Skip to main content

RESILIENCIA DE INFRAESTRUCTURAS EXISTENTES DE HORMIGON ARMADO FRENTE A RIESGOS DE DETERIORO Y CAMBIO CLIMATICO

PID2021-123701OB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LAS ISLAS BALEARES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges

  • Traver-Abella, Celia
  • Ruiz Pinilla, Joaquín Guillermo
  • Monserrat-Lopez, Andrea
  • Montoya-Coronado, Luis A.
  • Ribas, Carlos
  • Cladera, Antoni
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] This research focuses on the proof of concept of the feasibility of iron-based shape memory alloys strips (Fe-SMA) to strengthen damaged structures by promoting the yielding of longitudinal reinforcement. For this purpose, an experimental campaign on real-scale reinforced concrete beams previously damaged on shear and retested after being strengthened was carried out. The strengthening technique consists of external Fe-SMA strips wrapping the beams. The results show a very significant increase in both shear strength and ductility. In addition, shear predictions were calculated and compared by several design models. This study highlights the potentialities of Fe-SMA as a strengthening technique for damaged beams on shear., The authors would like to thank the financial support provided by Grants: PID2021-126397OB-I00, PID2021-123701OB-C22, BIA2015-64672-C4-4-R and BIA2015-3 64672-C4-3-R by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."; RTI2018-099091-B-C21-AR and RTI2018-099091-B-C22 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and BIA2015-64672-C4-4-R and BIA2015-64672-C4-3-R (AEI/FEDER, UE); and TED2021-129358B-I00 and TED2021-130272B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The Regional Valencian Government also supported this research with Project AICO/2020/295. Andrea Monserrat is supported by the Ministry of Universities (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/2021) funded by NextGenerationEU. The authors thank the Spanish Ministry of Science and Innovation for Grant FPU18/03310 that supported Celia Traver Abella. This research work was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain), with concrete supplied by Caplansa. They also appreciate the contribution of the re-fer AG Strengthening Solution Company, which provided the memory steel (Fe-SMA strips).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effects of semi-cyclic loading on the recovery stresses of iron-based shape-memory alloy bars

  • Mir, Antoni
  • del Río Bonnin, Sandra
  • Ribas González, Carlos Rodrigo
  • Ruiz-Pinilla, Joaquín G.
  • Ortiz Bernal, Galo Fabian|||0000-0002-9823-1637
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Cladera Bohigas, Antoni
Shape-memory alloys (SMAs) have attracted considerable interest in structural engineering because of their ability to ‘memorise’ their original form when subjected to thermomechanical variations, a phenomenon termed the shape memory effect. By controlling the heating and cooling (activation) of SMAs under constrained deformation, recovery stresses can be generated, making SMAs suitable for use as prestressing reinforcement in concrete structures. However, recent studies suggest that the benefits of reinforcing with iron-based SMA (Fe-SMA) could be considerably reduced under semi-cyclic loading. This paper focuses on analysing the behaviour of 16 mm diameter Fe-SMA reinforcing bars when subjected to consecutive activations and semi-cyclic tensile tests. Activations at different temperatures (160, 200 and 250ºC) were performed, followed by semi-cyclic load tests until high strain levels were carried out. The results show a correlation between the temperature reached during the activation and the recovery stress achieved. Furthermore, the data confirms that high strain levels induced by semi-cyclic loads can lead to a complete loss of the initially generated recovery stresses. However, by re-activating the Fe-SMA samples, it is possible to restore a similar level of the initial recovery stresses. Moreover, for practical structural engineering applications in RC beams, where strain increments might be modest, only partial stress losses would be produced. These partial losses could be treated, for designing, as a prestressing loss., This research was conducted as a part of projects CICLO, funded from Comunitat Autonòma de les Illes Balears through the Direcció General de Recerca, Innovació i Transformació Digital with funds from the Tourist Stay Tax Law (PDR2020/39 - ITS2017-006), and PID2021-123701OB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Also acknowledge SOIB/ Direcció General de Recerca, Innovació i Transformació Digital and European Union Next Generation EU for the grant given to the first author., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effects of semi-cyclic loading on the recovery stresses of iron-based shape-memory alloy bars

  • Mir, Antoni
  • del Río Bonnin, Sandra
  • Ribas González, Carlos Rodrigo
  • Ruiz-Pinilla, Joaquín G.
  • Ortiz Bernal, Galo Fabian
  • Oller Ibars, Eva
  • Cladera Bohigas, Antoni
Shape-memory alloys (SMAs) have attracted considerable interest in structural engineering because of their ability to ‘memorise’ their original form when subjected to thermomechanical variations, a phenomenon termed the shape memory effect. By controlling the heating and cooling (activation) of SMAs under constrained deformation, recovery stresses can be generated, making SMAs suitable for use as prestressing reinforcement in concrete structures. However, recent studies suggest that the benefits of reinforcing with iron-based SMA (Fe-SMA) could be considerably reduced under semi-cyclic loading. This paper focuses on analysing the behaviour of 16 mm diameter Fe-SMA reinforcing bars when subjected to consecutive activations and semi-cyclic tensile tests. Activations at different temperatures (160, 200 and 250ºC) were performed, followed by semi-cyclic load tests until high strain levels were carried out. The results show a correlation between the temperature reached during the activation and the recovery stress achieved. Furthermore, the data confirms that high strain levels induced by semi-cyclic loads can lead to a complete loss of the initially generated recovery stresses. However, by re-activating the Fe-SMA samples, it is possible to restore a similar level of the initial recovery stresses. Moreover, for practical structural engineering applications in RC beams, where strain increments might be modest, only partial stress losses would be produced. These partial losses could be treated, for designing, as a prestressing loss., This research was conducted as a part of projects CICLO, funded from Comunitat Autonòma de les Illes Balears through the Direcció General de Recerca, Innovació i Transformació Digital with funds from the Tourist Stay Tax Law (PDR2020/39 - ITS2017-006), and PID2021-123701OB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Also acknowledge SOIB/ Direcció General de Recerca, Innovació i Transformació Digital and European Union Next Generation EU for the grant given to the first author., Peer Reviewed, Postprint (published version)