Skip to main content

ANALISIS DEL CICLO SISMICO A LARGO PLAZO A PARTIR DE DATOS GEOLOGICOS Y MODELADO

PID2021-124155NB-C31

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RIO. Repositorio Institucional Olavide
Publication Artículo científico (JournalArticle)

Unsteady transpression: How progressive variations in kinematic vorticity influence finite strain in shear zone evolution, Transpresión no estacionaria: cómo variaciones progresivas en la vorticidad cinemática afectan a la deformación finita en la evolución de zonas de cizalla

  • Alonso-Henar, Jorge
  • Fernández, Carlos
  • Díaz Azpiroz, Manuel|||0000-0003-4038-7599
  • Druguet, Elena
Natural shear zones usually follow unsteady deformation histories. Concerning transpression zones, it is expected that the vorticity of the flow will vary not only in space but also in time. This work presents a study of unsteady flows that considers two ideal extreme cases: one, here named Type i, in which the vorticity increases with time, from virtual pure to simple shearing (Wk = 0.01 to 0.999), and another, Type d, in which vorticity decreases with time, from virtual simple to pure shearing (Wk = 0.999 to 0.01). To tackle the issue of vorticity changes during progressive strain, we modeled the evolution of a vertical transpression zone with left lateral movement and vertical extrusion, considering four basic types of shear zone growth. The results show that, in many cases, the resulting fabrics are difficult to distinguish from those of a steady flow. There are situations, however, in which the pattern of foliations, the orientation of stretching lineations, or an abnormally high magnitude of local noncoaxiality may be criteria to identify the unsteady character of the flow. Under Type i flows, the spin undergone by the instantaneous stretching axes, antithetic to the rotation imposed by the vorticity vector, should have consequences in an exceptionally high non-coaxiality of the fabric, and can induce an antithetic rotation of the foliation. In some cases, the resulting foliation pattern can be sigmoidal, whose tips indicate the direction of relative displacement of the adjacent blocks. Other pieces of evidence detected in the fabric patterns that may indicate unsteadiness in the flow are: a) zones with low deformation intensity that nevertheless show lineations parallel to the extrusion direction; b) local zones of very high non-coaxiality (reflected in rock fabrics - high asymmetric porphyroclasts or CPOs), higher than that imposed by the total vorticity; and c) the coexistence of mutually orthogonal stretching lineations without evidence of steady deformation trajectories to justify it. Our model also suggests that, when temporal strain partitioning is identified in a shear zone, the main evidence of unsteadiness of the flow would be found in bands where the non-coaxial component is eventually concentrated. For the rest of the shear zone, the variations in strain trajectories are so small compared to those of steady flows that the assumption that the flow is steady may be considered valid. We have tested the model into two natural shear zones: one where vorticity increase has been already noticed (Balaram Shear Zone in the northwestern part of the Indian Peninsula) and another one where unsteady transpression is presented as a simpler explanation than the provided steady analytic models (a high strain zone in Cap de Creus, Eastern Pyrenean Axial Zone).
RIO. Repositorio Institucional Olavide
Publication Artículo científico (JournalArticle)

General transpression and transtension, Transpresión y transtensión generales

  • Fernández, Carlos
  • Díaz Azpiroz, Manuel|||0000-0003-4038-7599
  • Alonso-Henar, Jorge
In this work, a triclinic transpression and transtension model is presented in which the coaxial part of the flow is general, including both constriction and flattening as well as pure shear. The results show that, for both transtension and transpression, the different combinations of the variables that control the model allow obtaining finite strain ellipsoids in all fields of the deformation diagram, including prolate and oblate ellipsoids. It is mainly the ζ angle between the simple-shearing direction and the extrusion (transpression) or sinking (transtension) direction, together with the value of the vorticity, and the characteristics of the coaxial part of the flow, which controls the shape of the finite strain ellipsoid in each case. The orientations of the principal axes (X, Y, Z) of the finite strain ellipsoids show a wide variation, also dependent on ζ. The model has been applied to natural examples, improving the knowledge of their kinematic evolution and tectonic interpretation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluation of road network slopes susceptibility to seismically-induced landslides in the Granada Basin (S Spain)

  • Román-Herrera, José C.
  • Delgado, Jose
  • Rodríguez-Peces, Martín Jesús
  • Peláez Montilla, José Antonio
  • Garrido Manrique, Jesús
  • Delgado, Jose|||/items/23421faf-57a5-44ec-a169-eadbf91c5ae5
In this work, a method for the fast evaluation of seismically-induced landslides is applied at regional scale in the Granada Basin (southern Spain). The methodology is based on the concept of rigid block but takes into account the variability in input data (geotechnical properties, failure depth and saturation state of the materials) through the use of a logical tree scheme. Input data were combined and evaluated using five different Newmark displacement empirical relations, which are automatically weighted to obtain a final co-seismic landslide susceptibility map. A Geographic Information System system was used to obtain the resulting maps considering the different branches and weights of the logic tree through an specifically developed automatic code written in Phyton. The landslides induced by the 2021 Mw 4.4 events of the Santa Fe seismic series have been used to validate the methodology. This is later used as input along with the road network to analyze the distribution of areas of different susceptibility level. The results obtained show that 1.73% of the total area is characterized by moderate to high susceptibility, being the southern and eastern sections of the Granada basin were more vulnerable slopes are found. When considering only zones around the road network (50 m buffer), it is found that 2.11% of slopes around highways and 1.33% of road slopes have moderate to high susceptibility, especially the A-92 highway and the A-338 road. These roads traverse areas with steep slopes and a combination of hard and soft materials, which increases the susceptibility of disrupted landslides. On the other hand, in more densely populated areas such as the metropolitan area of Granada, the susceptibility is lower due to their location on terrain with low to negligible slopes. The results are of interest for authorities managing slope stabilities because they allow establishing effective and locally-based seismic forecast works in order to minimize the damage of future events.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Constraining earthquake fault sources through the use of intensity data and seismic scenarios: application to the Betic Cordillera (South Spain)

  • de Pro Díaz, Yolanda
  • Perea, Héctor
  • Insúa Arévalo, Juan Miguel
  • Martínez-Díaz, J. J.
  • Canora Catalán, Carolina
20 pages, 12 figures, 3 tables.-- Data availability statement: Publicly available datasets were analyzed in this study. This data can be found here: https://doi.org/10.1016/j.tecto.2012.04.010 https://www.ign.es/web/libros-digitales/terremotos-almeria-1804 http://e-spacio.uned.es/fez/view/bibliuned:grupinvestGAMA-Libros-Jlario-0001, Macroseismic observations can be useful to study pre-instrumental earthquakes when paleoseismological analysis are not viable for various reasons (e.g., erosion or lack of sedimentation). The analysis of the distribution of the macroseismic intensity data points and the reports about geological effects has been shown as a tool that may provide meaningful information to localize the fault source of a historical earthquake. Using this approach, we have studied two earthquakes in the Betic Cordillera (South Spain), the 1804 Dalías and the 1680 Málaga events, and we have used the 2011 Lorca earthquake as a test subject to calibrate the methodologies. During the calibration process, we also find the best performing combination of ground-motion models and ground-motion-to-intensity-conversion equations for generating seismic scenarios in this area. Even though the results for the Málaga earthquake were not conclusive, our methodology successfully identified the most likely source for the Dalías earthquake: a conjunct rupture of the Loma del Viento and Llano del Águila Faults, This research was supported by the grants STRENGTH (PID2019-104668RB-I00) and Model_SHaKER (PID2021-124155NB-C31) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This project acknowledges the “Severo Ochoa Centre of Excellence“ accreditation (CEX2019-000928-S) and the grant UNrIDDLE (2018-T1/AMB-11039) “Atracción de Talento Investigador” call 2018 funded by Comunidad de Madrid. YPD was a fellow researcher at the Universidad Complutense de Madrid under a Predoctoral Research Contract (2019/2020), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Seismogenic potential and tsunami threat of the strike-slip Carboneras fault in the western Mediterranean from physics-based earthquake simulations

  • Álvarez Gómez, José Antonio
  • Herrero-Barbero, Paula
  • Martínez-Díaz, J. J.
Strike-slip fault ruptures have a limited capacity to generate vertical deformation, and for this reason they are usually dismissed as potential destructive tsunami sources. At the western tip of the western Mediterranean, in the Alboran Sea, tectonics is characterized by the presence of large transcurrent fault systems and minor reverse and normal faults in a zone of diffuse deformation. The strike-slip Carboneras fault is one of the largest sources in the Alboran Sea and therefore with the greatest seismogenic capacity. It is also one of the active structures with higher slip rates in the eastern Betic fault zone and has been proposed as the source of the damaging 1522 (M 6.5; Int. VIII-IX) Almeria earthquake. The dimensions and location of the Carboneras fault imply a high seismic and tsunami threat. In this paper we present tsunami simulations from seismic sources generated with physics-based earthquake simulators. We have generated a 1ĝ€¯Myr synthetic seismic catalogue consistent on 773ĝ€¯893 events, with magnitudes ranging between Mw 3.3 and 7.6. From these events we have selected those sources producing a potential energy capable of generating a noticeable tsunami, those sources being earthquakes with magnitudes ranging from 6.71 to 7.62. The Carboneras fault has the capacity to generate locally damaging tsunamis; however, on a regional scale its tsunami threat is limited. The frequency-magnitude distribution of the generated seismic catalogue reflects the variability of magnitudes associated with the rupture of the entire fault, departing the upper limit from the classical Gutenberg-Richter potential relation. The inter-event time for the maximum earthquake magnitudes is usually between 2000 and 6000 years. The use of physics-based earthquake simulations for tsunamigenic sources allows an in-depth characterization of the scenarios, allowing a qualitative leap in their parametrization., This research has been supported by the Ministerio de Ciencia e Innovación (grant no. PID2021-124155NB-C31).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deterministic seismic hazard analysis from physics-based earthquake simulations in the Eastern Betics (SE Iberia)

  • Herrero-Barbero, Paula
  • Álvarez Gómez, José Antonio
  • Tsige, Meaza
  • Martínez-Díaz, J. J.
The low frequency of large destructive earthquakes in the Eastern Betics (SE Iberian Peninsula), not recorded in the instrumental seismic catalog, complicate the estimation of the maximum ground motion that could be reached. Knowing the characteristics and behavior of these large seismic ruptures is crucial for the study of seismic hazard. In this work, we have used a physics-based earthquake simulator to generate a 100 kyr catalog of seismic ruptures associated with seismogenic faults bordering the quaternary Guadalentin and Bajo Segura basins. From these ruptures, we have selected maximum earthquake scenarios, and those associated with certain probabilities of exceeding a severe magnitude from the synthetic catalog. The estimation of maximum peak accelerations (PGA) by means of ground motion prediction equations include a possible site amplification that we have calculated from a detailed geotechnical classification of soils. According to the simulations, the modeled faults have the capacity to generate maximum earthquakes with magnitudes ranging MW 6.7–7.4. Densely populated urban areas located along the Guadalentin valley, such as Lorca, could be subject to site-dependent PGA values close to 0.6 g on the Alhama de Murcia fault trace. Similar ground motion would affect the coastline of SE Alicante province when evaluating the maximum simulated event in the Bajo Segura offshore fault. But already from magnitudes around MW ∼ 6, PGA estimations exceed critical values of 0.5 g at the south side of the Bajo Segura basin and the city of Murcia, highly dependent of ground-motion amplification induced by thick deposits of very soft and saturated soils. Our scenarios reflect that other factors such as fault geometry, kinematics and the capability observed in the simulations to generate multi-fault ruptures also affect the spatial distribution of maximum ground motion in this region. We expect that this evaluation could contribute as an improvement guideline for future strong motion prediction studies prior to the settlement of new urban infrastructures in the Eastern Betics., This study was supported by the SHaKER project (PID2021-124155NB-C31) funded by the Ministry of Science and Innovation of Spain. P. Herrero-Barbero thanks the funding support from a Spanish FPU Fellowship. We thank C. Williams, P. Villamor and K. Richards-Dinger for their contribution to physics-based modeling with RSQSim, and J.M. Insua, J. Alonso and J. Mayordomo for their suggestions with the fault data review and the GMPE selection. The authors greatly appreciate the detailed comments and suggestions from the Editor and two anonymous reviewers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New 3D Velocity Model (mTAB3D) for Absolute Hypocenter Location in Southern Iberia and the Westernmost Mediterranean

