Skip to main content

SINERGIAS DE FUNCIONALIZACION POR LASER E HIPERDOPADO PARA DISPOSITIVOS ESPECTRALMENTE SELECTIVOS-CSIC

PID2023-148178OB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon amorphization responses by combined irradiations with MeV ion beams and ultrashort laser pulses

  • Solana-Ramírez, Irene
  • Ynsa, M. Dolores
  • Agulló-Rueda, Fernando
  • Sánchez-Prieto, Jesús
  • Grojo, David
  • Siegel, Jan
  • García-Lechuga, Mario
7 pages, 4 figures, This work demonstrates a significant synergistic effect between MeV ion implantation and femtosecond laser irradiation in silicon amorphization. The achievable amorphization depth and the range of laser fluencies leading to amorphization is increased for implanted samples in comparison to pristine silicon. In Si(100) samples, prior to femtosecond laser irradiation (800 nm and 120 fs, or 1030 nm and 180 fs) ion-induced defects are produced with protons (0.6, 1 and 2 MeV) or Si-ions (2 MeV) at varying ion-irradiation fluences. Then, the investigated defects densities before laser irradiation range from low levels to levels approaching ion-induced amorphization (defects per atom, dpa, from 10<sup>–9</sup> to 0.1). The optimal pre-conditioning for subsequent femtosecond laser-induced amorphization is found at a moderate defect density level, dpa =10<sup>–5</sup>. Additionally, it is shown that the achievable spatial resolution of the synergistic material amorphization is determined by the high resolution of the focused ion irradiation, suggesting a potential pathway for high-resolution patterning based on laser-assisted techniques. However, at high defect densities (dpa ≈ 0.1), the synergistic effect diminishes, and femtosecond laser irradiation instead reduces disorder, indicating a defect-annealing effect rather than further amorphization., This work is part of the projects ULS_PSB (grants PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (grant PID2023–148178OB-C22) funded by MCIN/AEI/10.13039/501100011033 and HyperSolar (grant TED2021–130894B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056) and by the French National Research Agency (grant ANR-23-CE08–0029–03). Authors acknowledge the support from CMAM-UAM for the beam time (STD002/22, STD015/22, and STD024/23) and its technical staff support. Part of the work was conducted using LaMP facilities at LP3. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities vía a doctoral grant (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evidence of counter-propagating solidification fronts in silicon upon femtosecond laser induced amorphization

  • García-Lechuga, Mario
  • Sopeña, Pol
  • Grojo, David
  • Siegel, Jan
11 pages, 5 figures, 1 table, We have investigated the melting and solidification dynamics in crystalline silicon upon single-pulse fs laser irradiation at a wide range of laser wavelengths (UV-mid-IR), employing real-time reflectivity measurements with ns resolution. Combining the experimental data with a simple optical model, we show that for fs excitation of Si(111) at 3000 nm wavelength a counter-propagating solidification front is initiated at the surface that competes with a solidification front originated at the maximum melt depth, propagating toward the material surface. This is the first demonstration of a surface-initiated solidification process upon fs laser excitation. The relative contribution of the two propagating interfaces has been determined as a function of pulse fluence. This process is not observed for (100) orientation, although for both orientations an amorphous surface layer with a fluence-dependent thickness is obtained. The presence of a surface-initiated solidification process is also observed for 1030 nm irradiation wavelength and might be present at other wavelengths. The results contribute to the understanding of the solidification dynamics in ultrafast laser annealing processes and form the basis for improved control of the final material state, considering its crystalline structure and transformation depth., This work was conducted using LaMP facilities at LP3. It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (Project No. ILINK22056). It has been supported by the European Union’s H2020 program (Laserlab Grant No. 871124). This work is part of the projects HyperSolar (No. TED2021-130894B-C22) and HyperSpec (No. PID2023-148178OB-C22), financed by MCIN/ AEI/10.13039/501100011033 (Ministry of Science and Innovation/ State Agency of Investigation), and the European Union NextGenerationEU/PRTR, as well as it forms part of the national research grant (No. ANR-23-CE08-0029-03) from the French National Research Agency (ANR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of Cr implanted GaAs processed with ArF and Nd-YAG laser melting

  • Algaidy, Sari
  • Caudevilla, Daniel
  • Benítez-Fernández, Rafael
  • Duarte-Cano, Sebastián
  • Pérez-Zenteno, Francisco
  • García-Hernansanz, Rodrigo
  • San Andres, Enrique
  • García-Hemme, Eric
  • Olea, Javier
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, David
  • Del Prado, Alvaro
14 pages, 9 figures, 2 tables . -- Special Issue on Ultra-doped Semiconductors for Electronic, Photonic and Spintronic Applications, We present a detailed investigation on the properties of supersaturated GaAs using Cr implantation followed by nanosecond pulsed laser melting (PLM). A comparison between two different lasers was carried out (ArF and Nd:YAG). We have analyzed supersaturated samples by means of structural, electrical, optical, and optoelectronic techniques. Raman spectroscopy and Transmission electron microscopy results show a recovery of crystallinity after the PLM process. ToF-SIMS results reveal a Cr concentration above the solid solubility limit after the PLM process, featuring depth distribution depending on the type of laser used. The sheet resistance results obtained using van der Pauw configuration measurements show an activation of the implanted Cr in semi-insulating GaAs after PLM. Optical transmittance and Reflectance measurements show a sub-bandgap absorption (up to 10% for λ = 1250 nm) of the supersaturated GaAs:Cr related to the Cr incorporation, besides absorption induced by the PLM process itself. The origin of this sub-bandgap absorption has been analyzed by means of opto-electronic measurements revealing sub-bandgap photoresponsivity related to the absorption analyzed. The photoresponsivity measured below the bandgap originates from both the defects introduced by the PLM process and the states within the bandgap associated to the implanted Cr., This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under Grants PID2020-116508RB-I00, PID2023-149369OBC21 and PID2023-148178OB-C21/C22. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B-C21) funded by the Recovery and Resilience Facility of the EU. The authors would also like to acknowledge financial support from the Ministry of Education in the Kingdom of Saudi Arabia. F Pérez-Zenteno is also thankful for predoctoral contract from UCM (call CT58/21CT59/21). R Benítez-Fernández acknowledges the predoctoral contract from Comunidad Autónoma de Madrid (PIPF2023/ECO-30541). The authors would like to acknowledge the support of the regional government of Madrid through the Project 4EVERPV-CM (TEC-2024/ECO-72)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

“Seeing” Periodic Structures Emerge: Ultrafast Bright- and Dark-Field Microscopy During Femtosecond Laser Interference Patterning of Silicon

  • Solana-Ramírez, Irene
  • Siegel, Jan
11 pages, 5 figures, Micro- and nanopatterning of materials using ultrafast lasers has evolved into a powerful technology for device fabrication, largely owed to its versatility and single-step performance compared to conventional lithography techniques. Yet, for the ultimate optimization of the fabricated patterns, it is necessary to comprehend the complex transformation pathways of the material at the extreme excitation intensities used. Here, a method is reported to investigate these pathways for laser interference patterning with femtosecond temporal and sub-micrometer spatial resolution over the entire transformation window up to the nanosecond regime. Specifically, an ultrafast bright-field pump-probe microscopy setup combined with a line patterning system is developed to imprint amorphous and ablative line-like structures with a 2.2 µm period in crystalline silicon using single 800 nm, 120 fs laser pulses. This system provides direct access to the dynamics of free electron generation, melting, amorphization, and ablation as a function of pulse fluence. By adding a dark-field modality, the complex dynamics of structural elevation can be resolved and quantified. The technique can be applied to any material with polished surfaces, thus offering direct access to in situ studies of their individual transformation dynamics during laser patterning., This work is part of the projects HyperSpec (Grant No. PID2023-148178OB-C22) funded by MCIN/AEI/10.13039/501100011033,HyperSolar (Grant No. TED2021-130894B-C22) funded by MCIN/AEI/10.13039/501100011033, and the European Union NextGen-erationEU/PRTR, as well MATRIX-CM (TEC-2024/TEC-85) funded bythe Consejería de Educación, Ciencia y Universidades (Comunidadde Madrid, Spain)). This research was also supported by the Spanish Ministry of Education, Science, and Universities via a doctoral grant tothe first author (FPU23/01300, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct laser interference patterning meets laser-induced periodic surface structures: hybrid dual periodic laser patterning of semiconductors

  • Solana, Irene
  • Aiartza, Eneko
  • Chacon, Fernando
  • Siegel, Jan
18 pages, 11 figures, 2 tables, The fabrication of micro- and nanometric structures in semiconductors with ultrashort laser pulses offers enormous potential due to their tunable morphological, electronic and optical properties. Two well-established methods for this purpose are patterning based on laser-induced periodic surface structures (LIPSS) and direct laser interference patterning (DLIP). As both techniques rely on different physical phenomena, a combination of both approaches is feasible, allowing a wide range of opportunities for high-precision laser patterning by superimposing LIPSS in a DLIP pattern. Here, we report the fabrication of hybrid nanostructures in silicon and germanium by multipulse femtosecond laser irradiation (λ = 800 nm, τ = 120 fs) in a versatile DLIP configuration. This configuration allows control of the fringe modulation depth (100%-0%), the DLIP pattern type (fringes or dots) and their period (5 µm-1.25 µm). For fringe patterning, linear laser polarization either parallel or perpendicular to the DLIP fringes is used, leading to single or dual LIPSS with different periods along both plane directions depending on the irradiation conditions. These results show that this strategy allows us to achieve highly tunable LIPSS periods, far beyond the conventional scaling of λ, λ/2 and λ/4. The results reported here explore a promising new pathway for the fabrication of functional surfaces with controllable periods in two dimensions for a wide range of potential applications in relevant fields such as photonics and coating technologies., This work is part of the projects HyperSolar (TED2021130894B-C22), HyperSpec (PID2023-148178OB-C22), MATRIX-CM (TEC-2024/TEC-85) and ASSESS (TED2021-129666B-C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR. We acknowledge the service from the MiNa Laboratory at IMN. This research was supported by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant to the first author (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez-Fernández, Rafael
  • Gómez-Muñoz, Gonzalo
  • García-Hemme, Eric
  • Roca–Giménez, Núria
  • Cabello, Fátima
  • García-Pardo, Marina
  • Gonzalo de los Reyes, José
  • Solís Céspedes, Javier
  • Prado, Álvaro del
  • García-Lechuga, Mario
  • Olea, Javier
  • Siegel, Jan
  • Pastor, David
10 pages, 10 figures, In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiO<inf>x</inf> nano-decorations that can be useful to fabricate optoelectronic devices., This work has been supported by grant HyperSolar (TED2021130894B-C21 and TED2021-130894B-C22) funded by MICIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant HyperSpec (PID2023-148178OB-C21 and PID2023‑148178OB-C22) funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF/EU, grant MATRIX-CM ((TEC-2024/TEC- 85), funded by Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)). The support of the Regional Government of Madrid through the Project 4EVERPV-CM (TEC-2024/ECO-72) is acknowledged. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020- 116508RB-I00 and PID2020–117498RB-I00. R. Benítez-Fernandez acknowledges the predoctoral contract from Comunidad Autonoma de Madrid (PIPF-2023/ECO-30541). Authors want to acknowledge assistance from CAI de Tecnicas Químicas (Espectroscopía Raman y Correlacion) for the Raman measurements and CAI de Tecnicas Físicas (Implantaci on Ionica) from the Universidad Complutense de Madrid for the RTA processes. We also acknowledge ICTS-CNME (Madrid, Spain) for the SEM, TEM and STEM images, EDS and EDX characterization. Authors also acknowledge Servicio de Nanotecnología y Analisis de Superficies del CACTI de la Universidad de Vigo for ToF-SIMS measurements. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid femtosecond laser and ion-implantation processing for controlled, deep, high-efficiency ablation in fused silica

  • García-Lechuga, Mario
  • Levy, Yoann
  • Solana-Ramírez, Irene
  • Cabello, Fátima
  • Ynsa, María Dolores
  • Bulgakova, Nadezhda M.
10 pages, 9 figures, 2 tables, Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser–matter interactions where the local fluence determines the processing depth, often limiting control over feature geometry and efficiency. Here, we present a hybrid approach combining localized Au implantation (1.8 MeV Au<sup>2+</sup> ions) into SiO<inf>2</inf> samples with femtosecond laser irradiation (250 fs), effectively tuning the laser–matter interaction and resulting morphology. At both 515 nm and 1030 nm irradiation wavelengths, single-shot femtosecond pulses produce cylindrical craters with sharp edges and flat-bottom profiles. Independently of the fluence, these craters exhibit a constant depth of 550 nm, corresponding to the region of maximum Au concentration. The effect manifests already at moderate fluence (∼4 J/cm<sup>2</sup>) and yields high ablation efficiency, up to 15 µm<sup>3</sup>/µJ. The hybrid method also works effectively at lower implantation doses that preserve the excellent transmission of fused silica, offering a promising pathway for the high-quality fabrication of flat optical components such as binary phase masks, phase lenses, or fused-silica micromolds., This work is part of the Spanish National projects ULS_PSB (PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (PID2023-148178OB-C22) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056). The work of Y.L. and N.M.B. has been funded by a grant from the Programme Johannes Amos Comenius under the Ministry of Education, Youth and Sports of the Czech Republic SENDISO project No. CZ.02.01.01/00/22_008/0004596. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation and Coherent Propagation of Femtosecond-Laser-Induced Periodic Surface Structures (LIPSS) in Fluorine-Doped Tin Oxide: Control, Potential Applications, and Challenges

  • Gómez-Muñoz, Gonzalo
  • Ariza, Rocío
  • Núñez-Galvez, Fernando
  • López-Flores, Víctor
  • Cabello, Fátima
  • Sotillo, Belén
  • Prieto, Carlos
  • Gonzalo de los Reyes, J.
  • García-López, Francisco Javier
  • Fernández Sánchez, Paloma
  • López-Sánchez, Carmen
  • Solís Céspedes, Javier
16 pages, 13 figures, 1 table, We have analyzed the formation and coherent propagation of laser-induced periodic surface structures (LIPSS) upon fs-laser irradiation of fluorine-doped tin oxide (FTO) films. The aim is the generation of large electrical anisotropies in macroscopic areas for applications including laser-written transparent heaters, sensors, or substrates for electrically controllable wettability, among others. The films have been processed with high-repetition-rate (hundreds of kHz) fs-laser pulses at 1030 nm using different laser (fluence and pulse duration) and scanning parameters (speed and line overlap). Optimal LIPSS formation and coherent propagation are conditioned by the dynamic evolution of the F content in the laser-processed regions that can be controlled via processing parameters. However, the homogeneity in the spatial distribution of F in the microscale in the pristine samples can generate important issues that are carefully considered and discussed in the present work. Still, the formation of optically and electrically highly anisotropic surfaces for laser scanning speeds well above 1.0 m/s has been demonstrated, reaching electrical resistivity anisotropy factors of >103. Consequently, the potential development of large-area applications using LIPSS-structured FTO films seems feasible, as we have demonstrated by fabricating an efficient laser-written electrothermal transparent device as a proof-of-concept., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities (MICIU), the Spanish Research Agency (AEI- MICIU), and the European Regional Development Fund (ERDF) through grant numbers PID2023148178OB-C22 (HyperSpec) and PID2024-156974OB-C21 (SLIM-2P), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”. This research was also partially funded by the Consejeri a de Educación, Juventud y Deporte, Comunidad de Madrid through grant number TEC-2024/TEC-85 (MATRIX-CM). R.A. acknowledges the funding from a Marie Skłodowska Curie Postdoctoral grant (N° 101149132)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Near-infrared laser interference patterning of silver nanocomposite films: controlling spatial nanoparticle distributions for plasmonic coloring

  • Gonzalo de los Reyes, J.
  • García-Lechuga, Mario
  • Baraldi, G.
  • Philip, Alka
  • Siegel, Jan
[Data availability statement] All data that support the findings of this study are included within the article (and any supplementary files)., Nanocomposites formed by metal nanoparticles embedded in dielectric host matrices present exciting optical properties governed mostly by the material, size, shape and separation of the nanoparticles. This opens the opportunity to drastically change their optical response by controlled laser irradiation. Here, we demonstrate that laser-irradiation at 800 nm of thin nanocomposite films, consisting of non-spherical near-coalescence silver nanoparticles embedded in an ultrathin amorphous Al<inf>2</inf>O<inf>3</inf> matrix grown by pulsed laser deposition, leads to strong local color changes. Combined with laser interference patterning, this approach enables single pulse fabrication of parallel fringes and dot arrays with different colors and selectable periods in the range of 1–5 μm, which can be extended over large areas by sample scanning. We show that the transmission and reflectivity spectra of the fringes strongly differ from those of the unexposed film and can be tuned by changing the pulse duration, pulse number and fluence. Transmission electron microscopy on free-standing irradiated films shows that the observed spectral response is directly correlated to strong changes in the nanoparticle shape, distribution and size. The laser-coloring strategy proposed here can be applied to other metal systems for a range of applications, including optical encoding, data storage, and fabrication spectral filters., This work has been supported by Grants HyperSpec (PID2023-148178OB-C22) and SLIM-2P (PID2024-156974OB-C21), funded by MICIU/AEI/10.13039/501100011033, as well as by grant MATRIX-CM (TEC-2024/TEC-85), funded by Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)). Alka Philip acknowledges an FPI/PIF scholarship from MICIU/AEI/10.13039/501100011033. The authors want to acknowledge assistance from ICTS-CNME (Madrid, Spain) for the TEM measurements., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez Fernández, Rafael
  • Gomez-Munoz, Gonzalo
  • García Hemme, Eric
  • Roca Giménez, Nuria
  • Cabello, Fátima
  • García Pardo, Marina
  • Gonzalo, Jose
  • Solis, Javier
  • Prado Millán, Álvaro Del
  • GarciaLechuga, Mario
  • Olea Ariza, Javier
  • Siegel, Jan
  • Pastor Pastor, David
In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiOx nano-decorations that can be useful to fabricate optoelectronic devices.