Skip to main content

NUEVAS SOLUCIONES TECNOLOGICAS DE COMPONENTES PASIVOS DE ALTAS PRESTACIONES PARA SISTEMAS DE COMUNICACIONES ESPACIALES

PID2022-136590OB-C43

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of Low-Pass Corrugated Filters Based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Seller Rueda, Antonio
  • Gimeno-Nieves, Encarnación
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, low-pass corrugated filters based on half-mode groove gap waveguide (HMGGW) technology are proposed for the first time. The design process starts from the equivalent classical low-pass implementation in corrugated rectangular waveguide. Then, the final response is achieved after a slight re-optimization of groove widths and lengths. As a proof of concept, two corrugated low-pass filters with upper cutoff frequencies at 27 and 29.5 GHz, and maximum attenuation rejection at 34.5 and 39 GHz, respectively, have been designed and manufactured. In spite of the frequency range of operation, the return losses are better than 19.5 dB for both tuning less filter prototypes, while measured insertion losses are lower than 0.25 dB and 0.3 dB, respectively, in almost the entire passband. The very good agreement between simulations and measurements fully validates the use of this new emerging technology for the implementation of low-pass filters at high frequency bands., This work was funded by MCIN/AEI/10.13039/501100011033 and by FEDER, a way of making Europe, through Subprojects C43, and C41 of the Coordinated Projects PID2022-136590OB
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ka-band diplexer design based on half-mode groove gap waveguide

  • Marini, Stephan
  • Morales-Hernández, Aitor
  • Gimeno-Nieves, Encarnación
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper shows the practical design of a Ka-band tuning-less diplexer in half-mode groove gap waveguide (HM-GGW) technology for multi-beam satellite applications. This new technology can be easily manufactured, since it lets the design of two separate metallic pieces: one for the cover with periodic pins, and another one for the half-groove gap waveguide structure. The proposed diplexer is composed of two bandpass HM-GGW filters, an H-plane T-junction and the corresponding transitions to the input/output WR28 rectangular ports. To illustrate how this technology can be applied, a prototype has been successfully fabricated, showing in-band measured return and insertion losses of 21 dB and 0.87 dB in the lower band, 16 dB and 0.86 dB in the upper band, and a good isolation level (better than 32.5 dB) in the whole operational frequency range., This work was supported by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , through the Sub-Projects C43 and C41 of the Coordinated Projects PID2022-136590OB, and by the University of Alicante, Spain under the project GRE20-06A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, S.
  • Garcia, R.
  • Coves, Angela
  • Garcia, J.M.
  • San-Blas, A. A.
  • Sancho, M.
  • Sánchez-Soriano, M. A.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Projects PID2022-136590OB (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B (under grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR) . JMGB thanks the European Research Council grant ERC-2018-StG-802836 (AxScale project) , and the Lise Meitner program "In search of a new, light physics" of the Max Planck society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García, R.
  • San-Blas, A. A.
  • Bonte, S.
  • Coves, A.
  • Sánchez-Soriano, M. A.
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Projects PID2022-136590OB (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021- 129196B (under Grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR), and in part by Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental validation of corrugated surface profiles for multipactor mitigation in gap waveguide technology

  • Bonte, S. M.
  • Coves, A.
  • San-Blas, A. A.
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work presents the design, fabrication, and experimental validation of corrugated surface profiles to mitigate the multipactor effect in gap waveguide technology. Two representative structures-a ridge gap waveguide (RGW) section and a groove gap waveguide (GGW) bandpass filter-are investigated. Corrugations are introduced in regions of maximum electric field to disrupt electron trajectories and increase the multipactor threshold power. A comprehensive study combining full-wave electromagnetic simulations and particle tracking is carried out to evaluate their impact on RF performance and multipactor susceptibility. Different corrugation configurations are assessed to achieve an optimal trade-off between improved power-handling capability and minimal electrical degradation. Prototypes are manufactured using standard CNC milling and experimentally tested under high-power vacuum conditions. Results show a significant increase in multipactor threshold power (about 1.5-2 kW) in both RGW and GGW structures, while maintaining low insertion loss and high return loss. The good agreement between simulations and measurements confirms the effectiveness of this simple, passive, and effective solution for enhancing the power-handling capability of gap waveguide components. The main contribution of this work is the application of corrugated profiles for multipactor mitigation, along with its experimental validation using practical RGW and GGW components., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Project PID2022-136590OB and by European Social Fund+ (ESF+). *
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical and Experimental Results for Multipactor Effect in Groove Gap Waveguide Bandpass Filters with Inductive Coupling Irises

  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Asensio, Irene
  • Coves Soler, Ángela
  • San Blas Oltra, Ángel Antonio
[EN] This article presents the theoretical study and experimental validation of the multipactor (MP) effect in bandpass filters implemented in groove gap waveguide (GGW) technology. Such filters are based on rectangular cavities and inductive coupling irises, whose optimized dimensions (widths and lengths) are fixed between rows of metal pins. For the effective design of the considered GGW filter, an equivalent counterpart in standard rectangular waveguide (RW) technology will be first studied, using very efficient tools for computing its electrical response and MP discharge breakdown levels. Two prototypes of the GGW and RW bandpass filters, designed to operate at 17.5 GHz (for Ka-band satellite downlink applications), are manufactured for validation and comparison purposes. Both of them are made of aluminium material, whose properties (in terms of secondary electron emission) have also been measured, as well as considered in the prediction of MP threshold levels using available software tools. Proceeding in this way, an outstanding matching between all simulated and experimental results of the MP effect has been achieved., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the Research and Development Project PID2022-136590OB through Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE), under Grant AEI/10.13039/501100011033; in part by the Project TED2021-129196B through Unión Europea NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia (PRTR) under Grant 10.13039/501100011033; and in part by the Conselleria de Educación, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mitigation of Corona Discharge Breakdown in ESIW Bandpass Filters

  • Seller-Rueda, Antonio
  • Marini, Stephan
  • Herraiz, Darío
  • Belenguer, Ángel
  • Esteban González, Héctor
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this work, corona discharge breakdown thresholds in empty substrate integrated waveguide (ESIW) bandpass filters are investigated and experimentally validated for the first time. The objectives are the analysis and subsequent enhancement of the peak power handling capability (PPHC) of inductive ESIW filters operating in low-pressure environments, where gas breakdown may limit the maximum admissible RF power level. First, the critical regions where the electric field (EF) reaches its maximum amplitude are identified by full-wave electromagnetic (EM) simulations. Then, an enhancement strategy based on the introduction of drilled apertures in the ESIW covers is applied, in order to reshape the field distribution in the most critical zones without compromising the in-band response. The results show a consistent increase in the corona discharge threshold at low pressure, between 2 and 3.1dB, with respect to a reference ESIW bandpass filter of the same electrical specifications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, Sarah
  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • García Barceló, Jose María
  • San Blas Oltra, Ángel Antonio
  • Sancho, M.
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • Boria Esbert, Vicente Enrique
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García Jiménez, Raúl
  • San Blas Oltra, Ángel Antonio
  • Bonte, Sarah
  • Coves Soler, Ángela María
  • Sánchez-Soriano, Miguel Ángel
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Low-Loss Periodically Air-Filled Substrate Integrated Waveguide (SIW) Band-Pass Filters

  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • Herraiz, Darío
  • San Blas Oltra, Ángel Antonio
  • Bozzi, Maurizio
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The electrical response of low-frequency band-pass filters based on periodic substrate integrated waveguide (SIW) technology typically shows permitted and forbidden frequency bands. Therefore, this type of filters can be designed using a conceptually very simple and efficient procedure based exclusively on the study of the dispersion properties of the periodic structure. In this paper, we go a step further with the design of a periodically air-filled SIW band-pass filter in which part of the dielectric substrate is removed to reduce insertion losses, and whose unit cell parameters, which are directly related to the center frequency ( fc ) and bandwidth (BW) of the first passband, and also to the first stopband or bandgap (BG) of the structure, have been appropriately selected for filtering purposes, thus providing some useful design rules. Furthermore, we apply the concept of glide symmetry for achieving a much larger fractional bandwidth (FBW) than that obtained in conventional air-filled SIW filters found in the technical literature. Finite implementations of both periodic structures with and without glide symmetry have been analyzed, showing their filtering response for validation purposes. Additionally, to overcome the matching level restrictions in the resulting air-filled periodic SIWs, a microstrip-to-SIW transition including a novel coupling iris is proposed. A prototype of the proposed air-filled glide-symmetric periodic SIW filter has been manufactured and experimentally validated, illustrating the potential of this technique to obtain large FBWs that can not be achieved in conventional air-filled SIW filters. The proposed filter proves to be a good candidate for millimeter wave applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ka-band diplexer design based on half-mode groove gap waveguide

  • Marini, Stephan
  • Ferrando-Rocher, Miguel
  • Morales-Hernández, Aitor
  • Gimeno, Encarnación
  • López, Alejandro Jorge
  • Boria Esbert, Vicente Enrique
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
This paper shows the practical design of a Ka-band tuning-less diplexer in half-mode groove gap waveguide (HM-GGW) technology for multi-beam satellite applications. This new technology can be easily manufactured, since it lets the design of two separate metallic pieces: one for the cover with periodic pins, and another one for the half-groove gap waveguide structure. The proposed diplexer is composed of two bandpass HM-GGW filters, an H-plane T-junction and the corresponding transitions to the input/output WR28 rectangular ports. To illustrate how this technology can be applied, a prototype has been successfully fabricated, showing in-band measured return and insertion losses of 21 dB and 0.87 dB in the lower band, 16 dB and 0.86 dB in the upper band, and a good isolation level (better than 32.5 dB) in the whole operational frequency range.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design of Low-Pass Corrugated Filters Based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Seller-Rueda, Antonio
  • Soto Pacheco, Pablo
  • Gimeno, Encarnación
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this paper, low-pass corrugated filters based on half-mode groove gap waveguide (HMGGW) technology are proposed for the first time. The design process starts from the equivalent classical low-pass implementation in corrugated rectangular waveguide. Then, the final response is achieved after a slight re-optimization of groove widths and lengths. As a proof of concept, two corrugated low-pass filters with upper cutoff frequencies at 27 and 29.5 GHz, and maximum attenuation rejection at 34.5 and 39 GHz, respectively, have been designed and manufactured. In spite of the frequency range of operation, the return losses are better than 19.5 dB for both tuning-less filter prototypes, while measured insertion losses are lower than 0.25 dB and 0.3 dB, respectively, in almost the entire passband. The very good agreement between simulations and measurements fully validates the use of this new emerging technology for the implementation of low-pass filters at high frequency bands.