  • Sánchez-Roldán, José Luis
  • Álvarez Gómez, José Antonio
  • Martínez Díaz, J. J.
  • Herrero-Barbero, Paula
  • Perea, Héctor
  • Cantavella, Juan V.
  • Lozano, Lucía
21 pages, 8 figures, 3 tables, supporting information https://doi.org/10.1029/2023EA002993.-- Data Availability Statement: Earthquake phase arrival seismic stations data set was accessed through the Spanish Seismic Network (IGN, 2020; last accessed December 2022). Focal mechanisms were obtained from the Spanish Seismic Network seismic moment tensor catalog (IGN, 2022; last accessed December 2022). Main active faults traces are from QAFI v.4 (IGME, 2022; last accessed December 2022). Geophysical Information System available from Instituto Geológico y Minero (IGME, 2017; last accessed December 2017). Nonlinloc software can be accessed through its GitHub repository (Lomax, 2023; Last accessed February 2023). Figures and maps were built using the Generic Mapping Tools software (Wessel et al., 2019). This manuscript was written using LibreOffice Writer (The Document Foundation, 2020; last accessed February 2023). Supplementary material for this article includes tables and text with the summary of data used and the procedure to build mTAB3D. Raw grid files and metadata of mTAB3D model are available at Sánchez-Roldán et al. (2024a). Relocated catalogs (Files S1–S8) can be found at Sánchez-Roldán et al. (2024b), The Trans-Alboran Shear Zone is one of the most seismically active areas in the westernmost Mediterranean, where a wide variety of tectonic domains have developed within the context of oblique convergence between Eurasia and Africa plates. In this region, earthquakes occur close to seismogenic structures, some of them large enough to cause damaging events. In addition, the diversity of tectonic domains implies a lateral variation of seismic wave propagation, which could affect the hypocenter reliability if not addressed during the location procedure. We present mTAB3D, a new 3D P-wave velocity created after data collection, geometry modeling and velocity estimation in our study area. To test this model, we used arrival times from the Spanish Seismic Network catalog and performed two non-linear absolute hypocenter inversions: the first comprises all the seismicity detected during 2018–2022 in the Eastern Betics Shear Zone; the second one consists of the earthquakes recorded during the Al-Hoceima seismic sequence (2016). We compare our results against hypocenters computed with a 1D velocity model of the region (mIGN1D) and observe that mTAB3D achieves better clustering near active structures and lower epicentral uncertainties (up to 11% lower). Moreover, hypocenters obtained with mTAB3D show notable reliability even in scenarios of a low azimuthal gap, such as the 2016 Al-Hoceima sequence. The new catalogs computed with our model help us to infer possible genetic relations between seismicity and source faults within our study area and can be used as an additional tool when looking into prior seismic sequences, This research was supported by Grant STRENGTH (PID2019-104668RB-I00) funded by MCIN/AEI/10.13039/501100011033 and Grant Model_SHaKER (PID2021-124155NB-C31) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” The author JLSR owns a predoctoral research grant (FPI ref. PRE2018-083913) funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Open access publishing facilitated by Anelis Plus (the official name of “Asociatia Universitatilor, a Institutelor de Cercetare – Dezvoltare si a Bibliotecilor Centrale Universitare din Romania”), as part of the Wiley - Anelis Plus agreement, With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Propuesta de parametrización de la medida "distancia a la falla" para la aplicación práctica del proyecto de norma de construcción sismorresistente NCSR-23, Proposal for parametrizing the "distance to fault" measure for practical application of the NCSR-23 seismic-resistant building draft code

  • Álvarez Gómez, José Antonio
  • Herrero-Barbero, Paula
  • Perea, Héctor
  • Gómez-Novell, Octavi
  • Martín Banda, Raquel
  • García Mayordomo, Julián
  • Gaspar Escribano, Jorge
  • González, A.
  • Khazaradze, Giorgi
XI Congreso Geológico de España, 2-6 de julio 2024, Ávila.-- 3 pages, 2 figures, [EN] Both the European earthquake-resistant building codes (Eurocode-8) and the draft of the new Spanish earthquake-resistant building code (NCSR-23) consider the presence of active faults in the design. The NCSR-23 includes the distance to the fault as a fundamental design parameter for general buildings and for special-importance structures, such as bridges and pipelines. In the draft NCSR-23, fault distances are defined to take into account near-field effects in the ground motion levels, as well as to assess potential surface rupture (permanent surface deformation). To provide an earthquake geology perspective on the use of fault distance we have assessed the sensitivity of the required distances to fault traces contained in the QAFI (v4) database. We have also evaluated the permanent deformation expected at the surface by fault rupture with elastic dislocation models in order to assess the minimum safety distance to the fault trace. We have foun that the geometry at depth of the fault, as well as its kinematics (slip and rake), are of particular importance, so a thorough review of these parameters in the active fault database is recommended, [ES] Tanto las normas sismorresistentes europeas (Eurocódigo-8), como el proyecto de nueva norma de construcción sismorresistente española (NCSR-23) contemplan la presencia de fallas activas en el diseño. La NCSR-23 incluye la distancia a la falla como parámetro de diseño fundamental para edificación general y para estructuras singulares, como puentes y tuberías. En el proyecto de NCSR-23 se definen distancias a las fallas para considerar efectos de campo cercano en los valores del movimiento fuerte del terreno, así como, para la consideración de su potencial ruptura en superficie. Para aportar una visión desde el punto de vista de la geología de terremotos a la utilización de estas distancias hemos evaluado la sensibilidad de las distancias requeridas a las trazas de las fallas contenidas en la base de datos QAFI (v4). También hemos evaluado las deformaciones permanentes esperables en superficie por roturas de falla mediante modelos de deformación elastica con el fin de analizar la distancia de seguridad mínima a la traza de la falla. Hemos comprobado como la geometría en profundidad de la falla, así como su cinemática (deslizamiento y cabeceo), son de especial importancia, siendo recomendable una revisión a fondo de estos parámetros en la base de datos de fallas activas, Los autores, que provienen principalmente de las comunidades Iberfault (https://iberfault.org) y Fault2SHA (https://fault2sha.net), cuentan con la financiación de los siguientes proyectos de investigación: IJC2020-043372-I (financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR), model_SHaKER (PID2021-124155NB-C31), STRENGTH (PID2019-104668RB-I00) y NSOURCES (PID2020-119772RB-I00) financiadas por MCIN/AEI/10.13039/501100011033. [...] With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Consistency of seismic hazard estimates from a physics-based earthquake simulator: a case study in south-eastern Spain

  • Gómez Novell, Octavi
  • Visini, Francesco
  • Herrero-Barbero, Paula
  • Álvarez Gómez, José Antonio
  • García Mayordomo, Julián
[EN] Estimating seismic hazard is crucial for enhancing societal resilience and risk mitigation strategies. Probabilistic Seismic Hazard Analysis (PSHA) is the current standard framework, traditionally relying on empirical earthquake rupture forecasts (ERFs) and ground-motion models. In this framework, physics-based earthquake cycle simulators are emerging as powerful tools in PSHA, capable of replicating observed seismicity and seismic hazard statistics. Here, we present a quantitative consistency evaluation of physics-based PSHA models at the Eastern Betic Shear Zone in south-eastern Spain against both historical macroseismic intensity data and instrumental ground shaking records. We use synthetic catalogues from RSQSim earthquake-cycle simulations to construct two physics-based ERFs that we pipeline into a PSHA calculation. Results indicate that the physics-based ERFs derived from the best-performing simulation model, previously ranked against empirical benchmarks, achieve the best overall agreement with observed macroseismic intensities and acceleration records at 10 sites, outperforming both the lower-performing simulation and a traditional area-source model. Our findings highlight that the incorporation of physics-based models into PSHA is appropriate, inherently enabling the inclusion of fault-system rupture complexity and interactions, all key challenges in PSHA. We also advocate for the hybridization of physics-based models with traditional approaches in PSHA to better capture epistemic uncertainties in the hazard representation., This research work was funded by the European Commission – NextGenerationEU, through Momentum CSIC Programme: Develop Your Digital Talent (project GDxGT; ref. MMT24-IGME-02) and by the Model_SHaKER project (ref. PID2021-124155NB-C31) funded by Spanish State Research Agency. Julián García-Mayordomo is supported by the NSOURCES project (ref. PID2020119772RB-I00) funded by Spanish State Research Agency. Paula Herrero-Barbero is supported from a Juan de la Cierva fellowship funded by the Spanish Ministry of Science, Innovation and Universities. The article processing charges for this open-access publication were covered by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coseismic surface rupture probabilities from earthquake cycle simulations: influence of fault geometry

  • Gómez Novell, Octavi
  • Visini, Francesco
  • Álvarez Gómez, José Antonio
  • Pace, Bruno
  • García Mayordomo, Julián
[EN] Earthquake surface ruptures are a significant hazard for critical infrastructure and society. Probabilistic Fault Displacement Hazard Analysis (PFDHA) uses empirical and numerical models to estimate the surface rupture likelihood as the first component. However, empirical datasets are often incomplete and limited to few geodynamic settings, reducing their accuracy for site-specific analyses. Moreover, existing models do not capture the influence of physical fault parameters, such as geometry, on surface rupture occurrence nor its spatial variability. We use the RSQSim rate-and-state earthquake simulator to simulate seismicity across twelve alternative geometries of a test fault that incorporate variations of fault connectivity at depth, dip and fault trace sinuosity, aiming for a systematic evaluation of their influence on the probability of primary surface rupture and its spatial variability. Our results show that fault geometry is key in controlling the probability of surface rupture. Models with fault connectivity at depth and greater fault trace sinuosity yield higher probabilities than their counterparts. Conversely, disconnected models limit rupture propagation across segments, reducing surface rupture capability in specific fault regions. This study demonstrates the importance of considering fault geometry when assessing seismic hazards and confirms that earthquake cycle simulators offer a robust tool for next generation PFDHA models., This research work was funded by the European Commission – NextGenerationEU, through Momentum CSIC Programme: Develop Your Digital Talent (project GDxGT; ref. MMT24-IGME-02), by the Model_SHaKER project (ref. PID2021‐124155NB‐C31) funded by Spanish State Research Agency, and by the TREAD project (daTa and pRocesses in sEismic hAzarD), funded by the European Union under the Horizon Europe programme: Marie Skłodowska-Curie Actions (MSCA) with grant agreement no. 101072699. Octavi Gómez-Novell is staff hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union's Next Generation funds. The article processing charges for this open-access publication were covered by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed