Skip to main content

PRODUCCION DE HIDROGENO CON CAPTURA DE CO2 MEDIANTE LA MEJORA POR ABSORCION DEL REFORMADO DE MULTIPLES COMBUSTIBLES CON TRANSPORTADORES DE OXIGENO

PID2022-138085OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of hydrogen production from Sorption Enhanced Chemical Looping Reforming (SE-CLR) of methane

  • Obras-Loscertales, Margarita de las
  • Mendiara, Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
13 figures, 3 tables., The Paris Agreement in 2015 (COP21) [1] marks the way towards a Net Zero CO2 Emissions (NZE) scenery in order to limit the global temperature increase in this century to 2 °C while pursuing efforts to limit the increase to 1.5 °C above pre-industrial levels. In this scenery, greenhouse gas emissions must be reduced by 8% annually to achieve worldwide Net Zero by 2050 [2]. Additionally, these current climate and environmental challenges demand an urgent and ambitious response from Europe, which was recently defined in the European Green Deal [3] and European Climate Law [4]. The EU Climate Law writes into law the objective established in the European Green Deal referred to achieve the carbon neutrality by 2050. This law also sets the intermediate target of reducing net greenhouse gas emissions by at least 55% by 2030, compared to 1990 levels, turning the European Union into a leader in the global fight against Climate Change. To achieve that, higher shares of renewable energy are needed, with green hydrogen production being essential for decarbonizing parts of the economy that wind and solar are not able to do it, like high-heat industrial processes. Currently, nearly all hydrogen comes from the conversion of fossil fuels, with the steam methane reforming (SMR) of natural gas being the most relevant (76%) [5]. In SMR, methane is converted into CO and hydrogen using a Ni-based catalyst (R1). Then, H2 yield is increased by the CO conversion in a water-gas shift (WGS) reactor (R2) and separated from the other gases, e.g. by means of pressure swing adsorption (PSA). SMR is an endothermic process that requires the energy supply by burning additional natural gas, which implies the generation of a significant amount of CO2 that is not captured and thus, it is released into the atmosphere. The implementation of measures to avoid these emissions, e.g. capturing CO2 in the combustion gases or partial oxidation with oxygen, is costly which directly impacts on hydrogen production costs. An alternative to the SMR process is the Sorption Enhanced Steam Methane Reforming (SESMR) [6,7]. This process incorporates a CO2 sorbent together with the Ni catalyst so that the reforming (R1), the WGS reaction (R2) and the sorption of the CO2 generated during the process (R3) take place simultaneously in the reformer, improving the efficiency, conversion and yield to hydrogen. Once the sorbent is saturated in CO2, it is sent to a calciner reactor where it is regenerated (R4) releasing CO2. Therefore, a highly concentrated CO2 stream is obtained. Next, the regenerated sorbent is returned to the reformer to start over; see Figure 1a). In order to supply the energy needed for the process, a fraction of methane is burnt in oxy-fuel mode, i.e., using pure O2, so that CO2 can be captured and not emitted into the atmosphere. However, this process is associated with an increase in energy penalization because of the use of an Air Separation Unit (ASU). CH4 + H2O → CO + 3 H2 ΔH0= 205.9 kJ/mol (R1) CO + H2O ↔ CO2 + H2 ΔH0= -41.1 kJ/mol (R2) CaO + CO2 → CaCO3 ΔH0= -178.2 kJ/mol (R3) CaCO3 → CaO + CO2 ΔH0= 178.2 kJ/mol (R4), This work was supported by Gobierno de Aragón – Dpto. de Ciencia, Universidad y Sociedad del Conocimiento - Project LMP166_21 and by HYSERLOOP project, Grant PID2022-138085OB-I00 funded by MICIN/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy valorization of swine manure by oxygen carrier aided combustion (Ocac) with oxygen carriers based on natural ores

