Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring soda contamination coming from paper straws through ultra-high-pressure liquid chromatography coupled with an ion mobility-quadrupole time-of-flight analyzer and advanced statistical analysis

  • Canellas, Elena
  • Vera, Paula
  • Nerin, Cristina
  • Goshawk, Jeff
  • Dreolin, Nicola
This study deals with the migration of compounds from printed straws into a carbonated drink (soda), employing an innovative approach that combines Ultra-High-Pressure Liquid Chromatography with Ion Mobility Quadrupole Time of Flight Mass Spectrometry technology. Nineteen compounds were found to migrate to the soda from the nine samples analyzed with concentrations ranging values from 0.015 to 3.6 mg migrant/kg of soda. Variations in the compounds across obtained from three different manufacturers were found. These differences strongly suggest the use of different additives in the production of straws from the different manufacturers. Additionally, discrepancies in the compounds that migrated from the printed straws produced by one manufacturer were identified. Two photoinitiators, 2,2-dimethoxy-2-phenylacetophenone and diphenyl (2,4,6-trimethylbenzoyl)- phosphine oxide and a dye, rhodamine B were found to migrate from the soda to the straws. Particularly interesting was the migration of bis(2-ethylbutyl)phthalate and dioctyl phthalate, both recognized as endocrine disruptors, and 4,4'-methylenedianiline, a primary aromatic amine and suspected carcinogen, which had a migration concentration into the soda surpassing the specific migration limit set by Regulation (EU) No 10/2011. The study underscores that, despite straws not being made of plastic, several concerning compounds that migrated from them were additives commonly found in plastic products. This may suggest that paper straws may not be the safest alternative to plastic straws in terms of food safety.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Designing safe recycled high-density polyethylene (HDPE) for child toys

  • Vera, Paula
  • Canellas, Elena
  • Nerín, Cristina
New high-density polyethylene (HDPE) manufactured from different percentage of post-consumer recycled HDPE milk bottles was studied through two static and dynamic migration tests using saliva simulant to assess the potential hazard to children. Sixty-nine compounds were identified, including several additives used in PE synthesis such as alkanes, alkenes, antioxidants and plasticizers as well as non-intentionally added substances (NIAS) like degradation products such as 2,6-di-tert-butyl-1,4-benzoquinone, 2,4-di-tert-butylphenol, phenol, 2,5-bis(1,1-dimethylethyl)-, 3,5-di-tert-butyl-4-hydroxybenzaldehyde, and 3,5-di-tert-butyl-4-hydroxyacetophenone, or various residues from flavoring agents, cleaning products and essential oils. Some of these compounds as the isomers p and o t-butylcyclohexyl acetate, 3-Octanol, 3,7-dimethyl- and thujanol acetate (3-) pose a potential risk to children, as their concentrations exceed the recommended Cramer values for high percentages of recycling. This suggests improving recycling processes by incorporating advanced cleaning to remove residual products and contaminants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Eugenol-based aluminium packaging: antibacterial performance for cooked ham and cheese preservation and risk assessment for consumer safety

  • Orlo, Elena
  • Nerín, Cristina
  • Wrona, Magdalena
  • Buonocore, Giovanna Giulina
  • Nugnes, Roberta
  • Chiara, Russo
  • Di Matteo, Angela
  • Lavorgna, Margherita
  • Isidori,Marina
Food contamination and spoilage compromise both safety and commercial value, highlighting the need for innovative preservation technologies. In this study, two vinyl resin coatings were applied to flexible aluminum foil to develop novel antimicrobial packaging materials: one containing free eugenol and the other incorporating eugenol-loaded Santa Barbara Amorphous-15 (SBA15) mesoporous silica particles. Material safety for food contact was assessed through migration tests following European Regulation 10/2011 using 10 % and 95 % ethanol, as food simulants, for 10 days at 20 °C. While overall migration confirmed the compliance of both materials, specific migration analysis demonstrated that only the eugenol-loaded SBA15 coating met regulatory safety limits, making it the only suitable candidate for food packaging. The antimicrobial performance of this optimized coating was evaluated against Escherichia coli, Staphylococcus aureus, and mesophilic aerobic flora in Taleggio cheese and cooked ham stored at 5 °C for 10 days. The highest bacterial reduction was observed for S. aureus, with 2.77 log CFU/g and 2.13 log CFU/g decreases in Taleggio cheese and cooked ham, respectively. Sensory analysis confirmed that the coating did not significantly alter the organoleptic properties of the cheese.These findings underscore the potential of eugenol-functionalized SBA15 aluminum packaging as a safe and effective solution for prolonging food shelf life, ensuring microbial safety while maintaining product quality.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Beyond direct contact: Chemical migration from external printed components of tea packaging into infusions assessed by UPLC-IM-QTOF analysis

  • Canellas, Elena
  • Nerin, Cristina
  • Vera, Paula
The safety of food packaging has traditionally focused on materials in direct contact with food, often neglecting the potential contribution of printed external components. This study investigates the migration of chemical substances from non-food-contact elements of tea bag packaging—such as printed labels and external wrappers—into tea infusions prepared under realistic conditions. Migration was simulated by immersing both tea bags and their associated printed materials in boiling water. Extracts were analyzed using ultra-performance liquid chromatography coupled with ion mobility–quadrupole time-of-flight mass spectrometry (UPLC-IM-QTOF), enabling sensitive and multidimensional profiling of known and unknown migrants. Concentrations of identified substances ranged from 5.7 to 369 ng/g, with compound-specific detection limits spanning 1.1–12.3 ng/g. Principal Component Analysis (PCA) revealed that ink and varnish formulations contributed significantly to the variation in migration profiles among brands, despite identical tea compositions. Compounds such as hexadecyl methacrylate and benzophenone were uniquely associated with specific packaging types, while ubiquitous substances like acetyl tributyl citrate and erucamide indicated common ink usage. Notably, several potential endocrine disruptors were detected, although all migration levels remained below current regulatory limits. These results emphasize the importance of including all packaging layers in safety assessments and demonstrate the utility of UPLC-IM-QTOF for comprehensive non-targeted migration analysis.