, David
  • Kim, Jungsoo
  • Pisello, Anna Laura
Understanding how humans adapt to indoor thermal conditions is crucial for designing spaces that promote well-being while achieving energy efficiency goals. Adaptive setpoint temperatures assume occupants adapt to mechanically conditioned spaces as if they were naturally ventilated. However, a broader perspective beyond specific models and climates is needed. This paper explores the energy implications of adaptive comfort models, analyzing key parameters: gradient, y-intercept, offset from neutrality, and applicability upper limit. The Adaptive-Comfort-Control-Implemented Model (ACCIM) tool and BESOS parametric simulation framework were employed to simulate thousands of variations. Future Shared Socioeconomic Pathways (SSP1-2.6, SSP2-4.5, SSP3-7.0, SSP5-8.5) for 2050 and 2080 were considered. Results highlight that the comfort zone threshold (named ASToffset) has the highest impact on cooling demand, with reductions up to 59 %. Then, 1300 parameter combinations were summarized into 10 adaptation profiles, revealing cooling demand reductions of 1 %–17 % per adaptation level. Adaptation profiles indicate significant energy savings by increasing operative temperatures in hot climates. This study reconciles adaptive comfort and energy efficiency, providing insights into the influence of adaptive comfort equations and the energy implications of varying adaptation levels in current and future climates. Findings support the design of energy-efficient spaces, addressing climate change challenges and improving sustainability.