Skip to main content

OPTIMIZACION NUMERICA Y EXPERIMENTAL PARA REDUCIR LA CONTAMINACION ACUSTICA DE UAVS

PID2022-142018OA-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical analysis of quad-rotor aerodynamic and aeroacoustic performance with automated trimming algorithm

  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Varela-Martínez, Pau
  • Brendan Hannu Patrick
[EN] The current work introduces a novel and affordable Computational Fluid Dynamics (CFD) methodology for the purpose of assessing the aerodynamic and aero-acoustic performance of multi-rotor systems under trimmed flight conditions. The approach couples a simple Proportional-Integral (P-I) based trim algorithm and steady state CFD solver to automate the process of determining the set of control variables that results in balanced flight conditions. The methodology¿s low computational cost is primarily achieved by including the rotors¿ effects on the flow field with actuator models. A partial validation of the rotor modeling approach in isolated hover conditions reveals slight discrepancies in the computed aerodynamic loads but good agreement with experimental results in terms of the prediction of tonal noise. The CFD procedure is subsequently applied to evaluate a quad-rotor Unmanned Aerial Vehicle¿s (UAV) performance in varied flight scenarios. The obtained results demonstrate that this automated approach effectively predicts quad-rotor performance trends, aligning with previously published data. Key findings include the fact that a hybrid over-mounted fore rotor and under-mounted aft rotor configuration negatively affects forward flight performance, and that the airframe¿s geometry and distribution around the Center of Gravity can have a significant impact on flight characteristics. Finally, comparisons between the automated trim procedure and manually imposed trim parameters in transient aero-acoustic simulations reveal a more accurate approximation of trim when using the automated method. The comparison additionally highlights the importance of simulating multi-rotor systems in physically representative flight conditions as notable differences in the UAV¿s acoustic footprint are observed between cases., The automatic trimming algorithm development was partly sponsored by grant PID2023-150573OB-I00 Design of advanced hydrogen fuel-cell powered aircraft targeting the deployment of sustainable and decarbonised air mobility (AURORA [40]) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU and by grant TED2021-131087A-I00 Digital models for the evaluation and reduction of acoustic pollution generated by UAS in urban environments (MODERA [20]) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The acoustic study performed in this work was partly sponsored by grant TED2021-131087A-I00 Digital models for the evaluation and reduction of acoustic pollution generated by UAS in urban environments (MODERA [20]) funded by MCIN/AEI/10.13039- /501100011033 and by the European Union NextGenerationEU/PRTR, as well as by grant PID2022-142018OA-I00 Experimental and Numerical Optimization to Lower UAV Acoustical pollution (ENOLA [41]) funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU. The work was also partially funded by the Universitat Politècnica de València through the Grant FPI-2022-S2-85552. The authors are grateful for the computational resources provided by the Sirius Scientific Computing Cluster at UPV. The authors also wish to acknowledge Mrs. Ada García-Cuevas for christening the aircraft. The authors additionally thank Mathys Ridet, Federico Nahuel Ramírez, José ángel Jarabo Ruiz, and Daniel Velasco Pérez for their help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing the Fidelity of Steady-State MRF Modeling for UAV Propeller Performance in Non-Axial Inflow

  • Aular-Diaz, Lorena Mercedes
  • Quintero-Igeño, Pedro-Manuel|||0000-0003-4373-2079
  • Navarro, Roberto|||0000-0003-2587-4954
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Prothin, Sebastien
[EN] The aerodynamic behavior of small-scale UAV propellers operating under non-axial inflow conditions poses a significant prediction challenge due to the presence of strong azimuthal asymmetries, inherently unsteady flow phenomena, and Reynolds number effects that dominate forward flight conditions. Although numerical models based on the Moving Reference Frame (MRF) formulation combined with steady RANS solvers are widely used in engineering practice because of their low computational cost, the precise limits of their applicability in crossflow configurations remain poorly defined. This work conducts a comprehensive numerical investigation that systematically compares steady RANS¿MRF predictions against time-accurate URANS simulations across a wide range of advanced ratios and rotor tilt angles. Rigorous validation of the computational framework against experimental data in axial and near-axial regimes demonstrates excellent agreement, with deviations below 5% in propulsive efficiency. The results clearly identify the operational envelope within which MRF-based steady models remain valid under non-axial inflow. In particular, the steady approach exhibits robust performance for low-to-moderate advance ratios, where global errors in thrust and power remain below 10% for ¿ =0.40. However, the fidelity of the method deteriorates sharply under extreme edgewise-flight conditions (¿ =0.70), in which the crossflow component dominates the aerodynamic field, the ¿frozen-rotor¿ assumption progressively loses mathematical consistency, and the solver may converge toward steady solutions that no longer represent a physically meaningful flow state. The URANS analysis further reveals two critical phenomena that cannot be captured by steady-state models. First, at high advance ratios, the retreating blade encounters an extensive region of reverse flow, which induces negative sectional thrust and strongly anharmonic load waveforms. This behavior has direct implications for structural design: the peak-to-peak amplitude of thrust oscillation in edgewise flight can exceed the mean thrust level, implying extreme cyclic loading and a high risk of high-cycle fatigue. Second, the simulations quantify the emergence of off-axis parasitic moments (pitching and rolling), which are negligible in vertical flight but reach magnitudes comparable to the total aerodynamic torque in forward-flight conditions. Taken together, these findings highlight the need for a hybrid-fidelity strategy in UAV propulsion analysis: employing steady RANS¿MRF within the validated domain for energetic assessments, while relying on time-accurate URANS for mandatory evaluation of structural loading, vibration, and control logic in critical high-speed regimes., This research was funded by [Ministerio de Ciencia, Innovacion y Universidades] grant number [MCIU/AEI/10.13039/501100011033] and [Universitat Politecnica de Valencia] grant number [PID2022-142018OA-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Analysis on the Influence of Rotor Configuration on Quad-Rotor Unmanned Aerial Vehicle Flight Performance

  • Brendan Hannu Patrick
  • Varela-Martínez, Pau
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
[EN] While fixed, unactuated rotor tilt is increasingly utilised in commercial multi-rotor unmanned aerial vehicles (UAV), its impact on forward flight performance remains poorly documented in the literature. The current work addresses this gap in the literature by systematically quantifying the performance trade-offs of rotor tilt across various airspeeds. Furthermore, a novel rotor configuration is proposed to mitigate some of the tilted rotor configuration¿s inherent drawbacks. The different configurations are evaluated using a computationally affordable numerical approach that combines steady-state computational fluid dynamics (CFD) simulations, a simple proportional¿integral (P¿I) trimming algorithm, and actuator disk rotor modelling (ADM). The findings reveal that the aircraft¿s power requirements can be reduced by more than 29% for airspeeds greater than 20 m/s, while its range can be increased by up to 22% with the alternative rotor configurations. However, the modifications were found to have a significantly lesser impact on endurance, as only a 2.9% increase is noted at best., This work was partly sponsored by grant PID2022-142018OA-I00 (ENOLA) and by grant PID2023-150573OB-I00 (AURORA) funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU. Brendan H. P. Mullen would like to acknowledge the financial support received through contract FPI-2022-S2-85552 of Subprograma 2 of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the effect of popular additive manufacturing technologies on the performance and noise emission of UAV propellers

  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Quintero-Igeño, Pedro-Manuel|||0000-0003-4373-2079
  • Varela-Martínez, Pau
  • Ramírez, Federico N.|||0000-0003-4525-0516
  • Cremades-Botella, Andrés|||0000-0002-7052-4913
[EN] Noise remains a major concern for the widespread employment of Unmanned Air Vehicles (UAVs) operations, especially in urban environments. Moreover, not only must overall noise levels be considered when analyzing the acoustic impact of UAVs, but noise quality based on the spectral content of the acoustic signal must also be considered due to the psycho-acoustic effect on the listeners. Additionally, as UAVs become widespread, the ability to perform field replacement of propellers using additive manufacturing (AM) is of increased interest to many operators. However, as different AM techniques become popular, their impact on performance and noise must be assessed. In this investigation, the effect of manufacturing characteristics, such as surface roughness and flexibility, on the propeller thrust, torque, and acoustic signature is explored through an experimental campaign, revealing differences depending on the selected technique. A numerical experiment is then performed to isolate the effect of flexibility and roughness on these characteristics., This work was partly sponsored by grant PID2022-142018OA-I00 Experimental and Numerical Optimization to Lower UAV Acoustical pollution (ENOLA) funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU. F. N. Ramírez is supported by grant PREP2022-000221 funded by MICIU/AEI/10.13039/501100011033 and by ESF Investing in your future . J. García-Tíscar also acknowledges the support of the Ministry of Science, Innovation and Universities through the José Castillejo grant CAS23/00244. Computational resources provided by the Sirius Scientific Computing Cluster at UPV. Funding for open access charge: CRUE-Universitat Politècnica de València.