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
Abstract of the work presented at the 32nd European Biomass Conference and Exhibition 2024: 24-27 June 2024, Marseille, France: Setting the course for a biobased economy.-- Session reference: 4CV.3.7, The primary environmental impacts of swine manure, in both solid and liquid fractions, fundamentally arise from two sources: greenhouse gas emissions (GHGs) and the excessive accumulation of nutrients in the field. Therefore, the search for a suitable solution to this problem is of great importance. The energy valorization of the solid fraction of swine manure is an option with the potential to mitigate the environmental concerns associated with this residue. Among the new technologies for turning these wastes into energy, oxygen carrier aided combustion may be a promising alternative. In this work, experimental tests using swine manure as fuel in a 3kWth unit with different types of oxygen carrier have been performed. The employed oxygen carriers included a hematite mineral, a manganese ore and Ilmenite. The effects of temperature (800-900 ºC) and oxygen excess in the reactor (1-3vol% of O2) on the combustion efficiency and the nitrogenous compound emissions (N2, NH3, NOx) were analyzed. In general, high combustion efficiencies (87-98%) were reached an most nitrogen was converted into NO and N2., This work was supported by the HYSERLOOP project, Grant PID2022-138085OB-I00 funded by MICIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and project SWINELOOP, grant PID2019-106441RB-I00 founded by MCIN/AEI/10.13039/501100011033. Yldeney Domingos thanks to grant PRE-092769 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical looping reforming of bioethanol for hydrogen production: Modeling and design of the fuel reactor of a 350 MW unit

  • Obras-Loscertales, Margarita de las
  • Abad Secades, Alberto
  • de Diego Poza, Luis Francisco
  • Cabello Flores, Arturo
  • Ruíz, J. A. C.
  • García Labiano, Francisco
10 figures, 3 tables.-- Supplementary information available., Chemical Looping Reforming of bioethanol offers an efficient process for the production of high-quality syngas which may be easily integrated with CO2 capture technologies for the H2 production with negative CO2 emissions. In this work, the fuel reactor of a 350 MW Chemical Looping Reforming unit, fed with raw ethanol obtained after the first distillation, has been modeled. A macroscopic model was developed by integrating the fluid dynamics of a high-velocity fluidized bed with the kinetics of catalytic ethanol conversion. The Ni-based oxygen carrier exhibited sufficient catalytic activity and oxygen transport capacity to fully convert ethanol, with CO and H2 as the main gas products. Simulation work was done to evaluate the syngas production as a function of the operating conditions. Eventually, the basic parameters for the design of the fuel reactor are defined. Results from mass and enthalpy balances indicated that suitable conditions to maximize syngas yield (4.3 mol H2 per mole of bioethanol after WGS reactor) included a solids circulation of 1000 kg/s and a fuel reactor temperature of 800 °C. To support a suitable fluid dynamic, the cross area was fixed at 0.05 m2/MW, which defined an inlet gas velocity of 5.6 m/s and supported the desired solids circulation rate. The fuel reactor was set at 13.6 m height to accommodate the size of four cyclones, and a pressure drop value of 24 kPa is proposed to facilitate a suitable dense bed height of 0.5 m., This work was supported by Serviço Nacional de Aprendizagem Industrial, SENAI-DR/RN (Ref. 20194247) and by Grant PID2022-138085OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary material for Chemical looping reforming of bioethanol for hydrogen production: Modeling and design of the fuel reactor of a 350 MW unit [Dataset]

  • Obras-Loscertales, Margarita de las
  • Abad Secades, Alberto
  • de Diego Poza, Luis Francisco
  • Cabello Flores, Arturo
  • Ruíz, J. A. C.
  • García Labiano, Francisco
Under a Creative Commons BY NC ND 4.0 license., Supplementary Material provides information about the fluid dynamic of the fuel reactor from a CLR unit including the main expressions and calculations considered in the mathematical model. Moreover, mass and enthalpy balances introduced in the fuel reactor model from a CLR unit including the reaction mechanism for ethanol reforming are herein described. The model is implemented using Fortran® as a high-level programming language. Eventually, the design of the cyclones and a detailed description of the algorithm used to solve the program are included.-- 1. Fluid dynamic of the reactor: Fluid-dynamic of the dense phase. Fluid-dynamic of the diluted zone. 2. Ethanol conversion. Mass and enthalpy balances for CLR of bioethanol: Table SM1. Kinetic parameters considered in the FR model. Note that the kinetic constants. 3. Cyclone design: Table SM2. Main parameters for cyclone design. 4. Algorithm structure: Figure SM1. Algorithm used to solve the mathematical model of the CLR system., This work was supported by Serviço Nacional de Aprendizagem Industrial, SENAI-DR/RN (Ref. 20194247) and by Grant PID2022-138085OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed